|
They are circumventing China manufacturing issues by not manufacturing in China (or doing assembly in the us at least). Looks like they've solved their biggest technical hurdles (power supply issues). I think anyone can look at the posts on their community forum if you want. No idea how the software is going along. http://community.glowforge.com/t/glowforge-update-betas-maker-faire-production/2823 moron izzard fucked around with this message at 20:42 on Sep 10, 2016 |
# ? Sep 10, 2016 17:50 |
|
|
# ? May 9, 2024 00:49 |
|
so i learned about this recently http://wazer.com/ gonna be on kickstarter on 9/12 ++; i like: the idea of a cnc waterjet that doesn't cost $250,000 i don't like: the idea of a cnc waterjet using a 50,000 psi turbopump built by the cheapest chinese contract manufacturer
|
# ? Sep 10, 2016 17:51 |
|
A Yolo Wizard posted:They are circumventing China manufacturing issues by not manufacturing in China (or doing assembly in the us at least). Looks like they've solved their biggest technical hurdles (power supply issues). I think anyone can look at the posts on their community forum if you want. No idea how the software is going along. That's cool, thanks.
|
# ? Sep 10, 2016 18:04 |
|
Mister Sinewave posted:Holy poo poo that fidget thing, wish I'd have thought of it and truer words will not be spoken by me probably all day. i feel the same way about pet rocks
|
# ? Sep 11, 2016 00:37 |
|
Honestly about a decade ago I went to the electronics store, picked up a small plastic enclosure and several switches that had nice feels to them and just made a lil box with all these nice fiddly bits. If you told me that was a multi million dollar idea I would have laughed at you. edit: lmao $2.8 mil. https://ksr-video.imgix.net/projects/2589968/video-700472-h264_high.mp4 I didnt actually watch the video before but lmao at 2minutes on. Synthbuttrange fucked around with this message at 05:10 on Sep 11, 2016 |
# ? Sep 11, 2016 05:08 |
|
SynthOrange posted:Honestly about a decade ago I went to the electronics store, picked up a small plastic enclosure and several switches that had nice feels to them and just made a lil box with all these nice fiddly bits. fidget discreetly, my lord
|
# ? Sep 11, 2016 05:15 |
|
poo poo 2.8mil and the campaign has barely started; goal at 15k. Unless it was all a masterminded thing they have a shitload of problems to solve that they never thought they would have to solve to fulfill 2.8mil of orders versus even just a hundred thou $ worth.
|
# ? Sep 11, 2016 17:14 |
|
I sure hope they worked out their costing really well and have included a healthy profit in that price. imagine getting $2.8 million worth of orders and it's all break-even
|
# ? Sep 11, 2016 17:22 |
|
A guy I know did a reasonably successful kickstarter for a plastic widget and in the end it broke pretty even, fulfillment was what ate up the margin. Could be worse, could find out you could have just handed out 5$ bills for an afternoon and ended up the same financially. Our would have ended with MORE money in the end had you just played xbox instead of making and selling a thingie.
|
# ? Sep 11, 2016 19:35 |
|
the usual figure thrown around is that you need to sell for ~2.5x your BOM cost to break even once you factor in all the manufacturing costs. and i dont think that accounts for shipping costs to customers
|
# ? Sep 11, 2016 20:00 |
|
I can't wait to buy the 90% as good version from aliexpress for a quarter of the price in a couple months tho
|
# ? Sep 11, 2016 21:21 |
|
why doesn't it at least harvest the kinetic energy to trickle-charge a battery or something
|
# ? Sep 11, 2016 21:33 |
|
duTrieux. posted:why doesn't it at least harvest the kinetic energy to trickle-charge a battery or something wait, are you complaining that a Kickstarter project doesn't have enough useless features?
|
# ? Sep 11, 2016 21:34 |
|
yes
|
# ? Sep 11, 2016 21:35 |
|
duTrieux. posted:why doesn't it at least harvest the kinetic energy to trickle-charge a battery or something with enough energy they could gamify the thing and have the cube post achievements ("100000 actuations" etc) to your fidget account
|
# ? Sep 11, 2016 22:36 |
|
unpacked robinhood posted:with enough energy they could gamify the thing and have the cube post achievements ("100000 actuations" etc) to your fidget account
|
# ? Sep 11, 2016 23:48 |
|
unpacked robinhood posted:with enough energy they could gamify the thing and have the cube post achievements ("100000 actuations" etc) to your fidget account So who wants to kickstart a physiotherapy business for when everyone gets crippling rsi?
|
# ? Sep 12, 2016 04:10 |
|
https://www.kickstarter.com/projects/1294137530/the-first-desktop-waterjet-cutter we'll see
|
# ? Sep 12, 2016 18:38 |
|
Seems neat if it works.
|
# ? Sep 14, 2016 06:50 |
|
The WAZER actually seems reasonable. A professional machine at 60k psi will do 1" thick 2024 Aluminum at about 19ipm, the wazer will do 1/16" at 2.8ipm. With the massive cost difference, they're probably using a substantially lower power pump, but even for the list of materials that don't really get that thick, the speeds it cuts are believably low enough for a home unit and for some thing, much easier than by hand and possibly more convenient than a laser cutter. Looks like the money is going to manufacturing costs for bulk parts ordering and development of waterjet-specific software, and they seem to have working prototypes and most development done. Some cost cutting measures done and no divulging of the water pressure, but it actually seems doable to the extent they are almost completely sold out of the very limited machines. Not even the thing of more questionable projects where they have a virtually unlimited number of machines at some price points, they actually seem fairly legitimate.
|
# ? Sep 14, 2016 19:47 |
|
there was a waterjet guy posting on hack-a-day who ran the numbers and figures they're using a 5000psi pressure-washer pump. the abrasive usage is linear with time and water flow, not pressure, so cutting that steel sprocket they use as an example (takes about 55 minutes they said) would use something like 30 pounds of garnet sand, and that's not reusable. essentially it's trading out the 60,000 psi intensifier pump for slow erosion and vastly increased abrasive usage. there are also a bunch of unrealistic or mistaken values in their specs for tolerance and maintenance life too apparently.
|
# ? Sep 14, 2016 20:50 |
|
prefect posted:i have the add pretty bad, and i'm terribly fidgety. would love something that i could fidget with but that wouldn't make any coworker-detectable noise i bite my nails but thats a nervous habit, not really a fidgety thing
|
# ? Sep 14, 2016 20:54 |
.
|
|
# ? Sep 14, 2016 21:01 |
|
Sagebrush posted:there was a waterjet guy posting on hack-a-day who ran the numbers and figures they're using a 5000psi pressure-washer pump. the abrasive usage is linear with time and water flow, not pressure, so cutting that steel sprocket they use as an example (takes about 55 minutes they said) would use something like 30 pounds of garnet sand, and that's not reusable. Thanks, I missed that post. That pump would make sense why it runs on average home power and has fairly poor cutting performance, it's basically being a wet grinder with horrible abrasive consumption and completely flow through water as opposed to filtering. I figured some of their values had to be optimistic given some of their cost cutting measures and having to build it to a price, but at that cost it probably would be easier to either sacrifice an old pressure washer or just snag a laser cutter, since having to vent it seems like a good tradeoff for a machine that won't suck down consumables at an insane rate and doesn't function as a fancy wet grinder.
|
# ? Sep 14, 2016 23:21 |
|
Theres a lot of materials you can't cut in a laser cutter tbh, and especially not in an entry level one. I'm gonna have to get one of those cheapo cncs so I can cut the smaller carbon fiber and g10 stuff I wanna do soon.
|
# ? Sep 15, 2016 00:19 |
|
Yeah I didnt see how much it used up in consumables, jesus. And most shots just show the top unit, not picturing the huge pump unit at the bottom.
|
# ? Sep 15, 2016 00:39 |
|
Sagebrush posted:there was a waterjet guy posting on hack-a-day who ran the numbers and figures they're using a 5000psi pressure-washer pump. the abrasive usage is linear with time and water flow, not pressure, so cutting that steel sprocket they use as an example (takes about 55 minutes they said) would use something like 30 pounds of garnet sand, and that's not reusable. 80 mesh garnet is $200/metric ton, so not bad?
|
# ? Sep 15, 2016 02:40 |
|
i suppose yeah if you're going to buy it by the metric ton and also if you have a place to store a metric ton of garnet dust
|
# ? Sep 15, 2016 05:14 |
|
that's what? a 20x20 5ft high pile?
|
# ? Sep 15, 2016 05:18 |
|
my wife was one of the first people to order a glowforge laser cutter thing and right now they're aiming for late 2017 for shipping the first pre-pro units lol
|
# ? Sep 15, 2016 07:21 |
|
theflyingexecutive posted:that's what? a 20x20 5ft high pile?
|
# ? Sep 15, 2016 07:39 |
|
the solution i p obvs here people you put your watercutter in the basement, and the room above it is full of this sand stuff and you just have a pipe going down
|
# ? Sep 15, 2016 07:46 |
|
Nah, it wouldn't take up anywhere near that much space. Think logically: garnet is a mineral, so it weighs more than water. One metric ton of water occupies 1 cubic meter -- a little bigger than a dishwasher. I'm guessing 1000kg of garnet would be about the size of a 55-gallon drum. It wouldn't take up your whole house, but you'd need a forklift to deliver it.
|
# ? Sep 15, 2016 07:49 |
|
Sagebrush posted:Nah, it wouldn't take up anywhere near that much space. Think logically: garnet is a mineral, so it weighs more than water. One metric ton of water occupies 1 cubic meter -- a little bigger than a dishwasher. I'm guessing 1000kg of garnet would be about the size of a 55-gallon drum. yeah, it's pallet sized. I was trying to look up a pic earlier but kept getting loving steven universe fan art
|
# ? Sep 15, 2016 08:36 |
|
theflyingexecutive posted:yeah, it's pallet sized. I was trying to look up a pic earlier but kept getting loving steven universe fan art this is 2200 lbs of garnet dust
|
# ? Sep 15, 2016 08:48 |
|
so with that much you could cut what, 80? of those sprocket things?
|
# ? Sep 15, 2016 08:51 |
|
Beast of Bourbon posted:so with that much you could cut what, 80? of those sprocket things? from their specs, 120 $2 of sand per
|
# ? Sep 15, 2016 09:07 |
|
Beast of Bourbon posted:my wife was one of the first people to order a glowforge laser cutter thing and right now they're aiming for late 2017 for shipping the first pre-pro units lol Holy poo poo, that's disappointing. I remember thinking early on that they seemed to have put some end-to-end planning and thought into this, but goddam.
|
# ? Sep 15, 2016 09:12 |
|
Like, I mean if you got some laser cutting to do it's probably worth it to buy a Chinese one cause you can do a lot of lasering between now and end of 2017 at earliest. Like, just dump it on kijiji or at a hakkerspace or just never touch it again when the glowforge arrives and solves all your problems letting you cut happily in the middle of the kitchen. e: I mean, I just can't fathom the idea of feeling like "I am certain I will need this particular machine in 16 months, so certain of it in fact that I will pay for it right now." The Eyes Have It fucked around with this message at 09:20 on Sep 15, 2016 |
# ? Sep 15, 2016 09:14 |
|
|
# ? May 9, 2024 00:49 |
|
I've thought about it and it's really not up to me to tell what or where someone else places value. I mean, poo poo I'd roll my eyes at someone suggesting I buy a decent handheld router and practice a little now instead of waiting for some smart CNC thing. I guess I just thought they were much further along the 'figuring out how to build our product' road.
|
# ? Sep 15, 2016 16:01 |