|
Spent some time recently repairing one of my favorite film cameras that broke while I was in Ecuador last year - bad enough for the camera to be unusable. (The latch for the film door had broken, a common problem on the Elan 7.) Had a replacement part 3D printed by a friend of mine, ripped out the old broken part, glued the old contacts to the new part, installed it, and reassembled the camera. It's a tight fit but it holds the door closed.
|
# ¿ Feb 11, 2024 03:08 |
|
|
# ¿ May 22, 2024 03:44 |