|
I think that's pretty much the regular price for the kit. Basically figure about a hundred bucks for each bare tool, with two batteries and a charger thrown in if it's a larger kit. I personally love my 3 amp hour batteries, I wouldn't want bigger unless I were using them with a grinder or something. For 90% of projects where you're switching between a dozen different tools, two 3 amp hour batteries will last you all day, and they charge fast enough the other battery will be ready by the time you need it anyways. I'd personally get the larger combo kit with the circular saw, that's hands down my favorite tool of the bunch, with the impact driver a close second. I'd also get a decent impact bit set. I recently got this milwaukee impact set for Christmas and it's just awesome. The Dewalt impact bit set is garbage though, for reference. The bits aren't cut well and just don't fit right.
|
# ? Jan 26, 2017 20:49 |
|
|
# ? Jun 5, 2024 19:34 |
|
Powershift posted:Also, check local industrial auctions for piles of old service carts. They sometimes go for peanuts and often have 4-6 beefy as all gently caress castors underneath. I would say my lack of a shop+concrete floor basement has prevented me from making these decisions in the past but that would be a blatant lie, since I ended up with a free bridgeport and a free lathe and a free 60 gallon compressor and a free 3-phase monster of a drillpress with nowhere to put them. What I'm saying is go to more places where cheap equipment is available and you'll find places to put them... (zero casters were included but it was still worth it)
|
# ? Jan 26, 2017 20:57 |
|
OSU_Matthew posted:I think that's pretty much the regular price for the kit. Basically figure about a hundred bucks for each bare tool, with two batteries and a charger thrown in if it's a larger kit. I wasn't a fan of the Milwaukee Shockwave stuff a few year ago. Unless they've improved the fit of the P2 bits, they used to be really loose. The R2 (S2) bits were fine, as were the P1. The Makita Gold impact bits are loving great, however.
|
# ? Jan 26, 2017 23:05 |
|
Been waffling on a lithium ion impact wrench for the past few weeks - finally pulled the trigger on a Dewalt DCF899P1. Was originally considering a Milwaukee 2763 M18 but it's practically the same tool as the Dewalt above in terms of torque but is substantially longer and I like the light being on the base instead of just below the anvil. Already eying the angle grinder and reciprocating saw that use the same battery ecosystem too
|
# ? Jan 27, 2017 00:36 |
|
sharkytm posted:The Makita Gold impact bits are loving great, however. Those things are legit. The finish on my first #2 phillips bit is a little worn and I've had the set for about half the time I've owned the impact driver. In the first half of that drivers life (about the same number of screws) I broke about 6 of the Milwaukee bits and threw out a few others because they had worn down too much and started stripping screw heads.
|
# ? Jan 27, 2017 01:20 |
|
CamelCamelCamel just notified me that Amazon has a Warehouse Deal (essentially open box return) on the California Air Tools Compressor everyone here loves so much. Currently $101. Not sure what "acceptable" condition means, but they're pretty good about returns if you have an issue.
|
# ? Jan 27, 2017 22:19 |
|
BeastOfExmoor posted:CamelCamelCamel just notified me that Amazon has a Warehouse Deal (essentially open box return) on the California Air Tools Compressor everyone here loves so much. Currently $101. Not sure what "acceptable" condition means, but they're pretty good about returns if you have an issue. Who here loves them? I haven't heard of them, but I'm looking for a quiet compressor. The specs on that look super weak, though. 2 cfm at 90psi is going to take a LONG time to do any work.
|
# ? Jan 27, 2017 22:52 |
|
I definitely remember seeing one in AI at some point and all over the internet for a while. They're praised for how quiet they are but are definitely not intended to run any high CFM tools
|
# ? Jan 28, 2017 01:53 |
|
They come in larger sizes, too. Look at the scale of the air output on that compressor, it's tiny.
|
# ? Jan 28, 2017 02:16 |
|
sharkytm posted:The batteries are physically the same size. There aren't monsters like the 9.0Ah Milwaukee. I am completely blown away by how good the Makita Gold phillips bits are. They fit so damned well it's honestly a little ridiculous. The magnetic holder is pretty good too.
|
# ? Jan 28, 2017 02:48 |
|
Galler posted:I definitely remember seeing one in AI at some point and all over the internet for a while. They're praised for how quiet they are but are definitely not intended to run any high CFM tools I love mine. AL tanks, and quiet enough to use in the house, and I can still chat with the wife while it runs. QUIET. Not powerful, but perfect for nailers and whatnot.
|
# ? Jan 28, 2017 05:08 |
|
Has anyone ever used a Turbine setup to paint? https://www.youtube.com/watch?v=OaJnjfYUXSY http://www.jalopyjournal.com/forum/threads/hvlp-turbine-paint-systems.529675/ It sounds perfect for anyone looking to paint in their own shop: Little overspray, uses very little paint, no need for an air compressor setup, professional quality paint job for $500. Bulk Vanderhuge fucked around with this message at 19:26 on Jan 28, 2017 |
# ? Jan 28, 2017 19:23 |
|
Bulk Vanderhuge posted:Has anyone ever used a Turbine setup to paint? I had a Turbinaire HVLP and it was loving horrible. Would have worked good for staining cabinets but that's about it. That's the only thing I've used so idk if there are better/worse products out there.
|
# ? Jan 28, 2017 20:15 |
|
Bulk Vanderhuge posted:Has anyone ever used a Turbine setup to paint? Holy poo poo. Let the research commence.
|
# ? Jan 28, 2017 20:18 |
|
I need that.
|
# ? Jan 28, 2017 20:24 |
|
Does anybody have a good recommendation on a snow blower? I'm about to be balls deep...
|
# ? Jan 29, 2017 02:58 |
|
THE BLACK NINJA posted:Does anybody have a good recommendation on a snow blower? I'm about to be balls deep... Ariens used to be the good stuff. Probably a Chinese company now but worth looking into.
|
# ? Jan 29, 2017 05:18 |
|
rdb posted:Ariens used to be the good stuff. Probably a Chinese company now but worth looking into. Ariens are still good but I personally prefer Husqvarna (kind of depends on the size you want though). They're less expensive, but I like the chute control more and they use LED headlights instead of bulbs. Ariens has a nicer transmission and the gearbox is probably more stout though. From memory, I don't think the Ariens have shear pins on the impeller itself (I know Troy-Bilt and Cub Cadet don't) so if the softball sized chunk of your rotting driveway or whatever misses the cutting blades and gets caught in the impeller instead you're SOL. Also, for some weird reason, Ariens still uses metal skid shoes even though everyone else is moving to plastic because it doesn't scratch your driveway up (seriously. People used to have to pay extra to buy a plastic set to change over.) All the above applies to 2-stage snow blowers only. If you're going to be up to your balls in snow and looking at a single-stage, I'd recommend that you reconsider. Lowe's sells both Husqvarna and Ariens so you can dick around with both (and Troy-Bilt, but only one of them is cheaper than a Husqvarna and takes >7 cranks of the auger to turn the chute around when you reach the end of the driveway and doesn't have headlights or heated hand grips or the thing that locks the auger control in the "on" position while you're holding the drive control down so you can fiddle with the controls while driving) but they don't have the cool fuel injected Ariens (that cost more than their carbureted brothers) that dealers (and Home Depot?) do, in case that matters to you. The Husqvarna I got at the beginning of the season has fired right up every time though, even when I don't use the electric starter.
|
# ? Jan 29, 2017 06:43 |
|
THE BLACK NINJA posted:Does anybody have a good recommendation on a snow blower? I'm about to be balls deep... So it snowed like a foot here and finally I said gently caress it, I'm getting a snow blower. After doing a bunch of research, I decided on a 24" two stage recently. This one has more features than most comparably priced ones. Electric start, chute control, "power steering" (pretty sure it just freewheels one wheel or the other so it's a lot easier to turn), has like 6 loving speeds in forward and 2 in reverse, includes the the wear sliders (why some don't I don't know), a headlight, etc. There's a million handles, levers and knobs to control everything, it's silly. I ordered from HD because they delivered right to my house and brought it to my garage on a pallet for free. Had to do some minor assembly. Fired right up once I threw some gas in. http://www.homedepot.com/p/Cub-Cadet-24-in-208cc-2-Stage-Electric-Start-Gas-Snow-Blower-with-Power-Steering-2X-24/207161450 It hasn't really snowed since. How big is your driveway/sidewalk? How much space do you have to store it?
|
# ? Jan 29, 2017 14:03 |
|
Confirming that the power steering is a trigger that disengages the wheel on that side to make the machine turn. Ariens instead uses some weird automatic locking differential (https://www.youtube.com/watch?v=J7_T0Ny9Jes). Most manufacturers don't put power steering on <27in models though because it isn't that hard to turn a smaller machine on a snowy driveway imo. I don't like the single lever chute control that Cub Cadet/Troy-Bilt use personally. On the Troy-Bilts, at least, there is more effort involved, but I don't know if they loosen up a bit over time. BTW, Husqvarnas are currently $100 off at Lowe's right now (http://www.lowes.com/pd/Husqvarna-208cc-24-in-Two-Stage-Electric-Start-Gas-Snow-Blower-with-Heated-Handles-and-Headlights/50223009).
|
# ? Jan 29, 2017 14:55 |
|
Cat Hatter posted:I don't like the single lever chute control that Cub Cadet/Troy-Bilt use personally. I can understand that, it's a little awkward in its operation but it works.
|
# ? Jan 29, 2017 15:12 |
|
My parents bought an ariens sometime in the 2000's. It definitely had a shear bolt. Fwiw I see they offer a fuel injected model now. I had a fuel injected Subaru robin engined pressure washer. It started in two pulls every time even after it sat all winter. It was sooo nice and every time I dick with the choke on the Honda GX I have now I regret selling it.
|
# ? Jan 29, 2017 16:35 |
|
I love my old rear end Ariens 1032. I put a predator 14hp on it a few years ago, and now it shoots 50 feet.
|
# ? Jan 29, 2017 16:55 |
|
sharkytm posted:I love my old rear end Ariens 1032. I put a predator 14hp on it a few years ago, and now it shoots 50 feet. Why did you go with the 14hp? Did you have to regear the pulleys for different engine speed? I was thinking about the $99 HF honda clone (6.5 hp?) to replace the old 6 hp tecumseh on my blower.
|
# ? Jan 29, 2017 20:16 |
|
Thanks for all the input. Looks like a 27 inch Huskvarna 2 stage is a grand, and the 24 inch is 800. Are the three inches worth it? What about chainsaws?
|
# ? Jan 29, 2017 20:36 |
|
THE BLACK NINJA posted:Thanks for all the input. Looks like a 27 inch Huskvarna 2 stage is a grand, and the 24 inch is 800. Are the three inches worth it? Where do you live, how much do you need to clear and what's the average snowfall? If it doesn't come with a larger engine I would go with a 24", we got lots of lake effect and poo poo would bog in the heavy wet stuff. I like my stihl MS362CM, starts easy, plenty of power for the bar I have on it, however it's not cheap.
|
# ? Jan 29, 2017 22:26 |
|
jailbait#3 posted:Why did you go with the 14hp? Did you have to regear the pulleys for different engine speed? I was thinking about the $99 HF honda clone (6.5 hp?) to replace the old 6 hp tecumseh on my blower. It was the biggest that would fit... Naturally. No difference in pulleys, the engine speeds were close enough.
|
# ? Jan 29, 2017 22:39 |
|
I've got the 24" Husqvarna and it does my circle drive just fine. I've only had it for this year though and grew up with a 15" single stage so ymmv. rdb posted:My parents bought an ariens sometime in the 2000's. It definitely had a shear bolt... The cutting augers have shear bolts but the impeller doesn't (I just checked), I don't know if the old ones did though. It's possible that with the gearing that it wouldn't help anyway and that's why nobody but Husqvarna puts shear bolts on the impeller? Cat Hatter fucked around with this message at 00:23 on Jan 30, 2017 |
# ? Jan 29, 2017 22:46 |
|
sharkytm posted:I finally caved and bought this impact. It's loving great. Lugs popped right off, brake calipers, ditto... Installed the new front hitch on my truck with nothing but this and 2 sockets. Finished this today, and hung it up. I'm relatively happy with the final layout, but it'll need some tweaks.
|
# ? Jan 29, 2017 23:50 |
|
sharkytm posted:Finished this today, and hung it up. I'm relatively happy with the final layout, but it'll need some tweaks. This garage brought to you by Makita. I'm so loving jealous.
|
# ? Jan 29, 2017 23:54 |
|
Cat Hatter posted:I've got the 24" Husqvarna and it does my circle drive just fine. I've only had it for this year though and grew up with a 15" single stage so ymmv. I misunderstood what your original reference was. Not sure if it had a bolt on the impeller. I thought you were implying it had no sheer bolts whatsoever.
|
# ? Jan 30, 2017 00:48 |
|
THE BLACK NINJA posted:Thanks for all the input. Looks like a 27 inch Huskvarna 2 stage is a grand, and the 24 inch is 800. Are the three inches worth it? I dunno poo poo about snow blowers, but I have a little 16" husqvarna chainsaw and I have cut down some plenty large trees with it...
|
# ? Jan 30, 2017 01:54 |
|
sharkytm posted:Finished this today, and hung it up. I'm relatively happy with the final layout, but it'll need some tweaks. Nice. I really wish those chargers had an easy way to wall mount them. I think I'm going to try making a backing plate with recesses for the feet and using heavy zip ties to hold it in place. My Ridgid charger had keyholes on the back (too bad Ridgid sucks).
|
# ? Jan 30, 2017 02:20 |
|
Geoj posted:Been waffling on a lithium ion impact wrench for the past few weeks - finally pulled the trigger on a Dewalt DCF899P1. Put this through its paces today, overall pretty impressed. Only downside vs pneumatic is size and weight, definitely can't wedge it into tight spaces and it's pretty heavy. Broke free a lower shock bolt that hasn't been touched in over 10 years, seemed like it had to hammer the fastener for a bit longer than expected but it eventually drove it out. Chews through other fasteners like lug nuts without even skipping a beat, and the middle power setting is perfect for reinstalling wheels - if I had to guess it applies about 90 ft-lbs of torque, plenty to seat the wheel and drop the car back down before finishing with a torque wrench. Geoj fucked around with this message at 02:27 on Jan 30, 2017 |
# ? Jan 30, 2017 02:21 |
|
rdb posted:I misunderstood what your original reference was. Not sure if it had a bolt on the impeller. I thought you were implying it had no sheer bolts whatsoever. Fair enough, most people don't think about the impeller because its behind the augers and in theory you would hit one of those first. The only reason I was even looking for that is because my friend's wife managed to bullseye a newspaper right between the augers and get it wedged in the impeller pretty bad. I would have thought you'd practically have to try to miss the augers.
|
# ? Jan 30, 2017 02:22 |
|
One Day Fish Sale posted:Nice. I really wish those chargers had an easy way to wall mount them. I think I'm going to try making a backing plate with recesses for the feet and using heavy zip ties to hold it in place. My Ridgid charger had keyholes on the back (too bad Ridgid sucks). Me too. I used two pieces of wood with angles cut into them to secure them. I even notched the back one for the vents so they don't get hot. It's annoying, just like routers and switches with no keyholes. Boaz MacPhereson posted:This garage brought to you by Makita. Thanks. I want a few other tools, but that's most of what I need. The OMT is supposed to be good, and I could use a radio maybe. sharkytm fucked around with this message at 03:34 on Jan 30, 2017 |
# ? Jan 30, 2017 03:32 |
|
Are there visible bloodstains on the finished piece?
|
# ? Jan 30, 2017 03:54 |
|
I'm actually a little bit sad that my wife and I are moving to New York, because I was looking forward to buying a chain saw and a snow blower.
|
# ? Jan 30, 2017 03:56 |
|
sharkytm posted:Me too. I used two pieces of wood with angles cut into them to secure them. I even notched the back one for the vents so they don't get hot. It's annoying, just like routers and switches with no keyholes. Don't forget a string trimmer! Also, can confirm, the oscillating multi tool is pretty great, especially the quick change chuck Those brackets turned out awesome by the way! Much nicer than the shelf all mine are crammed on.
|
# ? Jan 30, 2017 03:58 |
|
|
# ? Jun 5, 2024 19:34 |
|
LOL, nope. No blood was shed in the garage, actually. I clamped my other hand onto it, plus it didn't bleed right away. The open fracture plus the compression injury meant it didn't bleed for a solid 30 seconds. The Dr isn't sure what's gonna happen with my nail. It could come in fine, it could come in semi OK, or it could come in sideways crazy rear end gently caress. If that's the case, I'll get the nail killed completely. Yay. OSU_Matthew posted:Don't forget a string trimmer! Also, can confirm, the oscillating multi tool is pretty great, especially the quick change chuck Thanks. The brackets are really simple. 3x3x1/2" HDPE angle, table saw, drill and impact. Sadly, I didn't even build the bracket for the sabre saw that I got injured mocking up. sharkytm fucked around with this message at 04:03 on Jan 30, 2017 |
# ? Jan 30, 2017 03:58 |