turbobricks posted:

there is a speed governor that keeps the locker from engageing above 20mph soo all i have to do is mod that. There is a weight inside the carrier that is about 1 1/2 long and about 1 1/2 inches wide. It slings out past 20 mph and keeps the locker from activating. I busted out the grinder and decided to reduce the weight so it would swing out at a higher speed. The real trick is to keep all the particles out of the rest of the diff or it might wear out very quickly. Also I had to use a grinder with carbon disks because the weight is HARDEND Steel. I removed about 15-20 percent of it and tried to remove the weight as far away from the pivot as possiable so the removed weight would be more affective.

The result was a locker that will lock up till about 50mph