|
Rotary hammers with quad tip cutters are god mode for masonry drilling. Piece of rebar in there? gently caress YOUR REBAR! IMMA COMING THROUGH!" Ive got a Milwaukee M18 SDS rotary hammer and its awesome, even in plain chisel mode it spalls concrete off like a hot knife through a rib cage.
|
# ? Apr 26, 2016 13:32 |
|
|
# ? Jun 5, 2024 04:59 |
|
mekilljoydammit posted:Had a pretty awesome couple of weeks around my birthday. [...] Awesome. Now get yourself some LED lighting for that seemingly dim space.
|
# ? Apr 26, 2016 13:36 |
|
Jared592 posted:Awesome. Now get yourself some LED lighting for that seemingly dim space. Lighting's on the list. Worried about power though; the circuit going out to the barn is only something like 30 amps, and over the long run I'm definitely going to have to do something about that. Oh well, what would be the fun of buying the house/property and having the work space actually be set up for my needs without needing work?
|
# ? Apr 26, 2016 14:23 |
|
Get a few of these puppies, 38W a piece: http://www.costco.com/4%E2%80%99-LED-Shop-Light-with-Pull-Chain,-2-pack.product.100223617.html
|
# ? Apr 26, 2016 14:29 |
|
Anyone have recommendations for a sub-$250 borescope? I need it to have led lighting on the head and it needs to be able to fit in a spark plug hole.
|
# ? Apr 26, 2016 15:00 |
|
For something you're not using professionally: http://www.ebay.com/itm/5-5mm-Waterproof-USB-Inspection-Camera-Boroscope-Snake-Scope-Endoscope-1-5M-6LED-/391254508961
|
# ? Apr 26, 2016 15:01 |
|
RapeWhistle posted:Anyone have recommendations for a sub-$250 borescope? I need it to have led lighting on the head and it needs to be able to fit in a spark plug hole. tons of different ones on amazon under 25 bucks. quality can be OK but not bad considering how drat cheap they are.
|
# ? Apr 26, 2016 15:26 |
|
I borescoped an air filter housing on a Mercedes S550 just to be funny at the shop. Come to find out it was full of acorns.
|
# ? Apr 26, 2016 15:32 |
|
I got this free bench vise. Babco 35. The jaws are 3.5" but the jaw plates extend wider and these are 3.75". Is it big enough? I have no idea. I haven't seen any smaller than 4". I guess it's good enough? Same exact one - http://www.ebay.com/itm/Vise-Babco-35-SWIVEL-Anvil-back-Oakland-Calif-Made-in-Japan-w-pipe-grips-/252341560783
|
# ? Apr 27, 2016 01:33 |
|
Slightly sideways, but considering how much time i spend cooking, i bought myself a new tool for that. Shun classic 10" chefs knife. This thing is absolutely god mode dicing onions.
|
# ? Apr 27, 2016 15:11 |
|
Ferremit posted:Slightly sideways, but considering how much time i spend cooking, i bought myself a new tool for that.
|
# ? Apr 27, 2016 15:17 |
|
Gorgeous. I'm rocking a Mac Superior Santoku I got for a birthday a couple years ago - wife literally won't use it because every time she tries she accidentally cuts herself. I know I shouldn't laugh at things like that but...
|
# ? Apr 27, 2016 15:35 |
|
My wife sliced her hand open on a Santoku on our second date. I think she still uses that knife all the time (it's beat to poo poo, though).
|
# ? Apr 27, 2016 16:21 |
|
Safety Dance posted:My wife sliced her hand open on a Santoku on our second date. I think she still uses that knife all the time (it's beat to poo poo, though). Rarely does a knife fight on a date lead to a successful marriage - so congrats!
|
# ? Apr 27, 2016 16:30 |
|
The story gets a little better. She was trying to make french toast for dinner for us, and she cut herself pretty badly getting the knife out of the package about an hour before I got there. Her roommate dumped some quikclot on it and then started scrubbing up blood in the kitchen. My wife tried to tell her roommate that the roommate didn't need to clean up my wife's blood, and the roommate replied, "But you've got a boy coming over!"
|
# ? Apr 27, 2016 16:47 |
|
Any opinions on the Aircat 800? I'm delving into air tools and my first purchase will be a quiet low torque 1/4" air ratchet for tiny fasteners.
|
# ? Apr 27, 2016 16:55 |
|
RapeWhistle posted:Anyone have recommendations for a sub-$250 borescope? I need it to have led lighting on the head and it needs to be able to fit in a spark plug hole. http://www.amazon.com/DEWALT-DCT410S1-12V-Inspection-Camera/dp/B0043XX89K Have six of these, most are 3+ years old and doing flood damage inspection every day. Only one failure. Probably more than you need, but the removable screen is loving awesome and the picture is pretty good.
|
# ? Apr 27, 2016 17:44 |
|
Ferremit posted:Slightly sideways, but considering how much time i spend cooking, i bought myself a new tool for that. I also got myself a Japanese chefs knife, and holy hell are they amazing. My girlfriend managed to pull something which dragged it off the counter and (luckily) it didn't go point down into my foot, but "only" bounced on the floor and then into my heel. The good: The point didn't break. The bad: It's annoying as gently caress to have a decently big cut on the heel.
|
# ? Apr 27, 2016 17:53 |
|
RapeWhistle posted:Any opinions on the Aircat 800? I'm delving into air tools and my first purchase will be a quiet low torque 1/4" air ratchet for tiny fasteners. No use with that but the HF version is nice. But for a lot of tiny fasteners I like my matco 1\4" electric impact.
|
# ? Apr 28, 2016 00:25 |
|
I just moved into the first place with a garage and basement and finally have the space to start working on my own stuff. I had a flea market tool set until last year that I threw away when I moved leaving me with nothing other than a mix of odd sized or niche tools that used to be my grandfathers, a beam style torque wrench, a small ratchet set, and a crappy corded drill. Can you guys recommend a good starter mechanics tool set and tool box manufacturer? I have up to $500 to spend all together. Also, is there any non standard tools I should have? I'm planning on buying an electric impact driver and a strap wrench for oil changes, but beyond that I don't know what I don't know as far as useful tools to have around.
|
# ? Apr 28, 2016 01:46 |
|
Get a decent multimeter. Doesn't have to be a Fluke, plenty of good ones under $50 on Amazon. Normally I like HF but Harbor Freight is a bad option for this.
|
# ? Apr 28, 2016 02:07 |
|
If you can plop down a little more coin, AVE posted something interesting. https://www.youtube.com/watch?v=XDm5BfRrAsg Personally I sharked all the local craiglists hard for about 3 months and got my self a fluke 87 on the super cheap. For tool sets, Id recommend something from Husky or Kobalt in the "Mechanics Tool Set" variety. They are reasonable quality, lifetime warranty and right now they will probably be around longer than sears. http://www.lowes.com/pd_573344-22328-86756_0__?productId=50200795 For tool boxes, harbor freight. I love mine. Very well built for the money. http://www.harborfreight.com/tool-storage/tool-chests-roller-cabinets/44-in-13-drawer-glossy-red-industrial-roller-cabinet-68784.html Sadi fucked around with this message at 02:44 on Apr 28, 2016 |
# ? Apr 28, 2016 02:40 |
|
-Zydeco- posted:I just moved into the first place with a garage and basement and finally have the space to start working on my own stuff. I had a flea market tool set until last year that I threw away when I moved leaving me with nothing other than a mix of odd sized or niche tools that used to be my grandfathers, a beam style torque wrench, a small ratchet set, and a crappy corded drill. Can you guys recommend a good starter mechanics tool set and tool box manufacturer? I have up to $500 to spend all together. Check out Costco, they usually have a nice big starter tool set for around $100. Like this: http://www.costco.com/Kirkland-Signature%E2%84%A2-159-piece-Mechanics-Tool-Set.product.100145342.html I've seen that set go on sale for $79 every now and then so you might wait if you like to get a good deal. I'd say buy more specialized tools as you need them. For oil filters sometimes strap wrenches don't work well if your filter is in a really tight spot or if it's a cartridge style filter. Really depends on your car and where your filter is located what kind of tool you want. If you're changing oil yourself then you also don't need to go insane tightening down the filter. Really just a bit past a snug hand tight is good enough. mod sassinator fucked around with this message at 02:45 on Apr 28, 2016 |
# ? Apr 28, 2016 02:41 |
|
Honestly, as long as you're not measuring current through it, the harbor freight multimeter will be perfectly fine for most household uses. I get the ones free with coupon and leave them in my car. Work fine to test battery voltage, and whether an alternator is putting out proper voltage, checking continuity, as well as basic circuit troubleshooting around the house. Edit: I do have a decent multimeter that I use for electronics stuff, but the cheap HF meters have their place.
|
# ? Apr 28, 2016 02:42 |
|
Oh this might be old news but I was in a Harbor Freight over the weekend and noticed they have a big 1/2" size version of their extendable ratchet: http://www.harborfreight.com/12-in-drive-extendable-ratchet-62311.html I love the 3/8" & 1/4" version of this ratchet so to see a 1/2" version is great. It extends out to a pretty large size too--easily as long as most breaker bars. I don't think it would survive the kind of punishment a breaker bar can take, but for getting stuff off that's just a bit too tight I bet it would work great. Definitely going to pick one up in the near future.
|
# ? Apr 28, 2016 02:44 |
|
I had one of these dudes and it's been pretty cool: http://www.harborfreight.com/12-in-drive-18-in-ratcheting-breaker-bar-67957.html The ratchet did flake out after about two years or so but it got me through a number of suspension jobs and I felt like I got my money's worth out of it. Hit it with a hammer on a regular basis and it held up.
|
# ? Apr 28, 2016 02:50 |
|
mod sassinator posted:Oh this might be old news but I was in a Harbor Freight over the weekend and noticed they have a big 1/2" size version of their extendable ratchet: http://www.harborfreight.com/12-in-drive-extendable-ratchet-62311.html I love the 3/8" & 1/4" version of this ratchet so to see a 1/2" version is great. It extends out to a pretty large size too--easily as long as most breaker bars. I don't think it would survive the kind of punishment a breaker bar can take, but for getting stuff off that's just a bit too tight I bet it would work great. Definitely going to pick one up in the near future. My wife bought me that exact ratchet a month or two ago and I love it. I hand from it and it just keeps on trucking. It brakes any and all bolts free of there rusty he'll.
|
# ? Apr 28, 2016 03:01 |
|
I don't think mine is Craftsman, but it's this same style. Works extremely well: Holy extremely long URL, Batman!
|
# ? Apr 28, 2016 03:30 |
|
Whelp kind of blew up the budget at $850 but whatever, I have tools. Good thing its warm out now so I can ride my motorcycles while I save up for the parts I was supposed to be spending my money on.
|
# ? Apr 28, 2016 05:06 |
|
mod sassinator posted:Check out Costco, they usually have a nice big starter tool set for around $100. Like this: http://www.costco.com/Kirkland-Signature%E2%84%A2-159-piece-Mechanics-Tool-Set.product.100145342.html I've seen that set go on sale for $79 every now and then so you might wait if you like to get a good deal. That's a great starter kit - I bought one on sale to keep in the Jeep, so I don't have to pack/unpack a million sockets every time I go offroading. It's nice quality, I've been finding myself pulling it out and using it instead of my misc. yardsale + HF stuff. A lot of the sockets are 6pt which I like and the molded case is really solid - everything snaps in firmly and doesn't come loose in the back on bad roads. The service tech who comes out for our golf carts at work uses it and says it's really holding up well to abuse and battery acid.
|
# ? Apr 28, 2016 05:11 |
|
n0tqu1tesane posted:Honestly, as long as you're not measuring current through it, the harbor freight multimeter will be perfectly fine for most household uses. I get the ones free with coupon and leave them in my car. Work fine to test battery voltage, and whether an alternator is putting out proper voltage, checking continuity, as well as basic circuit troubleshooting around the house. Isn't the problem with the super cheap multimeters more that they catch fire and explode if you eg. accidentally try to measure voltage while it's set to ohms?
|
# ? Apr 28, 2016 05:12 |
|
n0tqu1tesane posted:Honestly, as long as you're not measuring current through it, the harbor freight multimeter will be perfectly fine for most household uses. I get the ones free with coupon and leave them in my car. Work fine to test battery voltage, and whether an alternator is putting out proper voltage, checking continuity, as well as basic circuit troubleshooting around the house. Normally I'm a big HF proponent in the tool threads because there's a lot to love for cheap, but I've gotten at least 8 bad multimeters so far. They go bad in subtle ways sometimes, where you don't necessarily figure it out until you can compare vs a couple other meters. Seems like usually they gradually drift to as far as 2v off up or down, but one slagged itself (measuring DC volts in a 10a fused circuit and not set for ohms) and a couple were just DOA. One had a bad continuity buzzer but only intermittently. None of them ever stay turned off in a toolbox or bag because the On/Off switch is a lovely sensitive pushbutton that sticks out from the front, so usually when you need it it's dead. Most people remove the battery after every use, which is functional I guess but it's a waste of loving time when a good reliable one can be had for on Amazon. Splizwarf fucked around with this message at 06:24 on Apr 28, 2016 |
# ? Apr 28, 2016 06:22 |
SouthsideSaint posted:No use with that but the HF version is nice. But for a lot of tiny fasteners I like my matco 1\4" electric impact. Yeah, lithium-powered impact drivers poo poo all over air ratchets nowadays. I have a right angle Hitachi that vibrates just right.
|
|
# ? Apr 28, 2016 06:26 |
|
Guys we've had multimeter chat in this thread at least a few times, I understand there's a lot of pages to search through but c'mon here's a link to one of my posts the last time we had meterchat tl;dr don't buy cheap meters, you may die That cheap chinese Fluke looks like a drat good call, though. click here for the 15b and click here for the 17b - i'm not super clear on the differences but it seems mostly like the 17 has the peak and hold / relative measurement stuff which is neat but probably not worth the extra $. Gearbest don't have the fastest shipping in the world (ranges from 3 days to 3+ weeks because ePacket - here's a touchy-feely-waaaaah-muh-american-jobs article about how cheap shipping from china works) but they are a legitimate site and have really good customer support (if not super fast). Plus they take PayPal so even if the thing doesn't show up you're good. E: EKDS5k posted:Isn't the problem with the super cheap multimeters more that they catch fire and explode if you eg. accidentally try to measure voltage while it's set to ohms? Yup. https://www.youtube.com/watch?v=OEoazQ1zuUM&t=364s Also, SharkyTM's link to this video in this post contains a lot of good info: Part of the reason these good multimeters cost so much (even the cheap chinese fluke isn't pocket change) is because the high-rupture-current fuse inside the thing (aka the piece of ceramics and metal that stops you from dying horribly) alone costs $20-25. literally a fish fucked around with this message at 12:39 on Apr 28, 2016 |
# ? Apr 28, 2016 12:35 |
|
mod sassinator posted:Oh this might be old news but I was in a Harbor Freight over the weekend and noticed they have a big 1/2" size version of their extendable ratchet: http://www.harborfreight.com/12-in-drive-extendable-ratchet-62311.html I love the 3/8" & 1/4" version of this ratchet so to see a 1/2" version is great. It extends out to a pretty large size too--easily as long as most breaker bars. I don't think it would survive the kind of punishment a breaker bar can take, but for getting stuff off that's just a bit too tight I bet it would work great. Definitely going to pick one up in the near future. I have this. I broke half the plastic handle off (the back half is just hollow plastic, no metal in it...) but still use it regularly. I will return it for a new one when I remember. Worth buying IMO, even with the lovely handle.
|
# ? Apr 28, 2016 15:38 |
|
kastein posted:I have this. I broke half the plastic handle off (the back half is just hollow plastic, no metal in it...) but still use it regularly. I will return it for a new one when I remember. Worth buying IMO, even with the lovely handle. It's on sale through Saturday, too (possibly regional?) YMMV but
|
# ? Apr 29, 2016 00:30 |
|
I have one of those for 7-8 years now and have put it through all kinds of abuse without issue. It's perfect for a junkyard toolbox because you don't have to bring a breaker bar.
|
# ? Apr 29, 2016 00:46 |
|
I've been using that HF extendable ratchet for a while now. I thought it was just a gimmick - but I don't know how many times I've used it to loosen caliper bracket bolts, and extended it for extra leverage.
|
# ? Apr 29, 2016 02:00 |
|
QuarkMartial posted:I don't think mine is Craftsman, but it's this same style. Works extremely well: Holy extremely long URL, Batman! The thing about long urls is that usually they are a short url in disguise: http://www.sears.com/f/p-02820523000P I have the Sears one (made in USA, lifetime warranty) and it has certainly gotten me out of several jams when the strap wrench was just not cutting it.
|
# ? Apr 29, 2016 02:25 |
|
|
# ? Jun 5, 2024 04:59 |
|
1/2" extendable ratchet is $11.99 with coupon code 12325378, expires Sunday. They can enter the code at the register. I discovered today that a lady at my local HF remembers my address and knows me as "Whiskers".
|
# ? Apr 30, 2016 04:12 |