|
Geisladisk posted:I'm pretty sure Vallejo decal softener and Decal Fix are exactly the same stuff as Microsol/set. It probably is, but seems to be less goopy in consistency.
|
# ? Mar 31, 2024 12:03 |
|
|
# ? Jun 6, 2024 08:21 |
|
Decals are so last spring's fashion. For space marine shoulder pads at least, it's really easy to find the files online for every chapter's shoulder icon and I use a resin printer to print up just the shoulder pads with the icons as raised, physical details then I give them a layer of paint on top of the raised surface. I then usually tear the model apart and drop the ruined bodies around the bases of my Tyranids where they belong but that's just me. Your mileage may vary.
|
# ? Mar 31, 2024 14:38 |
|
bird food bathtub posted:Decals are so last spring's fashion. For space marine shoulder pads at least, it's really easy to find the files online for every chapter's shoulder icon and I use a resin printer to print up just the shoulder pads with the icons as raised, physical details then I give them a layer of paint on top of the raised surface. I then usually tear the model apart and drop the ruined bodies around the bases of my Tyranids where they belong but that's just me. Your mileage may vary. This is in the same spirit as "just spend $300 on a thing you don't have space for, don't have time to calibrate, don't have time to trouble shoot, and don't feel like bearing people talk about as an easy solution to anything." It's basically on par with "get good at free hand"
|
# ? Mar 31, 2024 15:21 |
|
Spanish Manlove posted:This is in the same spirit as "just spend $300 on a thing you don't have space for, don't have time to calibrate, don't have time to trouble shoot, and don't feel like bearing people talk about as an easy solution to anything." I think their statement was pretty obviously a bit tongue in cheek.
|
# ? Mar 31, 2024 15:25 |
|
Download an stl of a better joke
|
# ? Mar 31, 2024 15:28 |
|
Just like regular printers, the best way to use a 3D printer is to be friends with someone who has one
|
# ? Mar 31, 2024 15:30 |
|
moths posted:If you have a mind to, you've already got a Militia list. It's my understanding that every world was required to provide forces for the Crusade, it's just Guilliman was asking for additional forces given the whole traitorous tomfoolery going on that the Vostroyans refused to provide. So there's nothing saying Vostroyans weren't already involved.
|
# ? Mar 31, 2024 15:31 |
|
Professor Shark posted:Just like regular printers, the best way to use a 3D printer is to be friends with someone who has one That is true! I print stuff for people all the time and it is never an issue. But for those without friends with printers Etsy also has a lot stores that provide printed parts as well, and they typically are not that expensive compared to official upgrade sprues.
|
# ? Mar 31, 2024 15:36 |
|
moths posted:If you have a mind to, you've already got a Militia list. Thanks so much for this, this is exactly what I'm going to do. There are a couple folks in my area that play HH and I know they want more people, I'm sure they'll thank you too!
|
# ? Mar 31, 2024 15:42 |
|
Wonderful! I think you're really going to enjoy it - it's a totally different experience, despite all the superficial similarities.
|
# ? Mar 31, 2024 16:25 |
|
it's a sign
|
# ? Mar 31, 2024 16:28 |
|
So GW's twitter account still runs on winter time, because they posted the tweet for next week's pre-orders an hour early. The article link was dead, but there was still a pretty decent hint in the post itself. The Night Lords vs Mandrakes KT box is going up for pre-order next Saturday.
|
# ? Mar 31, 2024 17:06 |
|
They're really trickling out those LVO announcements, still a Custodes box to go too.
|
# ? Mar 31, 2024 17:37 |
|
Virtual Russian posted:Thanks so much for this, this is exactly what I'm going to do. There are a couple folks in my area that play HH and I know they want more people, I'm sure they'll thank you too! The Geno 5-2 Chiliad from Legion as described would be very similar to the Vostroyans with the big fur shakos, coats and armour.
|
# ? Mar 31, 2024 17:54 |
|
https://www.warhammer-community.com/2024/03/31/sunday-preview-nightmares-pyres-and-gnomes/ So yeah, Kill Team: Nightmare goes up for pre-order next Saturday. But you can also get display boxes* for your favourite space marine models. *Not limited to Space Marine models, will also come in 30 different sizes.
|
# ? Mar 31, 2024 18:07 |
|
My Imperial Fists with decaled shoulder pads look way better than my Tor Garadon with a sculpted one but that might just be me
|
# ? Mar 31, 2024 18:10 |
|
Professor Shark posted:Just like regular printers, the best way to use a 3D printer is to be friends with someone who has one That friend is me. I have an Anycubic Photon D2, I just need to get it set up with a enclosure and then I'll start selling whatever to people in the thread lol
|
# ? Mar 31, 2024 18:34 |
|
Half of my friends have 3D printers which means I get "You know I could just print that" with no actual follow through all the time now, it's great
|
# ? Mar 31, 2024 18:45 |
|
smug jeebus posted:My Imperial Fists with decaled shoulder pads look way better than my Tor Garadon with a sculpted one but that might just be me Sculpted pads need you to be decently good at painting to look good - you still need to be able to paint all the details in neatly. While it's not a problem with printed pads, the plastic pads often have a degree of smearing that you'll need to compensate for if you want them to look really good. GW decals are also really good, even the regular stuff in the boxes is often more detailed and colourful than most decals you get in scale model kits.You can absolutely get printed pads looking just as good as the decals but you could also just spend 10% of the time and effort to achieve the same result with a decal.
|
# ? Mar 31, 2024 18:50 |
|
I legitimately think decaled pads look better than even good 3D printed ones. There’s something about just how high the printed icon has to be that always makes it look out of scale to me on the model.
|
# ? Mar 31, 2024 19:10 |
When I was looking around on Etsy there was some guy who was selling fifty shoulder pads for $20 which seems like they would be more cost effective than a custom decal sheet, hilariously enough. Don't you need cyanoacrylate to affix resin to plastic, though?
|
|
# ? Mar 31, 2024 19:21 |
|
Stephenls posted:I don't particularly like Microset because I find I have to do a lot of maneuvering decals around on a surface after I've placed them, and the microset interferes with that. I've had better luck with just a layer of gloss varnish and then water under the decal. It may be more useful when putting larger decals down on larger surfaces where it’s easier to get placement right the first time,, but I’m mostly putting tiny decals down on space marine pauldrons or knees or whatever where getting it centered is both very tricky and super obvious if it’s wrong. I feel like I almost have the opposite problem with Microset. Whenever I get my decal in the right place, it refuses to stay put. Sometimes when I press down with a paper towel, it will lift the decal right off lmao Maybe I'm not letting it dry enough?
|
# ? Mar 31, 2024 20:02 |
|
What is the free model for May and April?
|
# ? Mar 31, 2024 20:55 |
|
We'll know when they tell us. vv Usually they mention that at the end of each month, but the last WarCom post I can see for it is for the March model so maybe they'll mention the April one next week.
|
# ? Mar 31, 2024 20:58 |
|
Wait, I meant March. Edit: Tyranid Professor Shark fucked around with this message at 21:08 on Mar 31, 2024 |
# ? Mar 31, 2024 21:05 |
|
Aliensandwich posted:I feel like I almost have the opposite problem with Microset. Whenever I get my decal in the right place, it refuses to stay put. Sometimes when I press down with a paper towel, it will lift the decal right off lmao If there's a lot of water present the decal may not have properly adhered. To soak up the excess water the trick is to wick it away with a cotton bud or bit of paper towel/tissue twisted into a point. Just touch the edge of the wet area to suck the water up and let the decal settle onto the surface. Only then do you dab the top of the decal with a tissue/cotton bud to get rid of the last of the moisture and smooth it down. And only after all that do you brush on the MicroSOL and let it dry naturally.
|
# ? Mar 31, 2024 21:23 |
|
I would also add micro set advises doing that dabbing with a slightly damp paper towel, and once I started doing that I had waaaay more success. When it’s bone dry it’s way too ‘sticky’ and can grab that decal too easily.
|
# ? Mar 31, 2024 21:30 |
|
Finally finished painting one model after two decades. Haven't done the base but it's at least a real start.
|
# ? Mar 31, 2024 21:33 |
|
Testikles posted:Finally finished painting one model after two decades. Haven't done the base but it's at least a real start. Looks great! Those gretchin are an awesome kit, I have 14 painted up.
|
# ? Mar 31, 2024 22:10 |
|
Calling it a kit is being generous, and again the mold shows its age, but those sculpts, those sculpts have some real charm and personality.
|
# ? Mar 31, 2024 22:16 |
|
Testikles posted:Finally finished painting one model after two decades. Haven't done the base but it's at least a real start. that looks great!
|
# ? Mar 31, 2024 23:15 |
|
Professor Shark posted:Wait, I meant March. And April will be a Space Marine by the looks of it. But that's going by the silhouette on the twitter post, because it's still posting an hour early so the article link hasn't unlocked yet. Edit: Well if you want one of the new Deathwing Knight models then here's your chance: https://www.warhammer-community.com...ore-activities/ Cooked Auto fucked around with this message at 13:04 on Apr 1, 2024 |
# ? Apr 1, 2024 12:03 |
|
Have I mentioned how much space marines suck for having everyone look almost exactly the same with only tiny variations in their models and having a million different rules for each one?
|
# ? Apr 1, 2024 17:10 |
|
Not yet.
|
# ? Apr 1, 2024 17:26 |
|
Cooked Auto posted:And April will be a Space Marine by the looks of it. Might grab that since I dropped and damaged one of mine. Also I've just now read that the offer is 10 paints get the most *expensive* free, I'd assumed there had been a mistake or the staff were being generous on the sly. I'm actually happy to get paint from GW rather than a reseller, since they're closer.
|
# ? Apr 1, 2024 18:52 |
|
Any of y'all ever play on TTS? Also, any chance any of y'all would be interested in getting a little goon league going for 40k?
|
# ? Apr 2, 2024 00:44 |
|
Lostconfused posted:Have I mentioned how much space marines suck for having everyone look almost exactly the same with only tiny variations in their models and having a million different rules for each one? That's why the Desolation Squad has enormous nerf guns It looks stupid but you definitely won't confuse them
|
# ? Apr 2, 2024 00:46 |
|
Has anyone 3rd Party made replacement guns for Desoltaors? I watched a few YT games where they performed well, but I would never want to paint those models
|
# ? Apr 2, 2024 00:56 |
|
I think the Desolator models are fine, but at 200 points for 5 of them, I don't think they'll see serious play anytime soon. Indirect fire in general outside of Guard and some Eldar has become pretty non-viable.
|
# ? Apr 2, 2024 01:42 |
|
|
# ? Jun 6, 2024 08:21 |
|
So a DW Terminator is gonna be the free model of the month. Asked my kid if he wants to go grab it at the GW store early Saturday. How good of a chance do I have of snagging one if we go at open?
|
# ? Apr 2, 2024 02:14 |