|
Yeti Fiasco posted:How much did you pay for it? That thing looks lush. $900. Not one of those insane deals you read about where someone finds a 12" jointer for $20 but a very good price for a 2004 Powermatic 66 with the extension table. It's a got a 5hp/1ph Baldor motor so it'll last forever (and is honestly more saw than I need but hey). These were around $3k-ish new. I'm renting a truck with a lift gate to move it 'cause it weighs around 600 lbs. I've got some help to unload (not enough to just pick it up tho') but I'm a little worried about getting it off the lift gate and into the garage. (and hopefully, I'll be able to move it into my newly constructed garage around late fall but the permit process in Austin is ridiculously convoluted and I'm going to be doing the majority of the construction myself on the weekend so it won't be a fast project). I'm so excited, I really figured I wouldn't be able to get a saw like this for years. ETA: Hey, anyone here have any experience moving something that heavy? Googling gets me different opinions (like appliance dollies, just walking it by the corners which seems like it might damage it). I'm thinking I may need to take off the extension so it's not so awkward but I don't want to disassemble it any further (like taking off the table). They make a mobile base for this saw I plan to get eventually but I don't have it yet. Tora! Tora! Tora! fucked around with this message at 00:42 on Mar 24, 2013 |
# ? Mar 24, 2013 00:31 |
|
|
# ? May 30, 2024 13:59 |
|
t_violet posted:$900. Not one of those insane deals you read about where someone finds a 12" jointer for $20 but a very good price for a 2004 Powermatic 66 with the extension table. It's a got a 5hp/1ph Baldor motor so it'll last forever (and is honestly more saw than I need but hey). These were around $3k-ish new. I'd say take the extension table off since that'll make it both lighter and easier to handle. Taking the table off might be a good idea if it isn't too invasive- if it's cast iron, that's going to be a large portion of the weight. You could put the table parts on a furniture dolly pretty easily. Past that the lift gate is a great idea and takes care of most of the problem. As for getting the saw on and off the lift gate and into your garage, your best bet is lots of people. Just get like 4-6 dudes and the job will take 10 minutes. Ask friends, neighbors, whoever. If that is for some reason totally impossible I'd get some of those slick plastic saucers, put them under the feet/corners, and muscle it a little at a time.
|
# ? Mar 24, 2013 01:29 |
|
Stripping it as far as possible will help and getting everything back to square isn't a big deal. Since you're moving it anyway its possible that things will get out of square and its good practice to redo it anyways. Just get a dial indicator if you don't already have one. Oh yeah and it'll be a bitch if you don't have any help loading.
|
# ? Mar 25, 2013 00:10 |
I don't know where to post this but tools in general seems close enough. Time to get organized! Gonna be legittttttt I acquired them through a couple contacts via what was effectively an estate clear-out type operation. I didn't know what to offer and the guy didn't know what to charge, but after some googling it's looking like I got an excellent deal. They're akro-mils, got the whole thing for $50. The backside is also covered in hooks as well if I decide I want to get more bins for it. I spent the entire day going through the random piles and boxes of stuff in my garage, filtering them into the bins. I think I need to find some inventory software. Bad Munki fucked around with this message at 06:07 on Mar 25, 2013 |
|
# ? Mar 25, 2013 01:27 |
|
Cross-posting from Cycle Asylum...if you have a good-sized air compressor, I highly recommend anyone in here who likes to purchase, maintain and restore old tools or machinery (that'd be everyone, I imagine) pick up a little siphon gun and a sack of blasting soda. I did today to try cleaning the oil and grease off my motorcycle engine and lookie: And it's non-toxic! And water-soluble! I'm never cleaning things the old-fashioned way again! e: oh and I guess I should also review that Makita LXT239 Impact Driver + Hammer Drill set I got a while back. Verdict: A+ would buy again. No super fancy gimmicky features, just a nice powerful drill and driver. Both are lightweight and quiet, but feel very solid. The brushless motor has a little bit more electronic/musical sound to it than a brushed motor, which is interesting. The impact driver is quite powerful, and I used it to disassemble the engine above; I only had to break out the air-powered rattle gun for five bolts in total, one on the end of the crankshaft (duh) and four that hold the entire case together (duh). Everything else the Makita zipped off in no time. If you're doing woodwork instead of engine assembly, fuhgedaboutit -- it will happily crush through 2x4s and snap the heads off cheap screws in seconds. Great tool! e2: also I haven't even had to recharge it once yet Sagebrush fucked around with this message at 07:10 on Mar 25, 2013 |
# ? Mar 25, 2013 06:41 |
|
Still looking for a table saw in my area: Is this a decent deal? http://washingtondc.craigslist.org/nva/tls/3699524048.html
|
# ? Mar 26, 2013 23:17 |
|
Daggerpants posted:Still looking for a table saw in my area: Is this a decent deal? http://washingtondc.craigslist.org/nva/tls/3699524048.html Seems high to me but I'm no expert on Craftsman saws. I believe these are the same as the Rigid saws and may have the same alignment issues. I'm always wary of new looking Rigid/Craftsman saws for that reason.
|
# ? Mar 26, 2013 23:52 |
|
Daggerpants posted:Still looking for a table saw in my area: Is this a decent deal? http://washingtondc.craigslist.org/nva/tls/3699524048.html If I were you I'd go for something like this: http://washingtondc.craigslist.org/nva/tls/3698690535.html I own a similar model from the 100 series and it's a really solid saw. Plus there's tons of parts/wings/fences for it on Ebay. If you don't mind doing a bit of cleaning on it, it's a good deal.
|
# ? Mar 27, 2013 03:45 |
|
ExplodingSims posted:If I were you I'd go for something like this: http://washingtondc.craigslist.org/nva/tls/3698690535.html I emailed with the seller and asked him to try and switch the saw on, he said the motor makes noise but the pulley doesn't turn. Am I going to have a hard time trying to find a replacement motor? I'm not really seeing a plethora of parts on ebay. Daggerpants fucked around with this message at 23:07 on Mar 27, 2013 |
# ? Mar 27, 2013 22:58 |
|
Daggerpants posted:I emailed with the seller and asked him to try and switch the saw on, he said the motor makes noise but the pulley doesn't turn. Am I going to have a hard time trying to find a replacement motor? I'm not really seeing a plethora of parts on ebay. Any motor should be fine. It's an 8" saw, a 1hp motor should be plenty. Looks like a fun little saw to own but I don't know if I'd want it for my only tablesaw unless I exclusively made small projects.
|
# ? Mar 28, 2013 03:35 |
|
There was some talk of Ridgid warranty stuff on the last page. My one handed sawsall quit working last week and I checked the motor brushes. One of them is worn down to almost nothing, while the other is plenty long. Google tells me that uneven wear is just from uneven spring tension, so there shouldn't be any issues with the saw itself. I put in a support ticket on their website and they are sending me a set of brushes for free under the lifetime warranty. Should be here in a week or so.
|
# ? Mar 28, 2013 04:04 |
|
iForge posted:There was some talk of Ridgid warranty stuff on the last page. My one handed sawsall quit working last week and I checked the motor brushes. One of them is worn down to almost nothing, while the other is plenty long. Google tells me that uneven wear is just from uneven spring tension, so there shouldn't be any issues with the saw itself. I put in a support ticket on their website and they are sending me a set of brushes for free under the lifetime warranty. Should be here in a week or so. Did you register your tool beforehand?
|
# ? Mar 28, 2013 05:13 |
|
kafkasgoldfish posted:Did you register your tool beforehand? I registered it a day or two after I bought it, but it took a solid 2 months for it to show up on my "dashboard" on their site.
|
# ? Mar 28, 2013 13:50 |
|
Stand is finished for the Craftsman lathe and motor is wired. On the first run up vibration was minimal. Edit: pics and vid http://youtu.be/VrlOC5ZaAyw wormil fucked around with this message at 04:11 on Mar 30, 2013 |
# ? Mar 29, 2013 22:07 |
|
What's the word on Jet table saws? http://washingtondc.craigslist.org/nva/tls/3723742286.html
|
# ? Apr 5, 2013 19:40 |
|
I've been looking at buying a dremel for a while, for cutting odd shaped holes in rigid plastic. I was thinking of getting their flexi shaft so I have a bit more control over the cutter for fine detail. Is a dremel actually a good tool? Does the flexible shaft really work? I read somewhere that you have to be careful about the orientation of the shaft for internal lubrication, which kind of defeats the purpose for me. I install aftermarket electronics in tractors, and I often need to cut holes in very difficult to reach, confined spaces. I also just came across proxxon tools, and they have a rotary tool similar to dremel's one. Anyone got any experience with it?
|
# ? Apr 11, 2013 14:02 |
|
JimbobDobalina posted:Is a dremel actually a good tool? My Dremel is 10 years old or so, I don't use it much but it's a well made tool.
|
# ? Apr 11, 2013 15:12 |
|
JimbobDobalina posted:I've been looking at buying a dremel for a while, for cutting odd shaped holes in rigid plastic. I was thinking of getting their flexi shaft so I have a bit more control over the cutter for fine detail. Yes Dremel makes good stuff. Proxxon looks decent too but I don't see reason to deviate from Dremel. They invented the tool and know what they're doing. The only Dremel alternative I'd consider would be the cordless M12 milwaukee (I have one of these) if you're interested in other m12 tools. But it doesn't sound like you want cordless.
|
# ? Apr 11, 2013 20:44 |
JimbobDobalina posted:I've been looking at buying a dremel for a while, for cutting odd shaped holes in rigid plastic. I was thinking of getting their flexi shaft so I have a bit more control over the cutter for fine detail. I have one with the flexi shaft, and its handled everything I have asked it to do, which admittedly isnt much, but it engraved/routed jarrah much easier than what I figured it would.
|
|
# ? Apr 12, 2013 02:28 |
|
Frogmanv2 posted:I have one with the flexi shaft, and its handled everything I have asked it to do, which admittedly isnt much, but it engraved/routed jarrah much easier than what I figured it would. Do you have to do anything special when using the flexi shaft? I'd like to be able to put the dremel tool itself on the floor and run the shaft up about 2 feet where I'll be cutting plastic. How flexible is it? Can it go round a couple of bends, and still run at full rpm?
|
# ? Apr 12, 2013 03:20 |
|
Note that McMaster carries an entire selection of rotary tools and bits. They have a massive selection of bits: http://www.mcmaster.com/#dremel-compatible-tool-bits/=mayg5z Also I see they have some more industrial-like bench tools with flexible shafts. I assume there are more of these types out there in the market if you really wanted something more robust than a dremel brand one: http://www.mcmaster.com/#catalog/119/2609/=maydyi
|
# ? Apr 13, 2013 16:14 |
|
I'm rather sad that heleta (the company I buy all my welding abrasives from) stopped carrying standard 1/4" shank carbide die grinder bits, they had some amazing prices. Everyone else I can find is literally selling for double or triple the price.
|
# ? Apr 13, 2013 17:46 |
|
The flex shaft will overheat if you coil it too tightly because it will rub on the sheathing, that's what the warnings are about. You can tell if it's doing it just by regularly running your hand along bent areas looking for hotspots. I would not expect to get better than maybe an 8"-diameter 360 from it, but empirical testing is the way to go here.
|
# ? Apr 14, 2013 15:33 |
JimbobDobalina posted:Do you have to do anything special when using the flexi shaft? I'd like to be able to put the dremel tool itself on the floor and run the shaft up about 2 feet where I'll be cutting plastic. How flexible is it? Can it go round a couple of bends, and still run at full rpm? It doesn't take all the attachments that the regular head can take, mainly because its missing the thread around the neck, so things like the plunge router tool won't work. I havent tried to coil it up like you are talking.
|
|
# ? Apr 15, 2013 03:06 |
|
I'm almost finished putting together my first at-home project, a storage bench. I realized toward the end that all the drilling and screwing I was doing could have been made a lot easier with an air powered nail gun. What I'd like is a cordless 18v 18 gauge brad nailer (I dont want to spend a lot and already have the batteries). Will brads offer me the durability and strength to make say, another bench, trunk, or a bookshelf? I've used nail guns before but I can't quite remember if they were specifically using brads or not.
|
# ? Apr 15, 2013 23:46 |
|
BoyMeetsWorld posted:Will brads offer me the durability and strength to make say, another bench, trunk, or a bookshelf? Alone? No. With glue? Yes, contingent on mechanical joinery. Basically they would be acting as clamps until the glue dries.
|
# ? Apr 16, 2013 00:06 |
|
I want a rotary tool to help make scales for straight razors. I don't however, want to spend as much as a Dremel costs. Are there any decent lower-cost options?
|
# ? Apr 16, 2013 01:36 |
I have a ryobi that has worked fine so far. Mostly just use it for cutting holes in drywall, though.
|
|
# ? Apr 16, 2013 01:55 |
|
TopherCStone posted:make scales for straight razors I had to look that up. If anyone else is wondering, "scales" in this context are the outer pieces of a straight razor's handle/case.
|
# ? Apr 16, 2013 02:06 |
|
wormil posted:Alone? No. So you'd recommend I'd use glue, brads, and also mechanical joinery (like biscuits or finger joints?)
|
# ? Apr 16, 2013 02:07 |
|
BoyMeetsWorld posted:So you'd recommend I'd use glue, brads, and also mechanical joinery (like biscuits or finger joints?) Basically yes although there are other options for joinery such as dadoes, rabbets, dovetails, etc. Norm Abram was known for his brad nail & glue joinery, at least in the early years of the show.
|
# ? Apr 16, 2013 03:22 |
|
BoyMeetsWorld posted:So you'd recommend I'd use glue, brads, and also mechanical joinery (like biscuits or finger joints?)
|
# ? Apr 16, 2013 03:33 |
|
Splizwarf posted:I had to look that up. If anyone else is wondering, "scales" in this context are the outer pieces of a straight razor's handle/case. Oh, yeah sorry. I've been reading up on the shaving forums all day so I forgot that's not a common term. Basically it's wood, micarta, acrylic, etc material about 1/8" (little over 3mm) thickness. I'd use it to bevel the edges and do sanding (especially to clean up the edges after I cut them out), maybe drilling if I can make it stay steady. TopherCStone fucked around with this message at 04:09 on Apr 16, 2013 |
# ? Apr 16, 2013 04:07 |
|
TopherCStone posted:I want a rotary tool to help make scales for straight razors. I don't however, want to spend as much as a Dremel costs. Are there any decent lower-cost options? Yes, there are. Get a Dremel off Craigslist. Hell, do you know anybody that's dying soon? I swear I've seen a Dremel at every single estate sale that I've ever been to, with tons of bits and attachments. It's a very popular tool and has been standard for so long now that every old fart guy owns one. I would imagine that you would have to wake up extra early to beat the other old farts to the sale.
|
# ? Apr 17, 2013 21:31 |
|
I have to seriously recommend the Milwaukee 18 volt Hackzall to anyone who already has Milwaukee 18v stuff/needs a loving awesome one handed cordless saw. This thing is a loving beast. I picked it up to go with my drill/driver set and finally got to put it to serious work this week. It cuts like a dream and has great battery life compared to other battery saws that I have owned/used. I love the drill-like grip on it. I've been cutting allthread and lots of 3/4 and 1 inch conduit with it and cannot be happier. It is super quiet too which is nice. It costs $100 for just the tool and somewhere between $175-$200 for the tool with battery and charger.
|
# ? Apr 18, 2013 01:12 |
|
kid sinister posted:Yes, there are. Get a Dremel off Craigslist. Hell, do you know anybody that's dying soon? I swear I've seen a Dremel at every single estate sale that I've ever been to, with tons of bits and attachments. It's a very popular tool and has been standard for so long now that every old fart guy owns one. I would imagine that you would have to wake up extra early to beat the other old farts to the sale. The only person I know who's likely to even have a dremel is my uncle, and even if he were to die tomorrow his kids would descend on his place and strip it bare of every fun power tool and car husk. I'll check craigslist though for sure!
|
# ? Apr 18, 2013 01:50 |
|
TopherCStone posted:The only person I know who's likely to even have a dremel is my uncle, and even if he were to die tomorrow his kids would descend on his place and strip it bare of every fun power tool and car husk. Definitely do that. For some reason, the typical old fart handymen that cut corners like nipping the 3rd prong off of every plug always take immaculate care of their Dremels.
|
# ? Apr 18, 2013 02:14 |
|
iForge posted:
I can second this. I've had it about 6 monthes and its gotten a ton of use. The best part is the one handed balance. I've made a few 2x4 projects and you just hold the 2x4 in one hand and the saw in the other to make the cut. No set up, saw horses or prep. The circular gets far less use because comparatively this is so easy, perhaps less precise, but so easy. As another random aside (and because im a big milwaukee fan) the cordless M18 wet/dry is another surprise. I use that thing constantly too both in the shop and around the house. So does my girlfriend. It can kill the smaller battery in about 10 minutes but it rivals a plug in for power. Vacuums are something you want to encourage yourself to use and it turns out cordless is perfect for that.
|
# ? Apr 18, 2013 04:44 |
|
TopherCStone posted:I want a rotary tool to help make scales for straight razors. I don't however, want to spend as much as a Dremel costs. Are there any decent lower-cost options? I have a black and decker that i bought expecting to get a couple uses out of, ten years ago. Only three speeds instead of the variable control and i think some of the dremels turn faster, but it takes the same size tools and works like a champ.
|
# ? Apr 18, 2013 06:28 |
|
|
# ? May 30, 2024 13:59 |
poo poo just got real, I ordered a new bandsaw.
|
|
# ? Apr 18, 2013 23:22 |