|
Blue Footed Booby posted:Metal, resin, your fingers CA glue is great for bonding photoetch to anything and everything but the part you actually want to glue it to. I still dry heave when I think about the ball-and-chain assemblies from my last project.
|
# ? Dec 29, 2021 18:53 |
|
|
# ? Jun 8, 2024 09:04 |
|
Bloody Hedgehog posted:No. They're not actually glass like the real thing, just plastic you can cut with anything. The nautilus lighting kit and instructions i got from them were excellent.
|
# ? Dec 29, 2021 19:15 |
|
the paradigm shift posted:so if I have tamiya cement what do I need CA glue for? Teeny tiny parts where you can't exert pressure to make a good cement weld.
|
# ? Dec 29, 2021 19:56 |
|
Vorenus posted:CA glue is great for bonding photoetch to anything and everything but the part you actually want to glue it to. I still dry heave when I think about the ball-and-chain assemblies from my last project. Yeah, it's absolutely horrible to work with. I will do anything, including solder pins to PE bits, to avoid having to deal with that frustration.
|
# ? Dec 29, 2021 22:18 |
|
CA - "I can stick anything to anything!" Me - "Okay, stick these two bits together." CA - "Well I don't wanna do it now that you asked me."
|
# ? Dec 29, 2021 23:04 |
|
the amount of times that CA has abandoned its dry instantly for "dries whenever it feels like it" is infuriating
|
# ? Dec 29, 2021 23:15 |
|
I’ve mostly stopped using ca for the most part in favor of mig ultra glue. It’s pva based but seems to hold things together well enough ime.
|
# ? Dec 29, 2021 23:36 |
|
I hate CA glue even though I keep it on hand all the time. It's much better at bonding my fingers to each other, or transplanting my fingerprints to a beautifully finished hull making me have to sand it down than actually bonding the parts I want bonded together. For stuff that wood glue doesn't work on, I switched mostly to different speeds of 2-part epoxy once I finally found a brand that didn't have an overpowering odor that made me ill and permeated the entire house.
|
# ? Dec 29, 2021 23:56 |
|
Bloody Hedgehog posted:CA - "I can stick anything to anything!" So, CA means Cat Adhesive? (Do not glue actual cats with CA glue. Especially without posting pics/videos.)
|
# ? Dec 30, 2021 15:10 |
|
Pierzak posted:So, CA means Cat Adhesive?
|
# ? Dec 30, 2021 15:51 |
|
Pierzak posted:So, CA means Cat Adhesive? Carpal Adhesive.
|
# ? Dec 30, 2021 17:06 |
|
So I've finally started work on painting my first brass locomotive model. Getting a good gloss coat is harder than I expected. After several failures and much paint stripping I think the best method is to use a single action brush, grit blast but no primer, using Scalecoat 1 enamel paint thinned somewhere between 2:1 and 1:1 (paint:thinner). I'm going to try laying coverage with a lower paint flow, then finish with a high flow wet coat to bring out the gloss. That's definitely the hardest part, getting the balance between laying it down wet without putting on enough to get runs. I've been practicing on aluminum roof flashing sheets from home depot and I've managed pretty good results on those but I've had trouble reproducing those results on the model over primer. Advise from a brass locomotive painting group on Facebook seems to indicate Scalecoat 1 doesn't need primer and it's easier to get good results without it so I'm going to try that. I'll post results once I manage to do it properly. I currently only have a double action airbrush (Iwata HP-CS) which I've got for weathering and I've been struggling to get consistent paint flow without just pulling all the way back which gives more flow than I want. I was going to get a Badger 200-NH for a single action brush but it's hard to find and I prefer gravity feed over suction feed for easier cleaning. I found the Iwata HP-M2, which is an odd stubby airbrush with a large gravity feed cup and 0.4 needle, and the only single action brush Iwata makes. It looks odd but it has the features I want and gets great reviews so I'm going to give it a try. Disgruntled Bovine fucked around with this message at 18:24 on Dec 30, 2021 |
# ? Dec 30, 2021 18:12 |
|
Pierzak posted:So, CA means Cat Adhesive?
|
# ? Dec 30, 2021 18:50 |
|
The hpcs is like a .35mm needle. The m2 isn’t that much different. If you’re having paint flow issues with the hpcs you’ll likely have them with the m2. You should try thinning your paint more, or keep slightly increasing your psi until you get consistent paint flow. I have the creos procon sq, which is essentially the same as the iwata m2. It’s a great little airbrush but I wouldn’t say using it is easier than a double action. I primarily picked it up because it’s simple design makes it easy to clean after spraying metallics or primers.
|
# ? Dec 30, 2021 19:00 |
|
I am finally free of this goddamn tank. It's a perfectly okay kit, I just picked it up at the worst possible time. I burned myself out in October and tried to keep going with this one, which was also a major pain in the rear end with the tracks and a lot of the fitment. The wretched thing's been on my bench since, but I forced myself to wrap it up and now I'm free. You can actually see some of the detail on the kit itself, even if the texturing I put in is totally blotted out. Even taking pictures of this thing was like pulling teeth. The functional suspension was not worth it. It's even more of a pain than crappy link-and-length, plus the rear and forward road wheels pull up thanks to the tension on the track, which you can't relax - you get exactly enough links to make one track of one length. Year in review: Minus a couple of planes, including my favorite model of the year, which I gifted to someone. It is possible to make too many tanks, as it turns out.
|
# ? Dec 30, 2021 21:13 |
|
I love CA and use it constantly.
|
# ? Dec 30, 2021 22:01 |
|
the paradigm shift posted:so if I have tamiya cement what do I need CA glue for? With cockpit and other detailed parts, I paint first, then glue. CA is what you want for this. It beats scraping paint off of surfaces to be glued on tiny parts. It is also handy to reglue landing gear when your dumb rear end cat jumps on on your modeling table and lands on your plane and breaks the landing gear off.
|
# ? Dec 31, 2021 02:47 |
|
grassy gnoll posted:Year in review: 2021 Jeep builder can't say it was my best work though.
|
# ? Dec 31, 2021 04:34 |
|
Symetrique posted:The hpcs is like a .35mm needle. The m2 isn’t that much different. If you’re having paint flow issues with the hpcs you’ll likely have them with the m2. You should try thinning your paint more, or keep slightly increasing your psi until you get consistent paint flow. Sorry, when I said I had trouble getting consistent paint flow I meant I have difficulty applying the same amount of paint flow repeatably with a double action brush. I can't quickly stop and restart paint flow repeatably at the same rate.
|
# ? Dec 31, 2021 06:17 |
|
Disgruntled Bovine posted:Sorry, when I said I had trouble getting consistent paint flow I meant I have difficulty applying the same amount of paint flow repeatably with a double action brush. I can't quickly stop and restart paint flow repeatably at the same rate. Ah gotcha. In that case, you might want to consider getting a preset handle for your hpcs if you dont want to commit to an additional airbrush. Single actions like the M2 still require you to fiddle with the needle adjustment screw at the back. Once you get them dialed in its pretty consistent though. Just remember to start spraying away from what youre painting to avoid an initial splatter. If you dont adjust the needle back to the fully closed position, paint can pool near the tip and splatter when you start the airflow.
|
# ? Dec 31, 2021 06:27 |
|
Disgruntled Bovine posted:Sorry, when I said I had trouble getting consistent paint flow I meant I have difficulty applying the same amount of paint flow repeatably with a double action brush. I can't quickly stop and restart paint flow repeatably at the same rate. Instead of seating the needle fully forward before locking it down (and then having to pull back to get paint flow), can you pull it back a bit and then lock it down? That way you'll get paint flow as soon as you press the trigger.
|
# ? Dec 31, 2021 06:49 |
|
A small update to finish the year. This model got stalled first by work getting really busy and then the summer weather being replaced by constant storms and drizzle for 6 weeks. That made getting the body panels clear coated rather difficult but yesterday was a good weather day and I cracked on with it as seen below: I also made a new parts holder out of the cardboard that came in an ikea box and it seems to work fairly well. Today was another good day weather wise so I managed to get the exhaust sprayed. Not generally being a builder of bikes I thought I'd give heat staining a go. For a first attempt I think it came out ok and am certainly happy with the results given most of it will be hidden under the body work on the final model. The process taken is shown below.
|
# ? Dec 31, 2021 07:34 |
|
That's cool as hell! What was the tape masking off though on the exhausts?
|
# ? Dec 31, 2021 07:43 |
|
Bloody Hedgehog posted:That's cool as hell! What was the tape masking off though on the exhausts? A coat of x31 that I put down first cause the welds are a little more gold than the rest of the exhaust
|
# ? Dec 31, 2021 07:46 |
|
SkunkDuster posted:With cockpit and other detailed parts, I paint first, then glue. CA is what you want for this. It beats scraping paint off of surfaces to be glued on tiny parts. I've found for non-structural detail parts post-painting, and photo-etch etc I have mostly moved away from using CA and now use strong PVA like Ammo Mig's Ultra Glue. You get a lot more work-time than CA, it dries more flexibly and less brittle than CA and of course you don't run the risk of the CA 'blooming' and leaving a nasty white frost on your finished surface.
|
# ? Dec 31, 2021 12:11 |
|
tidal wave emulator posted:I've found for non-structural detail parts post-painting, and photo-etch etc I have mostly moved away from using CA and now use strong PVA like Ammo Mig's Ultra Glue. You get a lot more work-time than CA, it dries more flexibly and less brittle than CA and of course you don't run the risk of the CA 'blooming' and leaving a nasty white frost on your finished surface. I’m really liking that glue and it works very well ime.
|
# ? Dec 31, 2021 13:02 |
|
Slugworth posted:my job entails applying ca glue to cats I now have additional questions.
|
# ? Dec 31, 2021 13:57 |
|
tidal wave emulator posted:I've found for non-structural detail parts post-painting, and photo-etch etc I have mostly moved away from using CA and now use strong PVA like Ammo Mig's Ultra Glue. You get a lot more work-time than CA, it dries more flexibly and less brittle than CA and of course you don't run the risk of the CA 'blooming' and leaving a nasty white frost on your finished surface. I should give it a shot. For structural PE I solder anyway.
|
# ? Dec 31, 2021 17:24 |
|
tidal wave emulator posted:I've found for non-structural detail parts post-painting, and photo-etch etc I have mostly moved away from using CA and now use strong PVA like Ammo Mig's Ultra Glue. You get a lot more work-time than CA, it dries more flexibly and less brittle than CA and of course you don't run the risk of the CA 'blooming' and leaving a nasty white frost on your finished surface. This stuff seems to be impossible to find in the US :-(
|
# ? Dec 31, 2021 17:31 |
|
Mod Podge will dry clear and pretty dang strong. If you want to go fancy, you can also get undiluted PVA from bookbinder and archival suppliers for cheap, and it's the same stuff as the AK glue.
|
# ? Dec 31, 2021 18:08 |
|
grassy gnoll posted:Mod Podge will dry clear and pretty dang strong. If you want to go fancy, you can also get undiluted PVA from bookbinder and archival suppliers for cheap, and it's the same stuff as the AK glue. Good to know, thanks.
|
# ? Dec 31, 2021 18:57 |
|
Pierzak posted:I now have additional questions.
|
# ? Dec 31, 2021 22:07 |
|
Dr. Garbanzo posted:A small update to finish the year. This model got stalled first by work getting really busy and then the summer weather being replaced by constant storms and drizzle for 6 weeks. That made getting the body panels clear coated rather difficult but yesterday was a good weather day and I cracked on with it as seen below: That's a darn good looking exhaust, honestly. And I didn't realize GP bikes had birdcages on the exhaust tip - I assume it's to catch large debris that gets barfed out of the engine, like if the valvetrain lets go?
|
# ? Jan 1, 2022 00:15 |
|
Phy posted:That's a darn good looking exhaust, honestly. And I didn't realize GP bikes had birdcages on the exhaust tip - I assume it's to catch large debris that gets barfed out of the engine, like if the valvetrain lets go? Thanks for the compliment. I'm guessing so and just double checked if the other manufacturers have the same set ups and they do. I'm tempted by the newly released tamiya suzuki motogp bike but don't like the extra winglets that got added to the bikes over the last few years
|
# ? Jan 1, 2022 01:47 |
|
SkunkDuster posted:With cockpit and other detailed parts, I paint first, then glue. CA is what you want for this. It beats scraping paint off of surfaces to be glued on tiny parts. Your cat wouldn't be able to do that if you CA glued his paws together.
|
# ? Jan 1, 2022 02:56 |
|
Isn't a cage on the end normally to keep mice and such out of the nice safe tube while it's in storage?
|
# ? Jan 1, 2022 15:41 |
|
Got bored today, and started thinking about expanding my setup once again. I don't have a ton more supplies than the last time I revamped my work area, but I had a lot of stuff tucked away in drawers that I wanted to have closer on hand. Primarily all my basing supplies. So I expanded the left hand side of my area, expanding the single shelf riser I had on the desk to a 3 level riser. A bit rough and ready, but suits me fine. Only about an hour of work too, so a small investment for lots more space. Still might do some tweaking, particularly to add in some insert shelves where this is empty space above/below the paint racks to further increase the storage areas.
|
# ? Jan 4, 2022 12:57 |
|
I covet your workspace.
|
# ? Jan 4, 2022 18:24 |
|
grassy gnoll posted:I covet your workspace. I was coveting the space to have that workspace then I remembered I have all my needs in walking distance and no yard to mow. Still, those racks.
|
# ? Jan 4, 2022 18:46 |
|
|
# ? Jun 8, 2024 09:04 |
|
Bloody Hedgehog posted:Got bored today, and started thinking about expanding my setup once again. I don't have a ton more supplies than the last time I revamped my work area, but I had a lot of stuff tucked away in drawers that I wanted to have closer on hand. Primarily all my basing supplies. So I expanded the left hand side of my area, expanding the single shelf riser I had on the desk to a 3 level riser. I see a lot of diorama turf and stuff on the left shelf. I bought a bunch (but not that much) of stuff years and years ago but only ended up using a tiny little bit to make a base for a model. Do you have any pictures of dioramas you have made with that stuff?
|
# ? Jan 5, 2022 03:53 |