|
I think the civic liftback has a bit more butt behind the tires than a 3 as well, which is just straight up cargo space. The past few generations of 3 have looked like they’ve got relatively long hoods, but I don’t think that’s true compared to other midsized cars. Just an aesthetic trick.
|
# ? Apr 16, 2024 19:13 |
|
|
# ? May 2, 2024 18:57 |
|
drhankmccoyphd posted:just for a bit of context I don't really care about the scuff / scratch or the car but right now I'm gunning for a trade in and I'm trying to minimize the deductions with the least amount of effort. Is this a lease return or a car you own and are trading in on another purchase? Because if it's the latter, anything more than a quick wash is money wasted because trade-in offers are always going to be based around wholesale value, not "good vs better".
|
# ? Apr 16, 2024 19:23 |
|
IOwnCalculus posted:Is this a lease return or a car you own and are trading in on another purchase? Because if it's the latter, anything more than a quick wash is money wasted because trade-in offers are always going to be based around wholesale value, not "good vs better". Fair enough. Yeah it's a financed car I'm trying to trade in, but I swung by my local body shop in town and they charged me $25 for a touch up. I'd say it's money well spent:
|
# ? Apr 16, 2024 19:29 |
|
$25 is well worth it for that, and also tells me the previous damage was almost entirely paint transfer from whatever you hit / hit you.
|
# ? Apr 16, 2024 19:42 |
|
IOwnCalculus posted:$25 is well worth it for that, and also tells me the previous damage was almost entirely paint transfer from whatever you hit / hit you. Yup, it was from scraping a pile on in a cramped parking garage.
|
# ? Apr 16, 2024 19:49 |
|
Car veers slightly left, this is how I have to hold the wheel going straight ahead. Now I've done a lot of work on the right side front wheel, the whole hub was off, I replaced the lower ball joint and renovated the brake calipers (that on both wheels). Can the swapping of the lower ball joint cause this? I figure if so it must have affected the camber of the right wheel a little. I didn't touch the toe adjustement nor changed any joints there. Tire pressure what pretty close too (2.7 bars or so, about 39 psi).
|
# ? Apr 17, 2024 08:07 |
|
Pretty normal procedure to have an alignment done after any suspension work.
|
# ? Apr 17, 2024 10:24 |
|
Seconding; even after disconnecting & reconnecting a ball joint or other suspension, it is possible to need an alignment. After replacing any suspension component (except maybe shocks if the car doesn't have integrated struts) an alignment is required. What you are experiencing is completely normal after the work that you did.
|
# ? Apr 17, 2024 15:52 |
|
also any car can need an alignment after a few years or one savage pothole anyway
|
# ? Apr 17, 2024 18:57 |
|
What is that yellow convertible that Walter Goggins' character drives in the new Fallout series? I like how the doors slide forward into pockets in the front fenders.
|
# ? Apr 18, 2024 03:06 |
|
kid sinister posted:What is that yellow convertible that Walter Goggins' character drives in the new Fallout series? I like how the doors slide forward into pockets in the front fenders. I haven't seen the show, but that sounds like a Kaiser Darrin. Neat cars.
|
# ? Apr 18, 2024 03:49 |
|
salt the fries! posted:I haven't seen the show, but that sounds like a Kaiser Darrin. Neat cars. Wow. I think we have a winner. Thanks!
|
# ? Apr 18, 2024 04:00 |
|
PainterofCrap posted:Seconding; even after disconnecting & reconnecting a ball joint or other suspension, it is possible to need an alignment. I've been looking into how to do it myself and it seems pretty doable at home.
|
# ? Apr 18, 2024 04:28 |
|
His Divine Shadow posted:I've been looking into how to do it myself and it seems pretty doable at home. I wouldn't want to be doing that at home for the first time by myself. Shops these days mostly use a digital system that will give you a printout of all your alignment metrics also which is nice to have for peace of mind. Doing it with string is possible but not easy and I would want to have a pro show me how before doing it myself. It's a very greybeard race mechanic thing to bang out a good alignment with string.
|
# ? Apr 18, 2024 04:36 |
|
Perhaps the first time, but it's not a viable long term solution to go a shop every time I deal with the front suspension components on this car because that's gonna happen again soon by the look of some drive shaft gaiters. I feel I should be able to perhaps machine something more solid to measure between the wheels than string. I got this car with the intention of doing all the work on it myself, at one point the engine will come out for an overhaul and I plan to rebuild the gearbox then too. I might get a spare engine and gearbox first though to look over and get used to it.
|
# ? Apr 18, 2024 04:53 |
|
Get a Firestone lifetime alignment? Does that still exist?
|
# ? Apr 18, 2024 07:02 |
|
His Divine Shadow posted:Perhaps the first time, but it's not a viable long term solution to go a shop every time I deal with the front suspension components on this car because that's gonna happen again soon by the look of some drive shaft gaiters. I feel I should be able to perhaps machine something more solid to measure between the wheels than string. You may have to accept the fact that some things you probably can't do yourself. Whether you want to or not.
|
# ? Apr 18, 2024 11:31 |
|
A wheel alignment ain't it... e: We'll see if I dunning-krugered myself later. His Divine Shadow fucked around with this message at 12:08 on Apr 18, 2024 |
# ? Apr 18, 2024 11:52 |
|
wesleywillis posted:You may have to accept the fact that some things you probably can't do yourself. Whether you want to or not. So far that list includes getting myself a laser alignment machine, rebuilding an automatic transmission, rebuilding a steering rack, and rebuilding an AC compressor. I've already done all the rest, it just took 16 years of nearly pathologically self reliant car nerding to reach that point.
|
# ? Apr 18, 2024 13:52 |
|
That's good, I'm only 10 years in on the pathological self reliance nerding so far.
|
# ? Apr 18, 2024 14:03 |
|
Check out paco moto hub stands. There are fancier but $1k vs texa$. https://pacomotorsports.com/ https://i.imgur.com/p3o1jU7.jpg
|
# ? Apr 18, 2024 14:29 |
|
kastein posted:So far that list includes getting myself a laser alignment machine, rebuilding an automatic transmission, rebuilding a steering rack, and rebuilding an AC compressor. I've already done all the rest, it just took 16 years of nearly pathologically self reliant car nerding to reach that point. A couple things I've resigned myself to farm out...and it basically boils down to shop space: 1) Tire balancing. Yeah, could score some old school balancer being pitched... 2) Thing I absolutely have no desire for: Alignments. I've gotten by "batching" up all the work and dragging a vehicle in once to get it over with. I'll get what I think is close with a tape measure and everything else to get it there.
|
# ? Apr 18, 2024 15:37 |
|
I paid $300 for a fmc 7600/7700 mounting machine and $250 for an accuturn 1450 balancing machine back in 2017 and I think I've already paid for them in mounting and balancing fees alone. The reasoning wasn't so much cost as freedom, it allows me to do my tires any time I have time instead of having to make time during the business day, and allows me to hold my usual 0/0 balancing standard instead of whatever the abused flat rate tech doing the work thought was close enough, which often depends on how much they hate their boss today and how close it is to a smoke break or lunch. I can also mount burnout tires for free as much as I want which is nice because paying 20+ to have them mounted and arguing about whether they're roadworthy or not every time significantly reduces the fun involved. The mounting machine is definitely not particularly kind to the lips of fancy alloys and stuff but it works great on steelies and beater alloys which is all I have. You couldn't convince me to do other people's mounting and balancing for regular rate but if anyone local to me wants to do their own, bring tires and wheels and I'll teach you how to use my machines for like, a cheap dinner at the local Chinese buffet or something.
|
# ? Apr 18, 2024 15:57 |
|
Colostomy Bag posted:A couple things I've resigned myself to farm out...and it basically boils down to shop space: These are the two things I really wish I could do at home easily I lack the skill, tools and space
|
# ? Apr 18, 2024 15:57 |
|
Why doesn't anybody make a generic TPMS relearn tool, excepting GM vehicles?
|
# ? Apr 18, 2024 17:18 |
|
|
# ? Apr 18, 2024 18:13 |
|
Kia Soul Enthusias posted:Why doesn't anybody make a generic TPMS relearn tool, excepting GM vehicles? The Autel TS508 does a decent job.
|
# ? Apr 18, 2024 18:50 |
|
Full Collapse posted:The Autel TS508 does a decent job. For at least $250. Why is such an important tool being made by only one company for such a high price?
|
# ? Apr 18, 2024 19:48 |
|
Kia Soul Enthusias posted:For at least $250. XTOOL TP150 TPMS Relearn Tool 2024 Newest Version, Tire Pressure Light Reset, All Universal Sensors Activation/Relearn, XTOOL TS100 Sensors Programming Only The reviews appear to be good except for idiots who can't figure out how to use tools, but ya know, try it out inside the return window. At least for some brands, there's a solid argument for buying the generic tools, though - the GM one I just used was $10 and worked fine, there's a Motorcraft knockoff for Fords for $12, etc. Some manufacturers appear to have sufficiently complex systems that there aren't cheap tools readily available, and there's definitely a point where you might want to be able to cover other brands, but ... I think I'll probably just buy the Motorcraft knockoff and call it good for $22.
|
# ? Apr 18, 2024 20:29 |
|
I've got a 2017 Nissan that plays MP3 files in the order they were written to the subdirectory. It sorts directory names, but not files. I don't understand how this made it into production. In any case, I'm curious if any of you nerds have written something like a shell or Python script that will:
I'll probably be writing this damned thing, but I figured, SomethingAwful is old and full of nerds, maybe somebody's already done it.
|
# ? Apr 18, 2024 20:58 |
|
As for #3, bulk file renamers do exist.
|
# ? Apr 18, 2024 23:18 |
|
kid sinister posted:As for #3, bulk file renamers do exist. Yeah I have a bulk renamer, I want something that leaves the originals and only uses this weird scheme for a handful of albums because Nissan only shows filenames.
|
# ? Apr 19, 2024 00:18 |
|
You know, you might be better off asking in the Inspect Your Gadgets or No Music Discussion forums here.
|
# ? Apr 19, 2024 01:32 |
|
In retrospect, I think I just needed somewhere to complain about my car's stereo. Thanks for listening
|
# ? Apr 19, 2024 03:50 |
|
May be the wrong place to ask, but can anyone recommend a simple welder for doing body work? Just looking to patch some rust spots.
|
# ? Apr 21, 2024 22:07 |
|
Welding sheet metal is extremely difficult with a cheap MiG. It’s slightly more controllable with shielding gas. I bought the cheapest MiG Harbor Freight sold: dial for feed speed and two rocker switches (4-settings) for voltage. Started out practicing with no gas, then added CO2 (left-over from a kegerator) then bought a tank for 75/25 CO2/argon. I still burned through thinner areas (with hidden rust) & had to get creative with backing materials here & there. The welder was about $350; the tank was $325 off Amazon with a full load. Refills were about $75. I welded up the body on my Econoline, used about 7-lbs of wire and two tanks of mix. The steel was 20-22-gauge. If you go this route I highly recommend extensive practice first, to find the best pace as well as the settings (mine were almost always on the lowest possible). I heard frequently that TIG is the best & easiest for thinner sheet metal steel, also for aluminum. I was committed but probably would have gone TiG if I was doing it again. I also bought the cheapest self-darkening mask HF sold and it worked flawlessly. No retinal damage. PainterofCrap fucked around with this message at 22:42 on Apr 21, 2024 |
# ? Apr 21, 2024 22:39 |
|
Anybody in here ever use an Echo Bluetooth trailer brake controller? Using with a Tacoma and Scamp camper. PO threw one in with a camper I picked up last year. It hooks up and pairs with my phone just fine. In neutral, it actuates just fine either with the "button" in the app or with the brakes applied. However, as soon as I'm driving, it constantly applies what feels like about 2-3% braking power. Not enough to make it difficult to drive, but enough to slow it down a little quicker than with no brakes at all while coasting. And enough to make the brakes hot as gently caress in about 4 miles. There's a little braking meter displayed when you're going and it shows the needle just flickering into the red off zero, so it seems like the fault is definitely with the controller and not with the system on the trailer. Either that or something is happening in the factory trailer pigtail on the truck when it's in gear and in motion. As far as I can tell, the electronic brakes on the camper will only work if there's a controller in line, as it tows perfectly fine without one. I don't like the idea of a Bluetooth version anyway, so I'll probably get a wired one installed in the truck pretty soon. But I'm wondering if there's a simple fix here so I can use the trailer brakes on an upcoming trip with this thing. HenryJLittlefinger fucked around with this message at 00:07 on Apr 22, 2024 |
# ? Apr 22, 2024 00:03 |
|
Luna posted:May be the wrong place to ask, but can anyone recommend a simple welder for doing body work? Just looking to patch some rust spots. Just to add to what painterofcrap said, since there's been a complete technology shift in welder technology from transformers to inverters, there's lots of older high quality MIG machines available (at least in my local used market) and they go for cheap. Their main drawback is that they are very heavy compared to new stuff, and lack all the bells and whistles the new inverters are capable of. What you get in return if you score a nice old unit is quality construction for you money, which can very helpful. A good consistent wire feed mechanism all the way from spool to nozzle for example is important when MIG welding thin sheet metal which is indeed pretty unforgiving. Also good shielding gas, which is gonna be expensive anyway go go about procuring it.
|
# ? Apr 22, 2024 05:32 |
|
Welding rust is one of the most difficult parts of welding. A good welder with gas is minimum IMO. I weld straight CO2 these days but it's more difficult.
|
# ? Apr 22, 2024 07:48 |
|
|
# ? May 2, 2024 18:57 |
|
Would it be super tacky if i bought a new white camry, two tone it and add paint/decals/wings to make it look like ae86 trueno / Hachiroku? Without the japanese characters. How expensive is it to make a paint job additions look like its straight from factory? Also how hard is it to keep a white car clean and not look grimy/cheap? Al-Saqr fucked around with this message at 11:37 on Apr 22, 2024 |
# ? Apr 22, 2024 11:34 |