|
I picked up a satchel from Far horizon Traders a while back on recommendation from this thread I think and it has worked amazing and the seller was very attentive / friendly.
|
#
?
Nov 2, 2017 15:32
|
|
|
|
| # ? May 23, 2024 04:35 |
|
|
Still throwing away more money than what is necessary, I'm finalizing my synth studio setup with those JBL LSR305 monitors and a pair of Meris effects   
|
|
#
?
Nov 2, 2017 15:55
|
|
|
 Nice snow boots for Canadian winters. Made mostly in quebec. Not the most stylish but for winter chores, to play outside with my kids or to go to and come back from work they are hard to beat. Pretty much what Sorel used to be before they were bought by Columbia KingColliwog has a new favorite as of 02:17 on Nov 3, 2017 |
|
#
?
Nov 2, 2017 22:10
|
|
|
KingColliwog posted:Pretty much what Sorel used to be before they were bought by Columbia
|
|
#
?
Nov 3, 2017 14:08
|
|
|
Are there any split-style ergonomic keyboards that are a) cool looking, b) use quiet mechanical switches, and c) aren't hellaciously expensive? I had my eye on an Ergodox with custom-printed keycaps, back in July, but holy poo poo is that a lot of money (and I missed the deadline to order the keycaps, which wouldn't have shipped until February 2018, anyway ...) Plus the Ergodox has the spacebar and enter key in a really weird place, which probably would have been tough to get used to.  Do I have any other alternatives?
|
|
#
?
Nov 3, 2017 14:33
|
|
|
betterinsodapop posted:I bought my first Sorels a few years ago and was pretty shocked (and bummed) when I found the MADE IN CHINA on em. Not sure why they're still so expensive. Cause people buy them without thinking. It's what they've been buying since they were kids and they have a reputation of being great. They are not bad, but not anywhere close to as good as they used to be. You could keep a pair for 10-15 years or more if you took care of them, now if you get 5 years out of a pair you're lucky. Oh and they might leak a bit nowadays KingColliwog has a new favorite as of 14:58 on Nov 3, 2017 |
|
#
?
Nov 3, 2017 14:56
|
|
|
null_pointer posted:Are there any split-style ergonomic keyboards that are a) cool looking, b) use quiet mechanical switches, and c) aren't hellaciously expensive? I understand most of those, but is the "RUB OUT" button a pornhub launcher macro key or something?
|
|
#
?
Nov 3, 2017 15:21
|
|
|
Doom Rooster posted:I understand most of those, but is the "RUB OUT" button a pornhub launcher macro key or something? That key requires a teledildonics-enabled system.
|
|
#
?
Nov 3, 2017 15:53
|
|
|
Doom Rooster posted:I understand most of those, but is the "RUB OUT" button a pornhub launcher macro key or something? Sorry. RUB OUT was just how older teletype and mainframe keyboards did DELETE. No One-Button Wanks, here. Edit: autocorrect null_pointer has a new favorite as of 18:07 on Nov 3, 2017 |
|
#
?
Nov 3, 2017 17:34
|
|
|
Got an iPad Pro 12.9 and Acer Predator X34 monitor for my birthday (a month ago), and what I’ve learned from those is that 16:9 is loving dead to me and nonstandard aspect ratios rule. The iPad Pro has worked out fabulously as a laptop replacement so far - for 99% of all times I need a laptop, this one does it great. I would probably still recommend a Chromebook for the same purposes if you don’t need a particular software/workflow thing. It is very nice, though. 2 keyboards arriving today - I feel kinda bad because at least one of them will get returned as I continue my search for the perfect switch.
|
|
#
?
Nov 3, 2017 20:26
|
|
|
 Just need to send a courier to pick it up.
|
|
#
?
Nov 3, 2017 21:52
|
|
|
My Canon inkjet died yesterday when I was trying to fix a clog. I had a spare print head but apparently it was faulty and shorted out the main circuit board. So I picked up a wireless color laser for $40 off Craigslist: https://www.cnet.com/products/brother-hl-3170cdw/review/ Owner has had it for a year and the toner is half full. I don't print that much, in sporadic bursts, so laser seemed like the right choice since I've had issues with ink drying out in the past. Josh Lyman has a new favorite as of 20:30 on Nov 4, 2017 |
|
#
?
Nov 4, 2017 20:25
|
|
|
null_pointer posted:Are there any split-style ergonomic keyboards that are a) cool looking, b) use quiet mechanical switches, and c) aren't hellaciously expensive? Could get an old datahand, wish these things took off but no such luck. 
|
|
#
?
Nov 4, 2017 21:15
|
|
|
Josh Lyman posted:My Canon inkjet died yesterday when I was trying to fix a clog. I had a spare print head but apparently it was faulty and shorted out the main circuit board. Welcome to the cheap Brother laser club. Unless they have fixed it in the past 7? Years the wifi will occasionally crash out requiring a reboot. The "airprint" stuff is garbage and will die as well much faster, regardless of wire/wifi connection, same solution. Using it with a generic postscript driver over wired ethernet? Rock solid never dies. If it ever has a fault make sure you clear it, otherwise it stays on/hot until cleared. Left mine in a fault state for days on accident once when I forgot to clear it after canceling a print job.
|
|
#
?
Nov 4, 2017 21:56
|
|
|
H110Hawk posted:Welcome to the cheap Brother laser club. Unless they have fixed it in the past 7? Years the wifi will occasionally crash out requiring a reboot. The "airprint" stuff is garbage and will die as well much faster, regardless of wire/wifi connection, same solution. Using it with a generic postscript driver over wired ethernet? Rock solid never dies.
|
|
#
?
Nov 5, 2017 01:52
|
|
|
Josh Lyman posted:Should I not be using the Win10x64 Brother driver from their website? Can't comment on it, I am using whatever windows 10 autoinstalled. As long as it isn't doing any persistent background process garbage it's fine. The key is wired + disable airplay/mdns. (and my printer is 7? 8? Years old. Things may have changed, but mdns printing is awful everywhere on every printer.)
|
|
#
?
Nov 5, 2017 16:54
|
|
|
H110Hawk posted:Can't comment on it, I am using whatever windows 10 autoinstalled. As long as it isn't doing any persistent background process garbage it's fine. The key is wired + disable airplay/mdns.  The printer supports AirPrint too, which is p cool.
Josh Lyman has a new favorite as of 19:01 on Nov 5, 2017 |
|
#
?
Nov 5, 2017 18:51
|
|
|
A moose head because I suck and I'm an idiot and even though I have THREE moose hides, ONE moose beard, TWO moose legs, and a set of moose antlers, I didn't have a moose HEAD and this had to be REMEDIED because it was a GOOD DEAL and now I have absolutely no wall space left at all.
|
|
#
?
Nov 6, 2017 01:43
|
|
|
Sounds like you're almost got enough parts to complete your FrankenMoose.
|
|
#
?
Nov 6, 2017 01:45
|
|
|
Josh Lyman posted:I've got mine set up to print over WiFi, test page worked fine. Let it go into deep sleep for a few days and then try printing over WiFi.
|
|
#
?
Nov 6, 2017 02:19
|
|
|
Pick posted:now I have absolutely no wall space left at all.
|
|
#
?
Nov 6, 2017 02:32
|
|
|
mystes posted:I'm imagining a room where the entire surface area of every wall is covered by a chaotic jumble of animal body parts sticking out at random angles.  and every shelf.But it's hard, the economy has hit people hard and god help me a person sold me the most incredible beaver for $150 and I couldn't not get a beautiful, giant beaver for $150.
|
|
#
?
Nov 6, 2017 02:54
|
|
|
https://www.youtube.com/watch?v=wS3LWOTCW4A
|
|
#
?
Nov 6, 2017 02:59
|
|
|
Pick posted:
You totally got ripped off. Out here people sell beaver for like... $20.
|
|
#
?
Nov 6, 2017 03:50
|
|
|
I love how much you love taxidermy.
|
|
#
?
Nov 6, 2017 14:51
|
|
|
 Had to know. Turns out I can't live without it now
|
|
#
?
Nov 8, 2017 18:20
|
|
|
KingColliwog posted:
Tried it in Australia on some toast. Honestly was not a huge fan of that combo but I feel like I could really love it on some other stuff. I just don't know exactly what else to try it on.
|
|
#
?
Nov 8, 2017 20:04
|
|
|
khysanth posted:Tried it in Australia on some toast. Honestly was not a huge fan of that combo but I feel like I could really love it on some other stuff. I just don't know exactly what else to try it on. I think it's probably good in a lot of things where you want to add a meaty/salty taste. It's great on toast though if you slather your toast in butter and add only a little marmite. Like that toast in the picture would be loving gross. I'm sure people who grew up with the stuff can get aways with thicker spreads though
|
|
#
?
Nov 8, 2017 20:16
|
|
|
I much prefer vegemite but I was raised on it
|
|
#
?
Nov 8, 2017 23:30
|
|
|
bought myself a nice handmade wallet but with slightly darker leather. smells so good
|
|
#
?
Nov 9, 2017 09:31
|
|
|
bowmore posted:I much prefer vegemite but I was raised on it I've had Vegemite and it's not bad. It's kinda meatier, but overall it's less of a hard drug. Marmite is pretty painfully intense.
|
|
#
?
Nov 9, 2017 13:00
|
|
|
strap on revenge posted:bought myself a nice handmade wallet Link?
|
|
#
?
Nov 9, 2017 14:29
|
|
|
Handcrafted leather wallets are great. I've had my Tanner Goods wallet for a few years, and it has aged really well. It was a bit lighter than the interior seen in the corner here. Also pictured: recently purchased Samsung wireless phone charger so I can live in the future.
|
|
#
?
Nov 9, 2017 16:04
|
|
|
 Needed new shoes for the gym and these were super cheap with expedited shipping
|
|
#
?
Nov 10, 2017 03:01
|
|
|
Cakefarts Carol posted:
I got a pair similar at the thrift the other day. Still deciding if I wanna keep or sell them
|
|
#
?
Nov 10, 2017 03:54
|
|
|
bought some sweatshirts.  
|
|
#
?
Nov 10, 2017 04:37
|
|
|
couldcareless posted:Link? https://www.etsy.com/shop/RoseLeatherCrafting
|
|
#
?
Nov 10, 2017 08:49
|
|
|
I never thought I'd buy another Nintendo console but (I put one on layaway) Digital download of this 
|
|
#
?
Nov 10, 2017 17:50
|
|
|
ROCK THE HOUSE M.D. posted:bought some sweatshirts. Where did you get this, I google image searched it and it says Five Finger Death Punch sweater Fake edit: Found it on their website.
|
|
#
?
Nov 10, 2017 20:08
|
|
|
|
| # ? May 23, 2024 04:35 |
|
|
Coffee And Pie posted:I never thought I'd buy another Nintendo console but (I put one on layaway) I haven’t been that into games outside a handful of PS4 games to play with friends, but I got one and Zelda is the best game I’ve played since SNES. I am no way Nintendo biased and was blown away that I could like a 100 hour long game.
|
|
#
?
Nov 10, 2017 20:18
|
|
