|
crm posted:Any suggestions on what string I should use on my Ibanez Artcore AS73? Jazz players who use that guitar would put a medium to heavy set of flatwound strings on it.
|
# ? Jan 31, 2011 18:41 |
|
|
# ? Jun 6, 2024 06:28 |
|
Nigel Tufnel posted:I'm about to put my Jackson SLSMG in Standard D. What are the best string guages to use? I normally play a standard set of 9s and the general consensus for D standard online seems to be 11-52s. Sound about right? I've not intonated it properly yet (can't see it making a huge difference though), but I put 11s on my Pacifica when I tuned it to D standard and they feel a bit floppy to me - pretty sure they were 11-49 though. The lower strings are the worst, a tiny squeeze on the bottom string and you get a serious pitch bend, but the heavier strings in the 11-52 set might fix that.
|
# ? Jan 31, 2011 20:42 |
|
The 6th string on my guitar buzzes really badly (unplayable) at the neck of my guitar. It's fine to play with a capo (or fretting somewhere on the string). This seems like a pretty minor repair to me, but can anyone suggest how I might do it myself instead of bringing it somewhere to have it looked at?
|
# ? Feb 2, 2011 01:37 |
|
Newf posted:The 6th string on my guitar buzzes really badly (unplayable) at the neck of my guitar. It's fine to play with a capo (or fretting somewhere on the string). This seems like a pretty minor repair to me, but can anyone suggest how I might do it myself instead of bringing it somewhere to have it looked at? Sounds like the nut slot is cut too deep for that string. You could pop off the nut, stick a shim underneath it (paper works fine) and glue it back on.
|
# ? Feb 2, 2011 03:16 |
|
What the hell is wrong with my output? Oh. Do I just solder this back together and put the screws back in, or what?
|
# ? Feb 2, 2011 06:12 |
|
uncle jimbo posted:What the hell is wrong with my output? pretty much
|
# ? Feb 2, 2011 06:42 |
|
Hate those nights when I can't get poo poo to come out of it and end up just doing chord changes over and over. I love those nights when I can just sit on the floor and get into a groove for two hours just noodling up and down scales with bends, vibratos and slides and it actually sounds good to me for a change. That was tonight, my fingers are on fire and I basically got stoned without smoking anything.
|
# ? Feb 3, 2011 03:13 |
|
Are there any other guitar forums out there worth frequenting besides sevenstring, metalguitarist, and talkbass? Preferably something not metal. I haven't found anything that comes even close in terms of activity and expertise.
|
# ? Feb 4, 2011 21:04 |
|
Harmony Central, The Gear Page, and Ultimate Guitar is all I got. Every brand also seems to have quite a few dedicated sites as well. Most of it is "NEW GUITAR DAY", but they seem to be clamping down on that a bit lately.
|
# ? Feb 5, 2011 08:13 |
|
The only other guitar forum I've really visited is Offset Guitars, but I don't know if I would recommend it. The build threads are usually interesting, but I really don't like the userbase on that site. Maybe its just my own personal hangup, but when I see forum users calling each other by their real life first names I tend to think its creepy and weird.
|
# ? Feb 5, 2011 08:28 |
|
I really like TDPRI. The user base tends to be mature and professional, and yet not snobbish. Liking Telecasters is sort of a prerequisite, though.
SaintFu fucked around with this message at 10:30 on Feb 5, 2011 |
# ? Feb 5, 2011 10:25 |
|
CalvinDooglas posted:pretty much Yay, it worked. New question - I come from a classical background, so the neck on this Jackson I inherited feels really small. For the next time I get a new guitar, are there any brands or models out there known for having a particularly wide nut width?
|
# ? Feb 5, 2011 19:46 |
|
What can I do about buzz on a low E? I can't raise my bridge any higher. I've taken it to three different places who all basically put a new set of strings on it and said "oh well it's not that big of a problem" and charged me 30 bucks. Asked them to do any truss rod adjustments, check the neck, etc. All claim no problems. The problem is slightly less of an issue when I use thicker gauged strings but I'd like to stay around a .11 at the largest. It's not a very very nasty buzz, more like a "ping" or something. Problem is that occasionally it comes through the amp when playing clean or running directly to the board and that's an annoyance. quote:New question - I come from a classical background, so the neck on this Jackson I inherited feels really small. For the next time I get a new guitar, are there any brands or models out there known for having a particularly wide nut width? My favorite neck profile is thin at the nut but thick otherwise. I call it Petite since I don't know much about what to call what type of neck. May want to check into something with a Fender spec on it. You can change out the neck for a fatter 50's style Tele neck. A buddy of mine did this and it's a pretty huge neck, fat and wide. I pretty much am never 100% comfortable with Gibson's/Ibanez/Hagstrom because they have wide and thin necks, so you can check them out too. Zuhzuhzombie!! fucked around with this message at 18:44 on Feb 6, 2011 |
# ? Feb 6, 2011 18:40 |
|
I've been digging into blues a lot lately, and I'm finding playing with my thumb over a pick is giving me drastically better tone. I am coaxing out sounds I don't think I could ever do with a pick. Is this going to get me stuck later on when I move into metal and such? I am basically a total beginner still as far as I am concerned.
|
# ? Feb 6, 2011 23:11 |
|
Can anyone tell me how to play these chords properly in Harry Chaplin's "Cats in the Cradle"? http://tabs.ultimate-guitar.com/h/harry_chapin/cats_in_the_cradle_ver3_crd.htm D/C#, D/B, D/A, D/G, D/F# I just cant seem to make it sound right
|
# ? Feb 6, 2011 23:18 |
|
Philthy posted:I've been digging into blues a lot lately, and I'm finding playing with my thumb over a pick is giving me drastically better tone. I am coaxing out sounds I don't think I could ever do with a pick. Is this going to get me stuck later on when I move into metal and such? I am basically a total beginner still as far as I am concerned. Fingerstyle's going to give you a different sound for sure, and there's definitely nothing wrong with playing that way - a few rock guitarists do it too (Mark Knopfler from Dire Straits is the first one that comes to mind). For something like the blues expressive is very good. That said if you're relying on that exclusively you will have trouble with metal, where speed and precision are usually really important. A pick gives you a very clean, focused sound with a strong attack, and you can play very quickly too. Fast rhythm playing with chugging power chords probably won't come out too well without a pick either. I mean I'm sure there are a couple of metal players out there who play fingerstyle (there's always someone) but if that's your goal you should keep your hand in with both techniques. But use what works! Thoren posted:Can anyone tell me how to play these chords properly in Harry Chaplin's "Cats in the Cradle"? Those are slash chords, all they are are D chords with a different note in the bass. So say you're playing open D, xx0232, the lowest note there is a D. For D/C# you just need to change that low D to a C#, like x4x232 (if you left that open string there it would clash something horrible). D/B would be x2x232 and so on - if you notice that bass note is walking down to the E chord at the end. If you're having trouble actually playing the chords let me know, sometimes with this kind of thing you can keep the chord fretted somehow and just move spare fingers around, other times you have to change your fingering as you go. baka kaba fucked around with this message at 08:08 on Feb 7, 2011 |
# ? Feb 7, 2011 08:01 |
|
I almost finished the telecaster build I posted about a few pages back. I'm just waiting for the tuners to arrive so I can set it up and play it. Here are a few pictures of it:
|
# ? Feb 7, 2011 22:12 |
|
I'm about to throw this stupid floyd rose tremolo in the trash. I spent a few hours the other night dialing in the correct spring tension and intonation, then i snapped a string. I replaced them all one by one, tuned it 8,000 times, and stretched out the strings so they stay there. The problem is that whenever the tremolo gets bumped, it doesn't come all the way back to where it was. So if everything is exactly in tune and my wrist hits the tremolo bending everything up, it will settle back down to ~20 cents sharp. If I pull up on the bridge and bring all the strings down, it will settle about 20 cents flat. Is there a part I can lube or replace to fix this, or should I sell it and move on?
|
# ? Feb 8, 2011 00:04 |
|
superdylan posted:I'm about to throw this stupid floyd rose tremolo in the trash. I spent a few hours the other night dialing in the correct spring tension and intonation, then i snapped a string. I replaced them all one by one, tuned it 8,000 times, and stretched out the strings so they stay there. The problem is that whenever the tremolo gets bumped, it doesn't come all the way back to where it was. So if everything is exactly in tune and my wrist hits the tremolo bending everything up, it will settle back down to ~20 cents sharp. If I pull up on the bridge and bring all the strings down, it will settle about 20 cents flat. Is there a part I can lube or replace to fix this, or should I sell it and move on? I think the bodies are routed just for those super trems. Take it to the shop if you're not sure, and ask what your bridge replacement options are. You'll get fine tremolo action and consistent tuning with a regular tremolo bridge and locking tuners.
|
# ? Feb 8, 2011 01:22 |
|
You can look into getting a tremsetter http://store.hipshotproducts.com/cart.php?m=product_detail&p=115 There is another product that does something similar but I can't remember it right now.
|
# ? Feb 8, 2011 02:09 |
|
Koth posted:I almost finished the telecaster build I posted about a few pages back. I'm just waiting for the tuners to arrive so I can set it up and play it. Here are a few pictures of it: Gorgeous. When I first saw the die on the lever switch, I thought it was really tacky. Then I realized it was perfect.
|
# ? Feb 8, 2011 02:14 |
|
Thumposaurus posted:You can look into getting a tremsetter This is really weird, and it seems over complicated. Instead of removing the plate that the two claw screws go into entirely, why not just fab the same plate with a hole in the middle, then mount the tremsetter onto that plate with a bolt-on system? Might need custom replacement claw screws that hold the plate from both sides.. But theres gotta be an easier way. Philthy fucked around with this message at 05:12 on Feb 8, 2011 |
# ? Feb 8, 2011 05:09 |
|
Manky posted:Gorgeous. When I first saw the die on the lever switch, I thought it was really tacky. Then I realized it was perfect. Heh, yeah I thought the same thing when I put it on.
|
# ? Feb 8, 2011 05:27 |
|
Koth posted:I almost finished the telecaster build I posted about a few pages back. I'm just waiting for the tuners to arrive so I can set it up and play it. Here are a few pictures of it: I used to want a telecaster but I don't think I can have one now, I know I will never own something as beautiful as this.
|
# ? Feb 8, 2011 06:32 |
|
superdylan posted:I'm about to throw this stupid floyd rose tremolo in the trash. I spent a few hours the other night dialing in the correct spring tension and intonation, then i snapped a string. I replaced them all one by one, tuned it 8,000 times, and stretched out the strings so they stay there. The problem is that whenever the tremolo gets bumped, it doesn't come all the way back to where it was. So if everything is exactly in tune and my wrist hits the tremolo bending everything up, it will settle back down to ~20 cents sharp. If I pull up on the bridge and bring all the strings down, it will settle about 20 cents flat. Is there a part I can lube or replace to fix this, or should I sell it and move on? I've heard good things about the Tremel-No. Not sure if it's exactly what you're looking for, but it might be an easier solution than replacing the bridge.
|
# ? Feb 8, 2011 14:44 |
|
Koth posted:I almost finished the telecaster build I posted about a few pages back. I'm just waiting for the tuners to arrive so I can set it up and play it. Here are a few pictures of it: As someone who loathes teles, that's loving awesome.
|
# ? Feb 8, 2011 15:41 |
|
crm posted:Any suggestions on what string I should use on my Ibanez Artcore AS73? Regular set of 10s with a wound G.
|
# ? Feb 8, 2011 16:32 |
|
I know gently caress all about electronics or amps - most of my experience is with a classical guitar. What can I do about a 'noisy' rig? The tubes are like 3 months old, so I don't think that's it.
|
# ? Feb 9, 2011 18:55 |
|
Are you using a guitar with single coil pickups and playing with lots of gain? That will cause noise. Humbuckers would be quieter, and/or you could buy a noise gate. Sometimes you'll get a little bit of hum or hiss no matter what you do though. Could be cheap cables, poorly grounded electrical sockets, other electronics in the room, etc.
|
# ? Feb 9, 2011 20:18 |
|
I bought a Yamaha Pacifica on ebay. The guitar only works puts out sound when the volume knob is turned all the way up to 10 (the seller neglected to mention this issue, btw). Is this an easy fix?
|
# ? Feb 9, 2011 21:18 |
|
uncle jimbo posted:I know gently caress all about electronics or amps - most of my experience is with a classical guitar. What can I do about a 'noisy' rig? The tubes are like 3 months old, so I don't think that's it. Is there a computer or something nearby? Are you using a compressor or distortion pedals of any sort? What amp are you using? What guitar are you using?
|
# ? Feb 10, 2011 03:17 |
|
rt4 posted:Is there a computer or something nearby? Are you using a compressor or distortion pedals of any sort? What amp are you using? What guitar are you using? Just a tv and xbox maybe 15 feet away; stock Jackson DK2 through a Peavey Vypyr 60. nuncle jimbo fucked around with this message at 05:11 on Feb 10, 2011 |
# ? Feb 10, 2011 05:07 |
|
hypersober posted:I bought a Yamaha Pacifica on ebay. The guitar only works puts out sound when the volume knob is turned all the way up to 10 (the seller neglected to mention this issue, btw). Is this an easy fix? Been a while since I did any electronics but it's probably just that the potentiometer needs replacing - should be easy if you have basic soldering skills. http://www.fretnotguitarrepair.com/repair/electric-guitar/electronics.php Cleaning it might help too, although in my experience dirty pots tend to at least crackle and produce some signal as you turn them. This might not be the issue but it shouldn't be a problem if it is uncle jimbo posted:Just a tv and xbox maybe 15 feet away; stock Jackson DK2 through a Peavey Vypyr 60. Is your phone in your pocket near the guitar? And are we talking hiss or hum or what
|
# ? Feb 10, 2011 14:29 |
|
I have a loose volume pot. What's the safest way to pry off the knob without damaging my knob or body?
|
# ? Feb 10, 2011 15:07 |
|
Have a look at that link I just posted, it shows how you can pop them off with a rag or a couple of picks
|
# ? Feb 10, 2011 20:52 |
|
rt4 posted:I have a loose volume pot. What's the safest way to pry off the knob without damaging my knob or body? Like this: Please ignore the lovely carpet scrap I used to do my redneck lutherie on.
|
# ? Feb 12, 2011 21:12 |
|
Ha! Thanks for the effortpics
|
# ? Feb 12, 2011 21:55 |
|
My humbucking pickup is hosed up. It still works, but I don't get enough volume from it. I took it apart a while ago to check something and I couldn't get it to sit right after that. It has been bothering me ever since. I don't want to take it apart for fear of me loving it up more. Question: Are you suppose to be able to push down on your pickups and have them move? Mine one is kind of wobbly, and doesn't sit up as high/close to the strings. I want to fix this but I am kind of scared to do it, and I'm not sure how I could raise it up. Sorry for the bad quality, its phone camera =/ On the pickup closest to the neck it sort of dips in on one side, and I think it has been affecting my sound. The second picture shows both pickups, and the back pickup near the bridge is seated correctly, its even and flush with the pickup pot. Any advice?
|
# ? Feb 12, 2011 22:53 |
|
pixfix posted:My humbucking pickup is hosed up. Remove strings, remove the 4 screws at the corners of the pickup ring but not the two on the sides yet, and pull the whole pickup assembly out (leaving the wiring intact... should be enough slack to pull the assembly out). The two screws left in the assembly should enter through the ring, run through a spring and be screwed into the pickup's "ears". For your guitar, something will be wrong with that last sentence. Missing screws? Replace them. Missing springs? Replace them. Screw not in pickup ear? Screw it into ear while the assembly is out of the guitar to make it catches (don't worry about pup height for now, just screw in a couple revolutions). Put the assembly back, screw in the 4 corner screws and check pup clearance against where you think the springs would be (i.e.: pup should be well below the fret board). Restring. Play and adjust pickup upwards (tighten two side screws) until you get it where it needs to be. If the assembly is correct and you still have issues, take a better pic while the assembly is out...
|
# ? Feb 12, 2011 23:30 |
|
|
# ? Jun 6, 2024 06:28 |
|
What are the best current options for 8-string guitars under $800 right now?
|
# ? Feb 12, 2011 23:37 |