|
Foam is significantly cheaper and easier to repair after a crash. EPP in particular does not crush, and can be glued together incredibly easily. Also if you laminate EPP, it becomes pretty indestructible: https://www.youtube.com/watch?v=HgGtMrgPgR8
|
# ? Mar 29, 2018 19:41 |
|
|
# ? May 13, 2024 11:27 |
|
Yeah, balsa planes just explode in a crash into tiny toothpick-like shreds. Foam planes essentially bounce, maybe crack in a few big chunks that you can stick back together with spray glue in 30 seconds.
|
# ? Mar 29, 2018 20:43 |
|
The Dregs posted:I assumed the balsa were more sturdy than the foam kits. Did I have it backwards? Plus they're really fun to build, at least the rubber band ones. e: https://www.youtube.com/watch?v=8yf_QTbDeWM&t=107s evil_bunnY fucked around with this message at 21:04 on Mar 29, 2018 |
# ? Mar 29, 2018 20:55 |
|
Balsa sounds way more fun tbh.
|
# ? Mar 30, 2018 00:26 |
Lmao no, epp is the poo poo.
|
|
# ? Mar 30, 2018 00:40 |
|
I believe that the foam is probably the better idea, but we really enjoy the meddling easiest of making balsa planes. Is there anything more sturdy that offers that kind of fun?
The Dregs fucked around with this message at 00:58 on Mar 30, 2018 |
# ? Mar 30, 2018 00:49 |
|
Double phone postin'
|
# ? Mar 30, 2018 00:57 |
|
The Dregs posted:I believe that the foam is probably the better idea, but we really enjoy the meddling easiest of making balsa planes. Is there anything more sturdy that offers that kind of fun? Watch Peter Sripol on youtube and start thinking about the things you can make out of dollar store foam core instead: https://www.youtube.com/watch?v=i7X5Zp1lgBM Once you get a simple fixed wing down, you can start seeing how far you can push the design bring back old gbs fucked around with this message at 01:20 on Mar 30, 2018 |
# ? Mar 30, 2018 01:16 |
|
Balsa models are perfectly viable and can be very beautiful too. However, as mentioned above, when you crash them, you end up with toothpicks. I've flown my EPP planes into solid metal objects at 100km/h, picked them and tossed them back into the air. It really depends on what type of flying you wan to do. https://www.youtube.com/watch?v=HSPeWZENlUg
|
# ? Mar 30, 2018 01:32 |
Like literally buy a cth albatross
|
|
# ? Mar 30, 2018 02:41 |
|
Google Butt posted:Lmao no, epp is the poo poo. The Dregs posted:I believe that the foam is probably the better idea, but we really enjoy the meddling easiest of making balsa planes. Is there anything more sturdy that offers that kind of fun? evil_bunnY fucked around with this message at 10:04 on Mar 30, 2018 |
# ? Mar 30, 2018 10:00 |
|
I found a series of videos on youtube for building a little foam board plane called the RC-help trainer. They are exhaustive, he even tells you how to save and print the file and what a glue gun is. I think this will be a decent intro for my son and me, since we know almost nothing about planes or RC in general. After that we can try something a little more daring.
|
# ? Mar 30, 2018 12:14 |
|
If you want something a bit more turn-key you can get a flite test foam trainer kit and a power pack. Then you just need a radio and receiver.
|
# ? Mar 30, 2018 15:17 |
|
evil_bunnY posted:If you want something a bit more turn-key you can get a flite test foam trainer kit and a power pack. Then you just need a radio and receiver. Seconding this, the tiny trainer might be a good place to start. If you want to go from a peice of foam board to a plane, they also provide free Plans for most (all?) of their foamboard designs.
|
# ? Mar 30, 2018 19:22 |
|
I'd love to get a Flite Test, if every goddamned thing in their store weren't out of stock. The have the base kits, but all the accessories are out.
|
# ? Apr 2, 2018 01:31 |
|
I’m sure someone here could put an electronics kit together for you. What stores are convenient for you to order from? Do you have a radio yet?
|
# ? Apr 2, 2018 10:14 |
|
There is a Hobbytown right by here, and they stock Flite Test stuff on their website, although I have no idea if they have it in-store. I am going to go by there today. Thanks!
|
# ? Apr 2, 2018 12:16 |
|
Well, that turned out to be a huge waste of time. The guy who ran the RC department was at the local hobby store was a huge pedantic douche. The place stocked Flite Test stuff, but I'll be damned if I give them money. So if you guys have the time to help me pick out a complete set of stuff I need to get footing, if appreciate it. From the site, my son and I really liked the 3 planes in one set (nutball, flyer and Delta), and we also looked a lot of the mini diy stuff.
|
# ? Apr 2, 2018 19:46 |
|
Are you starting completely from scratch? I'll see if I can't get a shopping list done tonight.
|
# ? Apr 2, 2018 20:58 |
|
Yeah. I got a message from Flite Test, they said that the DXE-6 kits will be in stock today, but not the DXE kits. I think the 6 kits are like 100 more. I think i can get everything from their site and pick up that transmitter elsewhere, right? Either way, thanks!
|
# ? Apr 2, 2018 21:02 |
|
I put together a B power pack in this thread a few months ago, let me find it. edit: if you are looking for just a transmitter and receiver, then I'd get the FlySky i6 FS-i6 on the cheapest end, or a frsky qx7 on the higher end (along with a d4r-ii or x4r receiver) moron izzard fucked around with this message at 21:19 on Apr 2, 2018 |
# ? Apr 2, 2018 21:14 |
|
How diy-savvy are you? Can you solder? A Taranis QX7 radio is far more versatile but can be more tricky to get set up...but you wont outgrow it. Basically, how much trial and error can you put up with before you get frustrated?
|
# ? Apr 2, 2018 21:19 |
Seriously consider a qx7 and the crashtesthobby albatross (3 channel) if this is for your kid. It's durable as poo poo and you can fly it with one hand in a lawn chair with a beer in your hand
|
|
# ? Apr 2, 2018 21:26 |
|
moron izzard posted:I put together a B power pack in this thread a few months ago, let me find it. This is great. So, this will work for whatever calls for a B pack from flite test? Which store would you recommend? As for DIY savvy, I am pretty handy, but I know very little about electronics in general. Closest I have ever done is mod Nerf guns. I will check out the albatross and the other transmitter.
|
# ? Apr 2, 2018 21:30 |
|
Google Butt posted:Seriously consider a qx7 and the crashtesthobby albatross (3 channel) if this is for your kid. It's durable as poo poo and you can fly it with one hand in a lawn chair with a beer in your hand Crashtesthobby stuff is pretty great if you're interested in durable EPP planes. The one thing I will mention is that they give you a piece of string to wrap around their flying wings for reinforcement and suggest coating it in corn starch (flower? I don't remember exactly) to act as an accelerator for the superglue. They warn there will be fumes and you should do it somewhere well ventilated, DO NOT IGNORE THIS ADVICE. I've never seen CA glue set that fast or give me a headache so quickly. We had to open the garage and let it sit for 15 minutes.
|
# ? Apr 2, 2018 21:38 |
|
The Dregs posted:This is great. So, this will work for whatever calls for a B pack from flite test? Which store would you recommend? As for DIY savvy, I am pretty handy, but I know very little about electronics in general. Closest I have ever done is mod Nerf guns. I will check out the albatross and the other transmitter. This is all on banggood. I'll have to see if any of this is out of stock though. The ESC was last time (but is easily swappable) edit: there are some 20a esc with BEC which are slightly cheaper. You'll need to solder an xt60 plug onto them however. moron izzard fucked around with this message at 21:44 on Apr 2, 2018 |
# ? Apr 2, 2018 21:39 |
|
I checked out the albatross, and it is cool. But for some reason the shipping is 60-100 dollars?! Is that right?
|
# ? Apr 2, 2018 22:53 |
The price in the drop down menu includes shipping, $91.95
|
|
# ? Apr 2, 2018 23:05 |
|
Ah OK. Jeez.
|
# ? Apr 2, 2018 23:24 |
|
I see what you guys mean about balsa. Been working on this Guillows kit and holding back tears of frustration (and pain from the lovely sewing pins I used) the whole time. And I know drat well it'll be nothing but toothpicks after it's maiden flight.
|
# ? Apr 4, 2018 15:26 |
|
The Dregs posted:I see what you guys mean about balsa. Been working on this Guillows kit and holding back tears of frustration (and pain from the lovely sewing pins I used) the whole time. And I know drat well it'll be nothing but toothpicks after it's maiden flight. https://store.flitetest.com/ft-spitfire-speed-build-kit/
|
# ? Apr 4, 2018 15:43 |
|
I'm getting one of those! But, I bought this Guillows kit before I ever came to this thread. I am off for a week, and I might as well do this while I wait for shipping. Right now I am trying to decide between a pair of mini Sparrows, or the triple kit with the Nutball and the other two.
|
# ? Apr 4, 2018 15:48 |
|
The Dregs posted:I see what you guys mean about balsa. Been working on this Guillows kit and holding back tears of frustration (and pain from the lovely sewing pins I used) the whole time. And I know drat well it'll be nothing but toothpicks after it's maiden flight. Get some t-pin instead. Much easier on the fingers.
|
# ? Apr 4, 2018 16:43 |
|
The Dregs posted:I'm getting one of those! But, I bought this Guillows kit before I ever came to this thread. I am off for a week, and I might as well do this while I wait for shipping.
|
# ? Apr 4, 2018 17:10 |
|
I figured the glue out on my own. I couldn't find T-pins anywhere, I did find a thimble, though. It also took me forever to realize you can pin through the wood, instead of just holding it in place.
The Dregs fucked around with this message at 18:55 on Apr 4, 2018 |
# ? Apr 4, 2018 17:19 |
|
The Dregs posted:I'm getting one of those! But, I bought this Guillows kit before I ever came to this thread. I am off for a week, and I might as well do this while I wait for shipping. The FT Sparrow flies strangely, I wouldn't recommend it for beginners.
|
# ? Apr 5, 2018 09:54 |
|
Does anyone know if the dronin auto tune stuff works on a tricopter? I'm throwing some old spare motors and electronics into a tri frame I 3d printed and might give dronin a go if so. I need to check if it requires the servo be digital though.
|
# ? Apr 5, 2018 18:18 |
|
A bunch have been using it on tricopters successfully. Apparently the stock firmware and some out-of-tree branch with tricopter specific changes (haven't really kept up with that one). https://forum.dronin.org/forum/d/365-trironin-tricopters-running-dronin/118
|
# ? Apr 5, 2018 18:23 |
|
Has anyone had the chance to play with a Tello yet? It seems like a pretty nifty little drone for $99.
|
# ? Apr 5, 2018 22:28 |
|
|
# ? May 13, 2024 11:27 |
|
I've been tempted to grab one just to see but haven't brought myself to do it.
|
# ? Apr 6, 2018 01:24 |