|
evol262 posted:eBay servers were always cheap. They're also loud power hogs. Have you heard a C6100? The bigger servers are pretty nice, a DL380 Gen 8 is pretty quiet. 1U servers are usually loud, 2U is much better. The Nexus switches we have sound like they are always on the verge of taking off.
|
# ? Jun 23, 2017 12:45 |
|
|
# ? May 19, 2024 15:30 |
|
Mr Shiny Pants posted:The bigger servers are pretty nice, a DL380 Gen 8 is pretty quiet. 1U servers are usually loud, 2U is much better. 2U is tolerable in a garage or basement. You'll probably hear 1U through the entire house. The "3 systems in 1 chassis" like the c6100 are some of the loudest I've ever heard.
|
# ? Jun 23, 2017 13:53 |
|
Getting started on a lab so I can go from helpdesk to "why the gently caress is this goddamn thing so loud" I know the OP pretty much starts with Sepist posted:YOU DO NOT NEED TO GO BUY A DELL POWEREDGE TO RUN VM'S! THEY'RE NOISY, HOT, POWER HUNGRY, AND NOISY. Seriously, you'd be better off with a quad i5/i7 and a lot of RAM. but work is getting rid of R710s for $20 and that's a lot cheaper than building a system. Plus, I've wanted a rack server since Apple released the Xserve so gently caress you dad.
|
# ? Jun 30, 2017 02:33 |
|
God why do you people keep buying servers you confuse me so much. Just slap a bunch of memory in whatever desktop you're already using, call it LAB1, do the same thing for LAB2 down the line, hook them to a switch, and that's your lab. e: this post has been made from
|
# ? Jun 30, 2017 02:43 |
|
not ECC RAM I take it?
|
# ? Jun 30, 2017 02:59 |
|
If you have never gotten hands on with rack mount gear ever, and won't have the chance at work, there is some value in that I guess. Take the thing apart and put it back together a few times. Marvel at how cool and good hot swappable parts are. I just ripped out a hard drive or PSU, and the thing stayed up!! Then check your power bill, or realize you can hear the thing running from across the street. Resell it on eBay and build a bigger lab out of desktops or NUCs. Is there an IT work room/lovely closet at your office where you could stash the thing and mess with it, instead of having to run it in your home?
|
# ? Jun 30, 2017 04:39 |
|
MC Fruit Stripe posted:God why do you people keep buying servers you confuse me so much. Just slap a bunch of memory in whatever desktop you're already using, call it LAB1, do the same thing for LAB2 down the line, hook them to a switch, and that's your lab. My only personally owned computer is a MBP and $20 is $20. Docjowles posted:If you have never gotten hands on with rack mount gear ever, and won't have the chance at work, there is some value in that I guess. Take the thing apart and put it back together a few times. Marvel at how cool and good hot swappable parts are. I just ripped out a hard drive or PSU, and the thing stayed up!! It's not as loud as I thought it would be (outside of booting) and once it get it set up, it's going into the basement where I'll only ever look at it if I'm upgrading something on it. As for power... well yeah, I can't really argue there. Use plebes on the helpdesk don't have many options for setting up our own stuff at work so it has to live at home
|
# ? Jun 30, 2017 05:48 |
|
Docjowles posted:If you have never gotten hands on with rack mount gear ever, and won't have the chance at work, there is some value in that I guess. Take the thing apart and put it back together a few times. Marvel at how cool and good hot swappable parts are. I just ripped out a hard drive or PSU, and the thing stayed up!! This. $20 for an R710 is a hot deal. Buy and resell, then build a lab out of NUCs or whatever.
|
# ? Jul 1, 2017 03:31 |
|
Also I just realized that I left "get super drunk, order a set of rails at random, and force them into the rack any way you can" off the list of important rackmount server activities. Because lord knows whoever built the racks you're going to be servicing some day did exactly that. Coming out of the data center looking like you just lost a bare-knuckle boxing match is a critical career milestone.
|
# ? Jul 1, 2017 04:17 |
|
Docjowles posted:Also I just realized that I left "get super drunk, order a set of rails at random, and force them into the rack any way you can" off the list of important rackmount server activities. Because lord knows whoever built the racks you're going to be servicing some day did exactly that. Coming out of the data center looking like you just lost a bare-knuckle boxing match is a critical career milestone. I'm a big fan of the "rails don't fit, guess we will just set it on top of this other thing that's mounted with working rails" approach where you end up with one set of rails supporting four or five pieces of equipment.
|
# ? Jul 1, 2017 05:10 |
|
big money big clit posted:I'm a big fan of the "rails don't fit, guess we will just set it on top of this other thing that's mounted with working rails" approach where you end up with one set of rails supporting four or five pieces of equipment. Docjowles posted:Also I just realized that I left "get super drunk, order a set of rails at random, and force them into the rack any way you can" off the list of important rackmount server activities. Because lord knows whoever built the racks you're going to be servicing some day did exactly that. Coming out of the data center looking like you just lost a bare-knuckle boxing match is a critical career milestone. I have had to do both of these things. I've also had to force rails somewhat because the idiot before me used the wrong rails and mangled the rack so the new rails didn't fit quite right. As for sitting stuff ontop of other stuff, I've had to do that myself, but I did go back a week later and fix it up properly!
|
# ? Jul 1, 2017 16:55 |
|
Yo, there is an intel UNC (skull-evily version) NUC6i7KYK coming up on prime sale for those looking for a cheap box to do stuff on https://smile.amazon.com/dp/B01DJ9XS52
|
# ? Jul 12, 2017 01:06 |
|
I'm looking for a layer 3 switch with four 10g SFP+ ports in addition to regular copper 1G ports. I see some Juniper boxes that look good but I'm cautious because I assume L3 features are license based so I'd prefer not to drop a grand only to find out the box doesn't have the appropriate licensing. Is this assumption correct, and are there any other options I'm not thinking of? I'm running Ubiquiti gear currently but I'm not married to it by any means.
|
# ? Sep 21, 2017 19:02 |
|
What L3 features do you need? 4x 10Gb and 48x 1Gb switches are pretty common now, there must be a specific Broadcom chipset and reference design that makes them easy to do and dirt cheap.
|
# ? Sep 21, 2017 19:31 |
|
I'm not really doing anything crazy. Pretty much if it can do basic routing and OSPFv2 I'd be set.
|
# ? Sep 21, 2017 19:44 |
|
Do you hate HP? https://www.hpe.com/us/en/product-catalog/networking/networking-switches/pip.overview.networking-switches.1008995546.html
|
# ? Sep 21, 2017 19:52 |
|
H2SO4 posted:I'm looking for a layer 3 switch with four 10g SFP+ ports in addition to regular copper 1G ports. I see some Juniper boxes that look good but I'm cautious because I assume L3 features are license based so I'd prefer not to drop a grand only to find out the box doesn't have the appropriate licensing. Is this assumption correct, and are there any other options I'm not thinking of? I'm running Ubiquiti gear currently but I'm not married to it by any means. EX switches do not require a license for L3. JunOS is really good, you should give them a shot.
|
# ? Sep 21, 2017 20:03 |
|
big money big clit posted:EX switches do not require a license for L3. JunOS is really good, you should give them a shot. I was kind of hoping that was the case, but when looking at the datasheet I see stuff like quote:"An optional enhanced license is available for supporting on the EX2300 datasheet.
|
# ? Sep 21, 2017 21:50 |
|
I have setup some EX 2200-C doing OSPF for testing, just got a warning on commit about the license, still functioned fine.
|
# ? Sep 21, 2017 22:19 |
|
If it needs a license then can you not just buy it with the license? Am I missing something obvious?
|
# ? Sep 21, 2017 22:23 |
|
Thanks Ants posted:If it needs a license then can you not just buy it with the license? Am I missing something obvious? Nobody sells used enterprise network gear with licenses.
|
# ? Sep 21, 2017 22:47 |
|
Ah OK, sorry it wasn't clear that you wanted it used. I think you might struggle slightly because the integrated SFP+ stuff hasn't quite been around long enough for people to be getting rid of. What pricing are you seeing for 3750X with IP Services and the SFP+ module card? Junos is much nicer than the classic IOS that will run though.
|
# ? Sep 21, 2017 22:56 |
|
Hmm, I'm seeing 775 for a 3750x with the 10G card installed, I might throw a lowball out and see what happens. That's just with IP Base though - the feature sets are all based on license and not different firmware images anymore right? If so I'm looking at about $1500 for one running IP Services. I am in the middle of cranking out a CCNP so it wouldn't hurt to have some Cisco in the playground.
H2SO4 fucked around with this message at 19:39 on Sep 22, 2017 |
# ? Sep 22, 2017 19:33 |
|
Force10 S4810P. 48 copper 1gig and four QSFP+ that can be adapted down to 16x SFP+. I've gotten them as cheap as $1200.
|
# ? Sep 23, 2017 01:07 |
|
Not that it matters for a home lab, but has Force10 stuff gotten better? At my last job we had some old Force10 gear and it was Real Bad. Lots of weird bugs, and features that did not behave at all how the documentation indicated they should. Granted this was like 2014 and the devices were already 3-4 years old at that time, so I'd hope they've improved somewhat in the last 7 years. We ripped them all out for Juniper QFX series and never looked back.
|
# ? Sep 23, 2017 01:53 |
|
Docjowles posted:Not that it matters for a home lab, but has Force10 stuff gotten better? At my last job we had some old Force10 gear and it was Real Bad. Lots of weird bugs, and features that did not behave at all how the documentation indicated they should. Granted this was like 2014 and the devices were already 3-4 years old at that time, so I'd hope they've improved somewhat in the last 7 years. We ripped them all out for Juniper QFX series and never looked back. They got bought by Dell. I have original Force10 stuff from before the acquisition that's fine. The S4810 is one of those. Stuff like the S60 and S25 are a little suspect especially at this point. The new Dell switches are pretty serviceable (N3048).
|
# ? Sep 23, 2017 04:31 |
|
I decided to bite the bullet and just get a 3750x with ip services license and the 10Gb module. I, however, completely missed the fact that the 10Gb module doesn't provide four 10Gb ports. It provides two SFP and two SFP+ ports, meaning it only actually has two Te interfaces. I have four nodes I was planning to connect via 10Gb and eliminate the two other switches that are currently there. I went Cisco since I'm going through a CCNP study program and figured it'd be worth it to get some real world exposure in my lab. gently caress. Are there any IOS platforms that have four ten gigabit interfaces I should be looking for? It looks like the 4948 has four SFP+ ports and are way cheaper even with ES images. They appear to be decent and have full IP routing support, so what am I missing?
|
# ? Oct 11, 2017 01:35 |
|
I said this earlier about Juniper gear, unsure why you would care for home use.Juniper posted:In fact, all EX licenses are soft enforced, which means that they are not actually needed to run the features. https://kb.juniper.net/InfoCenter/index?page=content&id=KB24321
|
# ? Oct 11, 2017 05:44 |
|
Moey posted:I said this earlier about Juniper gear, unsure why you would care for home use. Yeah, I remember. I'd definitely be down for expanding into juniper gear since I've heard people love it but I want to have at least a little Cisco so that I can reinforce the CCNP stuff in my lab instead of just running through virtual labs.
|
# ? Oct 11, 2017 07:38 |
|
|
# ? May 19, 2024 15:30 |
|
H2SO4 posted:Yeah, I remember. I'd definitely be down for expanding into juniper gear since I've heard people love it but I want to have at least a little Cisco so that I can reinforce the CCNP stuff in my lab instead of just running through virtual labs. Ah yes, then carry on.
|
# ? Oct 12, 2017 01:58 |