|
opengl128 posted:Correct, it's just dry dust. I ran my finger over a small spot and it wiped off easily so it's not bonded to the paint or anything. Dry concrete dust is no issue. Concrete is only an issue as it's curing. Just wash with plenty of water and it'll rinse right off, with a microfiber mitt if necessary. As with anything -- the sooner, the better.
|
# ? Nov 23, 2019 00:07 |
|
|
# ? May 27, 2024 03:58 |
|
That makes me feel better, thanks. Stinks I have no way of addressing it until after Thanksgiving but oh well. New driveway rules though.
|
# ? Nov 23, 2019 00:34 |
|
With Black Friday here, I figure now is a good time to build up a beginner's kit. https://www.amazon.com/Chemical-Guy...163&sr=8-3&th=1 or this one: https://www.amazon.com/Polisher-Dua...customerReviews I'm in that space where I want to get good value items but I don't want to splurge until I know that I'll actually enjoy detailing. Hughmoris fucked around with this message at 05:22 on Nov 29, 2019 |
# ? Nov 29, 2019 05:17 |
|
Griot's Garage's new G9 DA polisher has been getting rave reviews. Can pick it up pretty cheap with 25% off. Autogeek Coupon code: DEALS25
|
# ? Nov 29, 2019 23:00 |
|
Etrips posted:Griot's Garage's new G9 DA polisher has been getting rave reviews. Can pick it up pretty cheap with 25% off. Hmm. Not letting me apply DEALS25 to it.
|
# ? Nov 30, 2019 04:44 |
|
Finally got around to removing the little dealer sticker from the back of the car - I'd been dreading having to sit there and slowly heat it up, work some fishing line under it, then get the leftover adhesive off... I heated up one end gently for about 30 seconds, lifted a corner, and the whole thing peeled off cleanly
|
# ? Nov 30, 2019 05:41 |
|
Sometimes you get lucky.
|
# ? Nov 30, 2019 15:34 |
|
The paint is bubbling up on this aluminum panel under the rear window. The affected area is about 7" wide. From reading about mustang hoods that have similar trouble, seems like the correct thing to do is to remove the paint and corrosion underneath, then prime and paint. This seems like a really big area to try to do touchup paint on. Any other options? If I don't do anything, will I destroy this section if I try to compound/polish this panel with a dual action?
|
# ? Dec 6, 2019 23:21 |
|
taqueso posted:The paint is bubbling up on this aluminum panel under the rear window. The affected area is about 7" wide. From reading about mustang hoods that have similar trouble, seems like the correct thing to do is to remove the paint and corrosion underneath, then prime and paint. This seems like a really big area to try to do touchup paint on. Any other options? How old is the car? That's exactly the type of paint defects that can be covered by warranties. So before you touch it, research it / have a dealer check it. But yeah, there is a big risk that polishing it will make the bubbling lift.
|
# ? Dec 7, 2019 05:23 |
|
2004 Volvo XC90, I doubt there is any warranty left unless this is somehow special
|
# ? Dec 7, 2019 05:27 |
|
taqueso posted:The paint is bubbling up on this aluminum panel under the rear window. The affected area is about 7" wide. From reading about mustang hoods that have similar trouble, seems like the correct thing to do is to remove the paint and corrosion underneath, then prime and paint. This seems like a really big area to try to do touchup paint on. Any other options? Leave it until you can't stand it anymore. As soon as the paint breaks, the corrosion will accelerate. If you want to try to repair it yourself, keep in mind that when you sand, the area will be 3 times the size of the bubbles you see. Also keep in mind that silver is impossibly hard to spot paint. Basically, you're boned.
|
# ? Dec 7, 2019 14:08 |
|
I guess the good news is that I can buy that panel on ebay for < $100. I think I'll wait on that a minute, though, I've been spending enough money on other car stuff.
|
# ? Dec 7, 2019 18:32 |
|
havent washed my car aside from rain in about a year, havent waxed it in two, before that i was pretty good about keeping up with it. but you know, new cars accumulate scratches and curb rash and a dent from a stray bullet and they just become normal rear end cars and you lose the drive to keep em shiny. but i'm forced by circumstance to move back to suburbia where people give a poo poo what your car looks like so i'm contemplating doing a thorough touch-up and detail. is there a recommended brand of touch-up paint? recommended method? some are small enough i could probably get away with just touching em up with a simple all-in-one but a few are deffo going to need some sanding and spraypaint at least. most of the scratches and rash are on the plastic bumper cover so rust is no concern. also the aforementioned bullet dent will need to get repaired. i've just had it covered with a piece of electrical tape for years the car's black and it wasn't rusting under there so my attitude was gently caress it for the time being). should I try pulling it at all? just fill it with bondo? or epoxy in a screen and then bondo over that? the dent's about an inch wide, half an inch deep, and is right on a crease in the sheet metal, on the unibody, above one of the doors
|
# ? Dec 8, 2019 05:42 |
|
Winter question. Southern Ohio so not soul crushingly cold but below freezing most nights. Birds have decided to poo poo all over my car. Running it through a touchless car wash didn't get it all off. Best way to deal with that without hurting the paint? IDC what it looks like mid winter but iirc leaving it on hurts the paint too. I've got a garage, but not one I could properly wash a car in. Car wash is about a quarter mile from where I live so short drive from soapy rinse to ???
|
# ? Dec 14, 2019 03:56 |
|
Try a soft cloth car wash. Even though the can potentially be (there is) poo poo stuck in the brushes that can harm your paint, I still prefer the soft cloth washes because they actually seem to get the road film off my car, something that the touchless washes can never seem to do. Particularly on my fuckin windows.
|
# ? Dec 14, 2019 15:48 |
|
honda whisperer posted:Birds have decided to poo poo all over my car. Running it through a touchless car wash didn't get it all off.
|
# ? Dec 14, 2019 16:39 |
|
TheGoatTrick posted:Put a microfiber towel over the spot, pour hot water on it, let sit for a few minutes. This will soften it and it should easily wipe away. Or just spray water on it and wipe it off with a microfiber. It's bird poo poo, a very common issue. Hell, I've got a crabapple poo poo on my Escalade right now and I'll get to it in the next couple days, and it'll be fine. The only time you really have to worry is during hot weather when the sun really bakes paint. Then it can more easily stain, but even then, it almost always buffs out.
|
# ? Dec 14, 2019 16:52 |
|
This time of year, I just kind of let it go. I'll deal with it in the Spring. Too loving cold to be out there.
|
# ? Dec 14, 2019 18:23 |
|
Thanks, I went for letting it soak and wiping it off. Figured if it would be worth seeing if there was some neat trick.
|
# ? Dec 14, 2019 20:09 |
|
Time for some new towels as mine are getting pretty tired. Any suggestions? I don’t need anything pricey since both my vehicles are 150k+ mile DD’s but the ability to choose colors would be a plus.
|
# ? Dec 15, 2019 05:10 |
|
Arson Daily posted:Time for some new towels as mine are getting pretty tired. Any suggestions? I don’t need anything pricey since both my vehicles are 150k+ mile DD’s but the ability to choose colors would be a plus. Kirkland micrfibers, unless they've changed the formula. Really great for the cost.
|
# ? Dec 15, 2019 06:16 |
|
Arson Daily posted:Time for some new towels as mine are getting pretty tired. Any suggestions? I don’t need anything pricey since both my vehicles are 150k+ mile DD’s but the ability to choose colors would be a plus.
|
# ? Dec 15, 2019 17:55 |
|
MrOnBicycle posted:Kirkland micrfibers, unless they've changed the formula. Really great for the cost. Those are really great. After looking at them for a long time I pulled the trigger on them when they were on sale, 36 for $14ish! And I'm impressed by the size and quality. It's especially nice having a basically unlimited stack of towels, far more than I use for any one detail.
|
# ? Dec 15, 2019 18:13 |
|
How do you guys keep your microfibers from spreading dust? The first use is great, but even after washing, subsequent uses leaves a layer of dust esp on windows.
|
# ? Dec 15, 2019 18:45 |
|
I bought a brand new car that had been sitting on the dealer lot for a year. Coated it this weekend and used an iron remover during prep. Had to do three passes with the iron remover, but it saved a ton of time and effort when I clayed it later.
|
# ? Dec 16, 2019 00:22 |
|
TheGoatTrick posted:I bought a brand new car that had been sitting on the dealer lot for a year. Coated it this weekend and used an iron remover during prep. Had to do three passes with the iron remover, but it saved a ton of time and effort when I clayed it later. What iron remover did you use? I bought a bottle of the Meguiar's Mirror Bright wheel cleaner from a local Pepboys for, I want to say $6, that had a iron removing formula. I think the price was pretty good in comparison to other wheel cleaners I've used, but I only got 3-4 car washes out of it and I can't find it stocked locally anymore. I had read about using it to clean paint, but there wasn't enough volume to try it on that.
|
# ? Dec 16, 2019 03:46 |
|
I think if you're planning on using it regularly for an entire car you're much better off buying in bulk and diluting yourself in one of those pressurized sprayers.
|
# ? Dec 16, 2019 04:25 |
|
It must be possible to get whatever chemical it is cheaper than as part of a car product. Iron-X and Sonax Wheel Cleaner both have the same smell and they all seem to turn the same color. Both of those worked well but were expensive.
|
# ? Dec 16, 2019 05:16 |
|
Meguiars Ultimate wheel cleaner can used as iron decon, it's safe to use on the whole car, and it's relative cheap and can be bought just about anywhere.
|
# ? Dec 16, 2019 05:27 |
|
There's some sold in bulk here https://www.autogeek.net/iron-removers.html
|
# ? Dec 16, 2019 06:32 |
|
MetaJew posted:What iron remover did you use? I bought a bottle of the Meguiar's Mirror Bright wheel cleaner from a local Pepboys for, I want to say $6, that had a iron removing formula. I think the price was pretty good in comparison to other wheel cleaners I've used, but I only got 3-4 car washes out of it and I can't find it stocked locally anymore. Car turned out pretty nice. After the iron remover, I used Griot's BOSS Correcting Cream and an orange pad for correction. The car was then coated with my favorite ceramic combo- one coat of Gtechniq Crystal Serum Light and two coats of Gtechniq Exo. This is supposed to be my daily driver that I don't have to put too much effort into. Oops. TheGoatTrick fucked around with this message at 07:04 on Dec 16, 2019 |
# ? Dec 16, 2019 06:56 |
|
Nothing wrong with taking care of a daily. Looks great!
|
# ? Dec 16, 2019 08:27 |
|
Goober Peas posted:How do you guys keep your microfibers from spreading dust? The first use is great, but even after washing, subsequent uses leaves a layer of dust esp on windows. this sounds like you store them somewhere that they can collect a lot of dust. i've washed mine dozens of times and they still work great
|
# ? Dec 16, 2019 16:34 |
|
TheGoatTrick posted:shiny Accord
|
# ? Dec 16, 2019 17:05 |
|
Okay so who's dropping a small pinch of grit and tiny sticks into the dryer when I wash my microfibers...
|
# ? Dec 23, 2019 00:12 |
|
How up to date is the OP? I'm in need of some interior cleaning advice. I have an '08 Honda Civic and two main cleanliness issues I want to correct. 1.) I have two kids now. Spillages happen and I don't want to take it to a detailer every time I need the milk shampooed out of the back seat. So some form of shampoo/steamer/whatever for cleaning it out would be awesome. Something that can get into tight spaces would be a plus. Found some veggie pouch spilled down and into the crevice of the back seats. Yay. 2.) The second is that the back doors have recently started leaking. It'll be fixed this weekend, but I went through several trials of a heavy rain -> soaked back floorboard -> mildew smell the next morning ->shop vac'd the water up. I'd like to give the back carpet a goooood thorough cleaning to make sure I've killed any mold or whatever that's growing under it back there. I saw the Ozone generator in the OP. Is that still a good idea in conjunction with cleaning it up?
|
# ? Jan 7, 2020 23:24 |
|
BonoMan posted:How up to date is the OP? 1) I've been through 2 kids and have never had any type of spill that's needed equipment to clean up. Not kink shaming, just saying that monster messes are not inevitable with kids. 2) Do you have a sunroof? Much more probable that a sunroof is leaking instead of doors. If it's enough that water is pooling in the footwells, then you've got a serious water incursion issue. Check Sunroof Drains. Check windshield seal. Try to find out the point where the water is showing -- high / medium / low, then track it down from there. That could be a major problem with a simple fix.
|
# ? Jan 7, 2020 23:49 |
For 1) I use the $60-$80 spot cleaners. Bissell, etc. Most important thing to do is to hit it with an APC or upholstery cleaner and agitate with a brush or the wand on your spot cleaner. I like the white drill brush with a citrus cleaner or simple green. Then extract; multiple passes if needed. For 2) I'd use chlorine, bleach, or APC to kill and break up any mold and odors and extract similar to above. If there's any remaining odors you can treat the whole car with a ozone, yes. Chunjee fucked around with this message at 00:07 on Jan 8, 2020 |
|
# ? Jan 7, 2020 23:54 |
|
meatpimp posted:1) I've been through 2 kids and have never had any type of spill that's needed equipment to clean up. Not kink shaming, just saying that monster messes are not inevitable with kids. Nothing monster. Just some discoveries of spilled milk and veggie pouches etc, that need more than a wet paper towel to clean up. Not saying I need like... some sort of angle grinder. Just not sure what beyond a wet rag most people use to get that kinda stuff out. Also just looking out for the future to have stuff on hand in case something monster DOES come along. I'd like to be able to resell my car without having to hide giant vomit stains. quote:
I don't have a sunroof. I've already identified it (hence me saying I was going to fix it this weekend). It was a two fold problem, dry rot in the seals on the back windows (not the inner seal, but the exterior blade seal on the actual window) and the plastic water seal on the actual interior of the door has come un-epoxied. I actually took the entire door apart to find this out and then ran my own tests by pouring water into the window to follow it and sure enough it was running out through the door into the back floorboards (as well as through the appropriate drain). When I first encountered the problem *only* the back floorboards were wet and nothing else so that let me identify the problem pretty quickly. Chunjee posted:For 1) I use the $60-$80 spot cleaners. Bissell, etc. Most important thing to do is it it with an APC or upholstery cleaner and agitate with a brush or the wand on your spot cleaner. I like the white drill brush with a citrus cleaner or simple green. Then extract; multiple passes if needed. Awesome thanks!
|
# ? Jan 7, 2020 23:58 |
|
|
# ? May 27, 2024 03:58 |
Oh and like any cleaning chemicals it's a good idea to use a test spot and make sure you dont cause discoloration. Probably don't want to run bleach at full strength. Try a 50/50 water dilution to start with.
|
|
# ? Jan 8, 2020 00:12 |