|
Tons more done on noodle body 2.0 today Got the front bumper and valance and doors from the old noodle and straightened out the front end damage. The rad was pushed out of the lower brackets so i had to pull the rad up and slide it back into the holes. And the fender flairs off the parts eagle are a perfect fit. next up are lowering blocks in the rear and crank down the torsion bars up front.
|
# ? Apr 21, 2017 01:12 |
|
|
# ? Jun 5, 2024 07:02 |
|
Few more things done on noodle 2.0 today. Swapped the rear window over and swapped the cluster due to the original one being cracked and having no tach but the tach and digital clock on the new cluster isnt working. they worked fine in noodle 1.0 and 2.0 has all the plugs so i dont know if im missing something.
|
# ? Apr 22, 2017 06:26 |
|
Gave up on getting the factory tach to work and just put in a cheap amazon digital tach And got the eagle flairs bolted on Im going to try and make the side skirt off the eagle fit too, maybe even the rear bumper.
|
# ? Apr 23, 2017 19:48 |
|
finally got around to doing more work on the noodle. Got it painted black and found some old mag rims and replaced the alt belt, she was chooched. Ordered 2'' lowing blocks for the back and some vent visors, should be here tomorrow.
|
# ? May 9, 2017 07:34 |
|
got the lowing blocks in today. After hitting the old u-bolt nuts a few times with the air impact. The ubolts started flexing so the impact stopped being effective and without a breaker bar (lost my only one) we had to get creative. gave the old girl one too many hot suppers.
|
# ? May 11, 2017 05:15 |
|
finally got a start on the head replacement for my roommates 87 celica. Found the top of a lifter bucket jammed in the head and the cam and lifter that was missing that piece was chewed up pretty good. got the head off today, hopefully by the end of the week it will be back on the road.
|
# ? May 12, 2017 02:33 |
|
eberbs posted:got the lowing blocks in today. Is that a 3/8" drive? That's a lot of lever for a little ratchet. Poor little guy.
|
# ? May 12, 2017 02:45 |
|
edit: welp nevermind
|
# ? May 12, 2017 08:16 |
|
Been working away on the head swap, should be a few more days. In other news, I got to tow a absolutely mint 85 supra with a bad fuel pump out to the local airport where the owner has a hanger he keeps his car collection in. Its right off the taxi way and had to make sure no flights coming in before going onto the air strip. After i dropped his supra he got into his 93 mr2 and headed home. About an hour later i got a call to tow the mr2 after it broke down on him on the highway. Towed it back to the hanger and he throws me the keys to his mint 1st gen supercharged mr2, checked for incoming flights and said "go have some fun with it". loving thing hauled rear end, and the airport was the perfect spot to open it up. don't think i have ever had that much fun at work before. pics
|
# ? May 15, 2017 23:31 |
|
wow. Jealous!
|
# ? Aug 6, 2017 10:20 |
|
That is a proper nice collection of old Toyotas.
|
# ? Aug 7, 2017 03:20 |
|
Terrible Robot posted:That is a proper nice collection of old Toyotas. Seriously, one breaks so just go get one of the other choice vintage Toyotas.
|
# ? Aug 9, 2017 02:25 |
|
Life has been kicking my rear end but poo poo has gone from a boil to a simmer so i am going to try and update this thread on the reg. Tons has happened since my last post so i will try and remember some of it. Got my new tow truck a few months ago. 2017 F350 6.7l 5th wheel underground truck. I have put 13k km on it and it has started randomly stalling and will crank no start intermittently. It throws a code for fuel pressure but the dealership cant find whats wrong with it, so I have to deal with it atm. it will always start back up after a few minutes but for a new truck it loving sucks. The Eagle is off the road for now, it has started stalling whenever you come to a stop. I am going to do the 4.0l head swap from a 90's cherokee and get some efi going. I love me a carb but its not worth loving around with anymore. Also going to be scrapping the parts eagle in the next week or 2. I replaced the exhaust on the 88 corolla and have been driving that and the noodle body but I think i am gonna try and get off my rear end and do the 4age swap thats waiting for it in the garage. The noodle was developing a horrible chain slap and lifter tick so I replaced the timing chain, sprockets and guides and swapped one set of rockers from the spare motor in the noodle body and also got a turbo manifold for when i get around to boosting it. Also did sway bar end links. http://gph.is/2xDvCEn The chain guide had started to wear through the metal. caught it just in time. My roommates Celica is running and driving, helped him install and heat wrap some headers last week. A few bonus pics.
|
# ? Sep 29, 2017 20:55 |
|
Did a thing on the noodlebody today. The shifter housing was leaking gear oil all over the place for who knows how long so i replaced it with one from one of my parts motors\trans. topped up the gear oil while i had the housing off Hoping now i don't have to smell dank rear end gear oil while im driving. Also replaced the antenna A turbo is in the near future And bonus Celica pics
|
# ? Oct 1, 2017 00:42 |
|
Truck died again last night. Tired for half an hour to get it started but she wouldn't chooch. Only thing thats different this time is it actually said low fuel pressure on the dash, before it just threw a fuel pressue code. https://www.youtube.com/watch?v=BJVoEKh8ypU Had to wait for the 16-ton wrecker to come save me and once back at the yard it fired right back up. Its going back to the dealership again, im back in a v10 gas pot atm.
|
# ? Oct 3, 2017 23:42 |
|
Dang that's dumb. You think it's engine temp related?
|
# ? Oct 5, 2017 03:28 |
|
I know McTinkerson had to send his aluminum ecoboost F150 back to the dealer for a fuelling problem as well, though I would be surprised if anything at all was common with a 6.7L F350.
|
# ? Oct 5, 2017 03:35 |
|
angryrobots posted:Dang that's dumb. You think it's engine temp related? Don't think so. it did a crank-no-start once on a cold start after sitting overnight, i cycled the key a few times and it started.
|
# ? Oct 5, 2017 05:45 |
|
The truck died again a few nights ago and just would not start. towed to the dealer and they say its the low pressure fuel pump but there are none in canada so its gonna be a week or so. And unlocking a ford ranger. probably the easiest car to brake into. https://www.youtube.com/watch?v=CS5qwztGT0I
|
# ? Oct 11, 2017 22:44 |
|
Alternator on the corolla died last week and the only other alt i had around was an extra from my roommates cressida, looks identical aside from the casing being slightly different. Took them both apart and was able to build them into one working alt. one ugga dugga is all she takes seen a few hot suppers wore right out thats a bit better done and done
|
# ? Oct 12, 2017 02:12 |
|
Oh hey I didn't know there was another YYJ goon here (I don't have anything really to contribute other than that, sorry. Your cars are awesome.)
|
# ? Oct 12, 2017 09:08 |
|
Noodle was running like poo poo. Wonder why?
|
# ? Oct 13, 2017 21:31 |
|
Its been slow at work lately but a pretty serious pedestrian vs suv incident happened the other day, the guy is alive for now but if he pulls through its gonna be a very rough go. I also made a eagle video https://www.youtube.com/watch?v=k1KgJd5ondA
|
# ? Oct 19, 2017 20:36 |
|
so it looks like the guy might pull through but will likely loose both lags and an arm. Made another video with the faux pro camera. audio is kinda lovely. https://www.youtube.com/watch?v=Z9dEgli2G98
|
# ? Oct 21, 2017 04:32 |
|
So the water pump on the nissan exploded today glad i have parts motors to take a water pump off of.
|
# ? Oct 24, 2017 02:08 |
|
made another terrible life choice. Got this 88 ninja for $200 from work. It hasn't ran in 5+ years. it needs a full going over, tank cleaned, carbs taken apart and cleaned, brakes redone. Good news is it cranks over and has oil pressure and the tires are mint. Going to go mad max road warrior with it, i already have a newer style headlight for it and all the plastic crap is coming off.
|
# ? Nov 9, 2017 22:00 |
|
eberbs posted:made another terrible life choice. Assuming they're just as old?
|
# ? Nov 10, 2017 01:38 |
|
Larrymer posted:Assuming they're just as old? good point. After checking the date code on both tires it looks like i will be replacing both before it sees pavement. some more pictures I have started taking off all the plastics and such. the PO installed these stupid spikes all over the bike in the worst spots along with some lovely under lighting LED's.
|
# ? Nov 10, 2017 07:24 |
|
Had to replace the rad on the noodle today. the clutch fan did a number on it when the water pump grenaded. Got a good used rad from a v6 pathfinder and its almost double the thickness but bolts in fine. And did some more disassembling of the ninja. Found a rust hole in the gas tank but found a local shop with all the parts i need for cheap.
|
# ? Nov 17, 2017 01:32 |
|
I've had bad fan clutches destroy water pumps before. Dunno how you'd check for one though.
|
# ? Nov 17, 2017 03:48 |
|
Stripped and scraped the parts eagle Took all the running gear, left the motor in it. The good eagle has almost 300k km on the trans and t-case, so a spare is a good idea. Also grabbed the rear hatch and a door, the good eagle is missing parts from that door. Out with the old, in with the slightly newer Also found this strange box in the eagle, no idea what it is but i figure its for the intermittent wipers. Bonus: draining the "oil" out of the parts eagle https://www.youtube.com/watch?v=4pgQYhrGVIY
|
# ? Nov 20, 2017 00:33 |
|
eberbs posted:Bonus: draining the "oil" out of the parts eagle Eh, throw some Seafoam in that and I bet you'd still get another hundred-thou out of it.
|
# ? Nov 20, 2017 00:42 |
|
That's a cruise control box.
|
# ? Nov 20, 2017 22:11 |
|
Was gonna say, looks like cruise or wipers, probably cruise. I hope you took the motor mounts and all the brackets off the motor... Always wondered how the front diff and motor mount to each other, allegedly it's all bolted together?
|
# ? Nov 20, 2017 23:43 |
|
eberbs posted:Bonus: draining the "oil" out of the parts eagle This confused the hell out of me until I saw it "drip". I thought it was one of those weird video-frame-rate-sync things that makes it look like helicopters can fly around without their rotors turning.
|
# ? Nov 21, 2017 01:19 |
|
The nissan shat a sparkplug out today. A trip to princess auto for the power fister repair kit. Greased up the tap and worked the hole Got the helicoil in and started her up. Ran like a bag of poo poo for a bit, probably burning off all the grease but it smoothed out. Still gotta go for a test drive but meat beaters crossed its good.
|
# ? Dec 2, 2017 22:09 |
|
eberbs posted:The truck died again a few nights ago and just would not start. towed to the dealer and they say its the low pressure fuel pump but there are none in canada so its gonna be a week or so. Old post but I once locked my keys in my Ranger not long after buying it. It had a sliding rear window so I hopped in the bed and fiddled with it for maybe 10 seconds before I had it open and could reach the keys. No tools at all.
|
# ? Dec 3, 2017 20:40 |
|
Kazinsal posted:Oh hey I didn't know there was another YYJ goon here There is at least three of us from AI in YYJ.
|
# ? Dec 4, 2017 08:08 |
|
Did a little bit on the bike today. Replaced the spark plugs and the oil filter And found a used shift lever but its ever so slightly different and doesn't look like its going to work. Also having a hard time finding a replacement fuel tank.
|
# ? Dec 6, 2017 10:29 |
|
|
# ? Jun 5, 2024 07:02 |
|
Quit my job the other day, so with my free time I decided to tackle cleaning my garage. 3 full days of busting as and its finally done. Found tons of poo poo i forgot i even had. A total of 15 good car\truck batterys 4 motor\trans 2xKa24's D21\240sx 4Age corolla 5m cressida\supra Got the tool chest all sorted out and filled with tools Actually have room to pull a car in now. And while I was taking poo poo from the garage to the dump in the noodle some guy offered me a bumper he was going to throw out. Looks like it will fit on the eagle pretty mint. Hoping to get lots done on the cars now that i have some free time.
|
# ? Dec 18, 2017 00:54 |