|
trampletheweak posted:I have a Dual CS 606 table....and nothing else. What else do I need to get this working? Amp, speakers etc. The table itself is in good condition, I just don't know what else I need. Any help would be greatly appreciated. The first thing would be to check if there is a cartridge and stylus, and if the stylus is damaged at all. Assuming that's all good, you need a phono preamp in order to hook it up to any modern receiver (auxiliary in) or computer (line in, you'll need a stereo RCA to 3.5mm Y adpater for this). You'll obviously need speakers to listen, but if you have a stereo or home theater system already, I'm sure you have speakers. If you want to go the vintage route, you don't need a phono preamp as all the vintage receivers/amps have a phono stage built in. Just check if the back has RCA inputs labeled "phono". Some new new receivers have phono stages built in now that vinyl is making a bit of a comeback, but they're still pretty uncommon.
|
# ? Jun 22, 2011 18:06 |
|
|
# ? May 15, 2024 05:23 |
|
Hippie Hedgehog posted:I've suddenly realized that all of my old vinyl must be worn to hell. HH, do you clean your records in any way? I've heard some great results revitalizing those old discs with a good wet clean and vacuum dry.
|
# ? Jun 22, 2011 18:50 |
|
Doc Spratley posted:HH, do you clean your records in any way? I've heard some great results revitalizing those old discs with a good wet clean and vacuum dry. I don't really have the facilities to do that. What would I need? Edit: I've got this carbon fiber brush... Hippie Hedgehog fucked around with this message at 23:31 on Jun 22, 2011 |
# ? Jun 22, 2011 23:29 |
|
Hippie Hedgehog posted:I don't really have the facilities to do that. What would I need? That brush plus some soap and water is really all you need. Wet the record, being careful not to get any water on the label. Get a little soapy water, dish soap works fine, and dip your record brush in it. Go over each side in a circular motion a few times. Rinse the record, let it dry, and that's all there is to it! There are definitely fancier solutions, and I have no doubt that they produce superior results, but I've had good luck cleaning records this way. Note that you might also have physical wear on the records. Vinyl is somewhat soft, and if it was played with a very cheap or mis-aligned needle the record surface will have been worn down. Unfortunately there's nothing you can do to fix that.
|
# ? Jun 25, 2011 01:26 |
|
Peacebone posted:I have an pioneer sx-770 blackface model and i currently have some cheap sony bookshelf speakers plugged into the A channel. My parents just moved and they found a no name subwoofer probably from some 5.1 surround sound dvd box set thing. I was wondering if I could plug the speaker wire into the B channel or would that be a bad idea. Hard to say without more information. Some subwoofers are set up to take speaker-level inputs and some aren't. If the sub has inputs for bare wire, especially if they are labeled with the word "speaker" in some fashion, it's probably okay, but no guarantees. Is there any information on the sub at all? Can you take a picture of the inputs?
|
# ? Jun 25, 2011 01:31 |
|
strtj posted:That brush plus some soap and water is really all you need. Wet the record, being careful not to get any water on the label. Get a little soapy water, dish soap works fine, and dip your record brush in it. Go over each side in a circular motion a few times. Rinse the record, let it dry, and that's all there is to it! There are definitely fancier solutions, and I have no doubt that they produce superior results, but I've had good luck cleaning records this way. Thanks for the tips! I'll try it on one of the records with less nostalgic value. Most of the records I'm having problems with are my dad's, and he used to lug them around and DJ back in like 1970 or so, so that's why I'm assuming it's wear rather than dirt that gives them a quite pronounced distorsion.
|
# ? Jul 7, 2011 12:24 |
|
I am getting ready to purchase a debut III and a Marantz PM5004 receiver. I figured that I may as well get new speakers too, any suggestions? My budget is a little under $1,000, and this will be mainly to listen to records, but down the line I may also hook it up to a TV/DVD player, but priority one is vinyl. Thanks for the help.
|
# ? Jul 21, 2011 16:45 |
|
Fritzler posted:I am getting ready to purchase a debut III and a Marantz PM5004 receiver. I figured that I may as well get new speakers too, any suggestions? My budget is a little under $1,000, and this will be mainly to listen to records, but down the line I may also hook it up to a TV/DVD player, but priority one is vinyl. Do you listen to music at low, medium or high volume? I'm going to go ahead and plug the handmade speakers a friend of mine makes. The Blumenstein Orcas sound incredible and have a very flat response. The only thing is you'd want to pair them with a sub. He has a 30-day return policy. So full disclosure: I saw an ad for handmade speakers here in Seattle and visited his workshop a number of times because his speakers are awesome and Clark rules. Seriously an awesome guy.
|
# ? Jul 21, 2011 17:40 |
|
Hello turntable thread.. I've been really lax about my record collecting and listening in the last 10 years, so I'm looking to get rid of two of my three turntables. Maybe you guys would know how much I should be asking for them. I've got two SL1200 M3D's, which as I can recall weren't that well received. The have no dust covers and I let them get criminally dusty, but otherwise they haven't been used a lot. The needles are garbage I'm sure and I don't have the original packaging. Can you help me set a price so I can throw em up on Craigslist? Thanks phone pic:
|
# ? Jul 21, 2011 19:24 |
|
Snowy posted:Hello turntable thread.. I've been really lax about my record collecting and listening in the last 10 years, so I'm looking to get rid of two of my three turntables. Maybe you guys would know how much I should be asking for them. Depending on where you live, I think you could ask ~350 for each and get 275-300. I just bought a couple mkIIs for 250 apiece but they were in good but not great condition. Black, though, and with dustcovers.
|
# ? Jul 21, 2011 19:37 |
|
Ghumbs posted:Do you listen to music at low, medium or high volume?
|
# ? Jul 21, 2011 19:44 |
|
Ghumbs posted:Depending on where you live, I think you could ask ~350 for each and get 275-300. I just bought a couple mkIIs for 250 apiece but they were in good but not great condition. Black, though, and with dustcovers. Great, that's about what I was expecting. I'm in NYC so I'll try to get at least 300, hopefully there's enough people with cash looking to buy. Thanks!
|
# ? Jul 21, 2011 19:56 |
|
I'm happy I found this thread, vintage audio gear has been a mini-obsession of mine for the past several months. I'm running with a Pioneer SX-939 receiver and a Technics 1200 turntable. A few weeks ago I dug up a pair of EPI M-150 speakers that had been sitting in my parents' garage for the last 20 years. The foam was rotting out around the woofers, so I took them to a local guy to get them re-foamed. Just got them back to day and they sound loving AMAZING. These things retailed for $300 for each speaker in 1973; that's about $1500 today with inflation, and I got this work done for $40. My next project will be building new grill covers for these guys. Dealing with this vintage stuff really gives you an appreciation for how well electronics were made in the 70s. Can you imagine the receivers built today lasting 40 years? I'm nostalgic for an era I wasn't around to experience.
|
# ? Jul 22, 2011 06:16 |
|
What would be considered a good price to sell a slightly broken AT LP-60 for parts for? The only thing wrong with it is that the skate and tracking pressure are set wrong, and it's a cheapo turntable so I can't directly adjust them.
|
# ? Jul 31, 2011 05:01 |
|
I bought a cheap Pioneer PL-120 record player a while back to fix up and sell for a small profit but now that I've adjusted the PU plate and speed, bought and installed some new leads, a new belt, and a new Audio Technica AT95E pick-up, I don't feel like getting rid of it since it's an auto-return system and I'm a lazy git. Also, it sounds pretty great. At 20,90 € I think I'm going to order a bunch of those AT95Es. Now I have a cheap-rear end belt-drive 80's (or is it 70's?) record player with a cheap-rear end cartridge sitting atop my SL-1200 Mk II with a Shure M97Xe. Well, at least I'm getting some use out of the Technics' superior suspension. (Also, I'm beginning to think the M97Xe really isn't a very good match for the Technics tonearm anyway.)
|
# ? Aug 2, 2011 15:57 |
|
I have a PL-120 as well(given to me for free along with 200+ vinyl), haven't had a chance to use it yet but if needed is there sites out there showing what kind of cartridge I can put on this? I am totally new to modifying these things, so if it requires crazy work I'm f'd.
|
# ? Aug 3, 2011 01:10 |
|
Vintersorg posted:I have a PL-120 as well(given to me for free along with 200+ vinyl), haven't had a chance to use it yet but if needed is there sites out there showing what kind of cartridge I can put on this? I am totally new to modifying these things, so if it requires crazy work I'm f'd. BTW, that 0 is actually a D. http://www.vinylengine.com/library/pioneer/pl-12d.shtml has the manuals if you need them. Any "standard mount" cartridge will do. The aforementioned Audio Technica AT95E or Shure M97Xe are about $50 each and good value for money.
|
# ? Aug 3, 2011 03:45 |
|
Yeah, when I was looking for info on the PL-120, most of the stuff I found was actually about the PL-12D, which pissed me off to no end. Apparently though the PL-120 is just another model (PL-2?) whose name was changed for whatever reason for the European market. I wouldn't mind owning a PL-12D.
|
# ? Aug 3, 2011 06:40 |
|
PL-400, gently caress, im mental. I was at work and that number looked vaguely familiar, hehe.
|
# ? Aug 3, 2011 15:54 |
|
Picked up some Pioneer HPM-500s. I am really enjoying them.
|
# ? Aug 5, 2011 19:04 |
|
What are you guys using to store your records? I'm looking for something like this, but it seems pretty expensive for such a simple box.
|
# ? Aug 8, 2011 20:26 |
|
durk onion posted:What are you guys using to store your records? I'm looking for something like this, but it seems pretty expensive for such a simple box. http://www.ikea.com/us/en/search/?query=expedit Any of those^^ Personally I use the one that's 2 squares by 4 squares.
|
# ? Aug 8, 2011 20:33 |
|
all you really need
|
# ? Aug 8, 2011 20:37 |
|
Check out Sleeve City. They have double thickness cardboard LP storage boxes and wooden LP crates. They work pretty well.
|
# ? Aug 8, 2011 22:04 |
|
I have the 2 box by 4 box Ikea Expedit and 4 peaches style wooden record crates. Only one is actually a Peaches Record crate. The others are just made the same way. The peaches paper on the side of the Peaches crate is in terrible condition, though. Thinking about printing the picture out and gluing them to all of the crates.
|
# ? Aug 8, 2011 23:41 |
|
Seconding Expedits. They actually changed the moulds for milk crates here so records would no longer fit in them.
|
# ? Aug 9, 2011 12:33 |
|
The picture I posted are oversized crates from the container store. They even hold my oversized box sets.
|
# ? Aug 9, 2011 17:02 |
|
The Bandit posted:The picture I posted are oversized crates from the container store. They even hold my oversized box sets. Eh some people don't want to look like a college dorm forever. I wish we had an Ikea store near us.
|
# ? Aug 9, 2011 22:36 |
|
I have one of these: http://www.target.com/Avington-Bookshelf-Dark-Tobacco/dp/B000X1U27M Records fit on all 4 shelves. You lose a bit of space on the sides due to how the front posts fit though. I put my CD binders in that space since I don't really need to get to the actual discs anyway.
|
# ? Aug 10, 2011 00:40 |
|
Thanks guys. I happened to find this one Amazon and it should work for me. I like the Expedit stuff but I really only need 1 "square" worth. http://www.amazon.com/gp/product/B000O1FROO/ref=ox_ya_os_product
|
# ? Aug 10, 2011 03:33 |
|
I bought these at Home Depot for $65, you can buy the individual cubes as well and connect them. Very strong and sturdy.
|
# ? Aug 10, 2011 19:01 |
|
http://www.project-audio.com/main.php?prod=debut Opinions on these?
|
# ? Aug 10, 2011 21:17 |
|
They are considered a good choice for a starter turntable. In the same price range, you could also go with the Rega RP1. Most people hate the cartridge it comes with (emphasizes treble too much I guess) and usually buy a replacement immediately
|
# ? Aug 10, 2011 23:09 |
|
Rega players used to have a really good reputation. Now they have a reputation of running up to 1% too fast. I have no idea whether this is true or not or just the usual audiophile backlash against any kit that becomes really popular. Maybe it's the same thing as the HUNTING AND PECKING on an SL-1200 or the belief that the MX97e used to be pretty good but not anymore (because it's made in Mexico ).
|
# ? Aug 11, 2011 07:01 |
|
Inherited a JVC QL-A2 and have since put on a Shure m97xe. I'm really enjoying it, with some slight speed issues. It had some pretty severe issues at first, so I opened her up and found the potentiometers that affect the speed which are just two little black "screws" on the main circuit board. I sprayed em with DeOxit, moved em around alot, and everything seemed to be fine and dandy. Now that Ive been listening more, I'm noticing some slight intermittent pitch shifts. They generally last less than a second. I don't notice it with vocals, mainly string instruments. Do you think this is the dirty pots, or dirty, warped records ? Intuition tells me that a warped record could cause some slight, intermittent shifts. I'm not certain yet, but it seems to get better after the table has been spinning a little while, which would lead me to think its the pots, but I don't see any corrosion. Any words of wisdom ? Also, this may seem like a silly question... I only have old records. Either my dads, or from a used record store. Pretty much nothing past 1985, so chances are they are all recorded analog. Does a modern pressing, recorded and mixed through a DAW, share all the same wonderful characteristics that older, all analog recordings have ? edit: I played with the pots some more. Turned them lower, problem got worse, turned it slightly up, and it helped. I wish I could just open them up and clean them for real but I'm scared they will break. The problem is alleviated for now, I guess. Still cant get the quartz lock indicator to go green, though. proton fucked around with this message at 00:11 on Aug 12, 2011 |
# ? Aug 11, 2011 23:25 |
|
I ended up replacing all the electrolytic capacitors on a JVC's DC motor control board. It helped quite a bit with speed stability issues. That and cleaning the bits of old belt off the platter and motor spindle. A bit of grease or oil on the platter bearing/shaft helps too. Edit: I only did it because I had the caps leftover from various electronic projects. I didn't have a 470uF cap so I used two 220uF caps together for the main filter. The tiny cap on the motor itself was fun to replace. Edit 2: If I remember right, those were the only caps in the model I worked on. If you have the parts, replace all the caps you can on that one if it's a more complicated model. After 20 or 30 years, they do dry up. Paperweight fucked around with this message at 18:39 on Aug 14, 2011 |
# ? Aug 12, 2011 00:25 |
|
Paperweight posted:I ended up replacing all the electrolytic capacitors on a JVC's DC motor control board. It helped quite a bit with speed stability issues. That and cleaning the bits of old belt off the platter and motor spindle. A bit of grease or oil on the platter bearing/shaft helps too. I was curious about that. I think I'll go ahead and replace the caps. Thanks.
|
# ? Aug 12, 2011 01:40 |
|
Vintersorg posted:I bought these at Home Depot for $65, you can buy the individual cubes as well and connect them. How big is that compared to the Expedit's? I'm looking for some record storage for my dorm room that will be big enough to hold my TT/receiver on top.
|
# ? Aug 15, 2011 05:32 |
|
Vintersorg posted:I bought these at Home Depot for $65, you can buy the individual cubes as well and connect them. Any idea what they're called? I'm looking for them on Home Depot's website.
|
# ? Aug 15, 2011 18:45 |
|
|
# ? May 15, 2024 05:23 |
|
Let me see if I can find out, at work right now. EDIT: All they have is the Martha Stewart stuff online. I cannot locate what I bought. Might be store only. Thom and the Heads posted:How big is that compared to the Expedit's? I'm looking for some record storage for my dorm room that will be big enough to hold my TT/receiver on top. I'll measure it today. Vintersorg fucked around with this message at 20:05 on Aug 16, 2011 |
# ? Aug 16, 2011 19:54 |