|
Project M.A.M.I.L. posted:It is, however, required by law that when ever you put on the Lobster gloves you try to click them together, and do the "whoob woob woob woob" Zoidberg sound.
|
# ? Nov 22, 2022 21:34 |
|
|
# ? Jun 3, 2024 11:03 |
|
evil_bunnY posted:To this day my kids want to do the pinch check when they put mittens on. The kids are alright
|
# ? Nov 23, 2022 08:50 |
|
I had a puncture this morning in freezing temps. Brand new Schwalbe winter marathon PLUS tire, new and exciting failure mode: Never had this happen before. The old non-PLUS schwalbe tires would fail when the studs worked themselves out on the inside after a few thousand kilometers, but this is something else. All I can think of is that I trashed the tire when I had the snakebite two weeks ago on a dislodged manhole cover. If not that it has to be some kind of manufacturing defect. Also flats really suck when it's cold and you forgot to replace the work gloves in the toolkit from last roadside repair.
|
# ? Dec 5, 2022 09:53 |
|
Invalido posted:I had a puncture this morning in freezing temps. Brand new Schwalbe winter marathon PLUS tire, new and exciting failure mode: You're well on your way to studded tires!
|
# ? Dec 5, 2022 22:46 |
|
Safety Dance posted:You're well on your way to studded tires! It already was a studded tire. He's showing that the stud failed and punctured through to the inside.
|
# ? Dec 5, 2022 23:56 |
|
Had 5000 miles on my first set of Marathon+, never had any flat. I think it was 2.2" wide Now I am going with fat tire mr tuffie tire liner + flatout sealant. I didn't want to get a fat tire bike, but most of the ebike I was shopping only have fat tire option, so I said gently caress it and went fat tire.
|
# ? Dec 5, 2022 23:58 |
|
bicievino posted:It already was a studded tire. He's showing that the stud failed and punctured through to the inside. Whoops! My mistake!
|
# ? Dec 6, 2022 00:06 |
|
I had the same failure, got a refund on the tire because it was only a few months old and went with a different brand. If you can I'd suggest you do the same, this isn't all that uncommon.
|
# ? Dec 6, 2022 04:31 |
|
EvilJoven posted:I had the same failure, got a refund on the tire because it was only a few months old and went with a different brand. If you can I'd suggest you do the same, this isn't all that uncommon. Thanks, I'm gonna try to get a refund or at least a replacement , hopefully from a different batch. Was your failure on a winter marathon+ as well? I've run this tire for many winters, and in my experience that doesn't look right at all. I've torn a bunch of studs out of the tire already in different places too, while the front tire looks fine. On this particular bike the rear has a pretty hard life but the previous exact same model tire aged with grace and didn't have stud failures like this one at all. Not excited about changing brands since all the other kinds I've tried have been worse than my usual Schwalbe experience. It's not like there's a huge selection on the market either.
|
# ? Dec 6, 2022 06:54 |
|
Mine was a regular winter marathon but when I worked in bikes we saw that happen to both types. Get some 45n Gravdals or Xerxes. They seem good. It's a shame Conti discontinued the Nordic spikes I really like mine but the studs are ground down to almost nothing at this point. I hear their non studded top contact winter tires suck. I'd get some Gravdals myself but I'm done with winter commuting. It's not the cold it's the fact that post Covid the mean drivers are worse and last winter I spent too many commutes dealing with hostile drivers.
|
# ? Dec 6, 2022 14:48 |
|
That sucks. I'm fortunate enough that I don't really have to share space with cars to any significant degree on my commute. The biggest issues they cause me are their blinding headlights in the dark and the occasional spray shower when it's raining. Pedestrians and other riders are a different story, but they only slow me down and won't murder me. I've tried continentals but as you said the studs were subpar. I've ran Nokian and Suomis after they changed name. Good studs and good grip when new but I had an explosive rupture at spec pressure on a Suomi, sounded like a gunshot and scared me more than a little. Not to mention the no-name chinesium ones from the local harbor freight equivalent. Never heard of 45Nrth as a brand before. They're hard to find here but they exist. Interestingly enough googling it lead me to to find a consumer test of winter bike tires from 2018 (something I've never seen before) where the verdict was more or less "meh" FWIW. What makes it even more tricky is finding tires for my e-bakfiets which has uncommon dimensions at 20" front and 24" rear. On my 29er there's plenty to choose from though. Linky to the test btw, guess one could google lens it for translation from swedish maybe: https://www.testfakta.se/sites/default/files/2018-10/Grafik_cykeldack%28181018%29.pdf
|
# ? Dec 6, 2022 16:35 |
|
45nth is a QBP brand, I don't think they have nearly as much of a presence in europe as in north america.
|
# ? Dec 6, 2022 19:13 |
|
Yeah 45nth is a pain to get. IMHE schwalbes *are not* durable but they're the only tire (when you get the high stud count) that combines decent rollin with actual studs near centerline, which are an absolute must on hardpack or soft ice. I just bite the bullet and get a new set every few years. And it's one of the few brands that sells 20" and 26" tires.
|
# ? Dec 6, 2022 21:01 |
|
evil_bunnY posted:Yeah 45nth is a pain to get. poo poo, they even make Brompton size winter tires.
|
# ? Dec 6, 2022 23:55 |
|
Ya it really is sometimes a 'least worst option' situation but that failure mode is common enough I'd go with pretty much anything else if possible. I just checked and Conti apparently decided that their non studded tires do indeed suck rear end so they now have a studded version called the Contact Spike and Terrene has a 700x38 called the Griswold that has 2 rows of studs and you can go to 4 if you decide it's needful.
|
# ? Dec 7, 2022 02:20 |
|
I'm on my fourth(?) winter of daily riding on Schwalbe Ice Spiker Pros. I used my last pair for three years (from first frost to gravel cleanup), and they only got switched out in advance because the studs were starting to get worn down. They're kind of "baggy" in the sidewalls, which is not a type of tire I'm used to, but they didn't develop any significant cracking. My winter bike is outdoors year-round, and Stockholm salts and gravels their bike paths, so I'm ok with 4-5 years on a pair of tires. https://www.schwalbe.com/en/spike-reader/ice-spiker-pro
|
# ? Dec 7, 2022 09:29 |
|
Ice Spikers don't have the issue with the studs cutting through the casing like the Marathon Winters because the studs are in the blocks themselves. They're pretty good if your bike can fit them.
|
# ? Dec 7, 2022 21:29 |
|
I just tried bar mitts after about a decade of winter commuting. -5C, 45 minute ride. Pro: -Toasty fingers with just thin gloves underneath Con: -Getting back on the bar after signaling turns is fiddly now so I signal less and spend more time riding one-handed = less safe -gets in the way when pushing the bike around -muffles the bell so it's worthless (have electric horn too which still works) Verdict: 6/10 will use again.
|
# ? Dec 12, 2022 08:05 |
|
Counterpoint: Bells have been worthless for nearly a decade
|
# ? Dec 12, 2022 08:16 |
|
Nearly worthless. Every once in a while I come across a pedestrian without headphones. It's nice being able to ding the bell before escalating to the horn of there's time. Beeping causes confusion and scares people while a bell unequivocally means "bicycle" in people's minds and isn't percieved as aggressive in my experience.
|
# ? Dec 12, 2022 08:41 |
|
really feeling the cold snap in Europe. it's my 3rd winter in central Switzerland, but the first time I woke up to my bike lock frozen shut. had to haul my it back up into my apartment to quickly defrost the lock with a heat gun, but neglected to check the shifters so I ended up riding fixie all day today
|
# ? Dec 12, 2022 23:46 |
|
Freezing temps are always an issue, moreso when the bike sits outside or in cold storage. For cables I can not recommend this gadget enough: It sits somewhere in the middle of the cable (preferably low down I think) and makes displacing any water in the cable a one minute job using WD-40 or similar. On my bakfiets which almost always lives outside I need to spray the shifter cable regularly (depending on weather) and I wouldn't manage without it. I had a different cold related problem with the bakfiets too last week. -8C and my gearless hub motor was frozen solid. Really solid. When I opened it up there was a tiny amount of water in there - just drops really, but enough to jam up the works - the gap between rotor and stator is sub-millimeter so I guess it doesn't take much. Dried it out and replaced the axle seals since I had some spares on hand, hopefully it won't happen again anytime soon.
|
# ? Dec 13, 2022 09:13 |
|
What is it called? Reverse image search didn’t work.
|
# ? Dec 13, 2022 09:25 |
|
kimbo305 posted:What is it called? Reverse image search didn’t work. https://www.biketown.se/sv/articles/2.202.17638/shimano-t-koppling-nexus-vaxelvajer
|
# ? Dec 13, 2022 09:35 |
|
Sadly I can't find it on amazon or similar, it seems like near unobtanium. Searching for RSMNX10 brings up a few results but nothing spectacular. Sadly it only fits shifter cables. A colleage who has cable brakes could really use some, but the outer sheath is to thick to fit in the t-piece. The ends of the t-piece could probably be drilled out a bit I suppose, but the real solution for brakes freezing is to go hydraulic IMO. Perhaps I should add that once fitted, it helps a bunch to have the right kind of nozzle on the spray can. The thin, long plastic straws are usually to skinny to seal well in the spray port. I've had better results with the ones that look sort of like this: The port hole (plugged by the allen screw) is conical and once you get a good seal to the spray can it's usually possible to force lube in there until it comes out both ends of the cable even if there's a little bit of ice in there. Otherwise I have to thaw the cable first.
|
# ? Dec 13, 2022 10:07 |
|
Invalido posted:... I am curious, can you deal with the freezing by taking a hair dryer or heat gun to the motor? Gearless hub motor like a direct drive?
|
# ? Dec 13, 2022 12:16 |
|
stephenthinkpad posted:I am curious, can you deal with the freezing by taking a hair dryer or heat gun to the motor? Gearless hub motor like a direct drive? even if it was safe for the motor, wouldn't you risk it happening again later in the day if it's cold enough? taking it apart sounds like a pain in the rear end, but also seems like a better move long-term
|
# ? Dec 13, 2022 12:31 |
|
stephenthinkpad posted:I am curious, can you deal with the freezing by taking a hair dryer or heat gun to the motor? Gearless hub motor like a direct drive? Probably. I poured some warm water on it (careful not to get any on the axle seals) and got it going just to see if it would work, which it did - I wanted to verify that it was indeed internal icing locking it up before taking it apart. Gearless is the same as direct drive, yes. Hub motors are easy to disassemble generally, there are YouTubes showing how it's done though the direct drive ones are a bit scary due to the powerful permanent magnets unless you have a large enough three armed puller so you can do it slowly with control.
|
# ? Dec 13, 2022 13:59 |
|
webcams for christ posted:even if it was safe for the motor, wouldn't you risk it happening again later in the day if it's cold enough? taking it apart sounds like a pain in the rear end, but also seems like a better move long-term But during the afternoon commute hour, the temperature pick up a lot. I now have an ebike with enough battery to do the commute roundtrip (20AH), so I only charge at work, where we have ebike/e-motorcycle/scooter charging outlets outdoor. I charge from 12 noon to 3pm during the warmest period in the winter. Supposedly you don't want to charge lithium battery below freezing temperature. New York only go down to a few degrees below freezing in the coldest days so I don't have to worry about motor freezing. Invalido posted:Probably. I poured some warm water on it (careful not to get any on the axle seals) and got it going just to see if it would work, which it did - I wanted to verify that it was indeed internal icing locking it up before taking it apart. Gearless is the same as direct drive, yes. I guess I would do it if my work depends on it like I am a full time uber delivery man, but for commute purpose I would just skip the coldest days. I have a similar story about winter freezing the equipment. I had a portable lithium tire inflator that uses type of cheap LCD display that stop working in cold weather. You can still use it but you can see the air pressure. Didn't know cheap LCD screen does that until I encountered it. Went back to normal 12v car powered air pumps. Turned out I just need too replace the "air chuck" to fix the old pump. I am still waiting for China to come up with a big gadget that can 1, does engine start, 2 does air pump 3 does vacuuming 4 has a large replaceable lithium battery, that will replace all my car gadgets. stephenthinkpad fucked around with this message at 14:31 on Dec 13, 2022 |
# ? Dec 13, 2022 14:21 |
|
FYI for freezing cables run some lock deicer down the housing it helps some.
|
# ? Dec 13, 2022 14:24 |
|
Does anyone have a recommendation for a helmet with integrated lights? Are there any that are worth using? I need a new helmet anyway and I've seen some of those setups around town that look useful. Currently I've got a removable light mounted to my standard helmet but it's really clunky.
|
# ? Dec 13, 2022 19:21 |
|
The only good use for a helmet light is to point in the eyes of people with helmet lights.
|
# ? Dec 14, 2022 11:42 |
|
Groda posted:The only good use for a helmet light is to point in the eyes of people with helmet lights. Yep, offroad only.
|
# ? Dec 14, 2022 13:26 |
|
They don't come with adjustmentable lights? My add-on helmet light has a nice pivot feature and I regularly check to make sure I'm not blinding drivers.
|
# ? Dec 14, 2022 17:29 |
|
I just got a helmet light. I turn it off on the MUP but full blaze on the road. (The rear light is really the point - with how tall trucks are I wanted a taillight higher up) bicievino fucked around with this message at 18:40 on Dec 14, 2022 |
# ? Dec 14, 2022 18:23 |
|
i do like a good forward-facing white light on my helmet just to project over parked cars to people pulling out of side streets, the light doesn’t have to be at all bright to get the job done.
|
# ? Dec 14, 2022 22:51 |
|
Gonna do one better and get a LASER helmet so I can gaze at cagers and instantly blind them for life.
|
# ? Dec 14, 2022 23:48 |
|
Absolutely hate helmet lights. Utterly anti-social and I have several considered getting my own only to be used against twats who leave their on at all times and blind everyone they look at. (I had one for night time snowboarding that would probably blind them for a few hours, that I considered using, but switching it on and off was a bit of a pain).
|
# ? Dec 15, 2022 00:55 |
|
I like the idea of marker lights on a helmet but ya if you aren't trail riding at night don't project anything.
|
# ? Dec 15, 2022 01:28 |
|
|
# ? Jun 3, 2024 11:03 |
|
All you need is shoegoo a USB rear red light to the back of the helmet. My front fender already got a bunch of lights I don't need another one on my head.
|
# ? Dec 15, 2022 02:01 |