|
The caps that came with my new wheels have core removers built in, but if the valves are tight they just slip over the flats. I tried it when i removed the core to inject sealant and then didn't bother putting them back on. I do keep a core remover and a spare core and a schrader adapter in my little bike wallet deal. Especially since my road wheels need valve extenders. Anyway, go ride bikes you nerds. We've got loving smoke coming in already, might have to resort to renewing zwift after i cancelled it in march. jamal fucked around with this message at 18:09 on Jul 12, 2021 |
# ? Jul 12, 2021 18:01 |
|
|
# ? Jun 8, 2024 08:17 |
|
no no it’s the bike industry that’s wrong
|
# ? Jul 12, 2021 18:07 |
|
Slavvy posted:I know, I just don't give a poo poo tbh. It is a garbage design. Schrader valves are on every tyre on every vehicle on the road except for bicycles seemingly and they work perfectly. Even if they were just as good, I would still have to buy a new fitting/adapter for my compressor, never be able to use the pump at a gas station, and gently caress around with a bizarre manual valve collar seemingly from the twenties, for a bike that owes me $150 tops. Or I can drill a couple of holes and enjoy. Like I said these are a dollar and you can use them at the gas station and with your beloved air compressor
|
# ? Jul 12, 2021 18:18 |
|
e.pilot posted:no no it’s the bike industry that’s wrong Correct. It's pretty much like companies going NO NO NO we don't want to use USB C! Standards are good and it's telling people are sticking with "whelp it works" as their argument as oppose to reasons it's superior. My bike tires are schrader and while I do believe the compressor has the proper adapter it would have been slightly inconvenient. This may be surprising but companies/industries do not always pick what's best for it's customers.
|
# ? Jul 12, 2021 18:19 |
|
Dunlop for life
|
# ? Jul 12, 2021 18:23 |
|
The Wiggly Wizard posted:Like I said these are a dollar and you can use them at the gas station and with your beloved air compressor I bought one of these when I visited my dad because he didn’t have a presta pump and I couldn’t bother to bring a real pump. The shop charged me $3.50 and I about had a stroke. Highway robbery.
|
# ? Jul 12, 2021 18:26 |
|
I'm pretty new to running tubeless on my gravel bike. Is it normal to seem to lose air during a long ride. I was running 40 psi at the start, but it definitely didn't seem like 40 at the end. Although I pumped up the bike to 40 at almost 4,000 feet of elevation and then by the time I got home and noticed they were low, the elevation at my house is like 600-700. Maybe that's the difference?
|
# ? Jul 12, 2021 19:53 |
|
Duck and Cover posted:Correct. It's pretty much like companies going NO NO NO we don't want to use USB C! Standards are good and it's telling people are sticking with "whelp it works" as their argument as oppose to reasons it's superior. My bike tires are schrader and while I do believe the compressor has the proper adapter it would have been slightly inconvenient. Yes, the standard for bikes is presta, and has been for a over a century. Clearly, the person drilling holes in a rim because they don’t understand latex tubes leak air and blamed the valve that literally millions have no issues with, are right though. I bet you have some great takes on video game consoles, mac vs pc, iphone vs android, chevy vs ford, et al. Komet posted:I'm pretty new to running tubeless on my gravel bike. Is it normal to seem to lose air during a long ride. I was running 40 psi at the start, but it definitely didn't seem like 40 at the end. Although I pumped up the bike to 40 at almost 4,000 feet of elevation and then by the time I got home and noticed they were low, the elevation at my house is like 600-700. Maybe that's the difference? have you tried drilling your rim and switching to a shrader valve? That’s not right, did you do the tubeless or did a shop? if the latter take it back to them. If the former double check the sealant and possibly add some more, if there’s already a lot in there double check the tape. e.pilot fucked around with this message at 19:57 on Jul 12, 2021 |
# ? Jul 12, 2021 19:54 |
|
Mecca-Benghazi posted:My Walmart bike as a kid and my Brompton now both have schrader valves. I wonder if it was a choice made because schrader is so common outside of the nice bike world. I flatted 2x on a vacation in Idyllwild (mountain town in CA) and because the Brompton had the schrader valves I was able to use a 16" 305 tube from a local bike shop (slightly smaller than the 349 the Brompton uses) and it's still good over a year later. Finding 16" Presta value tires on the road might be a bit hard. The smaller 16" size works ok and they are a common size (kids bikes). 349's? Not as much, but more likely with schrader valves.
|
# ? Jul 12, 2021 20:22 |
|
Komet posted:I'm pretty new to running tubeless on my gravel bike. Is it normal to seem to lose air during a long ride. I was running 40 psi at the start, but it definitely didn't seem like 40 at the end. Although I pumped up the bike to 40 at almost 4,000 feet of elevation and then by the time I got home and noticed they were low, the elevation at my house is like 600-700. Maybe that's the difference? The difference between 4000 and 1000 feet is only 2.5 psi, so probably not.
|
# ? Jul 12, 2021 20:36 |
|
e.pilot posted:
Ask him about KTM! lmao. He's the same cranky rear end in a top hat in Cycle Asylum too. s'all good. The Wiggly Wizard posted:Like I said these are a dollar and you can use them at the gas station and with your beloved air compressor I used these to set the bead on tubeless with my compressor, then threw em back in the toolbag. nbd, whatever. I've 99 problems but Presta isn't one. Nor is Shraeder for the matter. 100% user error, not technology error. Some jerkoff broke a shraeder valve on my truckcamper's tire about a month ago but that's hardly the valve's fault. jamal posted:Anyway, go ride bikes you nerds. Headed out in 5! had to go up about 1300' in altitude to 4700' to escape the smoke. Was on the outer fringe of the smoke in Deschutes and its already impacting my airways. oh hell no, I'm not about to have a repeat of 2017 and 2020.
|
# ? Jul 12, 2021 20:54 |
|
I've had a few gravel tubeless tires intermittently leak air. valves good, tape good, plenty of sealant, but i think in normal use the sidewalls just don't get a good enough coating. Both the troublesome ones were also tanwalls which tend to have one less layer of rubber on the sides (a wtb nano and a maxxis rambler). So I have to take the wheels off, shake them around, and set them on each side for a bit (buckets and trash cans are good for this). Then it's fine for awhile. Spray bottle of soapy water is a good way to find leaks btw.
|
# ? Jul 12, 2021 21:15 |
|
e.pilot posted:Yes, the standard for bikes is presta, and has been for a over a century. This may be difficult to realize but I do not care what the person did, that's pretty irrelevant to my point. My point is there's no real good reason to have both. United States customary system has been standard for over a century and so there's no reason to change! Video game consoles are fine. Mac and PC both suck (in different ways) but the PC has games soooooo I use that. I like IOS better than android but it's more of a IOS sucks less thing. Chevy vs Ford? I do have a Cheverolt Bolt but uhhh I don't really care? Like I wanted an electric small hatchback and their weren't many options at the time. e.pilot posted:
Nevermind forget I responded. cursedshitbox posted:Ask him about KTM! lmao. He's the same cranky rear end in a top hat in Cycle Asylum too. s'all good. I interpreted this as talking about me. I'm going assume that's wrong because I don't post in Cycle Asylum.
|
# ? Jul 12, 2021 21:56 |
|
The only thing I know about valves is that my bicycle tire pump really really likes them. My wheels have the generic rubber valve things that most American bikes I've seen have, and my bicycle pump holds onto them for dear life. I have to flip the lever and then wiggle like hell to get it out the stem, and the whole time I can hear precious ounces of are leaving the tube. I guess one advantage of a comfort hybrid is that the tires work fine with a wide range of pressures?
|
# ? Jul 12, 2021 21:57 |
|
I got my back wheel back and then did a few chill rides with friends and family but tonight I got to ride the usual 40 km ride I do for exercise by myself and beat my previous pr by almost 2 km/hr. Didn't even really get lucky with a headwind either Can't beat exercise to turn a lovely day around
|
# ? Jul 12, 2021 22:07 |
|
imo you should have air in your tires.
|
# ? Jul 12, 2021 23:34 |
|
Sab0921 posted:imo you should have air in your tires.
|
# ? Jul 12, 2021 23:47 |
|
definitely don't want to run too little either
|
# ? Jul 12, 2021 23:48 |
|
Consider also having some not-air in your tires, which can generally allow you to have less air in the remaining space for air while reducing the risk of that air suddenly escaping
|
# ? Jul 12, 2021 23:50 |
|
Those of you using sun sleeves: Is there a way to keep them bright white? Mine are starting to contrast with my jersey in a bad way.
|
# ? Jul 12, 2021 23:56 |
|
The Wiggly Wizard posted:Those of you using sun sleeves: Is there a way to keep them bright white? Mine are starting to contrast with my jersey in a bad way. I bought these a year ago and have worn them at least a dozen times and they're still sparkly white. e: I wash them in a delicates bag with the rest of my laundry, hang dry.
|
# ? Jul 12, 2021 23:59 |
|
Take five, friends. As much as I enjoy a good slap fight about valve standards, it feels like it's starting to get a little personal. I think CSB got you and slavvy mixed up; it happens sometimes.
|
# ? Jul 13, 2021 02:06 |
|
Safety Dance posted:Take five, friends. As much as I enjoy a good slap fight about valve standards, it feels like it's starting to get a little personal. I think CSB got you and slavvy mixed up; it happens sometimes. Yeah sorry I meant slavvy. Rides were good. The smoke caught up to me. There's not many places I can go to escape it at this point. welp.
|
# ? Jul 13, 2021 02:14 |
|
I recently picked up a Salsa Warbird Apex 1 and was looking into upgrading to a power meter, but I'm having a tough time tracking down the actual bottom bracket used on the bike. Per the spec sheets it's a BB86 PressFit, but can't find any specifics beyond that. Trying to figure out if I could use the Rival AXS cranks with the current bottom bracket, but having trouble sussing that out. Assuming I'd need to swap out the BB, but does anyone have an idea? Trying to find the path of least resistance here while not breaking the bank, so definitely open to other suggestions.
|
# ? Jul 13, 2021 03:01 |
|
BB86 is a Shimano standard, so it accepts 24mm spindle cranks. Or SRAM GXP 22/24mm cranks if you're using a GXP bb in there. There are aftermarket 30mm BBs for BB86, but they don't work as well because of lack of space for correct specced bearings.
|
# ? Jul 13, 2021 03:16 |
|
The Wiggly Wizard posted:Those of you using sun sleeves: Is there a way to keep them bright white? Mine are starting to contrast with my jersey in a bad way.
|
# ? Jul 13, 2021 03:16 |
|
jooky posted:I recently picked up a Salsa Warbird Apex 1 and was looking into upgrading to a power meter, but I'm having a tough time tracking down the actual bottom bracket used on the bike. Per the spec sheets it's a BB86 PressFit, but can't find any specifics beyond that. Trying to figure out if I could use the Rival AXS cranks with the current bottom bracket, but having trouble sussing that out. Assuming I'd need to swap out the BB, but does anyone have an idea? I think current SRAM cranks are all 29.9 and, in a totally unexpected move from a big manufacturer, totally incompatible with anything other than Dub bottom brackets, the proud new standard that we'll surely all flock to and pay royalties for.
|
# ? Jul 13, 2021 03:23 |
|
e.pilot posted:Not buying white ones solved this problem for me. Do those black ones stay cool?
|
# ? Jul 13, 2021 03:33 |
|
kimbo305 posted:BB86 is a Shimano standard, so it accepts 24mm spindle cranks. Or SRAM GXP 22/24mm cranks if you're using a GXP bb in there. There are aftermarket 30mm BBs for BB86, but they don't work as well because of lack of space for correct specced bearings. Cool, makes sense; I assume it's a GXP BB. I ran across https://www.hambini.com/bb86-bottom-brackets-with-a-30mm-or-sram-dub-crankset/ in some additional searches and that echoes your last point. Suppose I'm a bit surprised since Salsa has a Force version of the Warbird with a DUB crankset, so I'd be curious what BB they're using and if there's issues with it. SimonSays posted:I think current SRAM cranks are all 29.9 and, in a totally unexpected move from a big manufacturer, totally incompatible with anything other than Dub bottom brackets, the proud new standard that we'll surely all flock to and pay royalties for. SRAM's Force 1 power meter has an option for GXP spindles, so there is at least some options, though not sure how long those will be available.
|
# ? Jul 13, 2021 03:53 |
|
SimonSays posted:I think current SRAM cranks are all 29.9 and, in a totally unexpected move from a big manufacturer, totally incompatible with anything other than Dub bottom brackets, the proud new standard that we'll surely all flock to and pay royalties for. They are 28.99mm (29mm) and what they did was smart. Standard bearings have inner races that are a multiple of 5mm. A 6806 bearing has a 30mm inner race, a 6805 has a 25mm inner race. These races are made of hardened steel, so if you have a 30mm aluminum alloy spindle riding directly on those steel races, your spindle will abrade/ringbark over time. This is more likely if BB alignment is bad (which it often is.) So SRAM's solution was to shrink the crank spindle by the minimum amount and use .5mm plastic shims in between the spindle and bearing race. These are usually dual-purpose top-hats that also serve as a bearing shield/cover. I mean 24mm Shimano spindles really aren't any better. Remember, 5mm increments. MR2437 bearings are more or less bicycle specific. Royalties? Nah. All you need is .5mm Delrin shim. I'll take a DUB spindle over a 30mm spindle every. single. time. TobinHatesYou fucked around with this message at 06:41 on Jul 13, 2021 |
# ? Jul 13, 2021 06:24 |
|
jooky posted:I recently picked up a Salsa Warbird Apex 1 and was looking into upgrading to a power meter, but I'm having a tough time tracking down the actual bottom bracket used on the bike. Per the spec sheets it's a BB86 PressFit, but can't find any specifics beyond that. Trying to figure out if I could use the Rival AXS cranks with the current bottom bracket, but having trouble sussing that out. Assuming I'd need to swap out the BB, but does anyone have an idea? The Rival AXS PM only comes in DUB and not GXP, so you will be forced into using severely undersized bearings if you go with SRAM’s own bottom bracket. There are weird direct-fit flanged double-row bearings that might be a little bit better, but they don’t use the Delrin shims I just mentioned (ultimately not the end of the world, but something to think about.) Also I am not aware of anyone who makes 11spd chainrings for AXS 107bcd spiders. I think your best option is a 5-bolt Quarq with Force-level D2 crankarms…GXP flavor. Otherwise look into Power2Max options with 24mm cranks.
|
# ? Jul 13, 2021 06:41 |
|
The Wiggly Wizard posted:Do those black ones stay cool? I rode in 90 degree weather with them and they stayed cool when I threw some water on them.
|
# ? Jul 13, 2021 07:15 |
|
It's not really the color of sun sleeves that keeps you cool it's the having some sort of layer between you and the sun that's trapping moisture that's evaporating off while riding.
|
# ? Jul 13, 2021 11:50 |
|
The Wiggly Wizard posted:Do those black ones stay cool? Yep, they’re thin enough I’ve never really noticed much difference.
|
# ? Jul 13, 2021 12:44 |
|
TobinHatesYou posted:The Rival AXS PM only comes in DUB and not GXP, so you will be forced into using severely undersized bearings if you go with SRAM’s own bottom bracket. There are weird direct-fit flanged double-row bearings that might be a little bit better, but they don’t use the Delrin shims I just mentioned (ultimately not the end of the world, but something to think about.) Also I am not aware of anyone who makes 11spd chainrings for AXS 107bcd spiders. I’ve had good success with GXP into Shimano 24mm with a spacer for the 22mm GXP non-drive side TobinHatesYou posted:So SRAM's solution was to shrink the crank spindle by the minimum amount and use .5mm plastic shims in between the spindle and bearing race. These are usually dual-purpose top-hats that also serve as a bearing shield/cover. e.pilot fucked around with this message at 12:50 on Jul 13, 2021 |
# ? Jul 13, 2021 12:45 |
|
e: waaaay beaten
|
# ? Jul 13, 2021 15:18 |
|
Anyone have recs for a good 700x32 mixed use tire? Probably ride a 60/40 road/gravel mix on this bike. I'd like something that rolls and is fairly plush, while maintaining a decent level of puncture resistance. Not set up for tubeless on this bike if that's a consideration. Finally wore through enough of the schwable marathon plus I put on this bike like 8 years ago, and am very much looking forward to replacing them. Never got a flat on these bastards but that's about their only good quality. That and the insufferable number of miles it took to wear them significantly enough to consider replacing them.
|
# ? Jul 13, 2021 15:58 |
|
Math You posted:Anyone have recs for a good 700x32 mixed use tire? Probably ride a 60/40 road/gravel mix on this bike. The Marathon Supreme are better rolling and are lighter than the Marathon plus. Might want to check them out. But they are no gravel tires.
|
# ? Jul 13, 2021 16:07 |
|
Math You posted:Anyone have recs for a good 700x32 mixed use tire? Probably ride a 60/40 road/gravel mix on this bike. This is tougher than a road tire but more tolerable than a "no puncture at all costs" like a Marathon: https://www.ebay.com/itm/PANARACER-PASELA-PROTITE-700-X-32-FOLDING-BLACK-TAN-TIRE-/202999074266
|
# ? Jul 13, 2021 16:15 |
|
|
# ? Jun 8, 2024 08:17 |
|
Math You posted:Anyone have recs for a good 700x32 mixed use tire? Probably ride a 60/40 road/gravel mix on this bike. Clement Strada USH - probably my pick Schwalbe Marathon Mondial - slower, better puncture protection Rene Herse Stampede Pass - super plush, get the standard WTB Expanse
|
# ? Jul 13, 2021 16:15 |