|
The Pentel orenz Nero comes in .3 and .2mm sizes and automatically advances the lead because the little pipette around the lead is always in contact with the paper. It's like a fountain pen that uses lead instead of ink and I like mine better than my rotring 600 .3mm
|
# ? Jul 10, 2020 04:44 |
|
|
# ? Jun 3, 2024 22:33 |
|
Arcsech posted:
Seconding the graphgear recommendation, it's a wonderfully solid-feeling pencil, and having the whole thing, including the lead pipe retract is a real nice touch (and it makes a nice click as it does so) f.e. Graphgear 1000, not the regular graphgear/500. I'm sure they're fine, but the 1000's really nice. However, I've never actually gotten a kuru toga to really rotate. I assume this is because I write in cursive (and with a light touch), and it seems to rely on the lead making repeated contact with the paper to rotate the little barrel inside. I'm sure it works fine if you're writing in various characters, or drawing, or using block letters, but in my hands, it's just a regular-rear end mechanical pencil. However, I've got one of the cheaper versions of it, and it's really astonishing how solid that plastic feels, compared to one of those regular bic or papermate pencils. That said, the eraser's almost definitely going to be sorta bad, will definitely be tiny, and in most pencils is under a little cap, which makes actually using it a pain. Definitely grab an eraser if you're in the habit of erasing things instead of just crossing them out. Hats Wouldnt Fly posted:The Pentel orenz Nero comes in .3 and .2mm sizes and automatically advances the lead because the little pipette around the lead is always in contact with the paper. It's like a fountain pen that uses lead instead of ink and I like mine better than my rotring 600 .3mm Do those work well? I've seen them when idly browsing jetpens and the idea seems neat, but the tiny lead feels like it would break constantly, or be too light to actually read, unless you used a real dark lead.
|
# ? Jul 10, 2020 07:17 |
|
Arcsech posted:
I'll happily third the GraphGear 1000. I've tried a lot of mechanical pencils, and for me it's just the right weight while feeling really solid. And the click of the retracting lead tube is really goddamn satisfying.
|
# ? Jul 10, 2020 09:45 |
|
Zenostein posted:Do those work well? I've seen them when idly browsing jetpens and the idea seems neat, but the tiny lead feels like it would break constantly, or be too light to actually read, unless you used a real dark lead. The lead's super delicate and will break easily during loading, or if you drop the thing, but it's protecting while you write by a lead sleeve. You'd have to bend that to break the lead. I love the thing. .3 might be a better buy than .2 if you're worried about it writing too lightly, but I gotta have the finest point. I also love that I only ever have to click it once. My only complaint is it's not all metal like a rotring. Here's a short video I found that shows it off. https://www.youtube.com/watch?v=52zfGiyzYxs&t=51s
|
# ? Jul 10, 2020 18:07 |
lots of 2mm lead holders out there, pretty much all have a nice heavy-dutyness about them. I have a staedler one with a little indicator you can move to keep track of what hardness of lead is in it
|
|
# ? Jul 10, 2020 23:33 |
Thanks, now I've got a nearly all-metal combination mechanical pencil/stylus in the mail Don't know how often it'll be used for drafting but having more than one function and having the fiddly bit collapsible is everything I didn't realize was available in mechanical pencils and fully justifies the purchase in my eyes. Already have some proper erasers anyway for earlier and much cheaper mechanical pens lost to the ages. And $40 shipped for the Rotring 800+ and some lead is less than I usually spend at once for pen stuff
|
|
# ? Jul 11, 2020 08:38 |
|
The pencil world is light-years away from the fountain pen world in terms of accessibility
|
# ? Jul 11, 2020 09:21 |
Please no one start talking about artisinal pencil leads Or do, if there's some obscure super dark .43mm that's silky smooth, that'd be interesting Ask me about refillable writing utensils: No Ballpoints /e I'm sticking to 0.5mm because I like how it looks and hadn't noticed the advances in precision and protection which scare me as just another mechanism to fail especially that rotating mechanism one even though I'll probably order one within the month since lol cursive is the thing it's bad at and why would anyone use a pencil for cursive except as practice anyway? stringless fucked around with this message at 09:43 on Jul 11, 2020 |
|
# ? Jul 11, 2020 09:33 |
|
FFT posted:Thanks, now I've got a nearly all-metal combination mechanical pencil/stylus in the mail but it's a Kuru Toga and a Pilot MR2 (the Euro Metro). FFT posted:Please no one start talking about artisinal pencil leads Let me tell you about the Pentel C275-HBO AIN STEIN fine lead which has a ceramic beehive structure, making it one of the strongest in the world.
|
# ? Jul 11, 2020 10:15 |
gschmidl posted:Let me tell you about the Pentel C275-HBO AIN STEIN fine lead which has a ceramic beehive structure, making it one of the strongest in the world. Joke's on them, I no longer consider lead strength Also carbon naturally has a beehive structure, how is it different for being ceramic anyway /e 10% better at not breaking compared to similar? MEH fancy silicate additions for generic mechanical pencils stringless fucked around with this message at 12:04 on Jul 11, 2020 |
|
# ? Jul 11, 2020 11:56 |
Now I'm just imagining all of the unfortunate failures at Pilot of making a VP/capless that also functions as a stylus Hire me, Pilot! I'll tell you how you should use the thruster as the stylus tip! And I won't make jokes about it.
|
|
# ? Jul 11, 2020 12:10 |
|
FFT posted:Joke's on them, I no longer consider lead strength Also it's called friggin' Einstein.
|
# ? Jul 11, 2020 12:43 |
|
I probably have over three dozen barely used tubes of leads from trying them out to find the combination of feel and darkness that I wanted. My favorite nice mechanical pencil I have is my Modern Fuel in titanium with a .05mm mechanism; the mechanisms are made in house out of metal and are user replaceable. That said I also like my Studio Ghibli collaborations with Uni Kuru Toga (Castle in the Sky) and Zebra Del guard (Totoro). I don’t like Retro 51’s pencil. The 1.15mm lead size is odd and their lead is not that good.
|
# ? Jul 12, 2020 00:42 |
The Electronaut posted:My favorite nice mechanical pencil I have is my Modern Fuel in titanium with a .05mm mechanism; the mechanisms are made in house out of metal and are user replaceable. 0.05mm would be a hell of a pencil and now I'm just imagining an 11.5mm lead
|
|
# ? Jul 12, 2020 11:27 |
|
FFT posted:0.05mm would be a hell of a pencil and now I'm just imagining an 11.5mm lead Eh, .5mm.
|
# ? Jul 12, 2020 17:10 |
|
Threads thoughts on the new sailor compass 911's coming out? I like the colors, and for $39 they look solid. I finally fixed my Pilot VP. I tried everything, and finally switching back to a cartridge made it a smooth writer again. I don't know why it's only the converter that makes the nib skip or not come out.
|
# ? Jul 12, 2020 23:53 |
|
Did you have the little metal cap on while the converter was in it by chance?
|
# ? Jul 13, 2020 03:34 |
|
Thread title + pencil talk = БiГ̣O┴ MR2 and a Kuru Toga. The lead was a pack-in, don't me just yet gschmidl fucked around with this message at 12:01 on Jul 13, 2020 |
# ? Jul 13, 2020 11:57 |
|
Ok, now you can bring it out, these are objectively better in every way than what came with the pencil.
|
# ? Jul 13, 2020 17:59 |
|
Heath posted:Did you have the little metal cap on while the converter was in it by chance? What bit? the little metal thing that rattles inside the converter?
|
# ? Jul 13, 2020 18:34 |
|
No, there's a metal cap that is intended to go on over the cartridge. If you have a converter in you probably never used it. It keeps the button from squishing the cart.
|
# ? Jul 13, 2020 18:38 |
|
Heath posted:No, there's a metal cap that is intended to go on over the cartridge. If you have a converter in you probably never used it. It keeps the button from squishing the cart. It doesn't fit over the CON-40, at least on the Capless LS.
|
# ? Jul 13, 2020 20:03 |
|
LionArcher posted:Threads thoughts on the new sailor compass 911's coming out? I like the colors, and for $39 they look solid. Sailor's steel nibs are really good and if they're anything like the Procolor line then they're going to be good pens. It's neat that they're packaging in a converter too, as that's usually not included. Edit: Whoops, skimmed and misread some posts. Chip McFuck fucked around with this message at 20:33 on Jul 13, 2020 |
# ? Jul 13, 2020 20:29 |
|
Chip McFuck posted:Sailor's steel nibs are really good and if they're anything like the Procolor line then they're going to be good pens. It's neat that they're packaging in a converter too, as that's usually not included. Good, because at $39 I can grab two, versus the sailor pro gear slim (I love the four seasons winter addition) colors I just love, but at $180-220... Yikes. My most expense pen is my Lamy 2000 LionArcher fucked around with this message at 22:19 on Jul 13, 2020 |
# ? Jul 13, 2020 22:14 |
LionArcher posted:Threads thoughts on the new sailor compass 911's coming out? I like the colors, and for $39 they look solid. I finally fixed my Pilot VP. I tried everything, and finally switching back to a cartridge made it a smooth writer again. I don't know why it's only the converter that makes the nib skip or not come out. it's because pilots converters are what we call in the industry jargon, "Toilet Garbage"
|
|
# ? Jul 14, 2020 00:07 |
I too have an ink cartridge in my VP that just gets refilled w/ a syringe when needed.
|
|
# ? Jul 14, 2020 00:09 |
|
Doctor Dogballs posted:it's because pilots converters are what we call in the industry jargon, "Toilet Garbage" Are the Sailor converters better? I'm starting to really like some of the special additions of the Sailor Pro gear slim.
|
# ? Jul 14, 2020 03:12 |
It's difficult to be worse than pilot converters so yes.
Sankis fucked around with this message at 05:04 on Jul 14, 2020 |
|
# ? Jul 14, 2020 04:52 |
|
LionArcher posted:Are the Sailor converters better? I'm starting to really like some of the special additions of the Sailor Pro gear slim. Sailor converters work just fine and are way better than a Con-40. They also come in a staggering amount of color options so you can match your converter color to the pen. Pro Gear Slims are great pens and make for fantastic daily writers. I used a Slim in a lovely green/black colorway for a while before switching to a full-sized Pro Gear.
|
# ? Jul 14, 2020 05:13 |
|
Wait, am I understanding correctly that Sailor converters fit into pilot pens? gently caress, knowing that earlier would have saved me a lot of trouble.
|
# ? Jul 14, 2020 06:18 |
|
wait what’s supposed to be wrong with the con-40? it works perfectly for me
|
# ? Jul 14, 2020 07:10 |
|
bad posts ahead!!! posted:wait what's supposed to be wrong with the con-40? it works perfectly for me It works but they're completely impossible to get here. I have to order from Italy or Germany. Sailor MIGHT be easier to get.
|
# ? Jul 14, 2020 07:33 |
|
Talking about converters or noodlers is the fountain pen equivalent of politics and religion. People have opinions.FFT posted:0.05mm would be a hell of a pencil and now I'm just imagining an 11.5mm lead Wouldn't that just be like, a piece of chalk?
|
# ? Jul 14, 2020 07:52 |
bad posts ahead!!! posted:wait what’s supposed to be wrong with the con-40? it works perfectly for me It works but it's poo poo for capacity and fiddly and frankly once one is past two inks and two pens it's just more sensible to refill cartridges directly.
|
|
# ? Jul 14, 2020 08:44 |
|
gschmidl posted:Wait, am I understanding correctly that Sailor converters fit into pilot pens? gently caress, knowing that earlier would have saved me a lot of trouble. What? No, they don't.
|
# ? Jul 14, 2020 11:59 |
|
Dad Hominem posted:What? No, they don't. Ok, "good".
|
# ? Jul 14, 2020 12:30 |
|
FFT posted:Also carbon naturally has a beehive structure, how is it different for being ceramic anyway Pencil lead is rarely pure graphite (carbon).
|
# ? Jul 14, 2020 14:29 |
|
bad posts ahead!!! posted:wait what’s supposed to be wrong with the con-40? it works perfectly for me There's nothing necessarily wrong with the Con-40, it's just over-engineered which has lead to a less than optimal experience for me. The mesh in the converter that keeps the agitators from falling out creates surface tension that the ink has to overcome before it can enter the converter or feed. For me, this lead to a lot of flow issues especially with pigmented ink. Granted, I haven't used one in a while so they might have addressed that issue, but it made for a lot of unnecessary frustration when I used one.
|
# ? Jul 14, 2020 15:47 |
|
Chip McFuck posted:There's nothing necessarily wrong with the Con-40, it's just over-engineered which has lead to a less than optimal experience for me. The mesh in the converter that keeps the agitators from falling out creates surface tension that the ink has to overcome before it can enter the converter or feed. For me, this lead to a lot of flow issues especially with pigmented ink. Granted, I haven't used one in a while so they might have addressed that issue, but it made for a lot of unnecessary frustration when I used one. It's still like that. I just fill it with a syringe, but have not had feed issues, just with filling it completely.
|
# ? Jul 14, 2020 16:53 |
|
|
# ? Jun 3, 2024 22:33 |
|
Chip McFuck posted:Pentel makes excellent mechanical pencils as well. Their Sharp and Graphgear 500 series got me through art school and their erasers are the same polymer that's used in high-quality artist erasers. The Kerry is more than just comedy. It's a great pocket pencil that isn't conspicuous away from the drafting desk. When capped its short enough to fit nicely in a pocket, and when posted it is just right if you prefer shorter writing utensils with lower cg. It also has the same eraser as the Graphgears. I'd also recommend the original Pentel Quicker Clicker. The original, not the ones with rubber grips. It has a full-sized eraser and no cap, both of which are my main gripes with modern pencils. Since the advance is on the side you can apply more pressure on the eraser. You can still find the originals on ebay and sometimes Amazon. IMO they ruined the lineup around 15 years ago when they started adding the grips. Edit: Here's the one I'm talking about. Eraser cap is optional. Pioneer42 fucked around with this message at 18:14 on Jul 14, 2020 |
# ? Jul 14, 2020 18:10 |