|
Looks like you could easily get away with 0603 components if you want to improve home solderability / repairability. But 0402 is still fine, Good Enough if you don't want to continue tweaking forever
|
#
¿
Oct 16, 2022 22:08
|
|
|
|
| # ¿ May 11, 2024 17:58 |
|
|
In 6, you can use the selection filters window in the bottom right to set it so that you can only select pads. It's still not a one click solution, but it does make it quicker to click on pad, hit E, uncheck the layer, hit enter. Also make sure you turn off paste, not mask
|
|
#
¿
Oct 20, 2022 17:55
|
|
|
Make a form out of cardboard and cast something in cement
|
|
#
¿
Feb 13, 2023 08:23
|
|
|
Doesn't Zephyr have a built in serial console? So maybe your scripting requirement is python on your laptop, sending serial commands OTA
|
|
#
¿
Mar 15, 2023 00:20
|
|
|
I would generally go with the lowest resistance path to framework. Your other list of requirements is secondary. ESP32? Use the built in ESP-IDF based on FreeRTOS, no other option. Other venders, you have the option of an RTOS or a HAL, usually from the vender. I would go with an RTOS, but that's very much user choice, it comes with a lot of complications. Nordic? I'm not 100% sure, but I thought they were pushing for Zephyr. ST integrates with FreeRTOS
|
|
#
¿
Mar 15, 2023 02:56
|
|
|
Do a striped copper pattern, just because you can. Add some flair
|
|
#
¿
May 2, 2023 01:25
|
|
|
|
| # ¿ May 11, 2024 17:58 |
|
|
I've used JR Panel before, might be worth checking out what they do
|
|
#
¿
May 2, 2023 19:23
|
|