|
3-6 drops for 1/2 liter. I just spin the reels around in the tank a few times and pull the reels out. On 4x5's, I just shake the tank a bit as I can't be bothered to put the lid back on. I got very soft water.
|
# ? Apr 17, 2022 05:00 |
|
|
# ? May 28, 2024 14:49 |
|
Thanks, I'll try hard shaking next time. The last few times I thought about shaking it I worried about accidentally dropping the reel ... but maybe that will add c̴̪͐͒͌͜͜h̸̢͉̟̿̒̒a̴͓̙̾̽̾r̴͔̼̿̓͜a̵̢̢͖̽̈́̿c̵͍̘͓̓́t̸̘̪͉̽̕e̵̟̼͕͌̚̕r̴̘͕͎̾̓̿ to my lovely negatives?
|
# ? Apr 17, 2022 05:14 |
|
Photo flo is 1ml per 200ml. Once I hang my negs, and they've spent 2 minutes soaking in PhotoFlo I pour the same photo flo down them to carry away precipitation/dust/complete the ritual.
|
# ? Apr 17, 2022 08:28 |
|
fired up the OM-1 and shot my first roll of fill in 10 years Untitled by Lawrence Myers, on Flickr Untitled by Lawrence Myers, on Flickr Untitled by Lawrence Myers, on Flickr
|
# ? Apr 22, 2022 01:05 |
|
ORWO have just announced a new film you can buy in individual cassettes instead of only in bulk, exciting times https://www.instagram.com/p/CcxmYQzo7QW/?igshid=MDJmNzVkMjY=
|
# ? Apr 26, 2022 03:52 |
|
Went to Italy for work and on the one day with some free time I got myself a disposale camera to get the proper tourist aesthetic I like how atrociously grainy it gets in dark areas without a flash
|
# ? Apr 28, 2022 20:01 |
|
Not sure if anyone cares, or if this is even the right thread, but after buying a dozen or so photo books and finding most of them only ok, I finally got my mind blown by "New York in Color".
|
# ? Apr 30, 2022 18:20 |
|
who are the photographers included?
|
# ? May 1, 2022 03:20 |
|
bobmarleysghost posted:who are the photographers included? "New York in Color" is just Ernst Haas' work. "Magnum Magnum" is another favorite as it covers the work of many photographers.
|
# ? May 1, 2022 14:38 |
|
theHUNGERian posted:"New York in Color" is just Ernst Haas' work. "Magnum Magnum" is another favorite as it covers the work of many photographers. A selection of his work here and my god, it's great.
|
# ? May 2, 2022 13:51 |
|
Welp, if you ever wondered what would happen if you accidently pour your blix in before your developer when developing C-41, have I got news for you! I pretty much instantly knew I hosed up so I poured out the blix and gave the film a rinse (maybe not enough) before trying the developer (and ruining those chems too), and a handful of the negatives were unaffected, while the others had quite a range of staining but arguably weren't completely unsalvageable?
|
# ? May 5, 2022 05:04 |
|
Post it with a #lomo tag and get depressed when they do the best numbers you've ever had
|
# ? May 5, 2022 06:36 |
|
Any advice for flying internationally with film? I've heard that hand-checking isn't as much of a thing as it is in the US, but also running it through carry-on xray isn't that big of a deal with reasonable film speeds?
|
# ? May 5, 2022 14:02 |
|
dupersaurus posted:Any advice for flying internationally with film? I've heard that hand-checking isn't as much of a thing as it is in the US, but also running it through carry-on xray isn't that big of a deal with reasonable film speeds? YMMV honestly. I've flown with different stocks, but usually nothing faster than 400 and a couple passes through the X-ray machine didn't create any visible issues when I developed. Granted it's only been 2 total passes so if you're flying any more than that it could change things.
|
# ? May 5, 2022 14:19 |
|
I have zero direct experience, but I would label the film as "push to ISO3200" to increase the chances of TSA granting your wish to hand check them.
|
# ? May 5, 2022 14:29 |
|
Don’t most major airports in the US have CT scanners now at the security check? Those will absolutely wreck your film. EDIT: I've had varying degrees of hand checking when I used to travel with film on international flights. I just don't do it anymore after an incident at Haneda Airport. It's been 11 years but it still angers me to this day. VoodooXT fucked around with this message at 20:17 on May 5, 2022 |
# ? May 5, 2022 20:10 |
|
dupersaurus posted:Any advice for flying internationally with film? I've heard that hand-checking isn't as much of a thing as it is in the US, but also running it through carry-on xray isn't that big of a deal with reasonable film speeds? Carry-on Xray will be fine for 99% of film, especially with just a couple passes. CT scanners can do more damage on a single pass. I had no problem flying internationally lately and hand-checking the film, but that was in Japan and Thailand. Your results may vary in the US and/or Europe, where the law is to treat everyone flying as a criminal.
|
# ? May 14, 2022 14:12 |
|
dupersaurus posted:Any advice for flying internationally with film? I've heard that hand-checking isn't as much of a thing as it is in the US, but also running it through carry-on xray isn't that big of a deal with reasonable film speeds? I've had good luck with hand checks at U.S. airports, as a white American being polite with it ready to go in a clear ziplock. I've also done it in Japan, London and Egypt. The only places that flat our refused were Scotland and Luxemburg. aricoarena fucked around with this message at 02:22 on May 19, 2022 |
# ? May 19, 2022 02:12 |
|
Any good YouTube series to recommend for scanning (specifically with VueScan)? I have been shooting film for *checks notes* going on 15 years, have scanned my own stuff for a lot of that, but have generally been pretty lazy and let Epson Scan's auto settings do a lot of the heavy lifting. Today I finally gave in and ponied up for VueScan (my GT-X970 has been gathering dust for literally years since Epson's drivers quit working) and am pulling my hair out just trying to do something as basic as "scan three frames". I also realise I need to understand more about colour correction, etc.
|
# ? May 22, 2022 07:58 |
|
Vuescan kinda sucks.
|
# ? May 22, 2022 08:45 |
|
ImplicitAssembler posted:Vuescan kinda sucks. Yeah, best I can tell it was literally my only option. Every time I changed computers/OS's over the years it became more and more of a battle to get Windows (and by extension, Epson Scan) to recognise the scanner, I've finally had to concede defeat. For some reason the two dudes who run VueScan can write a working driver but Epson can't
|
# ? May 22, 2022 08:53 |
|
I use Silverfast to scan my film. It's the scanning software equivalent of the Sony menu layout. It's overwhelming because of all the options, but once you figure it out, you realize you only need a couple of them and it gets much easier to use.
|
# ? May 22, 2022 14:50 |
|
I use vuescan, in combination with NLP that I use to convert. NLP has a guide for how to set up vuescan in order to get files that work with it. That being said, silverfast is better than vuescan (NLP has guides on how to set that up too).
|
# ? May 23, 2022 16:41 |
|
i scan as 48 bit raws in silverfast and use NLP by the book. it’s great.
|
# ? May 23, 2022 19:59 |
|
bellows lugosi posted:i scan as 48 bit raws in silverfast and use NLP by the book. it’s great. Same except in Vuescan. Scan everything as a 48 bit raw positive with all the color correction/balancing off.
|
# ? May 23, 2022 21:13 |
|
i tried that but *always* had issues with my blue channel getting clipped and the developers were pricks about it
|
# ? May 23, 2022 21:22 |
|
vuescan can do the ir dust removal on raw scans and silverfast can't for some reason, maybe if i gave them more money it can. also, vuescan nicely increments files names so i can enter 22-m4-001-01+.dng into the filename and then it just pumps out files like 22-m4-001-01.dng 22-m4-001-02.dng 22-m4-001-03.dng etc but silverfast is stupid and does 22-m4-001-01.dng 22-m4-001-01 (1).dng 22-m4-001-01 (2).dng having to buy a different (expensive) license for reach scanner is lame as poo poo, lots of scanners come with one for free though so thats nice. nlp does seem to give nicer results with silverfast though. eggsovereasy fucked around with this message at 22:00 on May 23, 2022 |
# ? May 23, 2022 21:55 |
|
Goos news, SIlverfast 9 now does pic_01 pic_02 pic_03 You just gotta give them money to upgrade!
|
# ? May 23, 2022 23:39 |
|
silverfast 6 also did that in batch scans. it’s great software
|
# ? May 24, 2022 02:56 |
|
i think 8 does it for batch scans, but can't batch in a plustek
|
# ? May 24, 2022 03:09 |
|
i’m pretty sure you can but i’m very far from a computer and can’t check. i think i always use batch and gently caress it up sometimes because they’ll both scan 1 frame at a time but batch and single scan use different folders
|
# ? May 24, 2022 03:12 |
|
New load of film Tri-X used to be my black and white film stock of choice. But i'm gonna try and switch to Fomapan 400, because a roll of 135 format costs me €4,50 while Tri-X is €13 these days and often out of stock. Also Velvia. Ordered Provia, got Velvia cause they were out of Provia. There's a first time for everything! I've used the Fomapan 400 only once before in medium format, i really wonder what it looks like in 35mm.
|
# ? May 28, 2022 22:06 |
|
Foma 400 is really like a 200 speed film. 200 is more like a 125. 100 is the only film they have rated correctly. Anyway, from what I've looked at Foma 400 looks great at 200, I just shoot 100 myself but only in medium format and I love it.
|
# ? May 30, 2022 00:24 |
|
I will stan for Foma and I don't care. Foma's regular B&W emulsions are fine if you want a general purpose mono film. There's a bit of grain in the 400 but they all respond well to fast developers like Rodinal and have a lot of exposure latitude. Foma Retropan is loving horrible though.
|
# ? May 30, 2022 12:31 |
|
One of my rolls of Foma 100 was labeled "ASA400" inside the box, so I shot it at ISO200, but once developed I saw that the rebate said "100" and sure enough the pictures were underexposed. I mean, I got lucky in that I actually dig some underexposure in BW (with the right subject), but no way I'll pay money for film with this level of quality control issues.
|
# ? May 30, 2022 14:59 |
|
This picture was taken in 2018. Sigh. Prices in euro of course. This drug store also rebranded actual Kodak Ektar as their own brand for stupidly low prices. Thanks for the advice re: fomapan 400 btw. Good to know to expose it at 200 instead of 400. I prefer overexposing negative films rather than underexposing. LimaBiker fucked around with this message at 18:18 on May 30, 2022 |
# ? May 30, 2022 18:15 |
|
Anyone have an online lab that does ecn-2 processing that they trust/does a good job? Partner has picked up some cine film and darkroom.com doesn't have the equipment for it.
|
# ? May 31, 2022 04:14 |
|
I'm forever salty about Foma 400 because I remember when Arista EDU 400 was Tri-X I did get two rolls of Foma 200 in a bulk buy from someone that sold their MF camera locally, will try rating at 125.
|
# ? Jun 3, 2022 11:28 |
|
My first Hasselblad arrived yesterday. What an absolutely wonderful marriage of elegance, size, and weight. If anyone is interested, I'll be listing an RZ67 Pro II kit for sale in a week.
|
# ? Jun 3, 2022 14:41 |
|
|
# ? May 28, 2024 14:49 |
|
theHUNGERian posted:My first Hasselblad arrived yesterday. What an absolutely wonderful marriage of elegance, size, and weight. If anyone is interested, I'll be listing an RZ67 Pro II kit for sale in a week. Congrats, it’s an excellent camera!
|
# ? Jun 5, 2022 06:38 |