|
I bought a couple of close-out no-brand electric screwdrivers that come with a 5v wall wart and a barrel connector and just smooshed a USB socket in instead and ditched the chargers, now I have USB charging screwdrivers!
|
# ? Nov 22, 2016 20:48 |
|
|
# ? Jun 5, 2024 05:50 |
|
Loving my new makita set so far. More powah is more gooder. On the topic of Dremel I bought on the the off brand ones a few years ago and have never had a problem. I did run it hot for a little too long at one point and started to melt something but it hasn't shown any signs that it messed anything up inside. I can't be bothered to go find the post about the guy that was installing lights in his new barn, how is that project coming along?
|
# ? Nov 22, 2016 22:36 |
|
I bought the Harbor freight dremel, then cracked it open and soldered over the traces on the PCB leading to/from the speed pot and mosfet, as those are usually what burn out first. I've abused the poo poo out if it since. No problems.
|
# ? Nov 22, 2016 22:47 |
Tony Doughnuts posted:I can't be bothered to go find the post about the guy that was installing lights in his new barn, how is that project coming along? Oh hey, that's me, and the lights are baller af, especially when you go down there well after sunset, a short walk through the dark, and you hit the lights and it's all BAMMMMMMMMM. I was waiting to finish out the last row on each end, the rows closest to the end walls, since I needed to leave those bays open for stairs at one and and a garage door at the other. Got sort of used to it just being ever so marginally dimmer at each end for the longest time. The other night, I slapped up one of the rows and jeebus h it's so much better, just three little lights can make a huge difference. Also I got the floor all epoxied up, pretty happy with that. Four of the six rows of overhead lights: Also had a garage door put in, it's a Garaga. I got it with a high-lift kit so instead of going across the lower ceiling and covering my lights and shortening my 9.5' headspace, it goes right up into the attic which is extremely awesome! Last but not least, it's about a 100' walk from my back door to the barn, and I was finding that roughly 90% of the time, I would forget my keys. Problem solved with a cipher lock, extremely pleased with this decision. Now I just need to finish studding out the walls and get some insulation in there because holy moly it's getting cold fast.
|
|
# ? Nov 23, 2016 00:01 |
|
I want to buy a drill/driver combo during the Black Friday sales. Dewalt, Milwaukee, Ridgid and Makita all have 18v combos on sale for $150. I'm thinking Dewalt or Makita. Any opinions?
|
# ? Nov 23, 2016 01:28 |
|
TheMadMilkman posted:I want to buy a drill/driver combo during the Black Friday sales. I've been very happy with my 12v Milwaukee set, and have used the 18v versions at work. If I was starting over though, I think I would have gone with the 18v Milwaukee or Makita for that extra bit of power. I originally went with the Milwaukee for the diverse array of tools, but I have since realized I probably won't ever need a 12v cordless PEX crimper, IR camera, or bluetooth radio Also, I think the DeWalt 18v is being discontinued for their new 20v line
|
# ? Nov 23, 2016 01:58 |
|
That looks absolutely awesome dude! Can I come over? What kind of layout are you going to do Floorplan wise? Workbench in the corner? Pegboard, shelves, cabinets? TheMadMilkman posted:I want to buy a drill/driver combo during the Black Friday sales. I just bought the makita set. The brushless is 299 for drill and driver with 2 batteries,charger and a free tool of your choice. Comes in a nice vinyl plastic case too ( can't find any casting marks so I don't know if it's glass fiber reinforced or not) my personal bias is makita > dewalt. Also dewalt has an extremely ugly color scheme. If you're choosing between the two, Makita is my vote. Super Waffle posted:Also, I think the DeWalt 18v is being discontinued for their new 20v line This also true. Truth be told there's not much of a difference in power between the 20v and 18v dewalt. From teardowns I've seen the dewalts are built down to a price. They're not bad by any means but you're not getting any real bang for your buck Tony Doughnuts fucked around with this message at 02:04 on Nov 23, 2016 |
# ? Nov 23, 2016 02:02 |
|
One Legged Ninja posted:It may not be as ubiquitous today as a micro USB, but unless they literally rolled their own plug, a Coaxial power connector is hardly proprietary. Nah, you're absolutely right, and I do have a universal dc charger set with variable voltage adapter, but seriously, in twenty loving sixteen, a 5v lithium charger input doesn't get any more standard than some flavor of USB. I don't want to bust out my calipers to measure the 2.5mm adapter and then search for a comparable charger with the correct gauge positive pin. poo poo just infuriates me to no end, especially as you're guaranteed to lose the charger at some point. Catatron Prime fucked around with this message at 05:16 on Nov 23, 2016 |
# ? Nov 23, 2016 02:04 |
Tony Doughnuts posted:That looks absolutely awesome dude! Can I come over? Sure thing...god forbid you find yourself in central Iowa, hit me up. As for layout, it's up in the air somewhat. Gonna move some stuff in and start setting things in place and working on it from there. There will BE a plan, I'm just not there yet. At the very least, I'm going to try to keep the stuff most in need of heavy dust collection along the same wall as the big DC there for ease of ducting, just up into the attic and along the wall, with drops as needed. I do plan to put French clear panels along pretty much the entire perimeter. Loooooong rear end workbench along one wall or another.
|
|
# ? Nov 23, 2016 02:34 |
|
Tony Doughnuts posted:This also true. Truth be told there's not much of a difference in power between the 20v and 18v dewalt. From teardowns I've seen the dewalts are built down to a price. They're not bad by any means but you're not getting any real bang for your buck There is no difference - the 20V is at no load and the tools actually operate equivalent to 18V. It says as much right on the product packaging and the 20V line is sold explicitly as 18V in Australia where "deceptive" marketing is illegal (or something) That said I don't recall hearing anything about Dewalt straight-up discontinuing the old style of tools, they're even still producing new tools for the old post-style batteries and have an adapter to use the new slot-style batteries in the post-style tools. That said the Dewalt "20V MAX" tools are fantastic and if you can find the deal for a free tool along with the drill + impact combo that's a retarded deal. Grab the cordless sawzall or oscillating tool and it's an awesome deal.
|
# ? Nov 23, 2016 03:54 |
|
TheMadMilkman posted:I want to buy a drill/driver combo during the Black Friday sales. I recommend you try to plan ahead, see what each manufacturer has in their product line and what it contains of cordless tools you'd like to buy down the line. Sharing batteries is a big cost saver and is just the practical thing to do. Of course for corded tools, you shop around in each case to find the best fit. I've been very satisfied with my Makita tools, but each manufacturer you mention makes good products (never handled Rigid myself though).
|
# ? Nov 23, 2016 03:56 |
|
I've had some ridgid cordless tools for a while and have been completely satisfied. I'm not sure if they're really any better or worse than the other big brands.
|
# ? Nov 23, 2016 04:22 |
|
TheMadMilkman posted:I want to buy a drill/driver combo during the Black Friday sales. Ridgid includes a hammer drill, if that's important to you. They also warranty batteries for a lifetime and will apparently replace them when they go bad from what I've read. The Makita set that Home Depot is selling is not currently on their website, which makes me wonder if it's a special Black Friday only SKU. Not sure if that should be concerning or not. The Milwaukee set is already at $150 on their site if you want to buy early and beat the friday crowd.
|
# ? Nov 23, 2016 05:05 |
|
Speaking of black friday, any particularly great tool deals out there? I bought a shop vac from lowes last week, but I haven't found much else that's too exciting yet
|
# ? Nov 23, 2016 05:20 |
|
Went Milwaukee for the 18v and super happy with the circular saw, sawzall, LED lights, and handheld blower I wound up with. Not sure if all those are available with other lines.
|
# ? Nov 23, 2016 05:33 |
|
BeastOfExmoor posted:Ridgid includes a hammer drill, if that's important to you. They also warranty batteries for a lifetime and will apparently replace them when they go bad from what I've read. I did some more digging and it looks like the Makita combo comes with low capacity batteries. I'm no longer considering that one. This is a Christmas present from my dad. I tried to talk him into the $299 deal, but it didn't work. I might put $150 of my own money into it, though. A drill, driver and sawsall covers 95% of my usual cordless needs. I also might drop down to the $99 drill and worry about other things later. I'm going to head to Home Depot tomorrow and at least put my hands on the different options.
|
# ? Nov 23, 2016 06:42 |
|
Makita definitely has a larger selection of tools than dewalt or rigid. Dewalt is focusing more on their 60v line than expanding the 20v line. The DeWalt 18v is becoming harder and harder to find batteries for. They'll probably stop manufacturing them next year. They do make an adapter to use the 20v battery on the 18v tools. Since as was said they're pretty much the same. Rigid is made by the same company as ryobi and Milwaukee so if you're not a fan of either don't get them. They all come out of the same factory with similar parts and designs. Main point is you'll probably be happy with any of them for your usage, I personally just like makita more as I feel they put a little more care into their design and build. The main appeal you're going to see from dewalt is the 60v batteries can be used on the 20v tools and will last a long time on each charge since it's just 3 20v in parallel
|
# ? Nov 23, 2016 06:50 |
|
uwaeve posted:Went Milwaukee for the 18v and super happy with the circular saw, sawzall, LED lights, and handheld blower I wound up with. Not sure if all those are available with other lines. Both Makita and Milwaukee have pretty great selections for random battery tools, like string trimmers and stuff. Generally speaking, I'd say Dewalt is more focused towards basic contractor tools with less overall selection. Just not as big a fan of Milwaukee since it is a wholly Chinese owned and manufactured brand, so there's not the same level of engineering and innovation. TheMadMilkman posted:I did some more digging and it looks like the Makita combo comes with low capacity batteries. I'm no longer considering that one. Keep in mind that 3 amp hours is more than sufficient for pretty much whatever task you're doing, and you likely won't even need the second battery. If you do switch out batteries, they charge so fast, it'll be ready by the time you're done anyways. Half the convenience is the smaller heft and size, and you can always pick up larger batteries if need be, but I doubt you'd run out the smaller ones on most homeowner-esque jobs you'd be doing anyways. Catatron Prime fucked around with this message at 16:05 on Nov 23, 2016 |
# ? Nov 23, 2016 15:56 |
|
If you're not looking for a universe of tools, the dewalts are pretty bombproof, and it seems like 90% of contractors use their drills/drivers. But as said above, they do not have the sheer number of specialty tools that Milwaukee/riobi has.
|
# ? Nov 23, 2016 16:15 |
|
OSU_Matthew posted:Keep in mind that 3 amp hours is more than sufficient for pretty much whatever task you're doing, and you likely won't even need the second battery. If you do switch out batteries, they charge so fast, it'll be ready by the time you're done anyways. I was under the impression that the combo they had on sale came with 1.5 or 2.0 amp batteries. Not sure, though. I'm about to call my dad and then head down and take a look at things. Hopefully I like something that's already on sale, rather than dealing with the Friday morning mess.
|
# ? Nov 23, 2016 16:46 |
|
TheMadMilkman posted:I was under the impression that the combo they had on sale came with 1.5 or 2.0 amp batteries. Not sure, though. They are 3ah batteries, I bought the kit the other day. Been using it on my bathroom remodel, big improvement over my PC kit.
|
# ? Nov 23, 2016 17:19 |
|
Ended up with the Makita $99 drill and a good set of drill bits, which I desperately needed. It ended up being between Makita and Milwaukee, and I can't really say that my choice was rational, but I liked how the Makita felt in my hand a bit better. DeWalt didn't have a demo area set up in the store, but that's fine by me. I've held a grudge against them since they cost me a job as a PC sales rep back in 2004. They announced the buy out the day before I was supposed to be extended a job offer. I'll buy an impact driver as soon as I come across a job that really needs one, or for my birthday in April, whichever comes first.
|
# ? Nov 23, 2016 18:50 |
|
For the money is the Ridgid portable table saw that's on sale at Home Depot, the right choice? I have a super crappy small job site Delta table saw that gets me by for rough cuts, but it's not very precise and is frankly just a pain to work with. I don't have dedicated work space, so a cabinet saw or something of that nature is a no go, so something that is built on a stand is quite appealing. Should I jump on this while it's on sale, or hold out for something else? http://www.homedepot.com/p/RIDGID-15-Amp-10-in-Heavy-Duty-Portable-Table-Saw-with-Stand-R4513/100090444
|
# ? Nov 23, 2016 20:36 |
|
Falco posted:For the money is the Ridgid portable table saw that's on sale at Home Depot, the right choice? I have a super crappy small job site Delta table saw that gets me by for rough cuts, but it's not very precise and is frankly just a pain to work with. I don't have dedicated work space, so a cabinet saw or something of that nature is a no go, so something that is built on a stand is quite appealing. Should I jump on this while it's on sale, or hold out for something else? melon cat fucked around with this message at 02:30 on Nov 24, 2016 |
# ? Nov 23, 2016 21:32 |
|
Falco posted:For the money is the Ridgid portable table saw that's on sale at Home Depot, the right choice? I have a super crappy small job site Delta table saw that gets me by for rough cuts, but it's not very precise and is frankly just a pain to work with. I don't have dedicated work space, so a cabinet saw or something of that nature is a no go, so something that is built on a stand is quite appealing. Should I jump on this while it's on sale, or hold out for something else? I have that saw and it's alright. It's the only table saw I've ever owned though so it's hard to compare. It does get pretty good reviews and it's usually set up pretty well from the factory apparently. I think mine might be slightly out of alignment somewhere but I haven't taken the time to figure out how exactly. At the time that I got it I had to get a portable saw due to working in a car port and having to bring it inside when done. Now I have a garage shop so I'd probably go for a non collapsible one, probably something old and heavy off Craigslist. If you look up the rigid forum there's an extensive thread about those saws with some good info. Also keep in mind the ridgid lifetime warranty can be troublesome. You have to register within a set amount of time after buying and repairs can be a pain, I remember reading about a common issue with motors dying and there being a month's long backlog of tools waiting to be fixed at the repair depot.
|
# ? Nov 23, 2016 23:20 |
|
Sample size of one, but my experience with Rigid tools had been godawful. Awhile back I bought an expensive inspection camera with the "lifetime warranty", and it lasted exactly three uses (just long enough to get over the return by date) before the camera bit went all screwy. Now, every time you bump it, the screen blanks out and it's a crapshoot whether it'll boot up again at all. I've tried reaching out to customer service multiple times, but still haven't heard a single thing back. Lifetime warranty my rear end, never again buying anther one of their shoddy tools with useless warranty and service.
|
# ? Nov 24, 2016 15:21 |
|
Well it looks like the crowd has spoken, no Ridgid saw for me. I'll continue with the tiny Delta for now and see if I can squeeze out a little garage space for something a little larger in the future. Eventually I would love dedicated shop space, but for now I have to share the garage with the cars and everything else.
|
# ? Nov 24, 2016 16:17 |
|
I'm trying to decide which impact driver bit set to buy. I had my eye on this DeWalt set, but picked up this Milwaukee for much cheaper today at Home Depot. Looking at what each set includes, it appears that the DeWalt focuses on the core phillips on torx sizes (14 #2 phillips bits, in total, for instance) whereas the Milwaukee set spreads things includes a wider range of bits including hex bits. I can't recall ever seeing screws I'd want to use an impact on with with hex or weird sized torx, so my inclination is to go for the DeWalt, but I'd appreciate some opinions from some more experienced users.
|
# ? Nov 26, 2016 01:09 |
|
At least in my line of work I use torx bits semi-regularly and having decent ones for an impact would be awesome I'll probably be picking up that set
|
# ? Nov 26, 2016 02:10 |
|
Two days ago the Makita five-tool combo kit was $300. Now it's $350 or more. What the hell.
|
# ? Nov 26, 2016 02:45 |
|
Tony Doughnuts posted:At least in my line of work I use torx bits semi-regularly and having decent ones for an impact would be awesome I'll probably be picking up that set All sizes or just the sizes used in things like deck screws? What do you do out of curiosity? BTW, the Milwaukee set is a black friday thing. They may be on sale through the weekend, but if you're set on them I'd order one for pickup today.
|
# ? Nov 26, 2016 03:02 |
|
TooMuchAbstraction posted:Two days ago the Makita five-tool combo kit was $300. Now it's $350 or more. What the hell. It was on sale for the week before BF.
|
# ? Nov 26, 2016 03:09 |
|
Christ is there any way to avoid or shorten the rechargeable tool talk? Page after goddamn page of Makita vs dewalt Just loving buy one already, if you don't like it return it. If you're a home user you'll never push them to their limits anyways, if you're a contractor you'll have your own opinions. How much time are you guys even spending more than 20 feet from an outlet? Just buy corded tools as you need them. If your jobs are small enough that they can be handled by a plastic thing you can hold in one hand, it's a small job. Buy whatever. You won't be able to buy batteries and chargers to match eventually anyways, they're consumer goods with a calculated lifetime. Face it, your rechargeable tools are going to spend 99.99% of the next ten years collecting dust on the workbench in your garage. Eventually you'll buy some new ones, from whatever is available then. They're all made in the same factory anyways.
|
# ? Nov 26, 2016 03:20 |
|
Hey, look. Tool chat in the tool thread!
|
# ? Nov 26, 2016 03:26 |
|
Uncle Enzo posted:Christ is there any way to avoid or shorten the rechargeable tool talk? You can always unsubscribe from the thread. e: f;b
|
# ? Nov 26, 2016 03:27 |
|
Uncle Enzo posted:Christ is there any way to avoid or shorten the rechargeable tool talk? Page after goddamn page of Makita vs dewalt Nothing matters, death is certain
|
# ? Nov 26, 2016 03:47 |
|
I own plenty of tools that outlived their original owners. Rechargeable tools won't. They were designed not to. Tools: Dewalt, Makita, Bosch, Milwaukee: Just pick one Jesus
|
# ? Nov 26, 2016 03:59 |
|
Hubis posted:Nothing matters, death is certain
|
# ? Nov 26, 2016 04:39 |
|
Uncle Enzo posted:Christ is there any way to avoid or shorten the rechargeable tool talk? Page after goddamn page of Makita vs dewalt Except for drills/drivers. If you have a corded drill, you're a degenerate of the highest order and I feel like the most rational way to deal with you is an annual Purge night.
|
# ? Nov 26, 2016 05:24 |
|
|
# ? Jun 5, 2024 05:50 |
|
You can pry my corded drill from my cold, dead hands. gently caress drilling holes in metal on a battery.
|
# ? Nov 26, 2016 05:37 |