|
Chris Knight posted:Won't help if it doesn't start in the morning. Hook them to some circuit that only switches on when your bike turns on.
|
# ? Oct 31, 2015 15:58 |
|
|
# ? Jun 10, 2024 16:59 |
|
Anyone have any thoughts on/preference between a kriega US20 vs. US30? z3n, someone mentioned you have both? Any thoughts on the differences/what they're each useful for?
|
# ? Nov 2, 2015 19:38 |
|
I've got a 10 and a 20. I use the 20 when I need to carry clothes or smaller groceries. You can stuff the poo poo out of it - I managed to get like 4 days of clothes and some gifts and a pair of shoes in the 10+20 combined. I really like mine. The only thing that irritates me is that they're not very stable on a sportbike passenger seat (like a small one that's inclined) no matter how tight you strap them down. It always slides forward.
|
# ? Nov 2, 2015 19:50 |
|
I've got a 20 and a 30. The 20 is a little on the small side for multi day trips to me.
|
# ? Nov 2, 2015 21:11 |
|
We have a 20 and a 30. The 20 fits best on my pillion seat (Ninja 300), and has a lot of room. The 30 fits better on my husband's bike's pillion (a G650). So, either should be fine for you. They really can be stuffed to the gills. I've gotten $50 of groceries in the 30 in the past. When we camp, I put the 20 on top of the 30 and they carry a week's worth of clothes, my hammock, and other basic stuff.
|
# ? Nov 2, 2015 21:17 |
|
builds character posted:Anyone have any thoughts on/preference between a kriega US20 vs. US30? I've got the R35 and the R30 - I haven't used the R35 since I got the R30, because waterproof is reasonably important to me. Plus the R35 is honestly bigger than I needed, despite being more comfortable thanks to the additional support from the wider front zip up section. I got a givi 47 liter tailbag though - waterproof and vastly superior to wearing a backpack, no problems while lane splitting, lockable, etc. I recommend a hard tail case over a backpack if you're doing any commuting, then you can just toss your backpack in the tailbag and off you go, when you get there the helmet can go in the tailbag. If you're just doing jacket, you can fit most jackets and a helmet in a 47 liter setup.
|
# ? Nov 2, 2015 21:47 |
|
Thanks very much for the input everyone.
|
# ? Nov 2, 2015 23:42 |
|
I was in philly this weekend and stopped by revzilla. Tried on all the helmets they had... and it still appears that the only helmets to fit my idiot head are shoei rf1200 or x12 with the fattest cheekpads available. Apparently my head has the proportions of a grey. Kinda sucks, if they ever stop making those models I'll be SOL. The new airframe pro is pretty ballin with that pharaoh paintjob though!
|
# ? Nov 3, 2015 00:33 |
|
I believe I will be replacing my Alliance Dark with an Airframe Pro in the spring.
|
# ? Nov 3, 2015 00:35 |
|
Spring is going to be an exciting time for helmets. Corsair X, X14, and new Bell helmets. The jury is still out on the increased safety of the new Bells but I have to give them props for trying to innovate whereas every other manufacturer is doing nothing but making sidegrades. Plus they are light as gently caress.
|
# ? Nov 3, 2015 03:58 |
|
-Inu- posted:Spring is going to be an exciting time for helmets. Corsair X, X14, and new Bell helmets. The jury is still out on the increased safety of the new Bells but I have to give them props for trying to innovate whereas every other manufacturer is doing nothing but making sidegrades. Plus they are light as gently caress. I heard Bell is going to bring the Flex technology to street helmets, have you heard anything about that? The 6D helmets for dirt use are awesome and I would get one for sure if I rode offroad. I'd love to see more research/technology go into helmets.
|
# ? Nov 3, 2015 04:33 |
velocross posted:I heard Bell is going to bring the Flex technology to street helmets, have you heard anything about that? The 6D helmets for dirt use are awesome and I would get one for sure if I rode offroad. I'd love to see more research/technology go into helmets. http://www.6dhelmets.com/#!ats-1--street-helmet/c56u Looks like they did. I'm sure it's not cheap but from looking at a single excel-made plot from some grad student in michigan they look safer.
|
|
# ? Nov 3, 2015 04:38 |
|
We have the Bell 2016 catalog and the most high end version of the Star is like $1,400 or something.
|
# ? Nov 3, 2015 05:13 |
Pope Mobile posted:We have the Bell 2016 catalog and the most high end version of the Star is like $1,400 or something. Got these from the Lanesplitter article about the ones due out in February: quote:The Bell Pro Star Those are the 2 with the 6DS technology.
|
|
# ? Nov 3, 2015 05:50 |
|
velocross posted:I heard Bell is going to bring the Flex technology to street helmets, have you heard anything about that? The 6D helmets for dirt use are awesome and I would get one for sure if I rode offroad. I'd love to see more research/technology go into helmets. The Star is their "entry level" street helmet and will retail for ~$500 USD. It will use a standard EPS liner. The Race Star will retail for ~$700. It uses a slightly modified version of the Flex liner found in their 6D dirt helmets. Also includes magnetic cheekpads and the FOV of the faceshield is designed for a tucked position (aka it's a trackday helmet). The Pro Star will retail for ~$1300. It has the same features as the Race Star but the shell is a specialized carbon fiber composite. I won't comment on exact weights as I don't believe they've been made public but these helmets are I-N-C-R-E-D-I-B-L-Y light.
|
# ? Nov 3, 2015 05:51 |
|
$1,300, that was it.
|
# ? Nov 3, 2015 06:38 |
|
So If I'm 5' 11" with a 28" inseam and like a 30" waist (160 lb) am I just hosed as far as finding a one piece that fits correctly? I have a disproportionately long torso so I would image that on most suits the legs would be too long and the chest would be perfect, or the opposite.
|
# ? Nov 3, 2015 07:37 |
|
Yerok posted:So If I'm 5' 11" with a 28" inseam and like a 30" waist (160 lb) am I just hosed as far as finding a one piece that fits correctly? I have a disproportionately long torso so I would image that on most suits the legs would be too long and the chest would be perfect, or the opposite.
|
# ? Nov 3, 2015 07:51 |
|
Yerok posted:So If I'm 5' 11" with a 28" inseam and like a 30" waist (160 lb) am I just hosed as far as finding a one piece that fits correctly? I have a disproportionately long torso so I would image that on most suits the legs would be too long and the chest would be perfect, or the opposite. Aerostich also makes custom suits.
|
# ? Nov 3, 2015 13:45 |
|
Yerok posted:So If I'm 5' 11" with a 28" inseam and like a 30" waist (160 lb) am I just hosed as far as finding a one piece that fits correctly? I have a disproportionately long torso so I would image that on most suits the legs would be too long and the chest would be perfect, or the opposite. Yes. Go custom. I'd recommend Helimot, but they just stopped doing custom suits. Vanson, or whatever local customization shop is available in your area - in person with the suit fitter is where you get the value, because they can see how your body is shaped, and alter the pattern accordingly. Also high 5 long torso short leg buddy.
|
# ? Nov 3, 2015 21:08 |
|
Every jacket is too short and every pair of riding pants is too long unless they're leather daddy tight.
|
# ? Nov 3, 2015 21:30 |
|
I've had good luck with Rev'It's pants -- they're short enough for me, with ~30" inseam. Also, high-five to my long-torsoed/short-legged buddies.
|
# ? Nov 5, 2015 01:18 |
|
Does anyone know of any waterproof socks or waterproof inner boot liners to compete with this?
|
# ? Nov 5, 2015 17:08 |
|
Verge posted:Does anyone know of any waterproof socks or waterproof inner boot liners to compete with this? I've never used a bootliner. I just have waterproof boots with a built-in Goretex layer. I prefer that, since they shed water, but I guess if you're wearing some boots you love that aren't waterproof this would be a good option.
|
# ? Nov 5, 2015 17:42 |
|
Lynza posted:I've never used a bootliner. I just have waterproof boots with a built-in Goretex layer. I prefer that, since they shed water, but I guess if you're wearing some boots you love that aren't waterproof this would be a good option. Any recommendations of mid-grade waterproof boots, then? Somewhere between leaky Cyclegear Bilt and actually sheds water.
|
# ? Nov 5, 2015 18:02 |
|
Fuckin' Bilt boots, man. Spent a ton on a pair for my husband and the goddamn things leak. I'm wearing TCX ones. They're more "adventure" style (so they go up the shin, which I like). I think they're the GTX Infinity ones, so probably kinda spendy, but I live in Oregon and it rains about 9 months out of the year, so I decided to have dry feet. I like TCX boots, and I have a reasonably narrowish foot. I think they do wide sizes, too. Looks like Icon's got some pretty good ones as well, but I haven't owned any Icon gear so I can't give any recommendations there. I think the key is to look for stuff with Goretex. They seem to be a bit more expensive but generally better made, too, and some of the Icon Goretex ones are sub-$200, which is pretty reasonable.
|
# ? Nov 5, 2015 20:08 |
|
Verge posted:Any recommendations of mid-grade waterproof boots, then? Somewhere between leaky Cyclegear Bilt and actually sheds water. In order to get proper lateral protection you need one of three things. 1) A hinge that connects the top of the boot to the botton and it has to connect to an area that doesn't flex (e.g. the shin - the problem with SMX+'s is that they connect to the calf). 2) An internal bootie ala Supertech R, Axial Pro Ins, Daytona Security, etc. or 3) Some kind of other internal bracing (e.g. Sidi Mag-1s which use internal carbon fiber bracing). If you can swing the price and don't have a narrow foot (they do fit a bit narrow), they are worth every single penny. After showing people the bracing of the TRQ Tours they 100% of the time never buy the other boots they were looking at, unless it doesn't fit their foot.
|
# ? Nov 5, 2015 21:00 |
|
Verge posted:Any recommendations of mid-grade waterproof boots, then? Somewhere between leaky Cyclegear Bilt and actually sheds water. If you're OK with a boot that's a little more dual sport or off-road oriented, I would call Brian at atomic moto. Super nice and incredibly helpful. http://www.atomic-moto.com/motorcycle_boots.html
|
# ? Nov 5, 2015 22:33 |
If anyone's interested, Lanesplitter has a deeper article explaining the new technologies that Bell & 6D will be debuting soon vis-a-vis new helmets. Does a decent job of explaining current testing standards along with what Bell/6D are currently doing. Also goes on to say that part of what they're trying to reduce (brain injuries) are, in & of themself, pretty difficult to test in controlled environments.
|
|
# ? Nov 5, 2015 23:34 |
|
Just realised I got a new helmet that's one size too big and a pair of gloves that are one size too big. I've worn them both out once and it's now Ebay or nothing. FML.
|
# ? Nov 6, 2015 02:11 |
|
Depending on the shell size, you could just get bigger pads for the helmet.
|
# ? Nov 6, 2015 02:16 |
|
C2C - 2.0 posted:If anyone's interested, Lanesplitter has a deeper article explaining the new technologies that Bell & 6D will be debuting soon vis-a-vis new helmets. That 6D stuff looks really cool. Hope it become the new standard very soon.
|
# ? Nov 6, 2015 02:16 |
|
M42 posted:Depending on the shell size, you could just get bigger pads for the helmet. I was thinking that, given that I want to go from XL to L I think the shell shouldn't be different. Isn't the foam a different size though? Or is it just the cheekpads/head bit?
|
# ? Nov 6, 2015 02:19 |
|
Some manufacturers use the same cheekpads for every shell size, like Shoei. Can't tell you more without knowing what helmet it is, but it'll say on its product page.
|
# ? Nov 6, 2015 02:20 |
|
M42 posted:Some manufacturers use the same cheekpads for every shell size, like Shoei. Can't tell you more without knowing what helmet it is, but it'll say on its product page. AGV k3 SV. Apparently there are 4 EPS shell sizes, so I'm guessing the two largest sizes are one of those. That means no go :/ Not a bad idea though. There seems to be no information on which sizes have what shell though, which is really annoying. Revzilla sells the liners and cheekpads in different sizes though. Barnsy fucked around with this message at 02:46 on Nov 6, 2015 |
# ? Nov 6, 2015 02:31 |
|
I'm pretty sure cheekpads aren't interchangeable with the K3 SV due to the fact that they are integrated with the neckroll. I can check tomorrow though. The K3 does only have 2 shell sizes, i.e. the literal outer shell of the helmet, which is where the cheekpads will snap in. Not to be confused with the EPS size. Regardless, I wouldn't try to fix an ill-fitting helmet with cheekpads. It's certainly possible that the helmet fits but the cheekpads are simply too small. However, most times if the cheekpads are too small then the helmet itself is too big. It has to fit snug on the crown of the head, which you can't fix with cheekpads. You can swap the center pad on some helmets, but if the EPS size is wrong, you still aren't fixing the core issue. -Inu- fucked around with this message at 03:13 on Nov 6, 2015 |
# ? Nov 6, 2015 03:11 |
|
-Inu- posted:I'm pretty sure cheekpads aren't interchangeable with the K3 SV due to the fact that they are integrated with the neckroll. I can check tomorrow though. The K3 does only have 2 shell sizes, i.e. the literal outer shell of the helmet, which is where the cheekpads will snap in. Not to be confused with the EPS size. Yeah it was a long shot anyway. Bollocks.
|
# ? Nov 6, 2015 03:12 |
|
Barnsy posted:Yeah it was a long shot anyway. Bollocks. Why don't you just call whoever you bought from and talk to them about it?
|
# ? Nov 6, 2015 04:53 |
|
I had to get a size smaller cheeckpads for my variant because Mediterranean face, but my fox v3 fits perfect. Some people are just built on a saturday and they have to mix and match.
|
# ? Nov 6, 2015 05:20 |
|
|
# ? Jun 10, 2024 16:59 |
|
Thanks guys for boot info; looks like I can't go cheap with boots then. I live in Eugene, Oregon and commute all year. At least thanks to you guys I won't waste $200 trying to be cheap. Breaking my foot is one of my greater crash fears and I'm a bit squiddly.
|
# ? Nov 6, 2015 14:54 |