|
Bogatyr posted:Worked with a guy years ago that was complaining that his little generator was broken. Tiniest generator ever, like a weed wacker engine, 800 watts or something. When he tried to use it to power his 1100 watt heat gun it stalled the motor almost instantly. There was an audience when he was explaining his woes at his tailgate and demonstrating. There was a bit of silence before someone piped up and explained it to him. Smallest generator ever only powers tiniest violin playing saddest tune
|
# ? May 14, 2022 15:54 |
|
|
# ? May 31, 2024 00:51 |
|
https://www.amazon.com/ttgo
|
# ? May 14, 2022 17:16 |
|
Home Depot had a sale on the DeWalt DW735X planer a few weeks ago for almost 50% off, and I didn't buy it and now I keep checking the homepage every day to see if the sale is back on again. I would've said something about it in this thread when it happened, but I was probed at the time.
|
# ? May 14, 2022 18:01 |
|
Mr. Mambold posted:Smallest generator ever only powers tiniest violin playing saddest tune It was around 99/2000 and outside of some lighting. I can't think of what use it would have been in a construction situation.The smallest power tool would have been a Milwaukee drill motor. It would have choked on that as well. I could see a use now for charging tool batteries.
|
# ? May 14, 2022 19:23 |
|
idk why but I just didn't like dewalts oscillating tool at all here. The hand feel just irked me. The weight distribution and hand feel was blegh, and it didn't perform anywhere near as quick as my Milwaukee. not a bad tool if you're only using it rarely but otherwise i really couldn't recommend it.
|
# ? May 16, 2022 07:33 |
|
I. M. Gei posted:I bought the drill and I regret nothing Trip Report: Drill is good, but now I want the M18 impact driver. I don't even need a new impact driver, but for some reason I want it anyway.
|
# ? May 16, 2022 20:03 |
|
Just take a loan against your house and get that driver!!
|
# ? May 17, 2022 02:14 |
|
if you really wanna buy tools w money that you shouldnt spend i'd recommend getting vintage corded classics, at least they'll hold their value and maybe even apprciate get a US made hole hawg
|
# ? May 17, 2022 12:07 |
|
After years of bodged-together solutions for when I'd make frames, I finally sprung for a point driver: This thing is great! It's the kind of tool which will never pay for itself (unless you're selling frames) but it absolutely saves time and effort.
|
# ? May 17, 2022 15:46 |
|
You can also find vintage all metal ones for sale. I bought this for under $90 off of eBay and it works fine:
|
# ? May 17, 2022 16:09 |
|
Ooh, that's really nice. Also the kind of tool whose purpose it would take me embarrassingly long to figure out. Looked some up -- do the vintage ones drive the heavy-duty glazing points or the thin ones which are purely for holding in the art and the backing? The gun I got is for the latter, since I never really need anything stronger.
|
# ? May 17, 2022 18:28 |
|
Trabant posted:Ooh, that's really nice. Also the kind of tool whose purpose it would take me embarrassingly long to figure out. I bought this one for the big glazing points, but if i recall correctly it will drive the smaller diamonds as well.
|
# ? May 17, 2022 18:45 |
|
I. M. Gei posted:I bought the drill and I regret nothing Same, but only after watching my wife go through two 1.5aH batteries in the oscillating tool while cleaning up a door. Those 5s will be nice.
|
# ? May 18, 2022 04:07 |
|
Tool Thread: only after watching my wife go through two 1.5aH batteries in the oscillating tool
|
# ? May 18, 2022 16:16 |
|
|
# ? May 18, 2022 17:03 |
|
What's the best way to drill a ~2" diameter hole through cinderblock? I need to some PVC through a wall. I have an SDS hammer and could drill a few small holes, but I didn't know if there was like, a concrete hole saw for an SDS or something.
|
# ? May 18, 2022 17:45 |
|
For 2" you should be able to get a hole saw for an SDS, otherwise may need to rent an SDS max.
|
# ? May 18, 2022 18:05 |
|
Kaiser Schnitzel posted:What's the best way to drill a ~2" diameter hole through cinderblock? I need to some PVC through a wall. I have an SDS hammer and could drill a few small holes, but I didn't know if there was like, a concrete hole saw for an SDS or something. If you know you won't hit the web in the middle of the block, drilling small holes and chipping out the circle works great
|
# ? May 18, 2022 18:07 |
|
I am trying to put together a drill block jig and the aluminum spacers I got for the holes are apparently not durable enough to stand up to my drill bits. To make matters worse, the bit and spacer size I need is #6 (9/64") and the only bits Home Depot and Lowes seem to have in that size are countersink bits that go through both wood and metal; ideally the bit I need would drill through wood but not metal. Can any of you point me to a #6 or 9/64" spacer that'll stand up to a drill bit without getting bored bigger by it? And/or a drill bit in the same size that's tough enough for wood but won't widen the inside of a metal spacer? EDIT: The jig-making book I got recommends using bronze spacers/bushings for stuff like this, but I can't find any of those in the size I need. Would these 18-8 stainless steel spacers from BoltDepot.com work? I. M. Gei fucked around with this message at 20:25 on May 18, 2022 |
# ? May 18, 2022 19:52 |
|
McMaster to the rescue https://www.mcmaster.com/drill-bushings/id~0-1406/
|
# ? May 18, 2022 20:33 |
|
Kaiser Schnitzel posted:What's the best way to drill a ~2" diameter hole through cinderblock? I need to some PVC through a wall. I have an SDS hammer and could drill a few small holes, but I didn't know if there was like, a concrete hole saw for an SDS or something. There is most likely a concrete hole saw for sds, in that size. If there isn't, you can just rent an SDS max + the appropriate size saw bit. My company has a six inch diameter in SDS max so smaller should definitely exist. Or you could rent a concrete coring setup and a 2 inch bit for it.
|
# ? May 18, 2022 22:20 |
|
oXDemosthenesXo posted:McMaster to the rescue hooooooooooly fuckin lord at those prices well I guess drill-resistant bushings don't come cheap (apparently )
|
# ? May 19, 2022 05:49 |
|
I. M. Gei posted:hooooooooooly fuckin lord at those prices McMaster has literally everything, but if you need one of it, it's gonna be expensive as hell.
|
# ? May 19, 2022 06:28 |
|
This drill block has a 9/64" hole, which according to my Googling is equivalent to a #6 https://smile.amazon.com/dp/B0061FY004/ref=cm_sw_r_apan_i_EJPT7A5407HDZENSJVT0
|
# ? May 19, 2022 11:46 |
|
https://www.leevalley.com/en-ca/shop/hardware/jig-and-fixture-parts/40089-drill-guide-bushings is what you need. Just use the 1/8th bit instead of whatever they say on your poo poo.
|
# ? May 19, 2022 18:04 |
|
I. M. Gei posted:hooooooooooly fuckin lord at those prices Good tools aren't cheap But yeah McMasters model is to stock everything imaginable and deliver lightning fast, but then charge 50% more than normal retail. Sometimes it's worth it to avoid the hassle and risk of buying from Amazon.
|
# ? May 19, 2022 18:43 |
|
I. M. Gei posted:I am trying to put together a drill block jig and the aluminum spacers I got for the holes are apparently not durable enough to stand up to my drill bits. To make matters worse, the bit and spacer size I need is #6 (9/64") and the only bits Home Depot and Lowes seem to have in that size are countersink bits that go through both wood and metal; ideally the bit I need would drill through wood but not metal. What are you using this for?
|
# ? May 19, 2022 19:44 |
|
Mr. Mambold posted:What are you using this for? To build a steam box to straighten a board.
|
# ? May 19, 2022 21:26 |
|
I'd recommend working on drilling technique before laying down cash, practice drilling straight without putting side pressure on the drill. I can usually get a lot of use out of a plain old wooden drilling blocks, so it's concerning that you're wearing out metal ones so quickly.
|
# ? May 19, 2022 21:40 |
|
This is a person who can't operate a tape measure. And is so bad at taking suggestions they went out shopping for measuring standards to do something - whether it was to prove the tape measure was wrong or to build a better tape measure I can't recall. I believe it was the same person who broke one or more drills trying to drill a simple fastener-sized hole (think like a regular tapcon) in a masonry wall. Either way, there is no way to help this goon. Anything they are attempting to do is going to be with a fundamental lack of research or awareness of how someone would go about the thing they are trying to do.
|
# ? May 19, 2022 22:22 |
|
Motronic posted:This is a person who can't operate a tape measure. And is so bad at taking suggestions they went out shopping for measuring standards to do something - whether it was to prove the tape measure was wrong or to build a better tape measure I can't recall. I believe it was the same person who broke one or more drills trying to drill a simple fastener-sized hole (think like a regular tapcon) in a masonry wall.
|
# ? May 19, 2022 22:29 |
|
I thought he'd gotten better. But also, yeah. Have been drilling hobby/homeowner things my entire life and have never felt the need for a bushing. What's your use case, I.M.?
|
# ? May 19, 2022 22:39 |
|
Remind me to never get on Motronic's bad side.
|
# ? May 19, 2022 22:41 |
|
stealie72 posted:I thought he'd gotten better. It's the same M.O. as always. Drift into a thread and ask a very specific question about a very specific thing that is then revealed to be part of a rube goldberg version of a thing they are trying to build in support of a project that they're already doing the wrong way. The latest schtick seems to revolve around this whole steaming boards thing, and I can't quite remember why this is "necessary", but it's all so amazing that I'm having a hard time believing it's not an elaborate troll.
|
# ? May 19, 2022 22:42 |
|
I’m generally curious about steaming this board to make it straight. Was it discussed in the woodworking thread? The easiest way to make a steam box that I’ve found is to buy a big pvc pipe and put caps on the ends. DO NOT glue the caps on.
|
# ? May 19, 2022 22:50 |
|
jesus christ Motronic
|
# ? May 19, 2022 23:09 |
|
I. M. Gei posted:jesus christ Motronic You brought this on yourself. You described trying to drill into brick as "like a girl loving a floor dildo". You admitted going into debt to buy a loving drill that we told you you didn't need because a hex shank spade bit chucked in your existing drill wobbled. You've spent like $3000 on tools in this thread, but needed to use vise grips to tighten the knobs on a feather board. You also asked about the cheapest benchtop jointer in existence. You're either the forum's most incompetent craftsman with zero impulse control or an elaborate troll. Jesus Christ yourself.
|
# ? May 19, 2022 23:37 |
|
sharkytm posted:You described trying to drill into brick as "like a girl loving a floor dildo". lmao
|
# ? May 19, 2022 23:41 |
|
I. M. Gei posted:jesus christ: Motronic We'll ask again.. what are making, why can't you use a drill block, why can't you drill straight? As mentioend you kind of float into the thread with a vague idea of waht you're wanting and get vague advice.
|
# ? May 19, 2022 23:42 |
|
|
# ? May 31, 2024 00:51 |
|
Motronic posted:This is a person who can't operate a tape measure. And is so bad at taking suggestions they went out shopping for measuring standards to do something - whether it was to prove the tape measure was wrong or to build a better tape measure I can't recall. I believe it was the same person who broke one or more drills trying to drill a simple fastener-sized hole (think like a regular tapcon) in a masonry wall. Oh boy, I didn't recognize this goon's name without the avatar. I still get a good laugh about that apple tree trellis that needed to be consistent to one thousandth of an inch.
|
# ? May 20, 2022 00:22 |