|
LifeSunDeath posted:https://www.youtube.com/watch?v=g5_64r2PR7A drat, that's what a new floor jack is supposed to do? Lifts from 3" to 20"? The old Craftsman three-tonner I've been using since 1998 has a usable range of like 5.5" to 13.5"... Perfect as it just about won't get under the pinch welds of my low car, and then barely gets it high enough to slide a jack stand under the control arm mount. And you're saying i can dispatch that pain in the rear end for like $150? This is a game changer.
|
# ? Aug 22, 2022 03:49 |
|
|
# ? May 10, 2024 07:19 |
|
Quote is not edit
|
# ? Aug 22, 2022 03:49 |
|
NoWake posted:drat, that's what a new floor jack is supposed to do? Lifts from 3" to 20"? The old Craftsman three-tonner I've been using since 1998 has a usable range of like 5.5" to 13.5"... Perfect as it just about won't get under the pinch welds of my low car, and then barely gets it high enough to slide a jack stand under the control arm mount. And you're saying i can dispatch that pain in the rear end for like $150? This is a game changer. I have been using the same craftsman floor Jack for about two decades and the only reason I haven’t upgraded is because I have a Quick Jack lift now. However, my new 2000 Civic somehow doesn’t fit on it (Jack points are too far apart wtf) so if I can’t come up with a solution I’ll buy a new floor jack to supplement. This is good info.
|
# ? Aug 22, 2022 12:10 |
|
I bought that Harbor Freight one he tested and calls decent a couple years ago after using a 40 year old Craftsman that finally ate poo poo and it was a total game changer. Going from 50 pumps to under 10 for full height was like one of those infomercials where it's like "I've been doing it wrong for this long?!?!"
|
# ? Aug 22, 2022 12:19 |
|
I bought one of those Daytona jacks during a harbor freight sale for $120. It's been really nice to use, I couldn't get the craftsman jack under my mustang. Heavy as hell to move around, though.
|
# ? Aug 22, 2022 13:51 |
|
Ambassadorofsodomy posted:Which is the brand lower than hazard fraud? a brand you've never heard of, being sold on Amazon
|
# ? Aug 22, 2022 14:33 |
|
Thirding the harbor freight daytona and aluminum race jacks being really good, almost everything everywhere comes from the same crapbox factories in china but HF got burned bad enough on the jackstands that they're actually cherry picking only the best units now
|
# ? Aug 22, 2022 14:42 |
|
honda whisperer posted:Seconding this book. It's a great read. "Not get the concept", which is in actuality "Not wanting to accept that they were cheaping out". That was one of the big takeaways for me; the feigned ignorance.
|
# ? Aug 22, 2022 16:44 |
|
LifeSunDeath posted:https://www.youtube.com/watch?v=g5_64r2PR7A It's weird when a Harbor Freight jack is the better one. Interesting that the Husky is exactly the same jack as the cheaper HF. That HF Daytona is a pretty nice looking jack. I like that Arcan aluminum jack, though, at the same price. $1K for the Snap-On is just silly. Ambassadorofsodomy posted:Which is the brand lower than hazard fraud? Maasdam, apparently. I know it's weird, by HF is actually becoming something like a decent quality bargain. Costs a bit more than they used to, but they're also better (depending on product line - they've introduced a lot of new "brands.")
|
# ? Aug 22, 2022 18:15 |
|
Darchangel posted:I like that Arcan aluminum jack, though, at the same price. I had one of the Arcan "hybrid" jacks from Costco forever ago that was much cheaper than the Daytona, and I liked it a lot. The only reason I replaced it with a Daytona is because the extra inches of lift really helps out when working on Jeeps. HF is in a weird spot now. There are some products where they're anywhere from "competitive" to "class leading" like toolboxes and floor jacks where anything better comes with massive price increases. Then there's some that are still just garbage-tier poo poo. The battery tools are in a weird spot because it looks like they're getting more competitive, but their pricing is now pretty close to in line with Milwaukee / Dewalt as a result.
|
# ? Aug 22, 2022 21:03 |
|
This engine is purring. https://www.youtube.com/watch?v=_0ok8IpjYFU
|
# ? Aug 23, 2022 15:09 |
|
hell kitten
|
# ? Aug 23, 2022 15:24 |
|
https://www.fox5dc.com/news/recall-hyundai-kia-fire-risk-some-suvsquote:DETROIT - Hyundai and Kia are telling owners of some of their large SUVs to park them outdoors and away from buildings after a series of fires involving trailer hitch wiring. What a choice, park inside and burn your house down, or park outside and have your car stolen in 30 seconds by a child.
|
# ? Aug 25, 2022 05:54 |
|
My wife was looking at the Telluride to replace her old Optima but went a different direction. Another fire risk recall would have just been great if we had bought one since this is how her Optima went out a few months back
|
# ? Aug 25, 2022 17:50 |
|
IOwnCalculus posted:I had one of the Arcan "hybrid" jacks from Costco forever ago that was much cheaper than the Daytona, and I liked it a lot. The only reason I replaced it with a Daytona is because the extra inches of lift really helps out when working on Jeeps. And they have like 4 "brands" of battery tools that span that same range of crap-to-nice.
|
# ? Aug 25, 2022 18:39 |
|
Darchangel posted:And they have like 4 "brands" of battery tools that span that same range of crap-to-nice. Yup. That's the other reason I wouldn't ever recommend anyone buy HF battery power tools. "The brands are made up and the points don't matter" is fine for most HF tools, but problematic here. I don't want to spend $Milwaukee on a power tool unless I'm getting Milwaukee-level of support for replacement batteries in the future.
|
# ? Aug 25, 2022 18:49 |
|
IOwnCalculus posted:Yup. That's the other reason I wouldn't ever recommend anyone buy HF battery power tools. "The brands are made up and the points don't matter" is fine for most HF tools, but problematic here. I don't want to spend $Milwaukee on a power tool unless I'm getting Milwaukee-level of support for replacement batteries in the future. As a home handyman, and not a pro, I’m just fine with Ryobi’s One+ stuff for the most part. There’s a few tools the form factor of the battery is a limiting factor (mainly the ratchet) but generally no problem. It’s also very nice to be able to buy the old “blue” tools cheap used on eBay and Marketplace, and be able to use the new lithium batteries with them. I also have some B&D Firestorm stuff I got an adapter for so I can use the 20V Max batteries. For the ratchet, I just got a Husky one with a non removable battery. Works fine, and was a lot cheaper and less bulky than other options. The only other one that can close size wise was the Milwaukee M12, and they’re $$$ of course, even before you get to the batteries.
|
# ? Aug 25, 2022 19:21 |
|
I get what you mean about the Ryobi ratchet, though the head rotates to four locking positions 90º apart so while it's way harder to maneuver than a normal ratchet it hasn't been an issue.
|
# ? Aug 25, 2022 20:06 |
|
Oddhair posted:I get what you mean about the Ryobi ratchet, though the head rotates to four locking positions 90º apart so while it's way harder to maneuver than a normal ratchet it hasn't been an issue. I got this little guy: https://www.homedepot.com/p/Husky-3-8-in-Drive-12-Volt-Lithium-Ion-Cordless-Ratchet-H38CPRAT/305713305 (or maybe an earlier model of it.) Pretty sure I only paid $70-80 for mine, but I could be wrong. Ryobi is $100 w/o battery. *Significantly* smaller than the Ryobi (with battery.) On top of that, the Ryobi wasn't available in the US at the time. It became available, finally, shortly thereafter.
|
# ? Aug 25, 2022 21:25 |
|
|
# ? Aug 26, 2022 22:50 |
|
if that's used to move the boat around from like dock to dock, sure. anything above 5mph or so? no loving way
|
# ? Aug 26, 2022 22:58 |
It's like a Dr. Seuss machine
|
|
# ? Aug 27, 2022 00:09 |
|
https://i.imgur.com/7ngNpcB.mp4
|
# ? Aug 28, 2022 23:55 |
|
Literally everyone there is a dummy, but I'd go beat the damned truck driver senseless for being the dumbest of the dumb. "AYUP! Just gonna head off at top speed and never stop! YUP!" Owner got his dummy cure by not being in the driver's seat. Just holy poo poo the concentrated dumbass in that video.
|
# ? Aug 29, 2022 20:22 |
|
https://i.imgur.com/X0zFeGc.mp4 LifeSunDeath fucked around with this message at 04:25 on Aug 30, 2022 |
# ? Aug 30, 2022 04:11 |
|
right click -> save video link -> paste
|
# ? Aug 30, 2022 04:17 |
|
I think that's what the eStop button is for buddy.
|
# ? Aug 30, 2022 10:55 |
|
Tongue weight: uhhhhhhhhh
|
# ? Aug 30, 2022 11:15 |
|
They have circle K in wherever the crap has plates like that?
|
# ? Aug 30, 2022 18:50 |
|
glyph posted:They have circle K in wherever the crap has plates like that? Circle K is everywhere m8
|
# ? Aug 30, 2022 18:58 |
|
glyph posted:They have circle K in wherever the crap has plates like that? Norway? Yeah, they bought all the Statoil stations some years back.
|
# ? Aug 30, 2022 19:16 |
|
Strange things are amiss at the Circle K
|
# ? Aug 30, 2022 20:00 |
|
Circle K goes hard in Japan. ngl. Maybe even better than Family Mart. Lawson is still top tho.
|
# ? Aug 30, 2022 21:23 |
|
Computer viking posted:Norway? Yeah, they bought all the Statoil stations some years back. It's Denmark, all the Statoil stations were bought by Circle K here, too. You can look up the license plate here, and the pictures of the car are literally from that video https://www.nummerplade.net/nummerplade/cv97086.html
|
# ? Aug 30, 2022 21:25 |
|
I thought you still had a red line around the license plate - did that disappear, or is it just hard to see in the video? And yeah that explains why that plate wasn't in the system when I looked it up here. e: Now that I'm on a large screen - and know what I'm looking for - those national letters on the plate look a lot more like DK than N, too.
|
# ? Aug 31, 2022 00:00 |
|
Is this timing chain supposed to.look like this?
|
# ? Sep 3, 2022 03:00 |
|
Elviscat posted:Is this timing chain supposed to.look like this? It's pining for the fjords.
|
# ? Sep 3, 2022 03:06 |
|
That's just some extra slack so the engine can grow into it.
|
# ? Sep 3, 2022 04:04 |
|
Elviscat posted:Is this timing chain supposed to.look like this? it's obviously supposed to have big fat cams on there, you've done it wrong
|
# ? Sep 3, 2022 04:46 |
|
|
# ? May 10, 2024 07:19 |
|
I know it looks cute but timing chains only do this when they are very distressed.
|
# ? Sep 3, 2022 05:18 |