|
Locking pliers will do the trick also
|
# ? Nov 17, 2011 06:41 |
|
|
# ? May 28, 2024 15:54 |
|
With respect to not buying a ratcheting screwdriver set, shouldn't I buy a set of screwdriver tools in some form so that I'll have random torx bits should I ever need them? Or was my original idea okay and I just need to avoid the ratcheting part?
|
# ? Nov 17, 2011 16:28 |
|
The ratcheting multi-bit sets are okay for the various sizes and odd bits, but be sure to get the common types in regular screw drivers. An average sized flat screwdriver and a #2 Phillips are essential.
|
# ? Nov 17, 2011 18:41 |
|
Josh Lyman posted:With respect to not buying a ratcheting screwdriver set, shouldn't I buy a set of screwdriver tools in some form so that I'll have random torx bits should I ever need them? Or was my original idea okay and I just need to avoid the ratcheting part? http://www.wishpot.com/product/craftsman-7-pc-torx-dual-material-fold-up-hex-key-set---46003/13534854 Sears also makes a foldup version for tamperproof torx if you need it. I suppose you could use tamperproof torx in regular torx screws, it just wouldn't be as strong.
|
# ? Nov 17, 2011 18:56 |
|
I don't get the hate for ratcheting multibit sets. I have a couple of them and they are very useful for miscellaneous things. Yeah, they aren't heavy duty and if I have anything that requires a lot of force to do, I'll use a real screwdriver. But they work perfectly for a variety of things and are generally useful. Also, they tend to be nearly as cheap as buying the bits separately.
|
# ? Nov 17, 2011 23:19 |
|
Cheap ratcheting screwdrivers are worse than cheap jig saws which is probably where the hate comes from but I have a couple nice ones that I love. One I found on the side of the road and it's a beast. The logos are all beaten off it but I think it's a Mac. Unfortunately it only has one double sided bit, with a straight and #2 Philips. My favorite that I lost had a L shaped handle which allowed a lot of leverage and was perfect for working on PCs.
|
# ? Nov 18, 2011 01:01 |
|
The venerable and inexpensive Buck Bros 6 in 1 is my screwdriver of choice dwoloz fucked around with this message at 02:11 on Nov 18, 2011 |
# ? Nov 18, 2011 02:08 |
|
dwoloz posted:The venerable and inexpensive Buck Bros 6 in 1 is my screwdriver of choice I buy the cheap harbor freight ones for use on the boats, perfect nut drivers.
|
# ? Nov 18, 2011 02:19 |
|
A quick question about Dewalt batteries. I understand that older tools that were designed for NiCad can use the newer Li-Ion batteries. I have an old cordless drill, the DC727. The batteries it came with have long since bit the dust, and the replacements I got are rapidly going the same way. This drill uses a 12V battery, but the only 12v Li-Ion I see (http://www.dewalt.com/tools/cordless-batteries-dcb120.aspx) uses a totally different form factor than the 12V NiCad. Am I out of luck for using LiIon batteries with this drill?
|
# ? Nov 18, 2011 21:43 |
|
stubblyhead posted:A quick question about Dewalt batteries. I understand that older tools that were designed for NiCad can use the newer Li-Ion batteries. I have an old cordless drill, the DC727. The batteries it came with have long since bit the dust, and the replacements I got are rapidly going the same way. This drill uses a 12V battery, but the only 12v Li-Ion I see (http://www.dewalt.com/tools/cordless-batteries-dcb120.aspx) uses a totally different form factor than the 12V NiCad. Am I out of luck for using LiIon batteries with this drill? Does Dewalt have a service email or phone? I bet they would be quick to sell you a new Li-ion batt if they can.
|
# ? Nov 18, 2011 22:47 |
|
stubblyhead posted:A quick question about Dewalt batteries. I understand that older tools that were designed for NiCad can use the newer Li-Ion batteries. I have an old cordless drill, the DC727. The batteries it came with have long since bit the dust, and the replacements I got are rapidly going the same way. This drill uses a 12V battery, but the only 12v Li-Ion I see (http://www.dewalt.com/tools/cordless-batteries-dcb120.aspx) uses a totally different form factor than the 12V NiCad. Am I out of luck for using LiIon batteries with this drill? Looks like you are SOL from what I see. But think about this, even if you were able to upgrade to Li-Ion. Assuming a Li-ion battery existed, a new charger would be needed I bet. So ~$30 and change each battery and and a charger would get you to around 100 bucks if you get 2 batteries. Buying a new 12V setup with 2 Li-Ion batteries is ~$130. Personally I would work with what you have and then replace the whole shebang when the batteries go. The next gen drills are on the horizon, brushless motors. So hold off to see what the price points on those will be. Milwaukee has some(Milwaukee Fuel) shipping in January. Also the current gen may get cheaper...
|
# ? Nov 19, 2011 21:35 |
|
You can get LiIon batteries for that model but it's going to be nearly as expensive as a new drill for two batteries and a charger. May as well upgrade to a newer model. If you don't, look at third-party retailers. Brush-less drills and drivers are here now. Makita's newest impact driver is brush-less. Hitachi has a drill that's been out for ages that's brush-less. Festool/Protool have brush-less models. Looking forward for others to follow.
|
# ? Nov 19, 2011 22:42 |
|
stubblyhead posted:A quick question about Dewalt batteries. I understand that older tools that were designed for NiCad can use the newer Li-Ion batteries. I have an old cordless drill, the DC727. The batteries it came with have long since bit the dust, and the replacements I got are rapidly going the same way. This drill uses a 12V battery, but the only 12v Li-Ion I see (http://www.dewalt.com/tools/cordless-batteries-dcb120.aspx) uses a totally different form factor than the 12V NiCad. Am I out of luck for using LiIon batteries with this drill? If you're handy with a soldering iron, you can probably replace the NiCads yourself and string it along a few more years.
|
# ? Nov 19, 2011 22:50 |
|
Josh Lyman posted:
That set is horrible and a complete waste of $15. The adjustable may be ok, but the pliers are all junk. When you go to squeeze something hard with them the handle grips slip and dont provide much leverage at all. Shell out the 39.96 and get a real set from channelock Channellock Ultimate Pliers Set 4-Piece http://www.homedepot.com/h_d1/N-5yc1v/R-100190542/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053 No adjustable wrench, but you can get a cheap one of those that'll make due.
|
# ? Nov 20, 2011 18:07 |
|
Error 404 NpH posted:That set is horrible and a complete waste of $15. The adjustable may be ok, but the pliers are all junk. When you go to squeeze something hard with them the handle grips slip and dont provide much leverage at all. http://www.harborfreight.com/6-piece-pliers-set-38082.html In a related question, I picked up a 19" Stanley toolbox from Target and it seems alright for $10, but it's not big enough to hold a cordless drill. Should I expect power tools to be kept in their own molded plastic containers? Josh Lyman fucked around with this message at 18:54 on Nov 20, 2011 |
# ? Nov 20, 2011 18:50 |
|
That harbor freight set is totally usable. The slipjoints are sort of loose compared with quality stuff, and the sidecutters will turn into mangled pieces of poo poo after some harder usage. Still worth the $10 e: on a related note, the Vise Grip Groovelock pliers are absolutely awesome. 10" v-jaw option is pretty much perfect. http://www.cycleworld.com/2011/06/14/irwin-vise-grip-groovelock-pliers-tool-time/ Hypnolobster fucked around with this message at 20:24 on Nov 20, 2011 |
# ? Nov 20, 2011 20:19 |
|
Josh Lyman posted:In a related question, I picked up a 19" Stanley toolbox from Target and it seems alright for $10, but it's not big enough to hold a cordless drill. Should I expect power tools to be kept in their own molded plastic containers? Most of them do come with a carrying case of some kind, so I'd just use that. Harbor freight's hands tools are ok I guess, no worse than the bargain brand at Lowe's anyway. I would be wary of anything from there that plugs in though.
|
# ? Nov 20, 2011 23:52 |
|
stubblyhead posted:Most of them do come with a carrying case of some kind, so I'd just use that. Harbor freight's hands tools are ok I guess, no worse than the bargain brand at Lowe's anyway. I would be wary of anything from there that plugs in though. As for a "cheap screwdriver set with an assortment of bits that won't replace proper screwdrivers", I found this at Home Depot. Slotted, philips, torx and square for $20 with a storage system for bits on the go? http://www.homedepot.com/h_d1/N-5yc1v/R-202397605/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
|
# ? Nov 21, 2011 00:16 |
|
Personally speaking, I do not buy any tools at HF. Even if you get store brands at places like Sears (Craftsman) or Ace Hardware the hand tools have lifetime replacement warranty. I simply don't want to deal with a cheap, broken or ineffective tool when I'm in the middle of a project. It's a waste of my time which is more valuable than the price of a quality tool upfront. Quality tools will last a lifetime. HF fills a need in the market for people who need light-use disposable tools. If that's you, then enjoy sending some more dollars to China and some more crap to a landfill. If you're going to actually use your hand tools and keep them the rest of your life, buy quality lines like Channellock, Klein, Crescent, Ridge Tool (RIDGID), some Irwins, etc. There's a reason those brands have been around since the mid 1800s.
|
# ? Nov 21, 2011 18:44 |
|
ibpooks posted:Personally speaking, I do not buy any tools at HF. Even if you get store brands at places like Sears (Craftsman) or Ace Hardware the hand tools have lifetime replacement warranty. I simply don't want to deal with a cheap, broken or ineffective tool when I'm in the middle of a project. It's a waste of my time which is more valuable than the price of a quality tool upfront. Quality tools will last a lifetime. I thought Craftsman is chinese as well, and HF hand tools also have lifetime warranty. I agree with you on more complex tools and anything electric, but for what I need, HF stuff is perfectly adequate.
|
# ? Nov 21, 2011 23:01 |
|
"Made in China" doesn't mean it's typical Chinese no-name bullshit. Almost every tool manufacturer makes stuff in China and the ones that don't probably buy a lot of parts from China. Chinese companies makes things according to specs and can do so as well as a high-end German company if you hand over enough money. That said I try to stay clear of HF-type tools as they usually break or are inaccurate. Even if I could buy five or ten no-name Chinese pliers for the price of a quality German one, I usually get the latter. If nothing else, it won't break on me when I need it and I don't have to contribute to the massive pollution due to cheap manufacturing. If you get no-name poo poo, get stuff with warranty. If it breaks, return it. This makes the product more expensive for the store and they may discontinue the bullshit tools. This may in turn lead to more quality tools being sold and prices drop from quantity production. Better tools at lower price. /end rant
|
# ? Nov 22, 2011 09:50 |
|
Ok I've been looking for a tool - A compass that is a ruler with one end a point that the ruler can rotate around and the other a sliding marker. Does anyone know the name of this? I can't seem to find one anywhere.
|
# ? Nov 22, 2011 10:44 |
|
Mercury Ballistic posted:I thought Craftsman is chinese as well Most Craftsman hand and garden tools are still made in the USA. Their power tools however are not. Antinumeric posted:Ok I've been looking for a tool - A compass that is a ruler with one end a point that the ruler can rotate around and the other a sliding marker. Does anyone know the name of this? I can't seem to find one anywhere. You're looking for a "beam compass", specifically a graduated one. There are measuring tape variants also. kid sinister fucked around with this message at 16:28 on Nov 22, 2011 |
# ? Nov 22, 2011 15:34 |
|
kid sinister posted:Most Craftsman hand tools are still made in the USA. Their power tools however are not. Ah ha! Thank you very much
|
# ? Nov 22, 2011 15:49 |
|
Iskariot posted:Chinese companies makes things according to specs and can do so as well as a high-end German company if you hand over enough money. Except that Chinese manufacturers routinely attempt to build under-spec and hide it, only issuing mea culpas when they get caught. All of the regulatory framework in the country is corrupt and supports the deception in every way they can. The whole approach is how can we do the least possible quality and not lose the contracts (which are negotiated with huge kickbacks and bribes). I'm not saying the USA and European manufacturers are angels, but there is a huge difference. ibpooks fucked around with this message at 22:22 on Nov 22, 2011 |
# ? Nov 22, 2011 22:20 |
|
I'm looking for the bets bench top drill press that <$200 can buy. I'm mainly going to use it for wood and a little aluminum and I don't mind it taking all day to drill through 1/8 steel as long as it will do it. Anyone know what I should look for?
|
# ? Nov 23, 2011 04:30 |
|
Circus Pies! posted:I'm looking for the bets bench top drill press that <$200 can buy. I'm mainly going to use it for wood and a little aluminum and I don't mind it taking all day to drill through 1/8 steel as long as it will do it. Anyone know what I should look for? I got one of these guys http://www.harborfreight.com/heavy-duty-16-speed-floor-drill-press-38144.html a while back and it has served me well. It's sub-200 if you get one of the easy to find 20-30% coupons. It's a decent induction motor that runs smoothly and relatively quietly. Mild steel is a cake walk to drill through, especially if you have decent bits and cutting fluid. edit: there's a benchtop version of that model for the same price
|
# ? Nov 23, 2011 08:08 |
|
ibpooks posted:Except that Chinese manufacturers routinely attempt to build under-spec and hide it, only issuing mea culpas when they get caught. All of the regulatory framework in the country is corrupt and supports the deception in every way they can. The whole approach is how can we do the least possible quality and not lose the contracts (which are negotiated with huge kickbacks and bribes). I'm not saying the USA and European manufacturers are angels, but there is a huge difference. My uncle used to work as an overseer for cruise ship construction. He traveled all over the world to keep work in check for his employer, China among them. My brother often goes to Korea to interact with a large construction company. There are vast cultural differences, some good, some bad.
|
# ? Nov 23, 2011 09:20 |
|
Iskariot posted:If you get no-name poo poo, get stuff with warranty. If it breaks, return it. This makes the product more expensive for the store and they may discontinue the bullshit tools. This may in turn lead to more quality tools being sold and prices drop from quantity production. Better tools at lower price.
|
# ? Nov 23, 2011 17:25 |
|
Suggestions for a low-priced right-angle drill? Cordless is fine, but not needed.
|
# ? Nov 23, 2011 18:45 |
|
taqueso posted:Suggestions for a low-priced right-angle drill? Cordless is fine, but not needed. I bought a right angle attachment for my power drill. It was 20 or 30 bucks, but it works like a champ. Maybe look into that. Big box stores have them in the bit section.
|
# ? Nov 24, 2011 05:09 |
|
With all this talk about good/crappy pliers I need to mention Knipex. For the longest time I was buying the Canadian Tire specials, until I finally broke down and purchased a few different Knipex pliers. No comparison, the tools ooze quality and now I can never go back to the cheap stuff.
|
# ? Nov 24, 2011 07:32 |
|
therunningman posted:With all this talk about good/crappy pliers I need to mention Knipex. Any German brand is way nicer than anything made here.
|
# ? Nov 24, 2011 18:39 |
|
sharkytm posted:Any German brand is way nicer than anything made here. German tools are my FAVORITE. However they will make you broke rather quickly... Wera, Wiha, Knipex, Hazet, NWS, Metabo, ect are my brands of choice.
|
# ? Nov 24, 2011 20:19 |
|
Are those... Wera bottle openers? I must have one now! Bosch made bottle openers using their new grinder handle with vibration reduction. They were pretty neat.
|
# ? Nov 25, 2011 10:23 |
|
Josh Lyman posted:I realize Harbor Freight != quality, but if the handles are an issue, maybe I should consider these for $10? On a limited budget I'd definitely put those ahead of the husky set you posted. They aren't as good as the real things but they are at least useful for light jobs. Also its the cordless tools from harbor freight that are junk, some of the corded ones are quite nice and well worth the price. I have an awesome tile bridge saw from there, works flawless. I bought a real blade for it instead of the harbor freight blade, and it cut through porcelain tile and travertine beautifully.
|
# ? Nov 25, 2011 16:46 |
|
Their tile saw is indeed awesome. I did all the cutting for my glass time backsplash with one. Just put on a decent blade and away you go.
|
# ? Nov 25, 2011 18:08 |
|
jackyl posted:I bought a right angle attachment for my power drill. It was 20 or 30 bucks, but it works like a champ. Maybe look into that. Big box stores have them in the bit section. Any downsides to an adapter? It seems like the perfect solution.
|
# ? Nov 25, 2011 18:10 |
|
taqueso posted:Any downsides to an adapter? It seems like the perfect solution. Right-angle drills usually have a fair amount of power behind them, but if all you're doing is putting holes in 2x4s in tight spaces, then it will probably be just fine.
|
# ? Nov 26, 2011 07:31 |
|
|
# ? May 28, 2024 15:54 |
|
Saw this browsing Sears. Future of ratchets? http://www.sears.com/shc/s/p_10153_12605_00931088000P?mv=rr
|
# ? Nov 27, 2011 07:16 |