|
Tentacle Party posted:Bel-Ray Superclean It is really, really good for not flinging off. Buuuuuuuuut.... It turns into loving gummy poo poo after a short while, and holy crap, does it ever bind well with sand/dirt/grime/wildlife. I now just relegate it to use on my track bike, as I can't have anything flinging off where it could gently caress someone else's day up, but on all my other bikes, I'm using gear oil, fling off be damned.
|
# ? Mar 14, 2009 17:59 |
|
|
# ? May 9, 2024 22:46 |
|
Simkin posted:It is really, really good for not flinging off. Buuuuuuuuut.... It turns into loving gummy poo poo after a short while, and holy crap, does it ever bind well with sand/dirt/grime/wildlife. I now just relegate it to use on my track bike, as I can't have anything flinging off where it could gently caress someone else's day up, but on all my other bikes, I'm using gear oil, fling off be damned. I run gear oil on the track. Hell, I used 30w motor oil last time because I neglected to bring gear oil. As long as wipe off your chain nicely, you're not going to fling off in such a fashion as to cause a bad day for anyone. If you're super paranoid about it, just lube it the day before, and lay some towels down to catch it as it drips off. Then wipe it down one last time at the track and you're good to go. Z3n fucked around with this message at 19:44 on Mar 14, 2009 |
# ? Mar 14, 2009 18:32 |
|
Fair enough. I probably will do likewise, as I think I'm out of that Bel-Ray stuff, and it always left nasty white overspray on everything. Oh, also, I have to roll the bike over gravel/sand, so an oiled chain would probably pick up less crap.
|
# ? Mar 14, 2009 18:40 |
|
I'm telling you guys, try the Dupont Teflon stuff. No dripping, no flinging and no picking up poo poo or turning into a gummy mess. It's the most painless way possible to maintain a chain.
|
# ? Mar 14, 2009 18:46 |
|
Sure, but does it cost $6 for a bottle that will last for the better part of a year?
|
# ? Mar 14, 2009 18:55 |
|
Simkin posted:Sure, but does it cost $6 for a bottle that will last for the better part of a year? $4.98 http://www.lowes.com/lowes/lkn?action=productDetail&productId=213197-39963-D00110101
|
# ? Mar 14, 2009 19:05 |
|
Hrm. I'll have a look when I'm out next time.
|
# ? Mar 14, 2009 19:28 |
|
Simkin posted:Hrm. I'll have a look when I'm out next time. It's also great for lubing about a million other things on your bike and in your garage/house. I use it constantly. The fact that it's a dry wax that stays put and that nothing sticks to makes it better than just about anything else out there, in my opinion.
|
# ? Mar 15, 2009 01:52 |
|
^^^ I used it for the window regulators and lock linkages in my BMW 2002... Never have they been so smooth.
|
# ? Mar 15, 2009 03:03 |
|
MourningGlory posted:Dupont Teflon stuff. Sold. Seems like its a bit hard to source down under but supposedly it can be found in boating stores. Will definitely give it a go. No fling and no dirt attraction would be perfect for my polished rims
|
# ? Mar 15, 2009 03:17 |
|
Did some things to the SV today. 1) Vortex gas cap and base 2) MOTOSLIDERS LOL 3) New oil and oil filter! Next project is new chain, sprocket, new perch for the clutch and....about a billion other things.
|
# ? Mar 15, 2009 04:41 |
|
Loosened my clutch cable at both ends, took it out of the lever, and lubed it with a pressure cable luber. Reinstalled and adjusted back to correct engagement - BUT! Now, while rolling, the clutch makes a rapid ticking noise that varies directly with speed. It does this in any gear and in neutral, with the engine on or off. Anybody experienced this before or have any ideas?
|
# ? Mar 20, 2009 16:08 |
|
TheUltimateCool posted:Loosened my clutch cable at both ends, took it out of the lever, and lubed it with a pressure cable luber. Reinstalled and adjusted back to correct engagement - BUT! Clutch on my ZX600 will make a tapping noise if the cable is too tight.
|
# ? Mar 20, 2009 16:29 |
|
Has anyone put hard panniers/saddlebags on their 2nd gen SV? I want to do some touring and I'm just looking for input from anyone that may have already slogged through the options. If it matters, my exhaust is stock and any aftermarket pipe I might put on the bike will stay in the stock location.
|
# ? Mar 20, 2009 17:17 |
|
Fixed it! Not sure what was going on, but I re-adjusted it from scratch and cleaned/lubed the chain. One of those did the trick.
|
# ? Mar 20, 2009 18:25 |
|
MourningGlory posted:Has anyone put hard panniers/saddlebags on their 2nd gen SV? I want to do some touring and I'm just looking for input from anyone that may have already slogged through the options. MourningGlory posted:Has anyone put hard panniers/saddlebags on their 2nd gen SV? I want to do some touring and I'm just looking for input from anyone that may have already slogged through the options. I use cortech sport touring saddlebags. If you look in the SA relay posts you can see them on my sv.
|
# ? Mar 20, 2009 22:04 |
|
MourningGlory posted:Has anyone put hard panniers/saddlebags on their 2nd gen SV? I want to do some touring and I'm just looking for input from anyone that may have already slogged through the options.
|
# ? Mar 21, 2009 00:36 |
|
Endless Mike posted:If you go over to svrider.com there's an entire touring forum full of pictures and discussion on the options. The consensus seems to be that the Givi setup is probably the best, but not really worth the price increase over the SW Motech setup (which can use the Givi luggage).
|
# ? Mar 22, 2009 05:38 |
|
MourningGlory posted:Thanks for the information. I'll poke around on svrider and see what comes up. I guess I'm spoiled by SA. Reading other forums is painful at times.
|
# ? Mar 22, 2009 14:18 |
|
Can anyone recommend a standard-mount slip-on that sounds good (deep, rumbly, not raspy) but is not significantly louder than the stock can? Or at least, not offensively loud?
|
# ? Apr 7, 2009 16:43 |
|
I dont know what you mean by 'standard mount'. I went with the Two Bros. It's real deep, not offensively loud (I dont think) and I think is one of the better sounds an SV is capable of making. You do have to do a little hack saw action though. Nothing hard.
|
# ? Apr 7, 2009 17:26 |
|
Spiffness posted:I dont know what you mean by 'standard mount'. quote:I went with the Two Bros. It's real deep, not offensively loud (I dont think) and I think is one of the better sounds an SV is capable of making.
|
# ? Apr 7, 2009 21:13 |
|
Hey everyone, I just got a 2003 SV off craigslist. Loving every minute of riding it. The bike has a Salvaged/Reconstructed title and I don't know anything about its maintenence history besides the fact that it drives fairly well right now. The oil light comes on when I first turn it on and it probably needs some maintainence (the front wheel makes a soft but weird sound every time the wheel revolves which you can only hear at low speeds). Due to a large bank account and limited time, I have little interest in doing any maintainence on it myself. I figure I have two options: 1) Go to a private mechanic (there are lots I see on craigslist) that has his own shop. I do like supporting the little guy. 2) Go to a Suzuki dealership. This would also provide comprehensive paperwork about the bike if I ever decided to sell it. This would probably be the more trustworthy route. What should I ask for? A full inspection and tune up? Thanks edit: I'm in Portland, OR if you guys have any specific recommendations for shops/mechanics Apathy=Awesome fucked around with this message at 22:50 on Apr 7, 2009 |
# ? Apr 7, 2009 22:33 |
|
Oil light buisness is normal. You don't have a lot of oil pressure when the bike isn't running The front end thing could be normal brake dragging, or it could be an issue with a bearing. I'd hesitate to recommend a private mechanic without prior knowledge of them and their work. There's some very trustworthy ones out there, and there's some complete scumbags. At least with a dealership you've got someone bigger than a guy in their garage to go after if there's a problem. I'd take it into a dealership, tell them what you just told us, and ask for a pre/post purchase inspection. Tell them that you want them to do anything that needs to be done. I'm going to guess that they'll check all of the consumables and the fluids as well as go over all of the basics on it, check out that noise from the front end, and just make sure you're ready to go. If you feel like you're getting shafted, just drop back by the thread with a list of what they're charging you for and we'll be happy to go over if it's reasonable or not. What sort of mileage does it have on it? It may need the valves checked, which could be a few hundred $. What sort of mechanical experience (if any) do you have? You should learn to take care of the basics that you'll need, like checking your chain and lubing it and your oil level.
|
# ? Apr 8, 2009 00:06 |
|
Mileage is 14,500, I think I can afford to have the valves checked since I was able to snag the bike for $2100 There are some advantages to a down economy. I figured out how to tighten the chain and have basic mechanic experience. Have no idea about the oil so I think I need to give the technical manual some serious reading. I'm just still in shock that I actually own one of these bikes after 7 years of really wanting one but never being able to afford one. I always used to think 1st gen looked the best but it's weird now I prefer the 2nd gen look. Maybe it's just my brain trying to eliminate cognitive dissonance. It's my only form of transportation now. I went from a lovely 1993 Ford Taurus which cost $1000 a year in insurance to the bike which is $142 a year in insurance.
|
# ? Apr 8, 2009 00:56 |
|
Apathy=Awesome posted:Mileage is 14,500, I think I can afford to have the valves checked since I was able to snag the bike for $2100 There are some advantages to a down economy. If you don't have proof that they've been done, it'd be a very good idea to have them checked. The oil is simple...there's a sight glass on the right side, by the clutch cover. Stand the bike upright on level ground, and it should go up to the middle of the sight glass. I went the opposite direction with gen 1 and gen 2 looks...loved the gen 2, hated the gen 1, now I've own 2 gen ones. The gen 2 does have much more kickass tail lights though.
|
# ? Apr 8, 2009 01:04 |
|
I live in Portland, OR as well and use EDR performance when I don't do my own maintenance. They are spendy but do poo poo RIGHT. http://www.edrperformance.com/
|
# ? Apr 8, 2009 14:56 |
|
MourningGlory posted:Can anyone recommend a standard-mount slip-on that sounds good (deep, rumbly, not raspy) but is not significantly louder than the stock can? Or at least, not offensively loud? Not sure how they sound for just a slip-on can, but I'd definitely avoid Hindle, if the full system is any indication. Goddamn, that thing is loooooouuuuuuuud.
|
# ? Apr 9, 2009 03:39 |
|
MourningGlory posted:Can anyone recommend a standard-mount slip-on that sounds good (deep, rumbly, not raspy) but is not significantly louder than the stock can? Or at least, not offensively loud? Avoid M4, Yoshi. I'd recommend micron if you can find one.
|
# ? Apr 9, 2009 05:42 |
|
Well, I've been thinking about it. I'm going to convert my sv650s into an sv650N Going to need some help with headlight decisions and the like. GET READY EVERYBODY
|
# ? Apr 9, 2009 05:54 |
|
Z3n posted:Avoid M4, Yoshi. I'd recommend micron if you can find one. Now see, others have specifically said that the Yoshi RS-3 is fairly quiet. Which model are you referring to? Every time I read that a given pipe is loud or quiet, someone else says the exact opposite somewhere else. I'm getting frustrated
|
# ? Apr 9, 2009 06:21 |
|
MourningGlory posted:Now see, others have specifically said that the Yoshi RS-3 is fairly quiet. Which model are you referring to? Pipes are in the ear of the beholder? I had an RS3 Race full titanium system with no baffle. It was loud as hell. Maybe other people had the "street" baffle in theirs? I'm pretty sure that hindle, muzzy, and yoshi all make baffles. I know for sure that blue flame does. If you want a snazzy can that can be quiet or loud, pick up a blue flame one. It's got 2 exhaust outlets, of which you can baffle both or one, so you can get a more raspy sound, a deeper sound, or have it be quiet. I'm gonna try and find one for my streetbike.
|
# ? Apr 9, 2009 06:28 |
|
Two Brothers is loud. It might not hit your ear loud on the seat but goddamn does that pipe penetrate urban apartments like no other. Spiffness posted:not offensively loud (I dont think) I feel like I need to have a helmet with an LED halo telling other drivers and pedestrians "I'M SORRY THIS ISN'T MY BIKE IT'S HIS >>>>>>>"
|
# ? Apr 9, 2009 09:28 |
|
I finally found a Gladius that Z3n might want to sell his kidneys for: Supermoto Gladius! http://www.motorcyclespecs.co.za/model/Custom%20Bikes/L-R-G%20Gladius.htm Really, aside from that heinous stock exhaust, I now think that it looks less retarded than in the press material.
|
# ? Apr 9, 2009 10:18 |
|
Simkin likes gay colors pass it on
|
# ? Apr 9, 2009 10:26 |
|
Ok, that's awesome. On slipons, I like my Leo Vince, it's not really that lound and it's quiet as a mouse compared to a Tuono with full Tigcrafts. But it sounds better than stock, is soooo much lighter than the stock can and runs warm to the touch instead of burn your hand hot. Thatt will be true of any slipon though.
|
# ? Apr 9, 2009 14:48 |
|
Simkin posted:I finally found a Gladius that Z3n might want to sell his kidneys for: I do like it a lot, but why have all of that front travel when the rear shock still only has a few inches? Seems kinda pointless, and like it'd toss the bike's travel all out of balance. And I loving called it last night that the first thing people would do would be to rip off those lower shrouds. Also, I'm not sure if I'd trust the single rotor to stop a 400+ pound bike over and over again in an aggressive riding situation, but that's probably not a concern for the urban SM rider. I do think that's way cool though. I wonder how much weight you could strip off of it to get a good hybrid SM/Standard.
|
# ? Apr 9, 2009 15:56 |
|
Simkin posted:P.S. The color scheme is gross.
|
# ? Apr 9, 2009 20:09 |
|
GriszledMelkaba posted:Simkin likes gay colors pass it on And? I'd probably want to tart the bike up with some nice magenta graphics, just to get the full 80s effect. They could definitely do with twin front rotors, longer real travel, and a different mounting position for the exhaust (high mounted or undertail?). Still, I would ride the poo poo out of it, colour scheme and all.
|
# ? Apr 9, 2009 20:43 |
|
|
# ? May 9, 2024 22:46 |
|
jdonz posted:clear plastic rims I wonder how many miles you could go before they get all dirty and look like crap.
|
# ? Apr 9, 2009 20:54 |