|
Ouch. that's rough. Super cool of you to help him replace his army though! So when I went to buy paints, this little guy was calling to me so I adopted him. I still have to smooth out the greenstuff and add some details and stuff, but I think it came out alright. I love making custom stuff on my spacemans.
|
# ? Mar 11, 2017 23:58 |
|
|
# ? Jun 13, 2024 05:16 |
|
Aww, little Tau dogside.
|
# ? Mar 12, 2017 00:00 |
|
Hey y'all, I have a new painter question for you. I've never worked with masking tape or lines before, but would appreciate some guidance. I've basecoated some UCM Frigates (prime white Krylon, then go over with the AP Crystal Blue rattlecan color primer). Now I've stuck some masking tape on (2mm Tamiya). I've heard my next step is to paint over the masking tape with the basecoat to stop bleeding under the edges (particularly because I'm worried about the tape not being perfectly stuck as I went over some of the corners and edges and valleys on this frigate). Is it better to do that with the rattle spray color, or a brush? I can do either, since I have the crystal blue rattle and I have the crystal blue in a dropper. I could also do a gloss or other coat on top afterwards - is that necessary? (One day I'll get an airbrush, just not anytime remotely soon.)
|
# ? Mar 12, 2017 03:23 |
|
Arcturas posted:Hey y'all, I have a new painter question for you. I've never worked with masking tape or lines before, but would appreciate some guidance. I've basecoated some UCM Frigates (prime white Krylon, then go over with the AP Crystal Blue rattlecan color primer). Now I've stuck some masking tape on (2mm Tamiya). I've heard my next step is to paint over the masking tape with the basecoat to stop bleeding under the edges (particularly because I'm worried about the tape not being perfectly stuck as I went over some of the corners and edges and valleys on this frigate). Is it better to do that with the rattle spray color, or a brush? I can do either, since I have the crystal blue rattle and I have the crystal blue in a dropper. I could also do a gloss or other coat on top afterwards - is that necessary? I'd recommend doing it with a spray if you're able. This gives it a more uniform, smooth coat, and doesn't run the risk of accidentally pulling up the tape like you might do with a brush. When you pull off the masking tape, there's a chance that some of the paint along the edge will come off. I don't know if gloss would help with that or not, but it might be worth a try. Consider testing it out on something first though.
|
# ? Mar 12, 2017 04:32 |
|
drat, these are some old rear end paints
|
# ? Mar 12, 2017 10:38 |
|
Southern Heel posted:drat, these are some old rear end paints Those are the same bottles that P3 paint comes in now. It's a shame, I like those pots (even though they're not droppers) Yet another addition to the long list of poor decisions by GW.
|
# ? Mar 12, 2017 10:56 |
|
Indeed - I don't recognise those on the far left, but I had brothers-of-friends who had the inks. The middle-right is quite familiar to me, but when I got old enough to have disposable income (as opposed to purely hand-me-downs) they'd changed to those AWFUL screw tops. EDIT: V nope you're right it was the hex flip-top. Southern Heel fucked around with this message at 14:34 on Mar 12, 2017 |
# ? Mar 12, 2017 14:23 |
|
Southern Heel posted:drat, these are some old rear end paints drat I'm so hard right now, those are some sexy paints! These and the hex pots that followed them (soft cap, not the bolter shell screw tops) are the best pots GW has ever used, there's a reason other companies still use them. Also the original Shining Gold has pretty much the best coverage out of all the GW golds I've tried (the new Balthazar gold is almost as good). Pointless fun fact: I found out recently that Titillating Pink is actually fluorescent. This may be part of the reason they stopped producing it.
|
# ? Mar 12, 2017 14:33 |
|
Funnily enough I didn't actually join the dots but I've got a poo poo load of Coat d'Arms paints which was the company that produced them for GW in this era AFAIK - and honestly other than the actual hues they're really bad - a significant step down from Vallejo, P3 and probably on-par with Army Painter.
|
# ? Mar 12, 2017 14:35 |
|
HebrewMagic posted:Might be lost forever though, his army was stolen as soon as he moved out. I'm quietly hoping to get him some of what he lost come his birthday/xmas.
|
# ? Mar 12, 2017 14:49 |
|
What is with nerds losing or getting their armies stolen because they store them in vehicles? Jesus every week I hear a story along those lines.
|
# ? Mar 12, 2017 16:04 |
|
Fyrbrand posted:What is with nerds losing or getting their armies stolen because they store them in vehicles? Jesus every week I hear a story along those lines. My ex took my 3rd edition 40k starter box, with an extra box of assault marines when we broke up. Which was a really dick move considering she didn't even know how to play 40k or paint. I'M STILL BITTER ABOUT IT
|
# ? Mar 12, 2017 19:48 |
|
Southern Heel posted:drat, these are some old rear end paints They're not as bad as the generation that followed.
|
# ? Mar 12, 2017 20:10 |
|
Any recommendations for buying a airbrush online if I live in Canada?
fadam fucked around with this message at 20:16 on Mar 12, 2017 |
# ? Mar 12, 2017 20:12 |
|
Fyrbrand posted:What is with nerds losing or getting their armies stolen because they store them in vehicles? Jesus every week I hear a story along those lines. People are stupid and leave them in the open in what looks like cases for carrying guns or other valuable equipment.
|
# ? Mar 12, 2017 21:22 |
Eclipse Phase game travelled from Mars to Venus. Made up Venus hemispheres. They're ok, but how would I paint clouds better. I wound up using a fuzzy flat dry brush but it doesn't look quite right.
|
|
# ? Mar 13, 2017 00:40 |
|
Ilor posted:You can see where this is going. By the end of the day, they'd completely forgotten that the army was there, and when his partner drove the truck to the dump to get rid of the dresser, he lost his entire, lovingly converted Tyranid army. Jesus, my heart goes out to him. Fyrbrand posted:What is with nerds losing or getting their armies stolen because they store them in vehicles? Jesus every week I hear a story along those lines. Semi related I almost lost my CSM codex in a car accident last year, but my buddy fished it out of the back seats after the fact. HebrewMagic fucked around with this message at 00:57 on Mar 13, 2017 |
# ? Mar 13, 2017 00:54 |
|
I'm struggling to get the skin on this guy looking good - I feel like its lacking texture and its quite flat. I've been looking at the massivevoodoo paintjobs and ignoring that I didn't have quite the same colours as them, I just can't get the same life into it. I was considering stippling a few different shades of transparent flesh tones to help, or some blue or orange shades in, any advice (other than strip and start again, looking at you xir )?
|
# ? Mar 13, 2017 01:35 |
|
Pierzak posted:As an Infinity player, if I can get the above mirror finish on my Nomads' helmets I'm totally gonna make them all neon and DaftPunky as gently caress. This is kind of a old post but I was going through the thread looking at miniatures and this is the material you are looking for : http://www.c1-models.com/c1-metalizer/ There's also some other materials like Alclad, but this is basically turn plastic chrome. Not sure if other people have posted about this.
|
# ? Mar 13, 2017 04:48 |
|
ijyt posted:I'm struggling to get the skin on this guy looking good - I feel like its lacking texture and its quite flat. I've been looking at the massivevoodoo paintjobs and ignoring that I didn't have quite the same colours as them, I just can't get the same life into it. Anything we can do to up the contrast. Mix the darkest skin tone you have in there with purple (say, 2 dark skin, 1 purple ratio.) Mix some red or burnt sienna like colors into your mid tones and dilute it. Use it as a controlled wash, especially near that lip scar. Some red and purples getting mixed into the dark skin tone will help the lower lip stand out as well. I think the face is in a VERY good place, personally.
|
# ? Mar 13, 2017 05:46 |
|
Purples are always good, imo.
|
# ? Mar 13, 2017 05:48 |
|
I'll experiment with that, thanks Feeple. Feel like I'll be buying this bust again in a year just to try and paint it better .
|
# ? Mar 13, 2017 09:41 |
|
I finally finished the homemade Blood Rage token that I posted about a million years ago! I ended up making a 2-part mold since I added some detail on the back of it. I was a little worried since my silicone was incredibly viscous, but the details came out fine. Too bad the bottom of this cast came out hollow. I've changed the mold a bit so it should flow in there more easily. Thing learned through all this: loving think about the order I do things in. Don't add stuff before detailing, just slap stuff, like the horns, on top of the details. Warm the silicone to room temperature to make it flow better. Keep the cats out of the room when you pour silicone. Your girlfriend WILL notice that small patch of fur you had to trim because it wanted to play with the stick you used to mix the silicone.
|
# ? Mar 13, 2017 12:26 |
|
Infinity Haqq'Islam Drop Troop:
|
# ? Mar 13, 2017 13:54 |
|
Bistromatic posted:I did a colour test for my Dropfleet Shaltari today: I know this is late to the game here but I am gonna need you to tell me what you did to get that purple. That poo poo is like my painting white whale.
|
# ? Mar 13, 2017 14:50 |
|
Rogue Trader Inquisitor Lord in Terminator Armor: Trying my hand at matt varnishing and holy poo poo why didn't I do this sooner!?
|
# ? Mar 13, 2017 18:15 |
|
signalnoise posted:I know this is late to the game here but I am gonna need you to tell me what you did to get that purple. That poo poo is like my painting white whale. No problem at all, i enjoy the painting thread a lot so i tend to keep an eye on it even if i don't post. I first did a gradient with Vallejo Model Air Gunmetal, Chainmail and Silver. Then i hit the front with Golden Permanent Violet Dark and finally gave everything a coat of Golden Dioxazine Purple, going lighter on the areas that already had violet on them. At that stage it's pretty glossy so i gave it a coat of satin varnish (an old can of GW Purity Seal in this case). For completeness sake: The dots are Golden Teal, the larger ones have a highlight with Rackham Patina. The gold is Golden Iridescent Gold. I'll be doing a detailed step by step again when i paint the fleet. Though it'll be a lot less steps than the UCM.
|
# ? Mar 13, 2017 19:35 |
|
Southern Heel posted:Rogue Trader Inquisitor Lord in Terminator Armor: This guy's loving dope.
|
# ? Mar 13, 2017 20:05 |
|
Southern Heel posted:Rogue Trader Inquisitor Lord in Terminator Armor: Looking good! Please tell me you play Howling Griffons and he's an ally
|
# ? Mar 13, 2017 20:49 |
|
Crosspostin' from the 30k Thread.Lord_Hambrose posted:Finished my test model for my Emperor's Children Scheme. I did the bolter black as a nod to the 40k colors, but I was considering doing it gold or maybe white. Not 100% sure. Definately going to do some pink armor on my inevitable 30 Combi-Plasma Vets.
|
# ? Mar 13, 2017 21:24 |
|
Zark the Damned posted:Looking good! Please tell me you play Howling Griffons and he's an ally Someone said that on the Oldhammer FB group too, ha! No, it was a custom chapter called Antiquator of Xerxes with a bunch of RT sculpts mixed in. I thought about doing a Lamenter detachment back when I got into the hobby again a few years ago but it never really materialised other than this test mini:
|
# ? Mar 13, 2017 22:31 |
|
I'm looking for advice or suggestions on this one. I'm trying to figure out how to paint the wings on these models I'm trying to keep the blue/gold contrast as the focal point, but the wings are huge and grey. Any advice as to how to paint these in a way that's cool but keeps them low profile? Here's the main scheme for reference:
|
# ? Mar 13, 2017 23:00 |
|
Bistromatic posted:I'll be doing a detailed step by step again when i paint the fleet. Though it'll be a lot less steps than the UCM. Could you give me the exact model name or whatever of the Golden poo poo you use? Like, what line it is? Or could you link me to that line on dickblick.com? Alternatively: https://www.amazon.com/Golden-0000954-0-Acrylic-10-Color-Transparent/dp/B00K5F6PVI Is that what you have? Looks like it would be a very cool replacement for my Ghost Tint paints. Are they airbrushable?
|
# ? Mar 13, 2017 23:12 |
|
Booyah- posted:I'm looking for advice or suggestions on this one. I'm trying to figure out how to paint the wings on these models Edge highlight with a brighter metal, wash with nuln oil, re-highlight to clean up. Then a further brighter highlight on the bits that would reciever the most light. Or go true metallic metal and get hardcore
|
# ? Mar 13, 2017 23:30 |
|
So I started blocking in colors and lines. I'm kinda liking the white pants instead of assless chaps going on, but that was more because black and white are easier to see.I really don't want to paint the First Order insignia on the folds of a jacket so if there's any suggestions on what else I can add to identify FN-2187 as such I'd like to do that instead. Also, I went with some mix of dark brown to offset the white, might be mixing a bit of purple to the skin later. But, I'm a bit concerned about how to make the head outline stand out from the background. Would there be an appropriate outline I can trace around the whole figure just like the white on the dark Kylo Ren figure? Chill la Chill fucked around with this message at 04:33 on Mar 28, 2017 |
# ? Mar 13, 2017 23:44 |
|
Rolled up sleeves, black arms, and boyega's hair might be enough. You could also be cheeky and paint the insignia on one of his cheeks, since that area of the ship is pretty smooth
|
# ? Mar 13, 2017 23:57 |
|
Neurolimal posted:Rolled up sleeves, black arms, and boyega's hair might be enough. You could also be cheeky and paint the insignia on one of his cheeks, since that area of the ship is pretty smooth e: Now I kinda just want to make it a tramp stamp in reverse colors.
|
# ? Mar 14, 2017 00:00 |
|
Finally finished my bouncer from a few pages back. I'm not sold on the armor. I was rocking 2bb'ing with the skin and gems, but the second I started on the metallics I got really lazy. Going to go back to experimenting with NMM on the next armored dude.
|
# ? Mar 14, 2017 02:01 |
|
Southern Heel posted:Someone said that on the Oldhammer FB group too, ha! No, it was a custom chapter called Antiquator of Xerxes with a bunch of RT sculpts mixed in. This is some good poo poo right here, sup fellow Oldham
|
# ? Mar 14, 2017 05:03 |
|
|
# ? Jun 13, 2024 05:16 |
|
signalnoise posted:Could you give me the exact model name or whatever of the Golden poo poo you use? Like, what line it is? Or could you link me to that line on dickblick.com? Here's them on dickblick: http://www.dickblick.com/items/01650-6921/ http://www.dickblick.com/items/01650-6091/ And here on the Golden website directly: https://www.goldenpaints.com/products/colors/high-flow/permanent-violet-dark https://www.goldenpaints.com/products/colors/high-flow/transparent-dioxazine-purple And yeah, that amazon link looks good too.
|
# ? Mar 14, 2017 07:56 |