|
Cheap as chips too.. Almost dropped a k on a 3d printer here in Australia just 4 months ago. Prices are dropping fast on them though, which is nice
|
# ? Jul 29, 2014 16:13 |
|
|
# ? Jun 12, 2024 13:25 |
|
Their slicer looks pretty cool at the least. There's no way the price is sustainable.
MickRaider fucked around with this message at 20:07 on Jul 29, 2014 |
# ? Jul 29, 2014 20:02 |
|
MickRaider posted:Their slicer looks pretty cool at the least. There's no way the price is sustainable. Define sustainable? That is a perfectly acceptable, possibly awesome, way to get hundreds to thousands of test devices completed for virtually no materials cost so that you can perfect your device, process, and procedures for a true commercial deployment. (Also why I always take the last batch in any kick-starter that I chip in to.) Further these do not include shipping even to the US so actual price is about $50-100 higher then listed
|
# ? Jul 29, 2014 21:34 |
|
Once the kickstarters over it'll go up $200-500 like the other insane priced kickstarter printers. I get that kickstarter is basically a beta testing people opt in on, but the prices are so deceiving. Just look at the Buccaneer.
|
# ? Jul 29, 2014 22:32 |
|
MickRaider posted:Once the kickstarters over it'll go up $200-500 like the other insane priced kickstarter printers. I get that kickstarter is basically a beta testing people opt in on, but the prices are so deceiving. Just look at the Buccaneer. And what's wrong with that? People who were willing to put up money for the development/establishment of there production line get a discount, the actual retail product is more expensive. Also, what's wrong with the Buccaneer? They had a concept and idea- we can build a printer for this price by using mass production techniques. They put together a plan, and asked people to participate in the betaing of the product. They got a lot of money to try it. They tried it, and it turned out to be far harder then they expected. They still push there three beta runs out (about a year late and counting) and they made significant changes to the design/description that, had they sold a product advertising those specifications, would have landed them in lawsuit land in the commercial world. I am still holding out hope to get mine delivered, but the timeline continues to slip, and the final product they put out will likely not be that cheap when not through the kickstarter- but without the kickstarter they would never have had the money to make all of those mistakes in the first place and learn what they learned, Kickstarter is not a way to buy products, its a way to support ideas, concepts, and development. If you just want to buy cheap products- banggood and dx do an acceptable job of delivering value- if you want to be part of the bleeding edge and have something to show for it, but don't have the time, money, skill, equipment, or whatever, to enter into the arena- kickstarter is great.
|
# ? Jul 29, 2014 23:25 |
|
Ok in another year are we going to see the price of a three d printer fall dramatically?
|
# ? Jul 30, 2014 01:32 |
|
No
|
# ? Jul 30, 2014 01:33 |
|
Well how long realistically before we see them being sold to mass markets?
|
# ? Jul 30, 2014 03:00 |
|
Is there anything particularly worrisome about that CraftBot printer? The specs seem pretty solid and it doesn't look like it would be too terrible for a first printer.
|
# ? Jul 30, 2014 05:36 |
|
Babygravy posted:Ok in another year are we going to see the price of a three d printer fall dramatically? It is and will remain analogous to personal computers, video game consoles, etc etc. Once it's out of the gate price remains roughly the same but the list of what you get for the money gets longer and better.
|
# ? Jul 30, 2014 05:53 |
|
Do not buy a Kickstarter Printer as your first 3D printer It's been discussed many times in the thread, but you get almost no support community, and that's even if they don't just run off with the money without sending you anything. When's the last time you saw a successful Indiegogo project, even? Also Flexible Funding = they have no idea what they are doing. Not to mention you'll be out a huge sum of money and it'll be months if not years before you see a product. Hell, I backed a router on Kickstarter over a year ago, with a predicted ship date of September 2013, and they're only now starting to ship the initial units. e2: Misread, it's fixed funding, but I'd still be wary of their shipping times e: Totally unrelated, but I won like 5 rolls of plastic (including Wood filament and Flexible PLA [which I haven't tried yet]) from MatterHackers, and I have to say their "Pro" ABS has given me more trouble than any other filament I've tried. Warps easy, barely sticks to itself, etc. Not to mention the spools don't even begin to fit on my printer. I miss my cheap eBay filament. Kazy fucked around with this message at 08:05 on Jul 30, 2014 |
# ? Jul 30, 2014 07:04 |
|
Linux Assassin posted:And what's wrong with that? Just getting tired of "$199 3D printer!" advertisements everywhere. I hope you get your printer, sounds like a sore subject. FYI I have a kickstarter printer. It's not that I'm anti-kickstarter printers, I'm anti-people not asking for enough money to actually cover costs and going under, see makibox. MickRaider fucked around with this message at 07:24 on Jul 30, 2014 |
# ? Jul 30, 2014 07:20 |
|
Kazy posted:Do not buy a Kickstarter Printer as your first 3D printer Totally understand your concerns, as I've been burned by some Kickstarters in the past. CraftBot seems to already have production going though, according to their photo updates on the IndieGogo page. They also aren't Flexible Funding, they're Fixed. Supposedly they are on track to ship units as early as August. I'm more curious about problems with the design or specs.
|
# ? Jul 30, 2014 07:26 |
|
I'm super interested in the CraftBot. You basically have no choice but to trust it based on the information they've shown and how they've presented it (which marketing can make a 1 man operation look like a fortune 500). It's always a risk/reward, and from the videos I think this risk has pretty good odds for the backer. I'm trying to get my company to back it as an experiment kind of. Hopefully I can persuade them.
|
# ? Jul 30, 2014 17:50 |
|
MickRaider posted:Just getting tired of "$199 3D printer!" advertisements everywhere. I hope you get your printer, sounds like a sore subject. I hope I do too. It's not the subject thats sore, its people who think that 'kickstarter == cheap store' that gets under my skin. Kickstarter, indigogo, etc are micro venture-capital games, and whenever people treat it like its banggood or whatever it drives home terrible messages. I wish my printer was not so delayed, I am happy to see some of the developments that are coming out of the investment, I hope that the lessons learned by the team are taken to heart by other teams and that the concepts and technology behind 3d printing advance as a result. If you want to play venture capatalist then Kickstarter is great, if your looking for a 'deal' on a purchase, perhaps not so much.
|
# ? Jul 31, 2014 00:42 |
|
Finally got the replacement part in for my printrbot simple metal, but I'm having a weird issue when printing. Successive layers after the first seem to grind slightly on the previous plastic layer, scrapping along the top of them. Absolutely no idea where to start troubleshooting this. edit: over extrusion possibly? where would I even start on this? w00tmonger fucked around with this message at 04:50 on Jul 31, 2014 |
# ? Jul 31, 2014 03:47 |
|
Cool I had no idea we had a 3d printer thread here. Anyone have experience with the Form 1+ printer? I am trying to decide between that and the Makerbot. My use for it will be to test out my models before I put them on my shapeways store.
|
# ? Jul 31, 2014 04:34 |
|
w00tmonger posted:Finally got the replacement part in for my printrbot simple metal, but I'm having a weird issue when printing. Successive layers after the first seem to grind slightly on the previous plastic layer, scrapping along the top of them.
|
# ? Jul 31, 2014 07:40 |
|
Amazon has rolled out a new 3d printing page. For now it's just some bobble heads and other trinkets, but this could be something interesting. How long do you suppose until you can send them a file and have them print it?
|
# ? Jul 31, 2014 14:48 |
|
keyframe posted:Cool I had no idea we had a 3d printer thread here. Get the Form1. Its capabilities much more closely represent what Shapeways is able to do, mostly due to the printing process. Plus, gently caress Makerbot.
|
# ? Jul 31, 2014 14:59 |
|
peepsalot posted:I'm not sure what you mean by "grind slightly", but if you saying there is poor adhesion between layers then it could be your hotend temp is set too low, or you are printing faster than the hotend can keep up. When a new layer extrudes it sounds like the hot end is bumping into the previous layer.
|
# ? Jul 31, 2014 16:37 |
|
w00tmonger posted:When a new layer extrudes it sounds like the hot end is bumping into the previous layer. Yes, over extrusion can cause that. To deal with over-extrusion, I would first try calibrating your filament diameter. Measure a few times with calipers, at different angles and different points along the length of the filament and average out your readings. Put that number into your slicer. Be aware that different colors, types of filament from different manufacturers may vary slightly in diameter, or may have more or less variance along their length. The other thing to check would be your extruder's steps/mm setting. One way to do this is measure say 150mm from the top of the hotend and mark the spot with a marker, then send command to extrude 100mm of filament. Then measure where your marker spot ends up. If the marker spot doesn't end up 50mm away from the top of the hotend, then adjust your extruder steps/mm in your firmware config to compensate proportionally. e: Another thing that can cause print vs hotend interference is warping of the print. This tends to manifest as corners which are higher than the rest of the print, and is more common on prints with a large footprint. Warping like this can typically be alleviated by adding more "brim" in your slicer. peepsalot fucked around with this message at 16:56 on Jul 31, 2014 |
# ? Jul 31, 2014 16:50 |
|
Will try all this when I get home. On a side note, I have a bit of a catch 22. I have the filament from the starter kit, and a spool of blue pla, but no holder to feed either of them. Is there a best way to set the spool up to print a holder, without a holder? I'm worried that its going to tangle if I leave it overnight.
|
# ? Jul 31, 2014 17:36 |
|
w00tmonger posted:Will try all this when I get home. I just made my spool holder out of PVC pipes from the hardware store.
|
# ? Jul 31, 2014 18:38 |
|
keyframe posted:Cool I had no idea we had a 3d printer thread here. Not even a debate. Get the Form1.
|
# ? Jul 31, 2014 18:59 |
|
Locus posted:I just made my spool holder out of PVC pipes from the hardware store. Is it practical to just sit a spool sideways and run from lit like that? I guess what Im getting at is I want to make one off of a pattern, but want to be able to leave it overnight without it tangling/breaking
|
# ? Jul 31, 2014 20:33 |
|
No, you definitely want the spool to unwind as you print. Laying it flat and pulling filament off will introduce twist, which can cause all sorts of issues. I'd rig up something with a stick, some tape, and books. Then print yourself a nice spool holder!
|
# ? Aug 1, 2014 00:12 |
|
insta posted:Get the Form1. Its capabilities much more closely represent what Shapeways is able to do, mostly due to the printing process. Plus, gently caress Makerbot. Is there something about makerbot I should know about? Are they a lovely company?
|
# ? Aug 1, 2014 03:51 |
|
keyframe posted:There's something about makerbot... lovely company!
|
# ? Aug 1, 2014 03:53 |
|
They're the ones that sued everyone
|
# ? Aug 1, 2014 03:56 |
|
Their latest printers are also bug ridden and crappy. Somehow their quality got worse.
|
# ? Aug 1, 2014 05:43 |
|
I just watched the replicator 2 video on their site with their douche ceo and I never wanted to punch someone so hard in my life. https://www.youtube.com/watch?v=3o6pcbhylmQ
|
# ? Aug 1, 2014 06:24 |
|
Perhaps they're bitter that wanhao has created such good copies of their printers that make a profit at half the price.
|
# ? Aug 1, 2014 08:48 |
|
keyframe posted:I just watched the replicator 2 video on their site with their douche ceo and I never wanted to punch someone so hard in my life. I really used to like Bre back when he was with Make Magazine, but now he really is just a puppet and the "face" of MakerBot for the big company that bought MakerBot a few years ago.
|
# ? Aug 1, 2014 09:41 |
|
I met Bre at an event last week: He was two entirely different people: Aloof and kind of a jerk if anyone "important" was around (IE, potential investor), but completely personable and nice outside that context. We talked shop about founding hackerspaces and "the early days" of of Make. Zuph fucked around with this message at 13:13 on Aug 1, 2014 |
# ? Aug 1, 2014 13:06 |
|
Zuph posted:I met Bre at an event last week: Where did you meet him? That place looks neat!
|
# ? Aug 1, 2014 23:51 |
|
keyframe posted:Is there something about makerbot I should know about? Are they a lovely company? I guy I know bought a 5th generation makerbot system and has had nothing but problems with it. Apparently the print head is a monolithic block that isn't designed to be opened up by users so a clogged print nozzle = a dead printer. He's had it for about two months and is on his 4th or 5th print head last I heard, and he's trying to get them to exchange it for an earlier model with a serviceable nozzle. To give makerbot some credit they did send him free replacement heads the first couple of times.
|
# ? Aug 2, 2014 00:54 |
|
So I guess this is a thing now. MakerBots in Home Depot.
|
# ? Aug 2, 2014 04:00 |
|
After looking more into Form 1 I am not so sure anymore. Printer sure looks nice but the extra costs are scary. Liter of resin costs 100+$ and you apparently have to replace the tray completely with a new one every 3-4 liters of resin which is another 90$. What are my other options?
|
# ? Aug 2, 2014 06:52 |
|
|
# ? Jun 12, 2024 13:25 |
|
codered11343 posted:Where did you meet him? That place looks neat! The grand opening for "firstBuild" (https://firstbuild.com/), GE Appliances attempt to harness the energy and ingenuity of the Maker Movement. Some of the concepts for this space came from upper level management at Appliance Park visiting our hackerspace, and collaborating to host an "Appliance Hackathon" (http://insiderlouisville.com/news/linecook-sinkwasher-take-home-gold-historic-ge-lvl1hackathon/). Most of the rest comes out of their partnership with Local Motors (https://localmotors.com/ They're 3D printing a car right now, seriously). It's an interesting idea, especially if they manage to actually engage folks without being too restrictive. Their standard contract is reasonably fair, and they've got a lot of great equipment. The folks running the place seem to have a genuine interest in playing nice with local Maker groups, so I'm happy to see where it goes, and ride the wave of positive PR.
|
# ? Aug 2, 2014 07:06 |