|
Nhilist posted:Look what I found today, cast iron...fish? Who cares, they were in ratty shape, but a little tlc and I am going to...do, well something with them. They have to be old as all get out, the handles are cast and attached, bought them at antique store for 12 bucks. I thought they were shaped like electric guitars at first
|
# ? May 22, 2015 19:53 |
|
|
# ? May 11, 2024 16:06 |
|
Steve Yun posted:I thought they were shaped like electric guitars at first Why can't it be both? Make cornbread for us in them. Or a giant one-sided taiyaki. Also, lovely granite.
|
# ? May 23, 2015 03:59 |
|
Suspect Bucket posted:Why can't it be both? Make cornbread for us in them. Or a giant one-sided taiyaki. Both ideas are brilliant and I certainly will. Kicking myself for not thinking of the taiyaki. Once I got them cleaned up, we did crab cakes for the first test drive, turned out fantastic, no hot spots and made for a continued nice oily seasoning. Funny story about the counter-top, I was excited to get a picture to show you guys, I fumbled one of them and it landed hard, I did not want to look to see the damage, after my wife pried my eyes open, not a scratch, so here is to granite, it forgives even my clumsiness. Cornbread pictures incoming posthaste.
|
# ? May 23, 2015 06:40 |
|
Nhilist posted:Look what I found today, cast iron...fish? Who cares, they were in ratty shape, but a little tlc and I am going to...do, well something with them. They have to be old as all get out, the handles are cast and attached, bought them at antique store for 12 bucks. fish pancakes?
|
# ? May 26, 2015 23:04 |
|
w00tmonger posted:fish pancakes? fish cakes, duh
|
# ? May 26, 2015 23:56 |
|
Fish pot pie
|
# ? May 27, 2015 10:06 |
|
Going to be doing some dutch oven cooking this weekend while camping. Looking forward to it!
|
# ? Jun 30, 2015 19:04 |
|
I have an old rear end pan I got out of my gramps kitchen after he passed...it doesn't have any brand markers on it, but on the bottom it says 11 1/4 inch and there's a 10 on the handle. Any ideas regarding what size lid I might want for it?
|
# ? Jul 2, 2015 22:58 |
|
Splish posted:I have an old rear end pan I got out of my gramps kitchen after he passed...it doesn't have any brand markers on it, but on the bottom it says 11 1/4 inch and there's a 10 on the handle. Any ideas regarding what size lid I might want for it? Lids fit the skillets. 11 1/4". measure the diameter of the skillet just to confirm if you're unsure.
|
# ? Jul 3, 2015 00:57 |
|
Drifter posted:Lids fit the skillets. 11 1/4". That was what I figured, but it doesn't seem like 11 1/4" lids are available. We'll see if 12" does the trick I suppose.
|
# ? Jul 3, 2015 20:07 |
|
Splish posted:That was what I figured, but it doesn't seem like 11 1/4" lids are available. We'll see if 12" does the trick I suppose. Most likely. A 12 incher's bottom lip will rest on the top of the pan, so it won't be 'snug', but it'll fit fine. I have used other similar sized cast iron pans as lids on occasion, too; sometimes I'll invert if I need the overhead clearance. It works very well. I have a Calphalon stainless steel lid from a pan that I use on my large cast iron. Don't you just have another pot lid/pan that comes close to fitting? Use that. It doesn't have to form a perfect seal, just a decent one. If you decide to buy a lid, make sure the pan handle won't conflict overly much with it making a seal.
|
# ? Jul 3, 2015 21:31 |
|
Drifter posted:Most likely. A 12 incher's bottom lip will rest on the top of the pan, so it won't be 'snug', but it'll fit fine. I had been using a roommate's pan, but I moved and now the cast iron is the biggest thing I have. I think I'll try a 12 incher, I want a cast iron one so I can use it camping.
|
# ? Jul 4, 2015 06:03 |
|
A handle snapped off of one of my Lodge cast iron skillets. That doesn't mean it's useless, but it does make it a bit awkward to work with. Anyone have any ideas on what would be best to use it for that would reduce the awkwardness? Also, I assume I now need to season the site where the handle snapped off to keep it from rusting, right?
|
# ? Aug 16, 2015 00:42 |
Eh I'd just start with a new pan. You could roast or use it on the grill
|
|
# ? Aug 16, 2015 01:03 |
|
Arcsech posted:Also, I assume I now need to season the site where the handle snapped off to keep it from rusting, right? Eh, season implies a whole lotta work. At best you'd just have to wipe/spray it with a scoonch of oil every now and again. You're not cooking on that part, so you only need it to be water-free, not non-stick. And remember, you're not exactly seasoning or coating with oil the outside of the pan, and that doesn't rust. Just keep it dry. If you're super bored you could always drill some small holes near the lip of the broken pan and run heavy wire through it so that you could carry the pan like a picnic basket to help make it less awkward to handle. Drifter fucked around with this message at 01:28 on Aug 16, 2015 |
# ? Aug 16, 2015 01:26 |
|
Arcsech posted:A handle snapped off of one of my Lodge cast iron skillets. That doesn't mean it's useless, but it does make it a bit awkward to work with. Anyone have any ideas on what would be best to use it for that would reduce the awkwardness? Drill a hole in the sides near the top and attach a wire loop.
|
# ? Aug 16, 2015 01:36 |
|
Dude just get a new $15 pan. How did you manage to break a cast iron skillet anyways?
|
# ? Aug 16, 2015 16:39 |
|
TheQuietWilds posted:Dude just get a new $15 pan. How did you manage to break a cast iron skillet anyways? I also wonder this. I have come just short of throwing one of mine off a cliff and haven't even dented it. If you left it out in the yard for a season or two and then smashed it with a sledge you might be able to bust the handle but I can't imagine it happening in normal usage.
|
# ? Aug 16, 2015 17:27 |
|
Crazyeyes posted:I also wonder this. I have come just short of throwing one of mine off a cliff and haven't even dented it. If you left it out in the yard for a season or two and then smashed it with a sledge you might be able to bust the handle but I can't imagine it happening in normal usage. I've seen cheap pans break at the handle.
|
# ? Aug 16, 2015 17:31 |
|
Use it on the grill. Or if you're gonna toss it, I'll take it off your hands.
|
# ? Aug 16, 2015 19:46 |
|
Drill a couple of holes and make a wire handle like dutch ovens have.
|
# ? Aug 16, 2015 20:21 |
|
Cast iron is brittle and he might be unlucky enough for there to be a casting flaw in the handle.
|
# ? Aug 16, 2015 22:41 |
|
Go buy an all-metal vicegrip and clamp that sucker on there hard for a new handle.
|
# ? Aug 16, 2015 23:17 |
|
Just buy a new one? It's not like they are expensive.
|
# ? Aug 17, 2015 00:33 |
|
What about that magic welding crap they sell on TV? I'd just get a new one, though my Lodge has sentimental value... which would depreciate rapidly should the handle ever break.
|
# ? Aug 17, 2015 00:36 |
|
You could also use JB weld to stick any old piece of metal on there. Even the old handle!
|
# ? Aug 17, 2015 01:29 |
|
All that is gold does not glitter, Not all those who wander are lost; The old that is strong does not wither, Deep roots are not reached by the frost. From the ashes a fire shall be woken, A light from the shadows shall spring; Renewed shall be pan that was broken, The crownless again shall be king You know what to do.
|
# ? Aug 17, 2015 03:10 |
|
SymmetryrtemmyS posted:You could also use JB weld to stick any old piece of metal on there. Even the old handle! Is JB weld heat resistant enough?
|
# ? Aug 17, 2015 04:50 |
|
spankmeister posted:Is JB weld heat resistant enough? According to the package I'm looking at it can stand up to 550F when fully cured. JBWeld is epoxy-Jesus.
|
# ? Aug 17, 2015 13:06 |
|
Arcsech posted:A handle snapped off of one of my Lodge cast iron skillets. That doesn't mean it's useless, but it does make it a bit awkward to work with. Anyone have any ideas on what would be best to use it for that would reduce the awkwardness? Flip it the gently caress over and use it for a pizza stone. You've now got an oven-only pan. Hell just throw those $1 Totino's frozen pizzas inside it, fits perfectly. And make deep-dish pizza in it.
|
# ? Aug 17, 2015 14:29 |
|
Crazyeyes posted:According to the package I'm looking at it can stand up to 550F when fully cured. JBWeld is great for fixing leaks, but it's not structural. You could *maybe* weld the handle back on, but welding cast iron is tricky, and unless you work in a welding shop, is going to be more expensive than just replacing the pan. If this was your grandma's 150 year old Griswold, you should drill and tap a hole in the handle and a hole where the handle was, use a steel stud to mechanically connect the two pieces, and then place a weld to hold the connection in place. Of course, at shop rates, that would run you a few hundred bucks.
|
# ? Aug 17, 2015 16:09 |
|
Is this worth $20 or so at my local thrift shop, or would that same $20 be better spent on a lodge? This would be my first cast iron.
|
# ? Aug 17, 2015 16:24 |
|
That is an old Lodge pan made somewhere between 1960 - 1987. I think it's worth buying for $20.
|
# ? Aug 17, 2015 16:33 |
|
Copper Vein posted:Is this worth $20 or so at my local thrift shop, or would that same $20 be better spent on a lodge? This would be my first cast iron. That is a Lodge, made some time between 1960 and 1987 probably, per http://www.castironcollector.com/unmarked.php It'd be a neat piece, and every bit as good (if not maybe a skoch better?) than a modern Lodge. e: f;b
|
# ? Aug 17, 2015 16:34 |
|
Ok, thanks. There's a 8" there as well, maybe I can bargain with em. The skillet surface had some shiny areas to it, I don't know if you can really see it in the pic. Maybe that means somebody scrubbed it kinda rough? Maybe that means the surface will be smoother than a fresh one, but I don't know if that's better. I can't read skillet surfaces like palms, but I have been watching my youtubes and expect to strip the surface and reseason.
|
# ? Aug 17, 2015 16:42 |
|
I just got a lodge griddle as an anniversary gift, so now I have my ideal set of three: large skillet, dutch oven, and griddle. I feel like I can do anything now! I made a sheet pizza over a campfire, I made bacon on the grill, I've made mac and cheese in a smoker... Cast iron is amazing.
|
# ? Aug 17, 2015 17:01 |
|
TheQuietWilds posted:Dude just get a new $15 pan. How did you manage to break a cast iron skillet anyways? It's not that I'm too cheap to buy another (this is my second cast iron skillet, I already have another perfectly functional one), it's just that I don't like throwing away things that are still plenty usable. Even if I get rid of something, if it's still usable I'll either give it to someone who wants to use it or donate it to a thrift store. I'm all about reuse and upcycling and whatnot. Anyway, it just got dropped and landed on the handle, which snapped clean off. QuarkMartial posted:Use it on the grill. Bob Morales posted:Flip it the gently caress over and use it for a pizza stone. You've now got an oven-only pan. These are the kind of things I was looking for. Both excellent suggestions, thanks.
|
# ? Aug 17, 2015 17:07 |
|
Every drat time I read this thread I want to make a pan of cornbread.
|
# ? Aug 17, 2015 21:09 |
|
Bob Morales posted:Every drat time I read this thread I want to make a pan of cornbread. Cast iron pan cornbread is the best thing.
|
# ? Aug 17, 2015 22:07 |
|
|
# ? May 11, 2024 16:06 |
|
MrYenko posted:Cast iron pan cornbread is the best thing. It really is. My wife bought me a mini Crock Pot for my classroom this year. I can't wait to
|
# ? Aug 19, 2015 03:27 |