|
Problem description: NVME drives aren't detected on cold boot after I installed a Samsung 990 Pro on the M2_1 slot and switched my boot/OS drive WD Blue SN550 to M2_2 slot. Board explorer occasionally shows the M2_1 slot on boot on UEFI but M2_2 slot is never shown to have anything on it. The PC automatically enters UEFI on cold boot. If I change anything in UEFI and save, Windows boots normally. I've ended up switching between two identical A-XMP configurations for a workaround. Just exiting UEFI will not allow Windows to boot. Restarts are fine. SATA drives are detected fine on boot on the board explorer. Attempted fixes: What have you tried to do to resolve the problem? 1. Change between UEFI/CSM. 2. Check boot drive priority 3. Disable fast boot/MSI fast boot (no such option visible under boot nor OS configuration in UEFI). Windows 11 fast boot is disabled. 4. Enable and disable secure boot. 5. Update UEFI, check settings again. 6. Change between M2_1 and M2_2 slot settings to be just Auto and Gen4/Gen3 respectively as appropriate per the drives. Recent changes: Swapped the OS drive to M2_2 slot and put the new NVME drive to M2_1 slot. The M2_2 slot only supports up to PCIe 3.0x4 Operating system: Windows 11 System specs: MSI B550-A Pro Corsair CV650 Gainward 3060 Ti 5600x Kingston 3200 mhz 990 Pro 2 TB WD Blue SN550 512 gb Kingston UV500 256 GB 1 TB Western Digital Blue drive Location: What country are you in? Finland I have Googled and read the FAQ: Yes, similar problems are around but I didn't seem to find a fix. I would consider a Windows 11 clean reinstall to see if it's something to do with boot drive and partitions but life is kinda busy right now *and* I'm worried that the drives just won't show up for an install at some point of the process, lmao.
|
# ¿ Nov 25, 2023 02:10 |
|
|
# ¿ May 11, 2024 11:35 |
|
Yeah I updated it earlier and it had no effect
|
# ¿ Nov 26, 2023 03:40 |
|
So turns out updating the SN550 firmware solved the entire issue. Why I didn't update that drive's firmware first instead of the Samsung's is a mystery I wish I could read their firmware's release notes and history but I can't find it anywhere. Anyways, problem fixed, thought it was appropriate to update this.
|
# ¿ Jan 28, 2024 19:01 |