|
ACES CURE PLANES posted:More than that though, for preorder customers, Daban will throw in a free pg full armor set. So for 100bux you get an LED set, their PG Unicorn, and the web exclusive FA set, and right now, they might not be selling the FA set on its own? Might be your last chance to get it if you're interested in it. Are they going to do that final version with the green psychoframe and the triple shield thing?
|
# ? Jan 11, 2016 21:10 |
|
|
# ? May 26, 2024 16:49 |
|
Yeah the 1/100 Moebius Zero is practically 3D printer quality. I give it points for existing and giving my Strike a cool beam rifle, but it's probably the worst 3rd party kit I've ever seen.
|
# ? Jan 11, 2016 21:33 |
|
Fauxtool posted:Are they going to do that final version with the green psychoframe and the triple shield thing? I dunno yet. Right now it's just your basic FAUC and they've shown off the pink psychoframe, but apparently they're still deciding on whether or not to run with that color or offer a clear version or whatnot. At the very least, you can expect a resin version of the triple shield clip part to show up at some point, but the final battle version is a ways off if I recall so For my two cents, I'd kill for a clear psychoframe option from either Daban or Dragon Momoko. And it would kill me because it'd probably end with me making a PG Plan B.
|
# ? Jan 11, 2016 21:34 |
|
Got my MG Jesta Cannon in the mail today! Time to build my first kit in a couple months, drat you Legos...
|
# ? Jan 12, 2016 00:22 |
|
MJP posted:COMPRESSORS As far as I can tell, that compressor and tank doesn't come with the airbrush. Is there a certain airbrush you or someone else in the thread would recommend? I just picked up one of the Bandai X-Wing kits and I want to try my hand at painting before assembly. Thanks for the advice.
|
# ? Jan 12, 2016 19:51 |
|
An Iwata Eclipse is usually on sale on Amazon.
|
# ? Jan 12, 2016 20:42 |
|
I haven't finished it yet, but I've been working on my MG V2, and if anyone was wondering, there are features which are obviously there for the assault and buster packs. Hopefully means they'll unveil those soon
|
# ? Jan 13, 2016 02:40 |
|
Droyer posted:I haven't finished it yet, but I've been working on my MG V2, and if anyone was wondering, there are features which are obviously there for the assault and buster packs. Hopefully means they'll unveil those soon You mean they'll be unveiled as P-Bandai kits, and they'll be separate so you'll have to buy a Buster V2 and an Assault V2.
|
# ? Jan 13, 2016 02:52 |
|
You really need to calm down about P-Bandai already.
|
# ? Jan 13, 2016 04:15 |
|
BlitzBlast posted:You really need to calm down about P-Bandai already. Probably, but you know I'm probably right.
|
# ? Jan 13, 2016 07:07 |
Jolo posted:As far as I can tell, that compressor and tank doesn't come with the airbrush. Is there a certain airbrush you or someone else in the thread would recommend? I just picked up one of the Bandai X-Wing kits and I want to try my hand at painting before assembly. Thanks for the advice. I've used a Paasche Talon for some time now and been extremely happy. It will require an adapter, but those are super cheap. It is also about $50 cheaper than the Iwata and has a needle stop, which the Iwata does not have, as far as I can tell. Talon: http://www.amazon.com/Paasche-TG-2L-Airbrush-Accessories/dp/B0017IFL4E/ref=sr_1_2?ie=UTF8&qid=1452711540&sr=8-2&keywords=paasche+talon Adapters: http://www.amazon.com/MASTER-Brand-...sh+hose+adapter
|
|
# ? Jan 13, 2016 20:00 |
|
Airbrush chat: http://www.webairbrushes.com/ is having a pretty great sale right now. The coupon code is INVRED16 and it seems to be 50% and sometimes much more on the majority of their inventory. It seems like they are liquidating their inventory because some of the prices are too good. You can get a badger compressor and nice aribrush for $200 Paints including the Minitaire line are 50% off as well
|
# ? Jan 14, 2016 21:19 |
|
Thanks for the tip. No kidding, those prices are insane.
|
# ? Jan 15, 2016 06:12 |
|
I finished my MG V2 (more or less)! Might upload pictures soon
|
# ? Jan 15, 2016 22:49 |
|
How's the beam rifle? I've heard the MG V2 has a really unstable grip.
|
# ? Jan 15, 2016 23:18 |
|
BlitzBlast posted:How's the beam rifle? I've heard the MG V2 has a really unstable grip. It sorta does, yeah. It can hold the rifle just fine, but it isn't pegged into anythting so it's just kinda resting in the hand
|
# ? Jan 15, 2016 23:22 |
|
Droyer posted:It sorta does, yeah. It can hold the rifle just fine, but it isn't pegged into anythting so it's just kinda resting in the hand wow that's the like the first mg in years that didn't have some sort of peg to hold the weapons.
|
# ? Jan 15, 2016 23:27 |
|
Does anyone have any good proxy services to use that will get the limited stuff like at comiket and wonfes? There are a couple items I want from this upcoming wonfes. I used yokatta shopping before and they were great but their site is now full of dead links so im not sure it works anymore,
|
# ? Jan 16, 2016 00:55 |
|
I bought the 1/100 Barbatos today, and I am curious to see how it turns out. The stickers look cheap, but it looks like it will be easy enough to paint those details.
|
# ? Jan 16, 2016 04:31 |
|
Monaghan posted:wow that's the like the first mg in years that didn't have some sort of peg to hold the weapons. It's (unsurprisingly) based off the MG Victory, which instead of a peg had this little nub on its index finger that was supposed to hold its beam rifle in place. I think it worked for Victory due to the design of its beam rifle, but not for V2 for the same reason. Or maybe Victory can't really keep a good grip on its rifle either, I dunno.
|
# ? Jan 16, 2016 05:49 |
|
ACES CURE PLANES posted:More than that though, for preorder customers, Daban will throw in a free pg full armor set. So for 100bux you get an LED set, their PG Unicorn, and the web exclusive FA set, and right now, they might not be selling the FA set on its own? Might be your last chance to get it if you're interested in it. Gundamcentral doesn't have it yet or I'm missing something.
|
# ? Jan 16, 2016 16:20 |
|
BlitzBlast posted:It's (unsurprisingly) based off the MG Victory, which instead of a peg had this little nub on its index finger that was supposed to hold its beam rifle in place. I think it worked for Victory due to the design of its beam rifle, but not for V2 for the same reason. I tested it out a bit and the V2 holds its rifle surprisingly well, considering.
|
# ? Jan 16, 2016 16:24 |
|
Zedd posted:So where can this be preordered? That is a great deal just for the FA parts alone. Sorry, I got to the info late, I thought SamuelDecal said it was if you preordered before May 1st but I forgot he uses DD/MM formatting, so the cutoff was January 5th.
|
# ? Jan 16, 2016 16:29 |
|
ACES CURE PLANES posted:Sorry, I got to the info late, I thought SamuelDecal said it was if you preordered before May 1st but I forgot he uses DD/MM formatting, so the cutoff was January 5th. Oh well, now I can wait for the quality reports and I don't doubt the FA set will come on the market separately.
|
# ? Jan 16, 2016 16:33 |
|
It is me or do the joints of the RG 00 Raiser get a bit more loose over time, even if you're not repeatedly re-posing it? I started fiddling with it last night to finally put the decals on the GN Drives and re-pose it for a new look and everything moved more smoothly than I remember but also at the same time it became a hell of a lot more fidgety, particularly the hip and knee joints
|
# ? Jan 17, 2016 21:11 |
|
Lanz posted:It is me or do the joints of the RG 00 Raiser get a bit more loose over time, even if you're not repeatedly re-posing it? is the weather colder?
|
# ? Jan 17, 2016 22:55 |
|
Finished building the Gyan. After building the Deathscythe Hell and Turn X, the Gyan was a much quicker and easier build. I don't get the hate with Gyan. Sure it looks goofy as hell in the wrong pose, but it can look really cool in the right pose. Only reason why the sword isn't lit is because I didn't set up the LED in the sword correctly. Now I can't fix it cause the screw is stripped. That and the waist armour not being connected to anything are my only real negatives with this kit. I recommend it, especially if it's your first MG. It's pretty cheap. I'm going to build the MG Fenice Rinascita, which I'm really looking forward to. It's going to take awhile cause I have to move some stuff around to make room. I just want to confirm that the MG Sinanju OVA is a good kit. It's has good reviews, but there's a lot of conflicting reports about it not being able to hold it's weapons and the wrists being really loose. Mad Lupine fucked around with this message at 23:24 on Jan 17, 2016 |
# ? Jan 17, 2016 23:15 |
|
It can hold them, but it has really heavy weapons and rounded armor that makes posing them a little awkward. Main thing to worry about is the waist joint, though.
|
# ? Jan 17, 2016 23:23 |
|
BlitzBlast posted:It can hold them, but it has really heavy weapons and rounded armor that makes posing them a little awkward. Do you mean in terms of posing or durability?
|
# ? Jan 17, 2016 23:48 |
|
Fauxtool posted:is the weather colder? yep Never really noticed that on other kits though
|
# ? Jan 18, 2016 03:06 |
|
Fauxtool posted:Airbrush chat: http://www.webairbrushes.com/ is having a pretty great sale right now. The coupon code is INVRED16 and it seems to be 50% and sometimes much more on the majority of their inventory. They have clarified the terms of their sale. It was an inventory reduction sale, minimum 42% discount going until the 31st. As always cross check prices with amazon first. I have used these guys alot and they are great.
|
# ? Jan 18, 2016 21:32 |
|
http://schizophonic9.com/re3/volks_testarossa.html schizophonic finished his build of one of my favorite robots
|
# ? Jan 19, 2016 04:02 |
|
You guys weren't joking. the RG 00R is a fantastic kit. I usually build things a little out of order, and the Raiser itself is really sharp, both aesthetically and literally. There are a few points on this thing that are just great for a kit this size. Any word on if Bandai is going to expand the Advanced MS Joint frame system to other lines?
|
# ? Jan 19, 2016 07:14 |
|
Hi Resolution Model is pretty much RG in 1/100 form. Though considering the price of HR Barbatos, it's probably not going to do too well!
|
# ? Jan 19, 2016 08:44 |
|
Part 1 http://imgur.com/a/b4Rvl Part 2 http://imgur.com/a/t9LZE Finished the Genoace II. I learned a couple of more things about tamiya paint. Upon test fitting, the backpack pegs snapped right off. This was a good opportunity to reattach them using metal pipe and sanding The lower torso hole tended to swallow the upper torso polycap, so I added a piece of sprue inside to act as a limiter You can see that every part of this kit was made for a snug fit, for painting purposes, tremendous amounts of sanding and adjusting would have to be made I extended the neck piece a bit, poly cement does not weld polycap rubber so I smeared CA glue all over On the right an unsanded leg piece, on the left a more open joint using the plastic-eater file Making coral red was kinda fun I used clear gloss and clear flat hobby aqueous because I thought it would give a better result than using alclad aquagloss. Gloss coat for paneling, then flat for finishing. Before I start my next figure, I would just like to know if there's a goddamn way to stop paint from rubbing off onto other pieces I clearly am missing a step here, seeing as I wait for paint to cure, not just dry, then adding another coat over. The clear coats smudge off when contacted with other parts creating some white streaks. Also for some weird reason the DODS rifle, which was coeated too, rubbed onto the arm. Am I not waiting long enough for complete curing? e: imgur sucks rear end Ka0 fucked around with this message at 02:56 on Jan 20, 2016 |
# ? Jan 19, 2016 17:15 |
|
My Z'gok is still on a slow boat from Japan, but I got my Build Fighters Gouf in today! I haven't done the rest of the accessories yet, but this guy looks great. My only issue: Floppy Leg. One of the pegs is incredibly loose and I'm not sure what to do about it. I've tried to tacky it up by sticking on and removing tape from the peg and that's helped a little, but not quite enough. Any suggestions?
|
# ? Jan 21, 2016 05:52 |
|
floor polish. dip the peg in, let it dry, test it, repeat if necessary
|
# ? Jan 21, 2016 05:53 |
|
I know there's the dalong picture available, but the best I can estimate for the size of the Base Jabber is about 9 inches long by 5 inches wide. Can anyone with the model handy let me know if I'm in the right ballpark?
|
# ? Jan 21, 2016 06:10 |
|
Ka0 posted:Am I not waiting long enough for complete curing? Possibly! Tamiya needs at least two days of curing time to be safe. I doubt that's your problem as much as the simple fact that acrylics are just... really flimsy. There is a very good reason people recommend you prime.
|
# ? Jan 21, 2016 08:11 |
|
|
# ? May 26, 2024 16:49 |
|
I've finished painting my Graze, and I finally broke through a hurdle in my painting technique and as a result my second batch of parts looks vastly superior to the rest. The problem is that now most of the body that was in the first batch looks like garbage by comparison. At least my next project will look nice.
|
# ? Jan 21, 2016 09:20 |