|
Nerobro posted:I know the guy (well one of the guys) who restored that. I remember listening to him talk about parts, and figuring out what was wrong with it. I helped out a little bit on this locomotive early this year, mostly freeing up the fuel injectors. Took a lot of Kroil and hammering on them (with a piece of wood in between). The cylinders were apparently seized as well when the museum got it (leave an unused locomotive outside for six months or so, without an upside down bucket over the smokestack, and water will get in and make poo poo rust) but they were able to free it up in January using a 50/50 mixture of acetone and automatic transmission fluid.
|
# ? Jul 12, 2011 04:27 |
|
|
# ? May 15, 2024 02:57 |
|
Any of you guys live in or around Sacramento, CA? Get there and tour this place: http://www.csrmf.org/ My wife and her friend wanted to go when we cvisited Cali this winter. Totally worth it. See the movie upstairs too.
|
# ? Jul 12, 2011 04:39 |
|
bytebark posted:I helped out a little bit on this locomotive early this year, mostly freeing up the fuel injectors. Took a lot of Kroil and hammering on them (with a piece of wood in between). the next question is, do I know you? I know you know Jamie. I have realy meant to come out there on a work day.
|
# ? Jul 12, 2011 04:58 |
|
B4Ctom1 posted:Any of you guys live in or around Sacramento, CA? Really fun place to go. I went with my my ex-girlfriend, and we apparently didn't realize that you were supposed to tour the exhibits in a certain direction. We realized something was wrong after trying to walk against the flow in the narrow rail car aisles.
|
# ? Jul 12, 2011 09:58 |
|
So do railroads share engines as well as rolling stock? Here in Ohio I've been seeing BNSF units pulling trains on CSX/NS lines, and according to the system map on BNSF's website they don't go any further east than Chicago.
|
# ? Jul 13, 2011 01:05 |
|
Nerobro posted:the next question is, do I know you? I know you know Jamie. I know Jamie from the museum - usually I'm working on the electric rolling stock but diesels are A-OK too and I spent some time earlier this year in the diesel shop. Speaking of diesels, IRM is having its usual Diesel Weekend this Saturday & Sunday. Anyone around northern IL/southern WI interested in this type of thing should come out; there will be at least 15 different diesels operating in a "parade" past the museum's main depot (with lots of intentional smoke, depending on the engineer and if it's an ALCO or not).
|
# ? Jul 13, 2011 05:51 |
|
I think I"ll have time sunday to do that. Any excuse to ride the motorcycle yaknow? And show up on something with an engine that could fit in the cylinder...
|
# ? Jul 13, 2011 06:12 |
|
Geoj posted:So do railroads share engines as well as rolling stock? Here in Ohio I've been seeing BNSF units pulling trains on CSX/NS lines, and according to the system map on BNSF's website they don't go any further east than Chicago. Not totally sure, but I think there are leasing agreements among the railroads. Here are some BNSF units on a CSX train in New York: http://photos.nerail.org/s/?p=190480 Here in the Northeast, the Providence and Worcester Railroad purchased some former BNSF locomotives. Check out the paint scheme they came up with: http://photos.nerail.org/s/?p=190593 The normal company paint scheme is on the other unit.
|
# ? Jul 13, 2011 08:22 |
|
porkfriedrice posted:Here in the Northeast, the Providence and Worcester Railroad purchased some former BNSF locomotives. Check out the paint scheme they came up with: http://photos.nerail.org/s/?p=190593 The normal company paint scheme is on the other unit.
|
# ? Jul 13, 2011 08:45 |
|
Ah, I was wondering if there was a thread for train people on SA. I found it. I've never been all that interested in trains. They look cool, sometimes, but the size or power never really struck until I started my new job as a tradesman's assistant at a rail-yard in Melbourne, about 3 months ago. Now they are very, very cool and I'm learning a LOT about them. So what do I do? I work an 'underfloor wheel lathe'. Its very cool. It basically takes out any flat spots or skids in the wheels, by taking out between 10 and 30mm. Some locomotives we have to take off more, but that's dependent on how many kilometers they've done. Anyway, have a few pic's from work. And if you have any questions, I'll do my best to answer, or find out the answer's, if anybody is interested. I'll also take a few photos of any cool trains that come in. (Sorry for the crappy iPhone 3GS pics... If I can I'll get a few more pics with a normal camera, but for now, these will do.) The wheel lathe itself, facing the direction the trains roll out. A passenger train on the lathe being turned. A faulty train that was sitting there for ages (before I started). Some fool put in a window that was 10cm to small on the top, it only got fixed about a week ago... now another one is in its place. The day I took the first and last photo's was obviously foggy. That was because I was feeling arty. Now while I feel they are impractical to get a decent idea of the place, that's all I have for now. I'll try and get some clear ones over the next few days, either with the phone or the actual camera.
|
# ? Jul 13, 2011 13:10 |
|
Geoj posted:So do railroads share engines as well as rolling stock? Here in Ohio I've been seeing BNSF units pulling trains on CSX/NS lines, and according to the system map on BNSF's website they don't go any further east than Chicago. Yes, we can and do! The rail road calls it "horse power hours" Basically when one railroad has a shortage of power and another says hey we have some extra engines you can use, but you owe us some power in the future. There is also lease units, which works like a rental car agreement. And usually, if you see a solid block of units it means that its a "run through" train. Basically the railroads agree that its easier to leave the units on a train instead of swapping engines around. The UP/CSX has a train that runs from North Platte Ne, to Selkirk, NY (around Albany) in about 3 days.
|
# ? Jul 13, 2011 20:15 |
|
Geoj posted:So do railroads share engines as well as rolling stock? Here in Ohio I've been seeing BNSF units pulling trains on CSX/NS lines, and according to the system map on BNSF's website they don't go any further east than Chicago. Some times "foreign trains" that have a lot of cars are going to the same general destination will be handed off in what they call "interchange". In some of these cases some or all of the locomotives will stay on. These trains will stay nearly in whole for convenience and efficiency until they get the main destination region. Often times cars going back to the foreign railroad will be collected, put back behind that power, turned around, and sent back to them at the same interchange point. Additionally, with all of the weather related track closures recently, there are "reroutes". With reroutes, there are often foreign trackages that can help you get around your own flooded/washed-out/wrecked tracks. These can also be used in the event of a derailment too. Entire trains will be run on foreign line and then returned to their own line past the area of damage.
|
# ? Jul 13, 2011 20:30 |
|
bytebark posted:Here's what an ALCO RSD-15 "Alligator" (actually the same one pictured on the top of the wiki page) looks/sounds like while being fired up after hibernating for 20+ years. Lots of "Alco smoke" and audio diesel bliss. Reminds me a lot of the british Class 37s - http://www.youtube.com/watch?v=pv_cGG56QA4
|
# ? Jul 13, 2011 23:03 |
|
tehsid posted:Ah, I was wondering if there was a thread for train people on SA. I found it. Is that the train repair centre out in Bayswater?
|
# ? Jul 14, 2011 00:12 |
|
meltie posted:Reminds me a lot of the british Class 37s - http://www.youtube.com/watch?v=pv_cGG56QA4 For some reason, I figured they'd use an air start on something that big. Just how big are the starters on those things?
|
# ? Jul 14, 2011 00:16 |
|
You Am I posted:I didn't properly read the start of this post and then I saw the last photo and thought "I recognise those buckets of poo poo" Na, we're out in Newport.
|
# ? Jul 14, 2011 03:23 |
|
some texas redneck posted:For some reason, I figured they'd use an air start on something that big. I'm more interested in the knocking noise on startup? Is that even remotely normal??? Last diesel I encountered that made that kind of noise is in my shed getting a full tear down and rebuild!!!
|
# ? Jul 14, 2011 05:20 |
|
Ferremit posted:I'm more interested in the knocking noise on startup? Is that even remotely normal??? Last diesel I encountered that made that kind of noise is in my shed getting a full tear down and rebuild!!! They're such low RPM, judging by the video at least that's the sound of an exhaust valve opening?
|
# ? Jul 14, 2011 14:20 |
|
meltie posted:They're such low RPM, judging by the video at least that's the sound of an exhaust valve opening? Sounded like it was just one of the cylinders firing, then they seemed to add more in as the engine sped up. It also got worse as the engine revved up, then died off as it spun down.
|
# ? Jul 14, 2011 21:08 |
|
tehsid posted:Na, we're out in Newport. Is the train museum still down there?
|
# ? Jul 15, 2011 00:27 |
|
This is the perfect opportunity to post one of my favorite train pictures I've taken. It's not really going to give you an engineering boner, but it does well to represent the great relationship that some places have with rail. http://imgur.com/pNtBx Rocky Neck State Park in Connecticut.
|
# ? Jul 15, 2011 00:48 |
|
You Am I posted:Ah, that kinda makes sense with all the mist, being near the sea. I thought it was Bayswater cos of the all fog at this time of the year around that area. I had no idea that there was any sort of museum there! I think I'll have to check this one out! (if its still there!) [edit]: Just checked the website http://www.arhsvic.org.au/ and it is apparently closed for works in Feb 2010 - it appears they don't update their website very much! auzdark fucked around with this message at 01:25 on Jul 15, 2011 |
# ? Jul 15, 2011 01:22 |
|
You Am I posted:Ah, that kinda makes sense with all the mist, being near the sea. I thought it was Bayswater cos of the all fog at this time of the year around that area.
|
# ? Jul 15, 2011 06:12 |
|
Red Marx posted:This is the perfect opportunity to post one of my favorite train pictures I've taken. It's not really going to give you an engineering boner, but it does well to represent the great relationship that some places have with rail. I always liked going to Rocky Neck as a kid, mainly to watch the trains. This was before the Acela electrification. At that time the old telegraph poles were still standing, and there was no security fence. I'm surprised there weren't accidents there, as it was easy to get to the ROW. There is also a pedestrian bridge up near the WPA-built pavilion that crosses over the tracks. It always seemed so high up as a kid, but it really isn't that high. All in all a nice place to explore and see a few trains go by.
|
# ? Jul 15, 2011 11:56 |
|
tehsid posted:
Those look like the BART subway trains in San Francisco, California.
|
# ? Jul 31, 2011 02:14 |
|
CharlesM posted:Those look like the BART subway trains in San Francisco, California. I seem to remember a big hubbub about the newer cars/trains for BART being made in France years ago when I lived there. found this: http://homepage.mac.com/lpetrich/www/transit/BA_Transit.html quote:In the late 1980's, BART bought from Alsthom of France (of TGV fame) 150 flat-cab cars
|
# ? Aug 1, 2011 20:00 |
|
I just recently applied for a job with bnsf in denver. Crossing my fingers!
|
# ? Aug 1, 2011 20:08 |
|
Yay, a train thread! Rockport Trains by jpitha, on Flickr Since I take the commuter rail every day, I wind up taking a lot of photos of it, and am generally interested in the rolling stock and motive power. My knowledge is really limited to the MBCR and the T though I really like Mass transit and try to ride trains and subways and trollies whenever I visit a new city.
|
# ? Aug 1, 2011 21:12 |
|
Youtube model train videos are almost always embarrassing and dorky and set to bad music. Not this one: http://www.youtube.com/watch?v=cC0r_AXOss4 1. Holy poo poo, the sound. I am in love with the first 30 seconds or so of that video. 2. Look at the job this guy did of modeling the Tropicana Juice Train. 3. Yes, he's modeling the New York Central as if it never went away.
|
# ? Aug 5, 2011 22:29 |
|
Not to derail but, this is train related. If you lived here imagine the aluminum you could collect. http://www.youtube.com/watch?v=Z3yiRStQaHU&feature=related This too: http://www.youtube.com/watch?v=Sh1nFd4oqcc&feature=related I love the crash beam to protect the bridge from these idiots causing a derailment. B4Ctom1 fucked around with this message at 00:11 on Aug 6, 2011 |
# ? Aug 6, 2011 00:08 |
|
B4Ctom1 posted:Not to derail but, this is train related. If you lived here imagine the aluminum you could collect. Less derailment and more incredibly expensive damage to the bridge structure for each moron that hits it.
|
# ? Aug 6, 2011 02:19 |
|
Yeah, even if the bridge isn't damaged, you're going to need to send out someone to assess it anyway.
|
# ? Aug 7, 2011 00:19 |
|
Holy gently caress! New traincam video of freight train hitting a piece of track hanging over a washout. http://www.liveleak.com/view?i=a22_1312744691 like this:
|
# ? Aug 8, 2011 07:31 |
|
B4Ctom1 posted:Holy gently caress! New traincam video of freight train hitting a piece of track hanging over a washout. Holy.poo poo. How the gently caress did it not derail? Or did it and just manage to stay upright?
|
# ? Aug 8, 2011 08:35 |
|
some texas redneck posted:
Derailed badly, pure luck it kept moving forward shiny side up and windshield forward.
|
# ? Aug 8, 2011 09:05 |
|
Any links to a report on the incident?
|
# ? Aug 8, 2011 09:51 |
|
B4Ctom1 posted:Holy gently caress! New traincam video of freight train hitting a piece of track hanging over a washout. From the comments: quote:Goddamn graboids are getting smarter! That is seriously horrifying though. What an awful noise.
|
# ? Aug 8, 2011 13:06 |
|
some texas redneck posted:
I think there's a video earlier in this thread showing attempts to blow up railway track in WW2 for derailing trains. They're surprisingly capable of jumping extremely large gaps in track and staying forward and upright, if not completely railed.
|
# ? Aug 9, 2011 15:29 |
|
For what its worth, there has been 2 derailments... in the same spot in Denison, IA http://www.ktiv.com/story/15182792/denison-ia-derailment-spills-coal-closes-crossing I work on this line. I don't know what happened exactly, but either way . For what its worth, this is the double main that connects pretty much the west coast to the east. Before the recession, we would regularly move about 80 some trains a day.... Now its a little slower at roughly 65ish. http://youtu.be/GtDbsBNBlio This will give you just a small peak of how many trains we move.
|
# ? Aug 9, 2011 17:17 |
|
|
# ? May 15, 2024 02:57 |
|
BrokenKnucklez posted:For what its worth, this is the double main that connects pretty much the west coast to the east. Before the recession, we would regularly move about 80 some trains a day.... Now its a little slower at roughly 65ish. Yup, I went to school at ISU in Ames and holy poo poo, there were a LOT of trains passing through there. When I wanted a scenic drive home to Omaha I'd take US 30 which parallels the UP main line for much of the trip. I was disappointed I never got to get down to see the Kate Shelley High Bridge (highest double track trestle in the U.S.) while I was there because the area was closed for constructing the new span.
|
# ? Aug 10, 2011 04:40 |