|
welp, my company just spent $8000 on 30 new CloudRouter Switches and 2 new CloudCores. Woo! They're to replace aging 2948s, but dear god I hope this doesn't wind up biting my company in the rear end.
|
# ? Feb 26, 2014 06:00 |
|
|
# ? Jun 5, 2024 06:03 |
|
Run that through cloud to butt and post again. Condolences on trying to manage all that.
|
# ? Feb 26, 2014 06:27 |
|
jeeves posted:welp, my company just spent $8000 on 30 new CloudRouter Switches and 2 new CloudCores. Woo! They're to replace aging 2948s, but dear god I hope this doesn't wind up biting my company in the rear end. O_O good lord that's a lot of hardware. Good luck to you on those.
|
# ? Feb 26, 2014 06:34 |
|
CuddleChunks posted:O_O good lord that's a lot of hardware. Good luck to you on those. yeah, major WISP infrastructure overhaul.
|
# ? Feb 26, 2014 07:53 |
|
Anyone know if Winbox saves the saved password somewhere non-hashed? I forgot it
|
# ? Mar 3, 2014 19:13 |
|
If it's saved in Winbox can't you just login and change it using the CLI, or load a new config on with your new password?
|
# ? Mar 3, 2014 19:16 |
|
Caged posted:If it's saved in Winbox can't you just login and change it using the CLI, or load a new config on with your new password? When I set this up, I did it from a local network and didn't setup remote/external access. Then I gave the device to someone to use at home and now I'm trying to access it by remoting into their desktop and accessing the web interface. kiwid fucked around with this message at 19:26 on Mar 3, 2014 |
# ? Mar 3, 2014 19:22 |
|
Any good? http://localloop.co.za/2008/10/reading-mikrotiks-winbox-addresseswbx-file-format/
|
# ? Mar 3, 2014 19:27 |
|
Caged posted:Any good? http://localloop.co.za/2008/10/reading-mikrotiks-winbox-addresseswbx-file-format/ Awesome! it works.
|
# ? Mar 3, 2014 19:42 |
|
|
# ? Mar 3, 2014 19:43 |
|
So, my CEO is having issues with her wireless at home (low signal and random drops) which is a RB951G-2HnD that I've setup to replace her old lovely Linksys device that she was also having issues with. I believe it might be an interference issue now. I changed the channel which appears to have worked for now, but I'm thinking that she might need to get off the 2.4GHz frequencies. I see that Mikrotik doesn't really offer a 5.8GHz option, any recommendations?
|
# ? Mar 3, 2014 21:23 |
|
If she doesn't have any strange requirements then get an AirPort and forget about it. They are rock solid.
|
# ? Mar 3, 2014 21:28 |
|
It's weird that Mikrotik hasn't marketed a dual-band SOHO router. I'm sure there are a bunch of people who would buy a RB952UG-52nD for $100-$150.
|
# ? Mar 3, 2014 21:35 |
|
You're right. 2.4GHz is unusable in any sort of built-up area now.
|
# ? Mar 3, 2014 21:55 |
|
2.4GHz is even unusable in many rural areas, because WISPs tend to use it for last-mile. I know from my WISP days, it was always fun making sure a customer's cheapo Linksys router wasn't running on the same channel as their service connection, making them both perform terribly. If you want to stick with Mikrotik gear, you'll have to buy an add-on 5GHz card and matching antennas and pigtails, which will easily add $50 to the price of your gear. Or, like Caged said, get an Apple Airport or Time Capsule (the latter gives you a big hard drive and if they're Mac users free backups). It's solid stuff.
|
# ? Mar 3, 2014 22:46 |
|
For dual band use, ive had excellent luck using this: http://www.newegg.com/Product/Product.aspx?Item=N82E16833320062 With this third party firmware(dd-wrt isn't available on this router) https://code.google.com/p/rt-n56u/
|
# ? Mar 3, 2014 23:30 |
|
5 is going to get just as bad, wireless sucks. edit: 66 items on my scanner
|
# ? Mar 4, 2014 00:56 |
|
The next time someone has a go at Wi-Fi standards it needs to have a feature that can't be disabled that will ramp the Tx power down as low as it can. People in one bed apartments don't need their Wi-Fi network to be accessible 20m down the hall, it just fucks it up for everyone. Although you will always get people who shove on bigger antennas and custom firmware to get a stupidly high Tx power because they don't understand how RF works.
|
# ? Mar 4, 2014 01:08 |
|
thebigcow posted:5 is going to get just as bad, wireless sucks. Not always. I live in a heavily saturated area and have good luck with the 5ghz spectrum. It doesn't punch through walls and crap nearly as well, which means it's easier to deal with in apartments and neighborhoods.
|
# ? Mar 4, 2014 02:33 |
|
Before I buy this Airport Extreme, can it be put in AP only mode? She already has a comcast modem that is also a router which does firewall+nat and I don't really want to gently caress with having her put it in bridged mode over the phone.
|
# ? Mar 4, 2014 17:49 |
|
kiwid posted:Before I buy this Airport Extreme, can it be put in AP only mode? Yes.
|
# ? Mar 4, 2014 17:57 |
|
kiwid posted:Before I buy this Airport Extreme, can it be put in AP only mode? She already has a comcast modem that is also a router which does firewall+nat and I don't really want to gently caress with having her put it in bridged mode over the phone. Get a Ubiquiti UniFi AP. They are wonderful.
|
# ? Mar 5, 2014 04:05 |
|
Kaluza-Klein posted:Get a Ubiquiti UniFi AP. They are wonderful. I'd have to get the Pro for the 5GHz and that's $235
|
# ? Mar 5, 2014 14:55 |
|
kiwid posted:I'd have to get the Pro for the 5GHz and that's $235 Or save some money over that or the extreme. Asus RT-N56 or RT-N66 $90 and $130 respectively, and most Best Buys carry them. Slap DD-WRT or another third party firmware on, and you're good to go.
|
# ? Mar 6, 2014 05:03 |
|
kiwid posted:I'd have to get the Pro for the 5GHz and that's $235 They're really worth it if you want something that 'just works'. I've had the 2.4Ghz model running in my home for a couple of years now and after setting it up I've never had to touch it. For any reason. Ever. It even doubles as a nice nightlight in the hallway where it's mounted .
|
# ? Mar 6, 2014 05:33 |
|
Out of curiosity, is it necessary to specify your desired DNS server(s) under IP -> DHCP Server -> Networks -> (properties of DHCP network)? I had OpenDNS servers configured here, and also under IP -> DNS. I was rattling my brain trying to figure out why after updating IP -> DNS with new DNS servers the workstations on the network weren't updating their DNS servers. I had forgot I had it specified under DHCP Server as well. The only difference I can see after removing them from DHCP Server is now from a workstation under ipconfig /all, the workstation is talking to the router gateway first for DNS, then the other two DNS servers I've specified. Will this cause issues? Should I re-specify the DNS server addresses under DHCP Server or leave the fields empty? Do I need to specify a new NAT rule in Firewall to force all devices to use my desired DNS servers? It looks like things are working fine.
|
# ? Mar 8, 2014 00:50 |
|
Generically, DNS under IP would be for the device itself. Under DHCP it is what it hands to clients. It is listed first, the others backup. It probably relays requests to the IP > DNS server, like any home router type thing. Your network hosts should use it first, then the others if lookup fails or times out. I'm sure you can turn off internal DNS server or remove its advertisement.
|
# ? Mar 8, 2014 00:58 |
|
Partycat posted:Generically, DNS under IP would be for the device itself. Under DHCP it is what it hands to clients. It is listed first, the others backup. It probably relays requests to the IP > DNS server, like any home router type thing. Your network hosts should use it first, then the others if lookup fails or times out. I'm sure you can turn off internal DNS server or remove its advertisement. Thanks for the clarification. Second question-- Has anyone experienced issues related to clients connected to your MikroTik router's WiFi randomly dropping the connection? I have a Chromecast, Android phone and WDTV Live that have not experienced loss of WiFi connectivity but I'm getting reports of an iPhone, Kindle and laptop losing connectivity randomly. Allegedly the devices will disconnect from the WiFi then reconnect when they feel like it. I haven't worked on troubleshooting the issue yet, but I imagine using Torch, monitoring IP -> Firewall -> Connections and watching the wireless clients under Quick Set would be my best bet, right? Just thought I would ask. Looking at other WiFi APs around me, it would appear as though I only share mine with two or three other networks in the same frequency.
|
# ? Mar 8, 2014 01:11 |
|
It could just be some insane power saving settings. Do they have a common wifi chip?
|
# ? Mar 8, 2014 05:51 |
|
thebigcow posted:It could just be some insane power saving settings. Do they have a common wifi chip? I'm not too sure. The laptop I'm trying to sell on eBay for parts as it's had some water damage so I blame any hardware problems on that. The Kindle is one of the original ones so it's getting pretty old. The iPhone is a 4S that's fairly new so I'm not sure about that.
|
# ? Mar 8, 2014 17:28 |
|
Wow, this is definitely some strange stuff. Finally able to reproduce the issue on the Kindle and I monitored the log on my RB951G-2HnD. Below are screen-captures of what happened from the time the Kindle was initially used to maybe five minutes after using the Netflix app on it to stream to the Chromecast. (These are the two affected devices but the Kindle is the one with the most trouble in the log) Haven't researched this yet as it just happened, but it sounds like the Kindle is sending data that the Mikrotik doesn't understand so it drops it from the WiFi completely, but that seems to happen after there's a group key exchange timeout. I don't see anything unusual occurring in Torch or in the Firewall connections. From a configuration standpoint on the Kindle, there's nothing I can change aside from what WiFi network to connect to. No advanced settings from what I can tell.
|
# ? Mar 8, 2014 19:00 |
|
zennik posted:Not always. I live in a heavily saturated area and have good luck with the 5ghz spectrum. It doesn't punch through walls and crap nearly as well, which means it's easier to deal with in apartments and neighborhoods. Not only does it have shorter range, but there are a lot more useful channels. 2.4GHz has three non-overlapping channels, four if you're somewhere that can use channel 14. 5GHz has many more and doesn't make the mistake of allowing users to select "middle" channels which would overlap with two of the ideal non-overlapping channels.
|
# ? Mar 8, 2014 19:24 |
|
Looks like some other devices are having issues now. My Nexus phone is receiving the same "extensive data loss" error in the MikroTik log as well as "data from unknown device, sending deauth". Not sure what's happening or what's causing it. Is my router making GBS threads the bed?
|
# ? Mar 8, 2014 19:33 |
|
How is your network set up with regards to client authentication ?
|
# ? Mar 9, 2014 00:09 |
|
Partycat posted:How is your network set up with regards to client authentication ? I've enabled wireless debug logging now so hopefully that might provide some new information when the problem does occur again. PUBLIC TOILET fucked around with this message at 01:44 on Mar 9, 2014 |
# ? Mar 9, 2014 00:31 |
|
zennik posted:Or save some money over that or the extreme. Well, I guess I'm going to take your advice here. I was all excited to get a MikroTik at home and play with it too, but lol no way am I not going for 5Ghz.
|
# ? Mar 10, 2014 03:49 |
|
Well, should anyone encounter the same WiFi issues I've been experiencing with a MikroTik, there's an option in the advanced wireless configuration that may alleviate the problem.
Not a whole lot of information on it, but there's a short write up of the feature here.
|
# ? Mar 11, 2014 01:34 |
|
I finally started playing with my RB2011.
|
# ? Mar 12, 2014 05:51 |
|
wolrah posted:5GHz has many more and doesn't make the mistake of allowing users to select "middle" channels which would overlap with two of the ideal non-overlapping channels. Sure it does.
|
# ? Mar 14, 2014 01:21 |
|
|
# ? Jun 5, 2024 06:03 |
|
Does anyone know the minimum system requirements for Winbox?
|
# ? Mar 21, 2014 04:30 |