|
I’ve been thinking about trying a Dissector up front on my hardtail next time around. Still fast rolling and relatively light, but a bit more cornering grip than the standard light/fast options. Dissector was designed as a rear tire, but people seem to like it as a front for more XC/trail type riding.
|
# ? Oct 3, 2020 03:18 |
|
|
# ? May 23, 2024 17:51 |
|
kimbo305 posted:But I'm too cowardly to even attempt unmounting the unwobbly rear Bike shops are dirt cheap for labor. As big of a pain as cushcore sounds, it's probably worth the 20-30 bucks they'd charge to put it on.
|
# ? Oct 3, 2020 03:34 |
|
kimbo305 posted:But I'm too cowardly to even attempt unmounting the unwobbly rear I wouldn't run a 2.5 or 2.6 on my downhill bike, I think it's kinda crazy to consider putting any 2.5 or 2.6 tire on a bike you have to pedal around unless you really find that a 2.4 isn't enough.
|
# ? Oct 3, 2020 03:35 |
|
Suburban Dad posted:Bike shops are dirt cheap for labor. As big of a pain as cushcore sounds, it's probably worth the 20-30 bucks they'd charge to put it on. I think the calculus was that no hour figure they could quote would be worth the time spent doing that over all the other easy work they have coming now during covid. If it were unmounted, that'd be one thing, but I can see having to undo my work on a carbon rim might be too much risk to take on. VelociBacon posted:I wouldn't run a 2.5 or 2.6 on my downhill bike, I think it's kinda crazy to consider putting any 2.5 or 2.6 tire on a bike you have to pedal around unless you really find that a 2.4 isn't enough. I've only ridden two plus bikes, and one pedaled ok, and the other was incredibly slow. Both on 3" Dirt Wizards. But yeah, I can't convince myself that 5mm extra width would be the thing that seals the deal.
|
# ? Oct 3, 2020 03:46 |
|
I grew up riding an original super 8 with Monster Ts and I think 2.7" Nokian gazzaloddis but I'm not 14 anymore and I want agility in my bike!
|
# ? Oct 3, 2020 05:28 |
|
I mean you are only talking about 0.1 to 0.2 inches here which is like, within the variation of different tires and wheel widths. Assegai for example only even comes in 2.5 and 2.6. Also 2.4 on a 30mm wheel is becoming the thing for xc. jamal fucked around with this message at 06:25 on Oct 3, 2020 |
# ? Oct 3, 2020 06:22 |
|
VelociBacon posted:I wouldn't run a 2.5 or 2.6 on my downhill bike, I think it's kinda crazy to consider putting any 2.5 or 2.6 tire on a bike you have to pedal around unless you really find that a 2.4 isn't enough. unless its a hardtail, imo
|
# ? Oct 4, 2020 00:28 |
|
It is, fwiw, but I ordered the Dissector 2.4.
|
# ? Oct 4, 2020 01:57 |
|
I'm really liking the Michelin Wild Enduro F/R pair.
|
# ? Oct 4, 2020 02:21 |
|
I have a very sensible reason for running 2.6 tires: they're what I found on sale when building the bike.
|
# ? Oct 4, 2020 04:21 |
|
I created a pair of trailforks routes that combined were 5 miles shorter and 1000' vert less than what my garmin measured. Anyone else have this issue?
|
# ? Oct 4, 2020 05:16 |
|
Whats all this bullshit about skinny tires?
|
# ? Oct 4, 2020 05:52 |
|
n8r posted:I created a pair of trailforks routes that combined were 5 miles shorter and 1000' vert less than what my garmin measured. Anyone else have this issue? The climbing could be GPS + altimeter differences but that mileage is a huge gap. Did TrailForks screw something up and drop a trail? Do you possibly have a second GPS track from another ride to verify your file?
|
# ? Oct 4, 2020 14:37 |
|
Where the Trail Ends is on Amazon Prime right now. Pretty freaking sweet and still amazing 8 years later.
|
# ? Oct 4, 2020 18:40 |
|
I signed up for my first race in like 3 years. It's the Whole Enchilada at the Whitewater Center. 45-50 miles, enough climbing up make it hurt. I will be doing it this Saturday, 13 days after a crash at the same place.
|
# ? Oct 4, 2020 22:27 |
|
Got a little bit out of town to do a ride I've been wanting to do for years. Trail 7 in the swan mountains, a little bit to the south of glacier national park bring your bear spray Generally this ride gets shuttled, and we sort of did that, by parking a car at the bottom of the road and then driving a little bit up toward the trailhead. Which meant we still had to ride 2k feet up to the start of the trails and then back to the first car on the highway. You get up there a ways These mountains are big and pretty remote. Don't gently caress up. There was a pretty long section of hiking The new bike worked really well except for when i sliced my rear tire like 10 min into the ride. hi we came from over there jamal fucked around with this message at 06:19 on Oct 5, 2020 |
# ? Oct 5, 2020 06:07 |
|
How dumb of an idea is it to buy a Commencal 29/27.5 downhill bike?
|
# ? Oct 5, 2020 15:55 |
|
jamal posted:Got a little bit out of town to do a ride I've been wanting to do for years. Trail 7 in the swan mountains, a little bit to the south of glacier national park This is extremely my jam. Looks like a great ride and would love to do something similar if I ever made it up to Montana to ride. How exposed did it get at the top? Ropes4u posted:How dumb of an idea is it to buy a Commencal 29/27.5 downhill bike? If you'll go to the park to enjoy it, do it.
|
# ? Oct 5, 2020 16:08 |
|
Ropes4u posted:How dumb of an idea is it to buy a Commencal 29/27.5 downhill bike? They seem fantastic! Fantastique
|
# ? Oct 5, 2020 16:32 |
|
vikingstrike posted:If you'll go to the park to enjoy it, do it. My wife is 100% onboard and the park is close enough to hit every month it’s open. VelociBacon posted:They seem fantastic! Fantastique They are close enough we can torment their shop for a ride, and everything I have read appears positive. Thanks for the input (validation).
|
# ? Oct 5, 2020 16:37 |
|
Ropes4u posted:My wife is 100% onboard and the park is close enough to hit every month it’s open. Oh, I'm down in Vancouver so if you pick up a DH bike you automatically join my band of merry misfits.
|
# ? Oct 5, 2020 16:49 |
|
VelociBacon posted:I'm down in Vancouver This thread makes me resent Florida a little. I wish I could live somewhere with access to all your beautiful mtb-friendly mountains (or ANY mountains, for that matter), without giving up having interesting paddling spots. We do get some cool swampy trails like Alafia, but it's not quite the same. Unsinkabear fucked around with this message at 17:14 on Oct 5, 2020 |
# ? Oct 5, 2020 17:02 |
|
vikingstrike posted:This is extremely my jam. Looks like a great ride and would love to do something similar if I ever made it up to Montana to ride. How exposed did it get at the top? There was a good amount of steep side hill where you really needed to focus on keeping your tires on the trail but nothing really that bad. Phil, who's one of the best riders I know, put his wheel off the edge and went otb at some point behind me and it did throw him off a bit for awhile. There were a number of things we had to walk up but on the way down I can only think of a couple of steep switchbacks that seemed a little too tight to get around coming off this little high point. But the ridgelines the trail follows were generally flat and wide There was even a series of little narrow "lakes" up on one At the same time it's definitely not an easy ride or a mellow trail. Lot of rocks, lot of steep, technical climbing. Would have been a fairly unpleasant day on my old hardtail but was great on the hei hei, and these are the kind of rides I need to do more of with this bike. On my local smooth trails I just notice that it's slower on the climbs. I think I have my suspension mostly figured out and essentially didn't touch the shocks all day- just left them in "trail" mode. Partway down the descent I did switch to open which added just a touch of extra comfort, and we did get going pretty good toward the bottom. We were all on 120mm bikes actually- me on the Hei Hei, Phil and Andrew on Orbea oiz TRs, and Jeremy on an epic evo. https://www.strava.com/activities/4152637348 jamal fucked around with this message at 17:24 on Oct 5, 2020 |
# ? Oct 5, 2020 17:12 |
|
Unsinkabear posted:
I'm down in Vancouver because Commencal is an hour drive north of me! We have paddling here too.
|
# ? Oct 5, 2020 17:36 |
|
Unsinkabear posted:
sounds like you need to move to Bend Oregon..
|
# ? Oct 5, 2020 18:17 |
|
Ropes4u posted:sounds like you need to move to Bend Oregon.. Don't I wish...
|
# ? Oct 5, 2020 18:49 |
|
RIP Bike Mag: https://www.adventure-journal.com/2020/10/bike-powder-snowboarder-and-surfer-magazines-shut-down/ Have some friends that got their start there and I got to work with their Bible of Bikes crew once, they were top notch all around. Now they're off to join dirt rag at the great printing press in the sky.
|
# ? Oct 5, 2020 19:49 |
|
Spime Wrangler posted:RIP Bike Mag: https://www.adventure-journal.com/2020/10/bike-powder-snowboarder-and-surfer-magazines-shut-down/ That sucks! Bike magazine has some of the coolest bike photography and it was the only magazine left in my subscriptions where I still looked at it in magazine format. Everything else I'm just reading articles these days. I was just considering switching to a physical subscription a few days ago!
|
# ? Oct 5, 2020 20:03 |
|
Spime Wrangler posted:RIP Bike Mag: https://www.adventure-journal.com/2020/10/bike-powder-snowboarder-and-surfer-magazines-shut-down/ I feel bad for the people that work there.
|
# ? Oct 5, 2020 20:27 |
|
can I avoid having to learn how to shift correctly by going to box 1x9? My NX cassette is bent, I assume just from shifting under load
|
# ? Oct 7, 2020 00:50 |
|
How much load, and pics of the cassette?
|
# ? Oct 7, 2020 00:56 |
|
feelix posted:can I avoid having to learn how to shift correctly by going to box 1x9? My NX cassette is bent, I assume just from shifting under load I hope this is sarcasm. Going with a drivetrain manufacturer that's probably 2nd tier compared to the big ones isn't going to fix the problem. Have some mechanical empathy bro.
|
# ? Oct 7, 2020 02:19 |
|
The only thing that's second tier to NX is SX.
|
# ? Oct 7, 2020 02:34 |
|
And the only thing second teir to SX is box.
|
# ? Oct 7, 2020 02:40 |
|
kimbo305 posted:How much load, and pics of the cassette? A decently heavy (210lbs) and decently strong (350+ squat) guy just mashing up a short climb as hard as I can, shifting in the middle of it, not giving a gently caress at all It's hard to get a good pic but it's a small section (like 5 or so teeth) of one of the big cogs bent out away from the wheel. Suburban Dad posted:I hope this is sarcasm. Going with a drivetrain manufacturer that's probably 2nd tier compared to the big ones isn't going to fix the problem. Have some mechanical empathy bro. I don't see what Shimano and SRAM's
|
# ? Oct 7, 2020 18:47 |
|
I need new grips and I'm trying to decide between ODI Rogue lock-on, which is the only grip I have used in the last 15 years, and the ESI Extra Chunky grips, which I have never used. To those who use ESI grips, while they look smooth, I imagine they are very grippy - can you confirm? One thing I like about the Rogues, besides how meaty they are, is that they feel almost tacky to the touch.
|
# ? Oct 7, 2020 19:15 |
|
feelix posted:It's hard to get a good pic but it's a small section (like 5 or so teeth) of one of the big cogs bent out away from the wheel. Probably construction quality matters more than steel supply choice. If that bent cog was already tilted a little bit toward the chainline, it would magnify the sideload on the cog. Similar if the splines were the least bit loose. I’d probably be trying to do a JRA warranty case with SRAM first before committing to losing 3 gears.
|
# ? Oct 7, 2020 20:02 |
|
feelix posted:A decently heavy (210lbs) and decently strong (350+ squat) guy just mashing up a short climb as hard as I can, shifting in the middle of it, not giving a gently caress at all Shift earlier and softer
|
# ? Oct 7, 2020 20:03 |
|
me your dad posted:I need new grips and I'm trying to decide between ODI Rogue lock-on, which is the only grip I have used in the last 15 years, and the ESI Extra Chunky grips, which I have never used. To those who use ESI grips, while they look smooth, I imagine they are very grippy - can you confirm? One thing I like about the Rogues, besides how meaty they are, is that they feel almost tacky to the touch. You need to try OURY grips, they're perfect. I've been using them for a couple seasons, switched from rogues, they're the perfect grip. The non-lock-on ones are the best.
|
# ? Oct 7, 2020 20:21 |
|
|
# ? May 23, 2024 17:51 |
|
feelix posted:A decently heavy (210lbs) and decently strong (350+ squat) guy just mashing up a short climb as hard as I can, shifting in the middle of it, not giving a gently caress at all Sounds like your technique could use some work, but by all means waste money on something that isn't the part's fault. If I find out I'm in the wrong gear up a climb I'll slow my pedaling down until the chain has fully switched over then continue hammering, or just hike a bike. You probably hammered on it when it was only partially meshed (since it's like 5 teeth) so load will increase significantly as there's less surface area of contact. Even on flat roads you should pause hard pedaling while shifting. Also the new shimano 12 speeds supposedly shifts pretty great under load without grinding, so they have something figured out that the others don't. Probably patents that the others don't have access to. VelociBacon posted:You need to try OURY grips, they're perfect. I've been using them for a couple seasons, switched from rogues, they're the perfect grip. The non-lock-on ones are the best. Suburban Dad fucked around with this message at 21:43 on Oct 7, 2020 |
# ? Oct 7, 2020 21:41 |