|
You can pry my m18 hackzall from my cold dead hands
|
# ? Apr 5, 2021 22:57 |
|
|
# ? May 19, 2024 15:48 |
|
coathat posted:The newest fancy cordless drills have anti-kickback protection and wont even LET you break your wrist. Probably designed by some bitchass millenial sissy. How are you supposed to become a real man if you don't break or amputate part of your body using a power tool?
|
# ? Apr 5, 2021 23:09 |
|
Actually looking for what I am going to be doing, I think a miter saw is a better tool than a circular saw. A lot of folks seem to really like the Ryobi 10” so I think that’s how I am going to go
|
# ? Apr 5, 2021 23:36 |
|
What are you doing? Chopping 2x4s?
|
# ? Apr 5, 2021 23:43 |
|
Mr. Mambold posted:That's okay, Gen'l Custer. You go on down thar. They'll open up on you with welcome arms. What the heck even is a hypoid saw? Looks like a worm drive?
|
# ? Apr 5, 2021 23:52 |
|
Consider it babbies first saw for woodworking but does not yet need nor have space for a table saw.
|
# ? Apr 5, 2021 23:52 |
Kaiser Schnitzel posted:What the heck even is a hypoid saw? Looks like a worm drive? Yeah but the worm is tapered.
|
|
# ? Apr 5, 2021 23:53 |
|
KKKLIP ART posted:Actually looking for what I am going to be doing, I think a miter saw is a better tool than a circular saw. A lot of folks seem to really like the Ryobi 10” so I think that’s how I am going to go Just make sure that whatever saw you use has enough cutting depth for the cuts you plan to make. Remember that you don't get the full diameter of the sawblade in cut depth.
|
# ? Apr 5, 2021 23:54 |
|
TooMuchAbstraction posted:Just make sure that whatever saw you use has enough cutting depth for the cuts you plan to make. Remember that you don't get the full diameter of the sawblade in cut depth. Yeah I looked at that. The 10” seems to fit the bill for what I need. Thank you for the tip though, obviously this is relatively new territory for me
|
# ? Apr 6, 2021 00:02 |
|
KKKLIP ART posted:Actually looking for what I am going to be doing, I think a miter saw is a better tool than a circular saw. A lot of folks seem to really like the Ryobi 10” so I think that’s how I am going to go It's a good saw. I have the slidey one and have it installed on a rolling stand and it owns. Miter saws are fast, repeatable, and easy to do accurate cuts on odd angles Things you will use a miter saw for: baseboard, molding, cutting boards to length, lopping off the ends of wood or laminate flooring You can do all that with a circular saw, but some of those are going to be very hard to do quickly and safely. Circular saws are versatile, and sometimes require a bit more technique or finesse to get the result you need. Things a circular saw can do a miter saw cannot: rip boards and planks to length, cut stuff in-place Circular saw is higher priority for renovation stuff imo. This is the tools thread, so the correct answer is "get both." Corded Skil saws are like $50
|
# ? Apr 6, 2021 00:03 |
|
I got a miter saw long before a circular saw and it's great. I got the Milwaukee M18 7-1/4" saw and I wish I'd gotten the 10" because there have been a few cases where it was very hard to make it do what I needed. Honestly I think a miter saw is the first saw a homeowner should have. If you need big sheets of wood cut, you can get that done at Home Depot when you buy them. You're much more likely to need to make small fine cuts on stuff you're working on around the house. Also definitely get a folding and rolling stand. It's a game changer.
|
# ? Apr 6, 2021 00:14 |
|
Hey, gonna ask here and in the AI detailing because I think these are the biggest crossovers: got a friend looking for a pressure washer primarily for car washing, so electric. He can borrow my gas one for higher flow/higher PSI stuff. I've previous had a low end Karcher electric that had a plastic pump housing and was garbage, required almost it's value in parts to fix when it cracked, etc. So what's worth buying in this space for 120v with the full understanding that it's going to be lower pressure and half or less the GPM of a gas unit?
|
# ? Apr 6, 2021 00:36 |
|
Motronic posted:Hey, gonna ask here and in the AI detailing because I think these are the biggest crossovers: got a friend looking for a pressure washer primarily for car washing, so electric. He can borrow my gas one for higher flow/higher PSI stuff. I'm no expert but it seems like all the electric ones are basically disposable. I was talking to a lady once who made extra money by buying cheap broken electric pressure washers at auction then repairing them and selling them at swap meets to pros/contractors who just use them til they break then buy a new one. I'd love to know if there's a good electric that uses metal components and such though.
|
# ? Apr 6, 2021 01:23 |
|
Motronic posted:Hey, gonna ask here and in the AI detailing because I think these are the biggest crossovers: got a friend looking for a pressure washer primarily for car washing, so electric. He can borrow my gas one for higher flow/higher PSI stuff. I got the Sunjoe one from Amazon in the $100 range. It has a soap tank and works fine. Only issue is that I have very hard water, and it builds up around where you attach the pressure hose to the gun and to the pump unit. Also it's been about 4 years I need to replace the o-rings on the hose. Edit it's $160 right now, I paid $108 in 2017.
|
# ? Apr 6, 2021 02:20 |
|
No idea if my experience is typical, but I have used the absolute crap out of my HF Portland for like 3 years, and it goes on sale for $80. From reading reviews, it's really important to fully bleed the pump. I usually hook up the water (no power yet), lock the trigger and let it run for 5 minutes or so. It takes a while to work all the air out, and those pumps really don't like to hit a bubble. Oh yeah, and bleed the water hose best you can before hooking that up as well.
|
# ? Apr 6, 2021 04:13 |
|
Kaiser Schnitzel posted:What the heck even is a hypoid saw? Looks like a worm drive? It does, and I'd never heard of it when I was shopping for a worm drive for a fuckoff big deck project in '81. I think I've posted pics in the woodworking thread at some point. The tool store had a Makita saw on display the guy called hypoid, and it's basically a right-angle grinder except with a blade, as I understood it and a few pounds lighter than a worm drive. No chain, no oil duct, and it had a reverse winding brake, which back then, no U.S. makers had- and on a beast of a circular saw, hell yeah I appreciated that. I was already something of a Makita fanboy, they were just breaking into the U.S. market. The store didn't have any others yet, I think it was the first one in the state actually, and I talked him into selling me the display unit. Damnedest thing I ever used it for was to square and cut out broken bricks on my house a few years back. Wrapped it in saran wrap, propped the water hose aimed at the offending bricks, and cut them with a composite blade. It forgave me.
|
# ? Apr 6, 2021 04:14 |
|
Just to chime in to be contrarian again but I hardly ever use my miter saw and I use my circ saw so often that it basically never gets put away.
|
# ? Apr 6, 2021 04:26 |
|
angryrobots posted:No idea if my experience is typical, but I have used the absolute crap out of my HF Portland for like 3 years, and it goes on sale for $80. Those are on sale this week https://www.harborfreight.com/online-promo-2021.html
|
# ? Apr 6, 2021 04:28 |
|
My miter saw is probably my favorite powered saw. Only other contender is my jigsaw
|
# ? Apr 6, 2021 04:32 |
|
I had a generic electric pressure washer I bought off Amazon that looks much like all the others and I can't say I was impressed, it didn't break on me but from the beginning it had problems maintaining pressure, it didn't like to provide pressure continuously for more than 15 or so seconds before taking a 5 second pause. Never broke on me but I also didn't find myself pulling it out very often in the 5 years I had it. There are now higher end electric models if you want to spend over $200. I bought a Greenworks from Lowes last summer that has a metal pump, brushless motor and 3/10(everything/motor) year warranty. I really can't say how it compares to gas but it's noticeably more powerful than the cheap electric one I had and it had no problem running for an hour plus the times I had it out, it also didn't constantly want to fall over like the generic models everyone sales.
|
# ? Apr 6, 2021 06:02 |
|
sharkytm posted:Whichever, I think. Bosch has great stuff in Europe, but really limited availability and selection here in the states. For anyone that's thinking of buying Bosch: From what I've researched prior to buying, there is a big difference between blue and green Bosch stuff. The blue stuff is for professionals (any many use Bosch here in Europe), and the green stuff is much cheaper and aimed at the home gamer. Much better than the Black and Decker stuff though.
|
# ? Apr 6, 2021 06:09 |
|
angryrobots posted:This is so wrong I have to quote it again. I sold my corded sawzall cause I don't see any advantage in it whatsoever. Not trolling, I demoed a shed and a hottub the other day with my buddies sawzall and ended up getting my old heavy corded team red. It wasn't a m18 but I guess I'll have to try that out and see if it has any juice.
|
# ? Apr 6, 2021 16:02 |
|
Harry Potter on Ice posted:Not trolling, I demoed a shed and a hottub the other day with my buddies sawzall and ended up getting my old heavy corded team red. It wasn't a m18 but I guess I'll have to try that out and see if it has any juice. Your buddy probably gave you a single poo poo battery and it serves you right for borrowing.
|
# ? Apr 6, 2021 16:19 |
|
Elem7 posted:I had a generic electric pressure washer I bought off Amazon that looks much like all the others and I can't say I was impressed, it didn't break on me but from the beginning it had problems maintaining pressure, it didn't like to provide pressure continuously for more than 15 or so seconds before taking a 5 second pause. Never broke on me but I also didn't find myself pulling it out very often in the 5 years I had it FWIW, that's how they behave when the pump hits an air bubble.
|
# ? Apr 6, 2021 17:32 |
|
angryrobots posted:No idea if my experience is typical, but I have used the absolute crap out of my HF Portland for like 3 years, and it goes on sale for $80. Add a second anecdote-point to this. I have had the same HF Portland for three years and my experience matches. I even left mine outside all winter without draining it and it doesn't seem to have broken. Works great for washing cars and decks. Not so great on siding. Takes a very long time on sidewalks; would not recommend except for blasting the weeds and grass out of the cracks.
|
# ? Apr 6, 2021 17:48 |
|
I don't use it that much but my dad's got a Sunjoe that's been decent. I think it was about $150 on amazon a few years back. I thought it was amusing that Ben Krasnow turned the same model into a fairly competent and potentially dangerous home waterjet cutter with a lot of modification. Obviously don't do this, but it's still neat. https://www.youtube.com/watch?v=Lg__B6Ca3jc
|
# ? Apr 7, 2021 01:12 |
|
Any views on good cutting blades for oscillating multi tools? I got this Bosch set and the blades were great while they lasted, but I don't think they held up well enough to justify that kind of money. I am not a frequent user and have broken or significantly worn down teeth on all the blades.
|
# ? Apr 8, 2021 02:30 |
|
mcgreenvegtables posted:Any views on good cutting blades for oscillating multi tools? I got this Bosch set and the blades were great while they lasted, but I don't think they held up well enough to justify that kind of money. I am not a frequent user and have broken or significantly worn down teeth on all the blades. These aren't good but so cheap that I don't care: https://www.amazon.com/gp/product/B07TSBTDJ2/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 If I have a specific thing I'm doing a lot of I'll got get good blades for that particular thing, but this little kit has been great to have around. I think someone right in this thread recommended it a while back.
|
# ? Apr 8, 2021 02:52 |
|
I'm not sure there is such a thing as a long lasting OMT blade, I've bought expensive ones and cheap ones, they all dull quickly but while some cheap ones struggle to cut a single nail the more expensive ones can get through several before becoming near useless. I always feel like I'm getting ripped off somehow buying them. For what it's worth Project Farm did a comparison video of a bunch on YouTube and I bought the winning EZARC blades and still wasn't very impressed.
|
# ? Apr 8, 2021 05:50 |
|
Elem7 posted:I'm not sure there is such a thing as a long lasting OMT blade, I've bought expensive ones and cheap ones, they all dull quickly but while some cheap ones struggle to cut a single nail the more expensive ones can get through several before becoming near useless. I always feel like I'm getting ripped off somehow buying them. same. I go for the not super cheap ones but after buying good quality ones and realizing they die easily too, so I just go middle of the road and use em. tater_salad fucked around with this message at 12:49 on Apr 8, 2021 |
# ? Apr 8, 2021 12:00 |
|
tater_salad posted:same. I go for the not super cheap ones but after buying good quality ones and realizing they die easily too, so I just go middle of the road and use em. All tools are disposable in the end. Ashes to ashes dust to dust
|
# ? Apr 8, 2021 12:53 |
|
Mr. Mambold posted:Your buddy probably gave you a single poo poo battery and it serves you right for borrowing. He was there, it was his hot tub I brought my own tools just in case but weird thing about the borrowing ya grumpy old boomer. Rent free
|
# ? Apr 8, 2021 16:39 |
|
Harry Potter on Ice posted:He was there, it was his hot tub I brought my own tools just in case but weird thing about the borrowing ya grumpy old boomer. Rent free I was just piling on your bad take. Seriously, you've got a potential movie scene. laffs ensue
|
# ? Apr 8, 2021 16:49 |
|
Tool review time! Posting this in AI and in HCH to shamelessly increase my post count so that one day I may proudly boast that I have an average of 4.20 posts per day. Just got one of these: https://www.milwaukeetool.com/Products/Power-Tools/Metalworking/Grinders/2783-20 Its a team red, M18 4 1/2"-5" braking grinder. Bought it online Wednesday, got it Yesterday and used it for the first time just now. Waiting for one of my 6 AH batteries to charge so I can go back to work with it. The thing: Its kinda long. A bit longer than the 4 1/2" Dewalt (corded) that I bought a few weeks ago. Obviously its even longer with the battery. Weight isn't bad with a 6AH battery, I haven't compared it the the yellow one I have, but there isn't a significant difference AFAICT. The tool-less guard is easy to reposition to a variety of angles so that it'll hopefully guard you slightly better than having no guard at all. Its just a little lever that you pull on and then twist the guard. I was doing this with welding gloves on and didn't have any troubles. Your results may vary. Each........... "designated" guard position has a positive lock to it, once its in there, its not moving. Tool-less disc change is convenient because you don't have to search for a wrench. Something that seems to get easily misplaced around here. The Nut has a little spring loaded handle that you flip up, and use to twist to loosen and tighten. Its not that convenient however because its not particularly easy to unscrew with a glove on. At least not with welding gloves its not. That being said, its a minor inconvenience. If you're using gloves with the kind of dexterity that welding gloves are NOT known for then you probably won't have much issue. The handle DOES seem a little bit thin though. I'm not sure if its a good idea to stick a screw driver in there to either tighten the poo poo out of it, or to loosen it if its had the poo poo tightened out of it but hey, you do you. Update: Had to stick a screwdriver through the handle to change a disc. Its not as flimsy as I had originally thought. The braking aspect: Its a "braking" grinder. There is some sort of mechanical brick-a-brack inside it that makes the discs stop faster once you've let off the power. Anyone thats used a grinder for more than about 5 minutes has probably let off the switch, set the grinder down on the bench without looking and had a rag get caught up in the disc, or set it down on its side, the wheel digs in and the thing goes skittering across the work bench. This stops that from happening. According to the Milwaukee website: " A Rapid Stop Brake feature stops accessories in under 2 seconds". I didn't actually count but in practice, using cut off discs and grinding wheels, it definitely stopped faster than any other grinder I've used. Probably not today, but sometime I've going to use a wire wheel and wire cup brush which are considerably heavier than the discs and see how long it takes to stop. Anti-Vibration side handle: There is a shock absorber looking thing in the handle and its got some grippy rubbery type spots on it. I guess I could compare it to the regular handle (I think they have the same thread) from the yellow grinder and see if there is a difference, but my tingling hands tell me that the anti-vibration part is mediocre at best. Performance: Man this thing sucks batteries dry. Just for the hell of it, I tried with one of my older 2AH batteries to see what would happen. Performance was....... Lacklustre but I didn't expect much. This was more of a "gently caress it why not"? kind of thing. Next up was on of my HIGH OUTPUT XC6.00000000!!!!!!!!!! batteries. I've got two and they're the biggest ones I have. Performance was considerably better with this one obviously. I didn't have any issues with speed, or torque from the motor. It didn't bog down at all and it make a hell of a lot of sparks. I realize of course that at least part of the performance has to do with the quality of the discs themselves. They are hardware store brand. All in all I managed to cut off the lovely parts of my work piece and the grind down the welds to prep for new stuff. I still have a bit more work to do on this thing but I wanted my other 6ah battery fully charged before I get back to it. Having never used a corded angle grinder I don't really have anything to compare to. Performance wise, it seemed on par with the corded ones that I've used in the past, but the battery part was kind of annoying. Milwaukee sells these things with two 5.0AH XC batteries, and I killed my 6AH battery in what I consider to be not that long. I guess if you have a charger on hand and one can be charged up in the time it takes to kill the other then its not *that* bad. They also sell an "HD" kit that comes with two 9.0 AH batteries. They would obviously offer more run time than either the 5 or 6AH batteries. Maybe one of these days I'll get a 9ah battery and report back. E: UPDATE!! YEEHAAAWWWW!!! Just killed my second 6ah battery. I'll admit I was trying to kill it, but I was not doing anything differently than I would have with a corded grinder. All told, I'd say I was actually grinding for about 30-35 minutes total. Also, I had to stick a screw driver through the little pop up handle on the nut to get it off when I was changing discs. Seemed to not be as flimsy as I originally thought. wesleywillis fucked around with this message at 16:40 on Apr 9, 2021 |
# ? Apr 9, 2021 15:49 |
|
Rutibex posted:All tools are disposable in the end. Ashes to ashes dust to dust
|
# ? Apr 9, 2021 16:40 |
|
Stone tools are the most disposable of all! If you asked a neolithic hunter if he had a sentimental attachment to his hand axe he would have sighed then demonstrated how these lovely rocks are always breaking and he made a new one 5 days ago https://www.youtube.com/watch?v=6GSCevT0G4M
|
# ? Apr 9, 2021 17:09 |
|
Home Depot has a couple Milwaukee outdoor tool combos on sale M18 Fuel String Trimmer + Edger Attachment + 8.0Ah battery + Rapid charger - $299 https://www.homedepot.com/p/Milwauk...-2718/308304983 M18 Fuel String Trimmer + Pole Saw attachment + 8.0Ah battery + Rapid charger - $299 https://www.homedepot.com/p/Milwauk...-2720/308304985 M18 Fuel String Trimmer + Hedge Trimmer attachment + 8.0Ah battery + Rapid charger - $299 https://www.homedepot.com/p/Milwauk...-2719/308304984 M18 Fuel String Trimmer + (2) 8.0Ah battery + Rapid charger - $299 https://www.homedepot.com/p/Milwauk...-1880/315705586 M18 Fuel Chainsaw + Blower (tool only) - $299 https://www.homedepot.com/p/Milwauk...24-20/312182877
|
# ? Apr 9, 2021 21:15 |
|
Ughhhhh, I need the DeWalt version of the hedge trimmer attachment.
|
# ? Apr 9, 2021 21:33 |
|
Harbor Freight "US General" Toolchests.. poo poo or good? I played around a little in store today and they seemed to be pretty decently built.. way better than the $99 special that craftsman keeps trying to give away made of metal that's paper thin. I like this one's price and size but am convinced it isn't really going to organize well.. maybe if I got enough socket holders etc. https://www.harborfreight.com/30-in-4-drawer-tech-cart-green-56392.html Soo My thoguht is buy this and stick on workbench for now. Workbench already has a lovely plastic kobolt set of tools sitting on it now. https://www.harborfreight.com/26-in-single-bank-top-chest-red-64160.html Then later in life Grab this one https://www.harborfreight.com/26-in-x-22-in-single-bank-roller-cabinet-orange-56235.html Yes I know colors dont match etc.
|
# ? Apr 9, 2021 23:43 |
|
|
# ? May 19, 2024 15:48 |
|
I have a 44” roller cabinet. They are really good. Basically direct knockoffs of Snap On. And when I say knockoff i dont mean cheaply made crap, I mean they stole the blueprints and the material and just sell it to you for a fuckload less. It has solid thick metal, heavy duty drawer slides, big wheels, even comes with pads in the drawers. Not sure what else I would need to pay 4x as much for a snap on. This is my Elysium fucked around with this message at 00:10 on Apr 10, 2021 |
# ? Apr 10, 2021 00:04 |