|
atomicthumbs posted:do you people not keep your computer inside a dessicated box or what Makes it too hard to pour in the liquid nitrogen.
|
# ? Sep 2, 2016 22:11 |
|
|
# ? May 13, 2024 11:43 |
|
Just keep your box dehumidified, duh!
|
# ? Sep 2, 2016 23:52 |
|
PerrineClostermann posted:Just keep your box dehumidified, duh! So should the airflow order be dehumidifier -> case -> chiller or chiller -> dehumidifier -> case
|
# ? Sep 3, 2016 02:08 |
|
Deuce posted:So should the airflow order be dehumidifier -> case -> chiller or chiller -> dehumidifier -> case I'm currently building a setup where my motherboard is in the HVAC supply duct in the wall and I alternate between AC and furnace+humidifier combo, so as to take advantage of an evaporative cooling effect
|
# ? Sep 3, 2016 02:13 |
|
Just a heads up for people wanting to do custom loops, you can spend a ton of cash on fittings. I didn't really plan my tubing very well when I did my first hard tubed acrylic build and probably spent over 200 bucks on fittings. I had a lot of components but still even with the bare minimum it adds up.
|
# ? Sep 3, 2016 02:22 |
|
Kaleidoscopic Gaze posted:I'm currently building a setup where my motherboard is in the HVAC supply duct in the wall and I alternate between AC and furnace+humidifier combo, so as to take advantage of an evaporative cooling effect Hot new trend from Corsair, Thermaltake, and Inwin: The DuctCase! Attach your PC to your central or underfloor HVAC! Just remove in wintertime!
|
# ? Sep 3, 2016 02:24 |
|
A combination of immersion cooling and phase-change cooling: Your motherboard is mounted in a pressure vessel, and you have your central AC condenser funneling liquid freon into the chamber, where hot components cause it to evaporate. How do I check how many atmospheres of pressure my components are rated for?
|
# ? Sep 3, 2016 02:50 |
|
Kaleidoscopic Gaze posted:A combination of immersion cooling and phase-change cooling: Your motherboard is mounted in a pressure vessel, and you have your central AC condenser funneling liquid freon into the chamber, where hot components cause it to evaporate. To cool off the increased heat load to your main AC condenser there is this sophisticated heatsink with large copper heat pipes and an array of 20 120mm fans to give you top performance. If you seek extreme performance it can be further upgraded with a full blown 5 ton 20 seer AC unit to cool off the other AC unit circulating freon inside the pressure vessel.
|
# ? Sep 3, 2016 03:27 |
|
Kaleidoscopic Gaze posted:A combination of immersion cooling and phase-change cooling: Your motherboard is mounted in a pressure vessel, and you have your central AC condenser funneling liquid freon into the chamber, where hot components cause it to evaporate. http://www.electronics-cooling.com/2005/11/advances-in-high-performance-cooling-for-electronics/
|
# ? Sep 3, 2016 03:49 |
|
atomicthumbs posted:http://www.electronics-cooling.com/2005/11/advances-in-high-performance-cooling-for-electronics/ ...That's a lot of cooling.
|
# ? Sep 3, 2016 04:30 |
|
atomicthumbs posted:http://www.electronics-cooling.com/2005/11/advances-in-high-performance-cooling-for-electronics/ Back in the day I had an 80W peltier cooler connected to a dangerden water block and radiator. Kept my CPU at a nice and cool 60 deg F all day long. Went the full monty with vaseline in the CPU connector and silicone sealant around the whole setup - custom water reservoir made from home depot components and brass barbs. Good stuff! It was a fun ride but I went back to air cooling eventually.
|
# ? Sep 3, 2016 08:06 |
|
Numinous posted:Back in the day I had an 80W peltier cooler connected to a dangerden water block and radiator. Kept my CPU at a nice and cool 60 deg F all day long. Went the full monty with vaseline in the CPU connector and silicone sealant around the whole setup - custom water reservoir made from home depot components and brass barbs. Good stuff! Subambient is loving awesome even if it's a headache. Did you take any pictures?
|
# ? Sep 3, 2016 08:21 |
|
I don't. This was back in the day where I think I maybe had a 640x480 digital camera and definitely not a cell phone. It was a cool build too - ran dual power supplies so I could turn on the peltier and water pump before booting the system. Had wired up a 'slam style' kill switch in the event that the peltier power supply died because I would only have like 60 seconds before I fried the CPU (way before internal temp monitors would throttle back power).
|
# ? Sep 3, 2016 08:30 |
|
Put back together. Man now I wanna do another one.
|
# ? Sep 4, 2016 04:27 |
|
Numinous posted:I don't. This was back in the day where I think I maybe had a 640x480 digital camera and definitely not a cell phone. a relay with a buzzer or something would've been just as cool. you could even get a delayed timing relay for effect!
|
# ? Sep 4, 2016 20:08 |
|
Numinous posted:Back in the day I had an 80W peltier cooler connected to a dangerden water block and radiator. Kept my CPU at a nice and cool 60 deg F all day long. Went the full monty with vaseline in the CPU connector and silicone sealant around the whole setup - custom water reservoir made from home depot components and brass barbs. Good stuff! Same, but it was a watercooled peltier block for my gpu. Kept it around -1C at idle, and around 2 or so at load. That first bump was me reversing the polarity of the peltier accidentally, I switched it, and you can see the results
|
# ? Sep 6, 2016 04:19 |
|
Peltiers seem scary/unproductive in the end, though. They generate heat right in the same spot.
|
# ? Sep 6, 2016 06:08 |
|
My main problem with peltiers is the potential condensation. Otherwise I'd probably be running one just for the "why not" factor. (I have way too much rad volume for my TDP)
|
# ? Sep 6, 2016 06:11 |
|
Oh man this thread brings me back. I spent summer after freshman year of high school trying to watercool my first PC, a 1.2Ghz AMD TBird. I'll never forget: - Attempting to make a waterblock with junkyard copper, old wire, a dremel, JBWeld, and a soldering iron. Luckily the thing fell apart while lapping the base, would have been a timebomb. - Attempting to make a giant evaporative cooler and trying to assure my parents that the humidity wouldn't rot my room from the inside-out - The guy at Napa Auto Parts who was so incredibly down to help a strange child identify dimensionally-appropriate heater cores - Learning that silicone tubing is water vapor permeable, trying to figure out why my water level kept dropping and why the pump would pull air after 3 months - Slicing the gently caress out of my hands with a box cutter while building a reservoir out of junk to fix the above problem, starting my DIY scar collection - Like so many future projects, doing a mediocre job and quitting at 90% You kids today don't know how lucky you gots it, with your AIO's and your off-the-shelf phase change.
|
# ? Sep 8, 2016 07:04 |
|
Vapochill feels like it's been around for ages. Or was around for ages. I don't even know if they're still around.
|
# ? Sep 8, 2016 07:40 |
|
Something really fun about a water cooling set up, even without all the benefits its just a cool thing to play around with Just doing a strip down and clean on mine now, with some shiny new fittings and tubing arriving today Can't wait
|
# ? Sep 8, 2016 09:35 |
|
Reading this thread while on vacation in South East Asia makes me have crazy ideas on water cooling my hot rear end bedroom at my grandma's until I remember LinusTechTips did it and it was an absolute disaster.
|
# ? Sep 8, 2016 11:26 |
|
Mofabio posted:Oh man this thread brings me back. I spent summer after freshman year of high school trying to watercool my first PC, a 1.2Ghz AMD TBird. I'll never forget: We had off the shelf phase change back then. Kryotech homie Fragrag posted:Reading this thread while on vacation in South East Asia makes me have crazy ideas on water cooling my hot rear end bedroom at my grandma's until I remember LinusTechTips did it and it was an absolute disaster. Build a swamp cooler
|
# ? Sep 8, 2016 16:16 |
|
Fragrag posted:Reading this thread while on vacation in South East Asia makes me have crazy ideas on water cooling my hot rear end bedroom at my grandma's until I remember LinusTechTips did it and it was an absolute disaster. I wouldn't hold anything linus does as an actual representation of the thing in question.
|
# ? Sep 8, 2016 16:26 |
|
Fragrag posted:Reading this thread while on vacation in South East Asia makes me have crazy ideas on water cooling my hot rear end bedroom at my grandma's until I remember LinusTechTips did it and it was an absolute disaster. Don't see why not. I live in SEA and summers here hit 34~5c at 90% humidity and I watercooled just fine without an aircon. In the end, watercooling just keeps the delta between ambient and max temps lower. Unless you meant trying to actually cool your bedroom with water?
|
# ? Sep 8, 2016 16:36 |
|
Shrimp or Shrimps posted:Don't see why not. I live in SEA and summers here hit 34~5c at 90% humidity and I watercooled just fine without an aircon. In the end, watercooling just keeps the delta between ambient and max temps lower. https://www.youtube.com/watch?v=b8bLtg9J1Oc
|
# ? Sep 8, 2016 18:09 |
|
Alereon posted:Linus was using a bedroom as an office that was full of a bunch of high-end computers that heated the room up very badly. The idea was to make a massive shared watercooling system that would pump the heat from all of the systems into a radiator outside the house, keeping the room and thus the people and computers inside cooler. It turns out that it basically didn't work for poo poo. It was way more work than expected, there were leaks, and most of the heat was lost in the pipes before it got outside anyway so the room was still hot and cooling still sucked. And then after it was all done they got evicted and had to tear it down to move! Here's the start of the saga: LinusDrillTips is great for comedy. They used copper piping for the whole thing. If you remember, copper is an excellent material for transferring heat.
|
# ? Sep 8, 2016 19:20 |
|
PerrineClostermann posted:LinusDrillTips is great for comedy. They used copper piping for the whole thing. The entire time I watched the saga I wondered why they either didn't pick another type of piping (probably price or "well it's what I've used in pc's before") or at least loving insulate the pipes
|
# ? Sep 8, 2016 19:37 |
|
PerrineClostermann posted:LinusDrillTips is great for comedy. They used copper piping for the whole thing. Well, a big part of LTT's whole thing is "can you do this?" To which the answer very often is "technically yes, but you shouldn't." This particular example ended up as "not really." Insulated pipes would have kinda worked. A much better option was obviously "put an air conditioner in the window, jackass," but that wasn't really the point. Like bong coolers and LN2, sometimes you just gotta do poo poo for the sake of doing poo poo. They did make me aware that this is a thing and now I totally want to do this: https://www.youtube.com/watch?v=E5d7ynJXiZc&t=273s
|
# ? Sep 8, 2016 19:43 |
|
Deuce posted:Well, a big part of LTT's whole thing is "can you do this?" To which the answer very often is "technically yes, but you shouldn't." This particular example ended up as "not really." They put that same approach to hardware/software solutions that are vital to their business, though. Look at their dumb saga with their server. That raid setup was the dumbest. https://www.youtube.com/watch?v=gSrnXgAmK8k
|
# ? Sep 8, 2016 19:51 |
|
Idiot should have rented a backhoe and done this: http://www.overclock.net/t/671177/12-feet-under-1000-square-feet-of-geothermal-pc-cooling
|
# ? Sep 8, 2016 20:27 |
|
PerrineClostermann posted:They put that same approach to hardware/software solutions that are vital to their business, though. Look at their dumb saga with their server. That raid setup was the dumbest. Well, yeah. Bunch of geeks who do crazy homebuilt custom stuff that sometimes goes terribly wrong make crazy homebuilt custom backup server that goes terribly wrong. I bet they have a professional offsite backup now.
|
# ? Sep 8, 2016 20:32 |
|
Nostrum posted:Idiot should have rented a backhoe and done this: And here everyone tells me I'm crazy spending 30 grand on a 5 ton ground-source geothermal heat pump solely for cooling my pc.
|
# ? Sep 9, 2016 00:47 |
|
I saw the Linus water cooled room thing and another streamer who ran his radiator down to the basement, but it got me thinking. Why not just put the computers in a basement and then run thunderbolt and whatever else I/O you need up to the room you need it in? That way you pretty much just have monitors and hubs in your work space, and you can run the cheapest, loudest air cooling you want.
|
# ? Sep 9, 2016 19:08 |
|
VulgarandStupid posted:I saw the Linus water cooled room thing and another streamer who ran his radiator down to the basement, but it got me thinking. Why not just put the computers in a basement and then run thunderbolt and whatever else I/O you need up to the room you need it in? That way you pretty much just have monitors and hubs in your work space, and you can run the cheapest, loudest air cooling you want. This is definitely a thing people do (when they have money to have nice solutions). Monoprice and other retailers have what you need to run poo poo like USB and HDMI and DP through walls, so you could stick your PC in a room that's kept at a low temp, and only have accessories and screens and whatnot at your desk.
|
# ? Sep 9, 2016 21:09 |
|
VulgarandStupid posted:I saw the Linus water cooled room thing and another streamer who ran his radiator down to the basement, but it got me thinking. Why not just put the computers in a basement and then run thunderbolt and whatever else I/O you need up to the room you need it in? That way you pretty much just have monitors and hubs in your work space, and you can run the cheapest, loudest air cooling you want. It's what Linus does now, he's got a computer closet with his rigs in a ... closet, and then runs a thunderbolt through the wall. Seems to work ok. Truga fucked around with this message at 22:13 on Sep 9, 2016 |
# ? Sep 9, 2016 21:27 |
|
VulgarandStupid posted:I saw the Linus water cooled room thing and another streamer who ran his radiator down to the basement, but it got me thinking. Why not just put the computers in a basement and then run thunderbolt and whatever else I/O you need up to the room you need it in? That way you pretty much just have monitors and hubs in your work space, and you can run the cheapest, loudest air cooling you want. He ended up doing that at his actual house, I think. Rack of poo poo in a closet and thunderbolt out to the desks. I'm torn on it myself - I don't want to hear my system running, but if I did water cooling I'd absolutely want to be able to see it - not just to show it off, but to watch for leaks or other signs of problems. I can't be too hard on him for the storage meltdown - he hosed up originally, realized it was a problem, built a proper server to copy it to - and was mid-replication to a properly configured system when it failed on him. No wait, I can be. "moved a server before it was completely backed up" and the ever-hilarious "installed a critical server in a construction site WITHOUT A UPS" are perfectly great reasons to point and laugh. Of all the thread-relevant things he's done, I think my favorite was A) build an oil-immersion fishtank PC and then B) move it cross-town in a moving van without draining most of the oil into a drum. It developed fractures and they had to drain and repair it. E: Anyone seen the laminar flow hobbists? They use a water jet as a lightguide and it looks pretty good. Wondering if the water/plastic boundary could pull it off as well as water/air does. Obviously it can't go through any blocks, but you could do your two long-runs that way and have the actual tubes be glowing with full RGB control. Harik fucked around with this message at 21:52 on Sep 9, 2016 |
# ? Sep 9, 2016 21:49 |
|
Harik posted:He ended up doing that at his actual house, I think. Rack of poo poo in a closet and thunderbolt out to the desks. I'm torn on it myself - I don't want to hear my system running, but if I did water cooling I'd absolutely want to be able to see it - not just to show it off, but to watch for leaks or other signs of problems. Watercooling can be practically silent. Run lots of rad space and very slow fans. I run a 480 and a 360 rad for an 980ti and an i7-4790k. Fans run at 300rpm during regular things. bumps to 700 or so during gaming.
|
# ? Sep 9, 2016 21:52 |
|
Harik posted:He ended up doing that at his actual house, I think. Rack of poo poo in a closet and thunderbolt out to the desks. I'm torn on it myself - I don't want to hear my system running, but if I did water cooling I'd absolutely want to be able to see it - not just to show it off, but to watch for leaks or other signs of problems. So just don't do water cooling if you're gonna put it in another room. Once you do that, size and sound levels are no longer a concern, so run air because it's cheaper and probably more reliable.
|
# ? Sep 9, 2016 22:04 |
|
|
# ? May 13, 2024 11:43 |
|
Now I really want to build a system in a mini split-system AC condenser chassis, mount it on a balcony outside a window, and have all the wires running through the copper tubing. Replace relay with PSU, keep original 500 cfm fan.
|
# ? Sep 9, 2016 22:13 |