|
It seems like Linksys is releasing some new models, including this guy: http://www.amazon.com/Linksys-EA3500-App-Enabled-Dual-Band-Wireless-N/dp/B007IL6OR2/ref=dp_ob_title_ce I know it going to far too too early to tell if they're any good, but based on specs or whatever, is it worth holding off on an e3000 and getting one in a month or two when there's been at one firmware update?
|
# ? Apr 15, 2012 14:44 |
|
|
# ? May 15, 2024 03:33 |
|
Correct me if I'm wrong but aren't most(all?) of the new Linksys models incompatible with Tomato? I currently have a gimped DD-WRT and am looking to upgrade to a new router from my WRT54G2. From what I've read, Tomato is overall a lot more stable/solid while DD-WRT varies between firmware versions/who programs it/etc. Is there any reason to buy the shiniest new Linksys out there? Currently looking at a used/refurbished E3000 if that makes any difference.
|
# ? Apr 15, 2012 15:18 |
|
Rexxed posted:I believe the thread consensus is that the airport express is pretty bad, while its big brother is decent (the airport extreme I think?) There were some recent posts about it in the last couple of weeks. A better router would probably help a lot, being in the same room and having connection issues is indicative of a problem. The Express is a serviceable WAP, but a terrible router.
|
# ? Apr 15, 2012 15:30 |
|
Roving Reporter posted:Correct me if I'm wrong but aren't most(all?) of the new Linksys models incompatible with Tomato?
|
# ? Apr 15, 2012 16:04 |
|
Just picked up a ASUS RT-N66U to replace my old setup. I'm really glad I did. I absolutely love it. Even with just the updated firmware from ASUS I think it's great.
|
# ? Apr 15, 2012 16:12 |
|
I've been using a VPN tunnel service recently and I've been noticing that my upload speeds triple when I use it meanwhile my download speed is halved. Despite this my torrent downloads increase by a lot. Is the VPN tunnel somehow bypassing my ISPs pipeline restrictions? Edit: Also how can I harness this power for hosting games/other things? MOVIE MAJICK fucked around with this message at 22:31 on Apr 15, 2012 |
# ? Apr 15, 2012 22:28 |
|
VitaminZinc posted:Just picked up a ASUS RT-N66U to replace my old setup. I'm really glad I did. I absolutely love it. Even with just the updated firmware from ASUS I think it's great. I really want one, but I don't know if the cost is worth it over an n16 and n12 set as a WAP. The extra money could go to a bunch of beer or diapers or something.
|
# ? Apr 16, 2012 00:35 |
|
Tesla Was Robbed posted:I really want one, but I don't know if the cost is worth it over an n16 and n12 set as a WAP. The extra money could go to a bunch of beer or diapers or something. Yeah, probably not as much of an upgrade for you if you already have that. I had a wired dlink with a dlink WAP hooked on. My situation is like going from a bicycle to a Harley...
|
# ? Apr 16, 2012 00:45 |
|
VitaminZinc posted:Just picked up a ASUS RT-N66U to replace my old setup. I'm really glad I did. I absolutely love it. Even with just the updated firmware from ASUS I think it's great. It has a rather impressive feature list. How stable is you connection?
|
# ? Apr 16, 2012 00:51 |
|
Devian666 posted:It has a rather impressive feature list. How stable is you connection? I've only been hooked up for a few days, but so far it's drat stable. Laptop on the exact opposite side of the house downloads about as fast as if it were in the same room. Also, who could resist a router that's called "The Dark Knight"...
|
# ? Apr 16, 2012 01:27 |
|
WYA posted:I've been using a VPN tunnel service recently and I've been noticing that my upload speeds triple when I use it meanwhile my download speed is halved. Despite this my torrent downloads increase by a lot. Is the VPN tunnel somehow bypassing my ISPs pipeline restrictions? Bit torrent speeds go to poo poo when your upload gets capped out. If you manually set your upload speed to slightly less than your maximum, it should help your download speeds.
|
# ? Apr 16, 2012 04:38 |
|
It's possible your ISP is throttling your connection based on the fact it's transferring a lot of data to a lot of destinations and from a lot of sources. With a VPN, all your ISP sees is one big transfer (though if they were clever they could probably take a good guess that you're torrenting anyway).
|
# ? Apr 16, 2012 06:40 |
|
Devian666 posted:It has a rather impressive feature list. How stable is you connection? I'm running Tomato on this guy (ASUS RT-N66U) and it's been rock solid for about a month.
|
# ? Apr 16, 2012 06:47 |
|
Some VPN providers will assign you a publicly routable IP address, which might help BitTorrent a lot, specifically if you haven't configured port forwarding or UPNP on your regular connection. If that's the case then it has nothing to do with throttling.
|
# ? Apr 16, 2012 07:17 |
|
UndyingShadow posted:I'm running Tomato on this guy (ASUS RT-N66U) and it's been rock solid for about a month. Could you provide a link to the tomato build. I'm not an expert on tomato but I'm thinking about a minor op update.
|
# ? Apr 16, 2012 09:11 |
|
Per my question on the last page, I just bought a new router (Netgear WNDR 3700). When I set it up and it asks me to input my PPPoE settings, it takes them and says it successfully connected to the Internet (when I input my info wrong it tells me so). However, when I'm finished with setup I have no internet access. In the router manager I don't have an IP address or DNS server (both are set to be assigned automatically), but on my devices each show up as having IP and DNS of 192.168.1.x. Windows troubleshooting tells me it's my modem, and Lenovo Diagnostic tools tells me to check my firewall. If I plug my old crappy router back in, it works fine. My friend, who set up the old router and has forgotten the password to access its settings (so I can't compare them), tells me all that was needed was the PPPoE info. Does anyone have any idea what the likely problem is?
Mozi fucked around with this message at 12:58 on Apr 16, 2012 |
# ? Apr 16, 2012 12:53 |
|
Mozi posted:Per my question on the last page, I just bought a new router (Netgear WNDR 3700). When I set it up and it asks me to input my PPPoE settings, it takes them and says it successfully connected to the Internet (when I input my info wrong it tells me so). However, when I'm finished with setup I have no internet access. In the router manager I don't have an IP address or DNS server (both are set to be assigned automatically), but on my devices each show up as having IP and DNS of 192.168.1.x. Windows troubleshooting tells me it's my modem, and Lenovo Diagnostic tools tells me to check my firewall. If I plug my old crappy router back in, it works fine. My friend, who set up the old router and has forgotten the password to access its settings (so I can't compare them), tells me all that was needed was the PPPoE info. Does anyone have any idea what the likely problem is? Who is your ISP, and what kind of DSL modem are you using? Does the new router show a valid WAN IP? On a personal note, with the amount of streaming I'm doing to various devices in my house, I need to upgrade to something faster than a 54G connection. I need a WAP/bridgeable router that can act as a gigabit switch and a N access point. The upgrade is mostly being driven by streaming 1080P stuff to an ATV3 and iPads/iPhones. I would love to stay under 50 bucks, but will consider anything under 100 for this particular project. skipdogg fucked around with this message at 16:57 on Apr 16, 2012 |
# ? Apr 16, 2012 16:54 |
|
Mozi posted:Per my question on the last page, I just bought a new router (Netgear WNDR 3700). When I set it up and it asks me to input my PPPoE settings, it takes them and says it successfully connected to the Internet (when I input my info wrong it tells me so). However, when I'm finished with setup I have no internet access. In the router manager I don't have an IP address or DNS server (both are set to be assigned automatically), but on my devices each show up as having IP and DNS of 192.168.1.x. Windows troubleshooting tells me it's my modem, and Lenovo Diagnostic tools tells me to check my firewall. If I plug my old crappy router back in, it works fine. My friend, who set up the old router and has forgotten the password to access its settings (so I can't compare them), tells me all that was needed was the PPPoE info. Does anyone have any idea what the likely problem is? Are you sure your modem isn't making the connection? If your modem is connecting itself (has the log in details for your connection) you can select the option under does your connection require a log in to NO. Then all you need is to input your modem's IP address, subnet mask and gateway address. All of which will be on a different subnet to the router and the devices connected to the router. I recommend checking the settings on your modem because if it has connection and log in details then it's unnecessary to access your old router.
|
# ? Apr 16, 2012 17:32 |
|
OpenVPN question: I want to be able to access my home server from far away, and in particular I want to be able to mount shared folders. I enabled VPN tunneling on my tomato-flashed Linksys E3000, generated various keys, and setup Tunnelblick on my laptop. It seems to connect successfully, but trying to mount a folder (using the IP which would have been local if I was connected to the same network as the server), times out. When I check the IP address of my laptop, it's the same as it was before the VPN connection was established (I was expecting to see the IP of the network on which the VPN server is located). I've tried alternating between TUN/TAP, and checking "sending all traffic through VPN connection", all to no avail. Even tried setting up a PPTP VPN connection, connecting it it via system preferences, and while it still seems to connect successfully, everything is exactly like trying to connect with Tunnelblock to OpenVPN. Am I completely misunderstanding what a VPN is and what it's used for?
|
# ? Apr 17, 2012 17:31 |
|
Cockwhore posted:OpenVPN question: What operating system is your server running? If I remember correctly I had to go into my Windows Server 2k8 install and tell it to accept connections from a VPN. Not sure how it knew it wasn't a local connection, though.
|
# ? Apr 17, 2012 22:40 |
|
Triikan posted:What operating system is your server running? If I remember correctly I had to go into my Windows Server 2k8 install and tell it to accept connections from a VPN. Not sure how it knew it wasn't a local connection, though. It's a Synology server running a flavor of Linux called busybox. Looking through the documentation I can't find anything about accepting connections from a VPN. I was under the impression that once I've connected, it would be indistinguishable from being on my home network (albeit slower, obviously). Is my understanding wrong?
|
# ? Apr 17, 2012 23:01 |
|
Hey guys, I need a little help. I have a Linksys WRT-320n. I am tired of unplugging it every few days to get it to run at full speed again. I want to flash TomatoUSB to it. Is there anything special I need to do? DD-WRT instructions I noticed you need to install a different kind first. I already figured out I need Kernel 2.6 and MIPSR2 from the TomatoUSB site. I see Shibby and Toastman are popular branches of TomatoUSB but their websites are a little intimidating, just being file folders with tons of different versions. I am afraid of picking the wrong one. Is there anyway to check first, or does anybody else have the same model? I really appreciate the help, I know it is kind of basic but I just don't want to mess up.
|
# ? Apr 19, 2012 02:38 |
|
My SO just moved into a small new apartment and needs a wireless router for her macbook pro for (hopefully) under $60. What should I tell her to get?
|
# ? Apr 19, 2012 18:39 |
|
Avian Pneumonia posted:My SO just moved into a small new apartment and needs a wireless router for her macbook pro for (hopefully) under $60. What should I tell her to get? The routers in the OP are pretty decent. Depending how willing you are to tinker, I'd try the monoprice one, then look into more expensive options if it doesn't pan out. If you don't want to have any possibility of problems, go for the mid range ones right off the bat. The E2000 is right at your price range on Amazon at the moment.
|
# ? Apr 19, 2012 19:04 |
|
Is there any reason I shouldn't go with the monoprice unit? Is it worth the extra dough to go for the e2000? Also: Is there anything I should know/keep in mind given that this would be for a macbook pro? I know almost nothing about apple, letalone their wireless situation.
|
# ? Apr 19, 2012 21:13 |
|
The wireless on Apple computers is completely stock. There's some quirks in their routers, but there's no gotchas on their desktops, laptops, or iOS devices.
|
# ? Apr 19, 2012 21:50 |
|
Avian Pneumonia posted:Is there any reason I shouldn't go with the monoprice unit? Is it worth the extra dough to go for the e2000? Do not buy the monoprice wireless N router. It's a steaming, flaming, gurgling pile of fetid poop. We've RMA'ed 16 of the bastards out of 20 ordered and I'll personally happily stomp the poo poo out of any more I find in the field. They are horrible. It's too bad, a lot of monoprice's stuff is cheap *and* good, this was just cheap.
|
# ? Apr 19, 2012 22:32 |
|
I'm looking at 100mbit downstream cable service. My present service (Uverse, ugh) has an ISP-provided router so I'll need to get myself a router, which is fine. I suppose what I'm asking is, would any decent router be able to handle that fast of a WAN connection just fine, or should I be looking at faster/more expensive routers? My only real requirements are 802.11n with MIMO and a gigabit switch in the router. I need to do some port forwarding but nothing too complicated.
|
# ? Apr 19, 2012 23:11 |
|
Make sure whatever you're looking at is at 100 or higher (preferably a bit higher if your provider does Speed Boost) on this chart: http://www.smallnetbuilder.com/lanwan/router-charts/view
|
# ? Apr 19, 2012 23:17 |
|
Hmmmmm. Local store (Micro Center) has the Asus Black Diamond for $109, so...why wouldn't I just go with the fastest drat router on that list? Anyone have that router?
|
# ? Apr 19, 2012 23:28 |
|
Powdered Toast Man posted:Hmmmmm. Local store (Micro Center) has the Asus Black Diamond for $109, so...why wouldn't I just go with the fastest drat router on that list? Anyone have that router? http://www.smallnetbuilder.com/wireless/wireless-reviews/31436-asus-rt-n56u-black-diamond-dual-band-gigabit-wireless-n-router-reviewed The downsides appear to be: no custom firmware support, no 450mbps Wi-Fi
|
# ? Apr 19, 2012 23:31 |
|
I'm trying to figure out the best way to accomplish something. I have a Belkin Share Max N300 (F7D3301/F7D7301) v1 running Tomato 1.28 (Toastman VPN USB) or something along those lines so I can hook my NTFS HDD to it; I've got a Buffalo WHR-HP-G300N running V24-SP2 build 18289 of DDWRT. I'd like to join them together (wirelessly) to extend my network outside my house. I tried WDS, but had no luck. I also did a site survey on the DDWRT router, and joined the network from the Belkin, set the right key, and had no luck. Is there anything else I can try?
|
# ? Apr 20, 2012 02:01 |
|
uapyro posted:I'm trying to figure out the best way to accomplish something. If you want to do this, you'll need to set up WDS. It's a pain in the rear end, and it absolutely kills bandwidth (I hope you weren't hoping to stream any files over that connection) but it should work. Make sure you set both routers to WDS mode, duplicate the wireless setup exactly (same SSID, same channel manually set, same exact security) and give them each other's MAC addresses.
|
# ? Apr 20, 2012 02:49 |
|
Powdered Toast Man posted:Hmmmmm. Local store (Micro Center) has the Asus Black Diamond for $109, so...why wouldn't I just go with the fastest drat router on that list? Anyone have that router? I had it in the op for a while but dropped it specifically because it's unstable and no custom firmware to make it worth the money.
|
# ? Apr 20, 2012 05:24 |
|
Space Gopher posted:If you want to do this, you'll need to set up WDS. It's a pain in the rear end, and it absolutely kills bandwidth (I hope you weren't hoping to stream any files over that connection) but it should work. Make sure you set both routers to WDS mode, duplicate the wireless setup exactly (same SSID, same channel manually set, same exact security) and give them each other's MAC addresses. Thanks, I believe it was only the channel I was missing! Luckily, it'll only be for web browsing outside the house. Would there be an easy way to assign different IP addresses for the DDWRT device? Would a virtual wireless network (second SSID) work when I have WDS setup right?
|
# ? Apr 20, 2012 05:48 |
|
gently caress, is there a modern day equivalent of the WRT54GL? I'm running one with Tomato, and it's great, but I'm not sure I want to stick with it since there are so many forks now. Though looking at DD-WRT, the project as a whole seems pretty fragmented. I had 0 problems with Tomato on the WRT54GL, is there a modern day equivalent God router (aka one that does N well)? I'm willing to switch to DD-WRT, or go with a tomato fork that's going to be around for more than two months.
|
# ? Apr 20, 2012 06:10 |
|
Another question about extending WiFi range, but with a slightly different setup. I have a plain Linksys router that has routing turned off and is essentially just a wireless access point. The actual routing is done through a NAT gateway setup on a HTPC/home server. There already is some CAT-5 cabling running to where the new WAP would be. With that in mind, am I correct to conclude that I can simply get another router, set it up with the same SSID, WPA key and channel, and hook it up to the Ethernet network with no added setup necessary?
|
# ? Apr 20, 2012 13:30 |
|
FISHMANPET posted:gently caress, is there a modern day equivalent of the WRT54GL? I'm very happy with my Asus rt-16n. I picked it up last week and was looking for the same thing you are.
|
# ? Apr 20, 2012 13:39 |
|
Devian666 posted:I had it in the op for a while but dropped it specifically because it's unstable and no custom firmware to make it worth the money. What about the Black Knight? (I want to make a Monty Python joke so bad)
|
# ? Apr 20, 2012 14:50 |
|
|
# ? May 15, 2024 03:33 |
|
So, I ordered a Buffalo WZR-HP-G300NH and got a G300NH2 from Newegg. Does this version still work with DD-WRT or Gargoyle?
|
# ? Apr 20, 2012 15:38 |