|
https://www.youtube.com/watch?v=P_E1S4vETJw Found this strange beast on craigslist over the weekend:   Some lunatic installed a ZZ4 350 crate motor and Borg Warner T56 6 speed. I think it's still on the stock suspension, so it basically handles like a land yacht.   It's really hard to drive it without laughing like an idiot the entire time (possibly fumes-related).      It came with an ugly Kenwood cd player complete with hacked up wiring harness. I grabbed an OEM head unit and bolted it in yesterday, but I haven't found replacement wiring for it yet. Gotta start stockpiling cassettes. https://www.youtube.com/watch?v=GXCh9OhDiCI The wiring under the steering column needs some work. After jiggling a bunch of connections I was able to get the dash and tail lights working again. It's always a good sign when you find boxes of fuses in the car. Hopefully I can get the digital dash apart and clean the displays out. It's nearly impossible to read during the day even with the tinting. I'd also like to get the phonograph (of course it has a phonograph) working again. Guessing it just needs to be wired back up as well. https://www.youtube.com/watch?v=6hJBko3-oV4 There's a bit of smoke coming from the oil breather, hoping it's nothing too serious. Anyone have any ideas what could cause it? https://www.youtube.com/watch?v=xQXim3jbCdk e: someone fix the palm trees 
ape fucked around with this message at 03:56 on Nov 21, 2017 |
#
¿
Nov 21, 2017 01:59
|
|
|
|
| # ¿ May 9, 2024 03:40 |
|
|
I haven't gotten all the way in there, but it doesn't look awful so far. Once the new struts for the hatch show up I can check without breaking my back. I was trying to hold out for a 240z but this was too nice to pass up. Pham Nuwen I blame you for all of this.
|
|
#
¿
Nov 21, 2017 03:23
|
|
|
Adiabatic posted:There I fixed it. ty
|
|
#
¿
Nov 21, 2017 06:06
|
|
|
Yeah, louvers are a must.. will have to track some down. I filled it up Saturday night and it's already down to half a tank. The trip meter is dead so I'm not certain, but the mpg must be approaching single digit territory.
ape fucked around with this message at 00:30 on Nov 22, 2017 |
|
#
¿
Nov 22, 2017 00:24
|
|
|
BoostCreep posted:Smoke or condensation? I know nothing about this engine, but possibly an incorrectly set up PCV system? Yeah could be the PCV, will look into it more once the manuals I ordered get here. The previous owner said he swapped the vacuum connection going to the brake booster check valve from one spot on the manifold to another, so it might be related to that. He was like 90% done replacing all the brake lines with stainless and braided hoses. Just one small one left to do on the rear passenger side. The wiring or solder joints for the fuel gauge are having issues as well, it went out last night and came back this morning. From this picture I found it looks like I should be able to clean the lenses in front of the gauges.  So far I haven't been able to find a decently priced stereo harness. Mine looks very similar to this, with the connectors cut off and spliced onto a DIN style plug: 
ape fucked around with this message at 15:29 on Nov 23, 2017 |
|
#
¿
Nov 23, 2017 14:46
|
|
|
Thanks. I actually ordered a set that looks just like that from eBay last night. I found a wiring diagram as well, so it shouldn't be too hard to get working. This is my karma for doing the same thing in my Miata a few years ago.
|
|
#
¿
Nov 24, 2017 19:45
|
|
|
Just installed a leather wrap for the disintegrating steering wheel. Feels a lot better than the loose walmart crap that was on there. They're pretty easy to install, took around an hour.   A fourth wheel cap and new struts for the hatch also came today.
|
|
#
¿
Nov 25, 2017 02:48
|
|
|
Haha, yeah. I popped the PCV out and it seems to work fine. I'm going to order a new breather to see if that has any effect on the smoking. New hatch struts are in. I also got a replacement radiator hose to replace the leaky one that it has currently. The AC seems to actually work, but I'd like to replace the automatic controller with a manual one. The fuel gauge is still touch and go. Probably going to have to resolder the board.
|
|
#
¿
Nov 26, 2017 19:17
|
|
|
Managed to get both the brake booster and PCV hooked up at the same time. Forgot to grab hose clamps.  It seems to have helped. Haven't seen any more smoke out of the breather so far. Also ordered a low-mileage digital dash. Mine has this weird etching or fogginess inside and the fuel gauge only works every few days. 
|
|
#
¿
Dec 3, 2017 02:38
|
|
|
I've been researching more about the gas smell, wondering if it's the same issue this guy ran into: https://www.youtube.com/watch?v=NH8mjYbwA30 He was able to fix it by making a new gasket. He also mentioned the PCV is responsible for pulling fumes through the filter, so that's another thing to investigate. Managed to get a flat tire already somehow  . The new digital dash should be here this weekend.
|
|
#
¿
Dec 7, 2017 01:18
|
|
|
I pinged a guy on craigslist about some l/o/u/v/e/r/s/ so we'll see what happens with that. Trying to track down a spoiler as well, but they're hard to find. Digital dash refurb is good to go. Just have to rent a steering wheel puller this weekend.  Suede dash mat ready to be covered in 16 different colors/species of hair as soon as it's in.  Next up is all the belts and rubber hoses, as nice as the screeching is while it's warming up in the morning. Cheaper than coffee. I'll probably replace the other three tires as well. They're a bit dry rotted and I don't want to have one more worn than the rest. ape fucked around with this message at 04:40 on Dec 15, 2017 |
|
#
¿
Dec 15, 2017 04:35
|
|
|
New instruments are in. I rented a steering wheel puller but wound up not using it. Guessing the wheel has been off a few times before.  I left the sensor warning light disconnected since it wasn't doing any good, anyway. Fixed the connection for engine temp after these pics.   https://www.youtube.com/watch?v=dPvhuKd3VME It's really nice being able to read the speedo for a change! I also switched the PCV and brake boost vacuum connections to see if it has any effect on the amount of boost. It could use a little more. Also finally added some hose clamps, since they weren't on there very tight.
|
|
#
¿
Dec 17, 2017 04:06
|
|
|
Finished installing the dash mat this morning.  I need to look into the throttle linkage. It likes to stick wide open when it's cold out.
|
|
#
¿
Dec 17, 2017 22:55
|
|
|
sharkytm posted:That looks dope. Haha, Thanks. Pumped the gas to help it start last week and it started at redline and scared the poo poo out of me. Combined with the squealing serpentine belts, haha. Need to figure out the correct lengths to replace them. I sprayed the linkages with some brake cleaner. I'll give the lithium grease a shot too.  Picked up some louvers. Hoping to get the radio wire harness I need from the same guy soon. Does anyone know how I can straighten out the bends? I was thinking about taking them off and sandwiching between some wood. Not sure how hard they are to get apart yet. Failing that maybe take it to a body shop to have it repaired.
|
|
#
¿
Dec 22, 2017 22:09
|
|
|
|
| # ¿ May 9, 2024 03:40 |
|
|
Yeah, I think so. Haven't done a magnet test but there's no rust.
|
|
#
¿
Dec 23, 2017 00:28
|
|