|
Bogatyr posted:The area is a convergence of horrible. Ticky tacky tract homes, horrible traffic, dairy farms are still around so, poop. IE heat and the 15 corridor is also where the Santa Ana winds bast drown from the Cajon Pass. Housing is also 1/2 to 1/3 the cost of neighboring Orange and LA counties so
|
# ? Dec 25, 2017 01:11 |
|
|
# ? Jun 8, 2024 08:55 |
|
Did they mean to name the community the persevere? Because either the farmer is going to make a killing or the condos are going to be sold at tax firesale prices.
|
# ? Dec 25, 2017 01:17 |
|
It's small fry compared to the regular stuff here, but I never noticed how goofy this left over tap is at my parents' place. It's too close to the wall to turn over or turn on. Laundry is right there, I guess it was on the other side of the wall before things were renovated years ago. (Or maybe this is totally reasonable, I'm no plumber)
|
# ? Dec 25, 2017 05:13 |
|
Do any of those 'upscale' houses have a garden?
|
# ? Dec 25, 2017 10:26 |
|
FCKGW posted:
Once people move in and raise enough hell over the active dairy farm, they'll get it shut down and wow, more cheap land to develop on! Depending on the state, they could incorporate the township against his wishes, create a series of zoning laws, refuse to grandfather him in, then sue for failure to comply with the laws.
|
# ? Dec 25, 2017 11:12 |
|
Living near a dairy farm was the least dystopian sounding thing about that whole mess to me. Though perhaps in america it has been industrialized to antihuman hellscape proportions than here were smaller farms are still the norm. I live around farmers myself, you smell cow dung now and then in the springs when they fertilize the fields. It's only natural, makes me feel anchored to the ground to know where the literal stuff of life comes from and that someone has to work to produce it, doesn't just appear in stores.
|
# ? Dec 25, 2017 13:00 |
|
His Divine Shadow posted:Living near a dairy farm was the least dystopian sounding thing about that whole mess to me. Though perhaps in america it has been industrialized to antihuman hellscape proportions than here were smaller farms are still the norm. I live around farmers myself, you smell cow dung now and then in the springs when they fertilize the fields. It's only natural, makes me feel anchored to the ground to know where the literal stuff of life comes from and that someone has to work to produce it, doesn't just appear in stores. Look carefully at that picture. So you see any pastures, or open areas of any significant size? It sure looks like a battery farm, ie industrialized hellscape.
|
# ? Dec 25, 2017 15:45 |
|
Humans packed up tight to each other around animals packed tight to each other, what's not to like. This is what factorylifeexistence was meant to be. Do not disparage people for the american dream.
|
# ? Dec 25, 2017 17:37 |
|
Blue Footed Booby posted:Look carefully at that picture. So you see any pastures, or open areas of any significant size? It sure looks like a battery farm, ie industrialized hellscape. I'll have your milk if you don't want any.
|
# ? Dec 25, 2017 18:04 |
|
Lord Zedd-Repulsa posted:Is there a DIY thread for small projects/questions? I need to set up a punching bag of the sort that hangs from the ceiling but have no idea how to go about doing it. Use the fix it fast thread like Dave recommended. Still, that's a pretty simple project. Here's the quick version. 1. Find a ceiling joist 2. Buy a big eye screw 3. Drill a hole into the joist from underneath 4. Screw the eye bolt into the hole. Use a big rear end screwdriver or fixed wrench to turn the eye screw. 5. Hand the bag from the eye
|
# ? Dec 25, 2017 19:31 |
|
kid sinister posted:Use the fix it fast thread like Dave recommended. Still, that's a pretty simple project. Here's the quick version. Or you get lucky like me and have a brace that the previous owner built to hold motorcycle engines.
|
# ? Dec 25, 2017 19:42 |
|
Methylethylaldehyde posted:Once people move in and raise enough hell over the active dairy farm, they'll get it shut down and wow, more cheap land to develop on! Depending on the state, they could incorporate the township against his wishes, create a series of zoning laws, refuse to grandfather him in, then sue for failure to comply with the laws. Eh, most farms in this area are voluntarily taking the multi-millions of dollars that developers are throwing at them and just moving to the Central Valley. There’s no good reason you need a dairy farm to be 30 miles from LA. This particular one just hasn’t had a good enough offer yet.
|
# ? Dec 25, 2017 20:25 |
|
kid sinister posted:Use the fix it fast thread like Dave recommended. Still, that's a pretty simple project. Here's the quick version. I thought spanning two joists was generally a good idea for heavy loads like that? Or he could get something like this, which will screw into two joists without having to mess around with any cutting/measuring.
|
# ? Dec 26, 2017 04:07 |
|
Goredema posted:I thought spanning two joists was generally a good idea for heavy loads like that? Or he could get something like this, which will screw into two joists without having to mess around with any cutting/measuring. That would be a pain the in rear end with a finished ceiling. The pivot point would be above the drywall, so you'd need a decent size hole so you aren't tearing into the ceiling with every swing. You could probably cut a smaller one if you have a bungie attached to the bottom of the bag to absorb the deflection. It's still going to be a bare hole into your attic. And if you have cellulose insulation... ugh. It would work well in an unfinished basement. Or even a drop ceiling where you could remove a single tile to hang it.
|
# ? Dec 26, 2017 04:57 |
|
Proteus Jones posted:That would be a pain the in rear end with a finished ceiling. The pivot point would be above the drywall, so you'd need a decent size hole so you aren't tearing into the ceiling with every swing. You could probably cut a smaller one if you have a bungie attached to the bottom of the bag to absorb the deflection. It's still going to be a bare hole into your attic. And if you have cellulose insulation... ugh. Yeah, it would only work in an unfinished garage or basement. With a finished ceiling, a joist-spanning sub-joist would be better.
|
# ? Dec 26, 2017 06:17 |
|
Methylethylaldehyde posted:Once people move in and raise enough hell over the active dairy farm, they'll get it shut down and wow, more cheap land to develop on! Depending on the state, they could incorporate the township against his wishes, create a series of zoning laws, refuse to grandfather him in, then sue for failure to comply with the laws. Nah, eventually the operators of the farm will decide to cash out on their own. Sell the animals and equipment at auction and the land to a developer for crazy money. It’s essentially a retirement plan for them.
|
# ? Dec 26, 2017 07:08 |
|
Goredema posted:I thought spanning two joists was generally a good idea for heavy loads like that? I tested it with over 200kg hanging off it (wanted to be sure it'd hold because I use it for a couple of cable excersizes too).
|
# ? Dec 26, 2017 13:10 |
|
Wouldn't it be better to use Z brackets so you don't put all the load on the screw threads? Or are those bolted all the way through?
|
# ? Dec 26, 2017 13:24 |
|
StormDrain posted:Nah, eventually the operators of the farm will decide to cash out on their own. Sell the animals and equipment at auction and the land to a developer for crazy money. It’s essentially a retirement plan for them. Oh, eventually that always happens, but sometimes it doesn't happen fast enough for the tastes of the people smelling cow poo poo all day.
|
# ? Dec 26, 2017 21:36 |
|
Methylethylaldehyde posted:Oh, eventually that always happens, but sometimes it doesn't happen fast enough for the tastes of the people smelling cow poo poo all day. People. What a bunch of bastards.
|
# ? Dec 26, 2017 23:58 |
|
Collateral Damage posted:Wouldn't it be better to use Z brackets so you don't put all the load on the screw threads? Or are those bolted all the way through?
|
# ? Dec 28, 2017 02:27 |
|
Blue Footed Booby posted:Look carefully at that picture. So you see any pastures, or open areas of any significant size? It sure looks like a battery farm, ie industrialized hellscape. Industrial hellscape that smells like cow piss. Which you can detect from the highway a half mile away with your windows up and A/C on. Collateral Damage posted:Wouldn't it be better to use Z brackets so you don't put all the load on the screw threads? Or are those bolted all the way through? #14 screw fails at 1390lb in shear in wood (against 14ga galvy steel) according to first source in google, 1277lb in tension. Multiply by 8. Seems good enough. Value Engineering says he probably could have gotten away with #2 screws 3/4" long if he just wanted a 100% safety factor, instead of 2500%.
|
# ? Dec 28, 2017 04:36 |
In (presumably) fir, I'd expect the screw to wiggle around, egg out the hole, and pull out long before the steel failed. Heavy punching bags aren't a static load. Disclaimer: I don't build houses; I do build wood furniture around heavy live loads like that. This may or may not be code compliant but it'd be strong as poo poo. If I was gonna hang a heavy bag there it'd be a flat 2x6 on top of 4 beams (joists?), with stacked flat 2x6 filling the air gap between that and the drywall, all screwed together with big rear end wood/decking screws (like these but 5"), with a fat eye bolt through the whole thing. Like this: I would also remove that 2" circle of drywall (I forgot to in the illustration) so the bolt is clamping down on solid wood; that spot is gonna get annihilated and need a patch if you move out, regardless. This spreads out the possibly 200+ pounds of swinging bag across four beams and all the screws + stacked pieces wedge the whole thing in there as tight as possible to prevent it twisting things apart up where you can't see it. I might even use structural lags (example: here) instead of decking screws, but I don't know if that many quarter inch holes would adversely affect the strength of the joists, especially the middle two; decking screws don't worry me there.
|
|
# ? Dec 28, 2017 06:20 |
|
Javid posted:.
|
# ? Dec 28, 2017 21:44 |
Slugworth posted:You sure do. I have built essentially the thing I diagrammed up there for people. It works.
|
|
# ? Dec 28, 2017 22:08 |
|
Javid posted:In (presumably) fir, I'd expect the screw to wiggle around, egg out the hole, and pull out long before the steel failed. Heavy punching bags aren't a static load. I guess it's probably worth revisiting once I've got time. Part of the problem is that I threw this up in a couple of hours and local hardware store didn't have eyebolts that were any longer than the one I used (as you can see I had JUST enough thread to put 2 nuts on end) and that meant timber piece had to be pretty much right up against the plaster. Javid posted:I would also remove that 2" circle of drywall (I forgot to in the illustration) so the bolt is clamping down on solid wood; that spot is gonna get annihilated and need a patch if you move out, regardless. Edit: just a thought - what if I added another timber piece that sat atop the joists and used steel plate to brace the two together (screws would be used for this but they'd be in sheer, at least 4 screws per piece of timber on each side) would you see the holes ovalling out enough to matter anytime soon? Fuzz1111 fucked around with this message at 03:03 on Dec 29, 2017 |
# ? Dec 29, 2017 02:46 |
|
Javid posted:
There's a saying around engineering schools: Anyone can build a bridge to take a 10-ton load. Only an engineer can design-build a bridge that can take AT MOST a 10-ton load. If you just overbuild the rear end out of something, it's possible that you're at 5% of max loading of every component and you'll never know because it'll never fail. If you go do the math on some stuff and find out that (engineering wise) you really only need eight screws and four l-brackets to have a 300% safety factor, then you just saved yourself maybe a couple of bucks in hardware. Moral: For homeowners and DIYers, go crazy; you're building one, and build it to never, ever, ever fail. The difference in cost is negligible.
|
# ? Dec 29, 2017 04:57 |
Me, I just call that "overkill is underrated".
|
|
# ? Dec 29, 2017 06:25 |
|
Why why why would you try and use this as a kitchen sink? It's supposed to be a bar sink/wine cooler
|
# ? Dec 29, 2017 08:08 |
|
A house made out of windshields. and shipping containers? kid sinister fucked around with this message at 09:41 on Dec 29, 2017 |
# ? Dec 29, 2017 09:39 |
|
Is that a set of blinds mounted externally?
|
# ? Dec 29, 2017 14:07 |
|
Youth Decay posted:Why why why would you try and use this as a kitchen sink? That doesn't look like it's placed in a kitchen to me. Looks like a sink in the bathroom of a bar or restaurant.
|
# ? Dec 29, 2017 15:17 |
|
https://i.imgur.com/DkrSsRg.gifv
|
# ? Dec 29, 2017 15:28 |
|
There's a dish brush and soap for dishes there, which suggests it's a kitchen. I can't understand why anyone would possibly want to wash dishes in a sink that small though, plus the handwipes are a bit strange.
|
# ? Dec 29, 2017 15:32 |
|
Between the wipes and soap dispenser, I would say a recently remodeled office kitchenette. They probably said "we want a little sink here" and they got that.
|
# ? Dec 29, 2017 17:03 |
|
Ruflux posted:There's a dish brush and soap for dishes there, which suggests it's a kitchen. Not really, it only suggest they might clean dishes off wherever that is. Could be a secondary eating area, that could be neat on my patio where sometimes i need to wash off a dish that had raw meat on it to put the cooked meat back onto.
|
# ? Dec 29, 2017 17:17 |
|
The Dave posted:Not really, it only suggest they might clean dishes off wherever that is. Could be a secondary eating area, that could be neat on my patio where sometimes i need to wash off a dish that had raw meat on it to put the cooked meat back onto. I'd rather have a regular bar sink that you could at least get your hand into to wash off.
|
# ? Dec 29, 2017 18:02 |
|
The Dave posted:Not really, it only suggest they might clean dishes off wherever that is. Could be a secondary eating area, that could be neat on my patio where sometimes i need to wash off a dish that had raw meat on it to put the cooked meat back onto. While the things you say are plausible, but Occam's Razor and being aware of general human ignorance tells me that's used as a kitchen sink.
|
# ? Dec 29, 2017 18:11 |
|
Goddamn, this precisely reflects my home-ownership experience.
|
# ? Dec 29, 2017 18:20 |
|
|
# ? Jun 8, 2024 08:55 |
|
Yeah there's an invisible leak somewhere in my heating system and that's a little too close to home.
|
# ? Dec 29, 2017 18:46 |