|
Jonny Nox posted:It’s funny, the comment was meant as a joke, I didn’t mean to kick off a discussion it's good for people to know!
|
# ? Jul 18, 2023 02:39 |
|
|
# ? May 11, 2024 11:58 |
|
Spanish Manlove posted:Why use the old paints instead of modern ones that cover well and have colors that are just as vibrant if not more vibrant? Because more translucent paint is better for layering and some people (me) prefer them It's why I'm the weirdo that prefers Army Painter Warpaints over "better" ranges, they behave like mid-late 90s citadel colour paints
|
# ? Jul 18, 2023 04:51 |
|
Southern Heel posted:Here are my new old style epic Marines, I just can’t decide on a colour scheme: The beauty of
|
# ? Jul 18, 2023 05:14 |
|
currently designing space marine colors, what do you guys think of this? Sadly, try as I might despite that I'm probably going with a 'lion el-johnson' led army I cant bring myself to use green for my space marine army, I like blue far too much, I'm gonna try to keep with my general idea to use islamic teals and blues with the hand motif, with tan-brown highlights. I'll try some other combinations, but this one is a little closer to my tastes.
|
# ? Jul 18, 2023 14:03 |
|
Al-Saqr posted:currently designing space marine colors, what do you guys think of this? I really like the blue, but I dunno about the grey, looks a little drab or flat to me?
|
# ? Jul 18, 2023 15:52 |
|
Al-Saqr posted:currently designing space marine colors, what do you guys think of this? It would be a serious test of your free hand, but what about doing azulejo tile designs instead of the tan colors?
|
# ? Jul 18, 2023 16:16 |
|
Jack B Nimble posted:I really like the blue, but I dunno about the grey, looks a little drab or flat to me? You mean the tan parts? I agree i think they look kinda dull, i guess ill try an off white or white, i just dont wanna be too ultramarinish, i tried the teal but it looked a little too much, ill come up with some more options and get back to you Spanish Manlove posted:It would be a serious test of your free hand, but what about doing azulejo tile designs instead of the tan colors? I guess i can try just making the tan parts white or slighly off white. But lol i could never do azulejo
|
# ? Jul 18, 2023 16:58 |
|
Just based off a quick google, I now want to try doing azulejo even if I'm terrible at free-handing! Do y'all think it would be feasible to try to sketch the outlines in a fine-point sharpie or something first, and then paint in the lines afterward? I'm trying to think of ways to make it a little easier to free hand since I can't really print transfers to order.
|
# ? Jul 18, 2023 17:17 |
|
Al-Saqr posted:currently designing space marine colors, what do you guys think of this? I like the colours overall, darker red & tan & teal all work together well as a set. Kind of hard to pick what I'd aim for with the exact shades from just a mockup (particularly the main blue, going to be tricky finding the right one for that), though I do think I would be doing something like this with a very matte finish. I might also try putting the skull and wing symbols on the chest and gun in the tan for some other mockup and seeing if you like that. Maybe also try; the hands in blue, and the wrist section in tan? A last thing not colour related, the little roundel on the helmet could be an issue later... there's the minor aspect of a lot of marines having the little rank skull there taking up that area, and then there's... like, even for someone like me who does a bit of freehand on most models, committing to doing that neatly and consistently three? times per marine per however many marines is not going to be a thrilling part of the process. e: Arcturas posted:Just based off a quick google, I now want to try doing azulejo even if I'm terrible at free-handing! Do y'all think it would be feasible to try to sketch the outlines in a fine-point sharpie or something first, and then paint in the lines afterward? I'm trying to think of ways to make it a little easier to free hand since I can't really print transfers to order. YMMV on how much going from brush to pen will help, but if you want to try something like that, look at gundam marker/panel liner, paint pen sort of stuff. The more serious artist targeted type of fineliner and so on are mostly not going to want to draw on a painted surface, and purportedly waterproof or permanent inks aren't 100% going to take being painted over either. Assessor of Maat fucked around with this message at 18:07 on Jul 18, 2023 |
# ? Jul 18, 2023 17:18 |
|
WIP on this Fyreslayer. Not sure about the color choices. I'm happy with the fire, hair and skin, but I'm wondering about the cloak. I kinda like it, but could use some input.
|
# ? Jul 19, 2023 03:19 |
|
Three out of five Demonship minis done Just have the two Blade Demons left. Right now they're red, but I dunno, I might redo them in orange to keep things bright.
|
# ? Jul 19, 2023 03:23 |
|
Verisimilidude posted:WIP on this Fyreslayer. Not sure about the color choices. I'm happy with the fire, hair and skin, but I'm wondering about the cloak. I kinda like it, but could use some input. it rules. keep it as is.
|
# ? Jul 19, 2023 03:23 |
|
Verisimilidude posted:WIP on this Fyreslayer. Not sure about the color choices. I'm happy with the fire, hair and skin, but I'm wondering about the cloak. I kinda like it, but could use some input. Your mini appears to have caught fire. Might wanna take care of that.
|
# ? Jul 19, 2023 03:52 |
|
Verisimilidude posted:WIP on this Fyreslayer. Not sure about the color choices. I'm happy with the fire, hair and skin, but I'm wondering about the cloak. I kinda like it, but could use some input. You made teal and burgundy work, take the W
|
# ? Jul 19, 2023 05:06 |
|
Base him up, job’s a good’un.
|
# ? Jul 19, 2023 06:58 |
|
So far I've been doing base coats of citadel (Russ Grey) like back in the day and I'm wondering if things would look better primed properly. I'm not really in a situation where I can gently caress about with spray paint so I'll probably get some to brush on? Only thing I'm wondering is if that's something safe to do and let dry indoors? If not I'll stick with my paints. Not having access to a garage or a garden is a bit limiting..
|
# ? Jul 19, 2023 10:37 |
|
Just brush prime
|
# ? Jul 19, 2023 10:52 |
|
the Vallejo primers brush on fairly well, and doing a black all-over prime followed by grey and white drybrushes is a pretty effective alternative to a Zenithal.
|
# ? Jul 19, 2023 11:10 |
|
Thanks, got some on the way
|
# ? Jul 19, 2023 12:31 |
|
tried a bunch of color schemes using an app that uses only vallejo paints, the tan is too dull so I went with a blue-green teal, trying both blue and ultramarine, which one to you guys think is best overall? the app isnt specific enough for every little bit so there might be some differences like wrists and fingers and such. 1 2 3 4 I think overall I like 4 the best, that's probably the scheme I'll go with.
|
# ? Jul 19, 2023 13:51 |
|
Make the teal color less saturated, it has a problem where there's almost no tonal contrast between the two.
|
# ? Jul 19, 2023 14:01 |
|
Al-Saqr posted:tried a bunch of color schemes using an app that uses only vallejo paints, the tan is too dull so I went with a blue-green teal, trying both blue and ultramarine, which one to you guys think is best overall? I would try doing a test model first. I see a lot of these schemes posted and they rarely come to fruition because they’re so complicated. Try painting one model and see if it’s feasible for you to paint a whole squad in that color pattern.
|
# ? Jul 19, 2023 14:12 |
|
Spanish Manlove posted:Make the teal color less saturated, it has a problem where there's almost no tonal contrast between the two. ok! now I think it's coming together! the desaturated teal looks much better! now I'll actually try painting one of my intercessors as an actual trial run and see what happens!
|
# ? Jul 19, 2023 14:22 |
|
Whichever you choose I think you're going in the right direction; I know you're not trying to please me specifically but for whatever it's worth I like these a lot more. I prefer either one or four, the middle two have too much teal. I don't actually see the difference between one and four? I've thumbed back and forth several times like one of those spot the difference games, I'm going to feel silly when someone points it out. I had wanted to ask the thread for advice; I need to pick out the plasma coil bits on some imperial fists and I stupidly painted the whole plasma gun black, if I'm careful to leave the coils white going forward it should be easier. So, what are the basic steps to go from black to a reddish orange in a few steps? Grey to brown to orange?
|
# ? Jul 19, 2023 14:23 |
|
Verisimilidude posted:I would try doing a test model first. I see a lot of these schemes posted and they rarely come to fruition because they’re so complicated. Try painting one model and see if it’s feasible for you to paint a whole squad in that color pattern. I would second this sentiment; I am painting the Space Marines I have up to match what my son thought would be the coolest looking. They have a main color with knee areas, hands, helmets, shoulder pad accents in a different color. It is actually a little bit of a pain in the rear end to paint them, and had they been more unicolor I think I would have many, many more done by now. That being said I kind of like the scheme my son chose.
|
# ? Jul 19, 2023 18:37 |
|
Female space marines? God I’m so angry (cool scheme btw)
|
# ? Jul 19, 2023 20:10 |
|
a fatguy baldspot posted:Female space marines? God I’m so angry (cool scheme btw) Thanks! I was really unsure about it at the start, but as my painting has improved I think they are starting to look pretty good. I even made a matching display board for them, I will upload a picture of sometime. My next 40k Army I think is some aquatic themed death guard minis I found to print out. I found a plagueburst crawler that looks like a crab! There is a whole line of "dredge" themed death guard that I am super interested in. I really enjoy 3d printing, but when I make stuff a lot of time I am looking for really distinct and unique versions of an army, almost a re-imagination (except for my DKOK), and death guard seems to almost always be trapped in one specific aesthetic, so this underwater one really calls to me.
|
# ? Jul 19, 2023 20:34 |
|
Still practicing on random minis I found in the attic. This HeroQuest Chaos wizard was missing a hand but I had an old zombie hand to repair him.
|
# ? Jul 19, 2023 21:58 |
|
chaos wizard swole as hell
|
# ? Jul 19, 2023 22:35 |
|
you don't get lats that huge without potions
|
# ? Jul 19, 2023 23:24 |
|
I've been putting some transfers on my Thousand Sons by brushing some Pledge in place of Ardcoat or similar first for adhesion. Got them on okay, but the shoulder is noticeably glossier than the rest of the mini. So a few things: Will things even out if I spray a matt varnish over the whole thing? I guess Ardcoat or a cheaper alternative from another brand. If I elect to make the whole thing glossy, which may be no bad thing as it's metallic, can I run Pledge through an airbrush okay? Dunno if I should mask the tabards or maybe just brush it on. What's a good alternative to GW Ardcoat? And will a matt finish look right on metallics?
|
# ? Jul 20, 2023 02:38 |
|
BizarroAzrael posted:I've been putting some transfers on my Thousand Sons by brushing some Pledge in place of Ardcoat or similar first for adhesion. Got them on okay, but the shoulder is noticeably glossier than the rest of the mini. So a few things: I would recommend doing another coat of pledge to even out the edges of the transfer so they appear to sit flush with the model and to make sure it is fully adhered, then spraying with matt varnish. I've had instances where I have applied gloss/pledge, applied then transfer then sprayed matt varnish and the transfer has come partially/fully off the model, or the solvent from the tin of varnish has melted parts of the transfer. Case in point:
|
# ? Jul 20, 2023 03:56 |
|
Finished this slayer, and trying to work out some photos with a different colored background as well.
|
# ? Jul 20, 2023 05:11 |
|
IncredibleIgloo posted:I would second this sentiment; I am painting the Space Marines I have up to match what my son thought would be the coolest looking. They have a main color with knee areas, hands, helmets, shoulder pad accents in a different color. It is actually a little bit of a pain in the rear end to paint them, and had they been more unicolor I think I would have many, many more done by now. That being said I kind of like the scheme my son chose. Hell Yeah Purple Marines!
|
# ? Jul 20, 2023 06:05 |
|
painting some more 6mm shanty houses a little shanty: graffiti covered building: taxi building and some more graffiti:
|
# ? Jul 20, 2023 16:40 |
|
Nebalebadingdong posted:painting some more 6mm shanty houses Is that freehand?
|
# ? Jul 20, 2023 17:01 |
|
notaspy posted:Is that freehand? yes
|
# ? Jul 20, 2023 17:03 |
|
Nebalebadingdong posted:painting some more 6mm shanty houses I never knew I wanted to play 6mm Necromunda until now
|
# ? Jul 20, 2023 17:27 |
|
Big Willy Style posted:I would recommend doing another coat of pledge to even out the edges of the transfer so they appear to sit flush with the model and to make sure it is fully adhered, then spraying with matt varnish. I've had instances where I have applied gloss/pledge, applied then transfer then sprayed matt varnish and the transfer has come partially/fully off the model, or the solvent from the tin of varnish has melted parts of the transfer. Case in point: Thanks, but I think that looks cool! So another layer of Pledge will smooth it out? Because they look a little uneven (can't feel it under my finger though) but I was waiting on some Microsol/set to deal with that, will more Pledge just sort it out? Here's the squad, quite pleased with the desert bases but think I can get them better going forward, although I've just noticed this angle doesn't show much of the cracked earth on them. Can do a little more with the tabards I think, I just don't want it to be a very sharp contrast, just add a little shape to them. Going to add the scarab markings from the TS/Space Wolf 30k sheet to the other shoulders but will need to get the big £20 legion sheet for other squads. Although I was thinking I might use other colours than gold on the shoulders as a squad marking. BizarroAzrael fucked around with this message at 17:56 on Jul 20, 2023 |
# ? Jul 20, 2023 17:33 |
|
|
# ? May 11, 2024 11:58 |
|
I see everyone talking about Pledge floor varnish, but I can't seem to find it on Amazon for less than like $60, which seems like not what you're actually talking about. Would something like QUICK SHINE 64 oz. Floor Polish Finish, available from my local Home Depot for $12-ish, be the same? I'd love to have a paint-on gloss varnish but I am not thrilled with the idea of spending $60 for it.
|
# ? Jul 20, 2023 17:40 |