|
~Coxy posted:The manufacturer limited warranty on batteries is practically worthless, I believe. Though I haven't used it personally, I've heard pretty good things about tool/battery warranty for Milwaukee and Dewalt specifically. Like any return issue, the process is helped along immensely if you can pull up an original receipt to prove the age of the item. I like Home Depot's auto-emailed receipt (and of course Amazon/online) where I can squirrel it away in Gmail and pull it up later if there's an issue. As for my Craftsman tools with 'lifetime' warranty, welp...
|
# ? Apr 22, 2018 00:21 |
|
|
# ? May 30, 2024 11:53 |
|
Platystemon posted:I got a card in the box with a product laying out the same fraud. Unless you work for a major news organization, good luck getting past Amazon's level1 guys, who will just offer you a free month of prime.
|
# ? Apr 22, 2018 03:25 |
|
devicenull posted:Unless you work for a major news organization, good luck getting past Amazon's level1 guys, who will just offer you a free month of prime. Email Jeff Bezos at jeff@amazon.com He won't reply, but there's a good chance he'll read it, and forward to an exec with just "?".
|
# ? Apr 22, 2018 03:29 |
|
devicenull posted:Unless you work for a major news organization, good luck getting past Amazon's level1 guys, who will just offer you a free month of prime. The response I got from fraudsupport-cs@amazon.com was the following: quote:Hello [redacted],
|
# ? Apr 22, 2018 03:35 |
|
If you hated money what brand of chisels would you buy? Would you go with different brands for different types?
|
# ? Apr 22, 2018 17:05 |
|
bobua posted:If you hated money what brand of chisels would you buy? Would you go with different brands for different types? https://www.lie-nielsen.com/nodes/4080/chisels
|
# ? Apr 22, 2018 18:06 |
|
bobua posted:If you hated money what brand of chisels would you buy? Would you go with different brands for different types? Lie Nielsen, Veritas, Ashley Isles, there are a lot of good, expensive options out there. Though if I really hated money I would get a set from blue spruce: https://bluesprucetoolworks.com/collections/chisels Though for mortise chisels I’ve heard the Ashley Isles ‘pig sticker’ chisels are excellent. I think Tools For Working Wood carry’s them. Spring Heeled Jack fucked around with this message at 00:43 on Apr 23, 2018 |
# ? Apr 23, 2018 00:41 |
|
I need Wheelbarrow or wagon. Are there any quality brands I should shop around for?
|
# ? Apr 23, 2018 02:22 |
|
TheDK posted:I need Wheelbarrow or wagon. Are there any quality brands I should shop around for? Buy a 2-wheel wheelbarrow, then put solid tires on it and take care of the handles if possible. We got a Truper 2-wheel with an 8 cuft poly bucket, and it's been great. The tires dry-rotted, and the handles rusted out, so I replaced them with solid tires and wooden handles. Well worth the expense, IMHO. I've never had a landscape wagon that worked well.
|
# ? Apr 23, 2018 03:13 |
|
I like this one, cheap enough that if you destroy it (I haven’t yet) you can just buy another. Way nicer to use than a wheelbarrow, and hooks to a tractor if you want to go that route. https://www.homedepot.com/p/Gorilla-Carts-1-200-lb-Heavy-Duty-Poly-Dump-Cart-GOR6PS/206762395
|
# ? Apr 23, 2018 04:30 |
|
I lost it in a divorce, but my favorite was a big rear end Jackson contractor wheelbarrow. I really like steel over poly because I abuse the hell out of barrows (throwing logs, stones etc) and don't mind the extra weight/cost. Solid tires are a must.
|
# ? Apr 23, 2018 04:59 |
|
uwaeve posted:I like this one, cheap enough that if you destroy it (I haven’t yet) you can just buy another. Way nicer to use than a wheelbarrow, and hooks to a tractor if you want to go that route. That looks terrible to use if you have to navigate any steps. Great otherwise.
|
# ? Apr 23, 2018 09:56 |
|
I bought some cheap toolboxes on a bored whim, and apparently they had a poo poo on of spanners in them. Turns out most of it is east German DDR stuff. A few Belzer, most WRF Radebeul. I managed to find some info, but not much. Anyone know anything? They certainly feel different from the cheap stuff found in stores today, so I guess they are either more poo poo, or decent? I'm far from an expert in tools.
|
# ? Apr 23, 2018 12:56 |
|
stealie72 posted:I lost it in a divorce, but my favorite was a big rear end Jackson contractor wheelbarrow. I really like steel over poly because I abuse the hell out of barrows (throwing logs, stones etc) and don't mind the extra weight/cost. Solid tires are a must. Yeah, I'm leaning towards a metal bin over poly. Thanks for the input everyone!
|
# ? Apr 23, 2018 15:00 |
|
I recently bought a Dewalt 10” contractor table saw and I’ve seen remarks that the OEM blades shipped with them are low quality. How do they compare to the DeWalt brand blades sold retail? My local hardware store is selling DeWalt brand 10” 60T blades for $15 and I was thinking of picking a few up for the future.
|
# ? Apr 23, 2018 15:32 |
|
I've read the last few pages of the thread, didn't see anything major, but anything terribly wrong with the Ryobi stuff at HD? I'm Joe Homeowner that needs a drill a couple times a year, and a 1/4" driver maybe monthly. If it's crap I'll step up to the Rigid tools with their LSA. My stepfather contractor swears by Milwaukee and I love his M12 and M18 powered tools, but probably overkill for the guy that needs a drill 3 times a year for 10 minutes at a time. Not terribly interested in the Ryobi ecosystem at this point, so it's not a selling point either way. Some of the Ryobi stuff is less expensive than Harbor Freight's tools right now. I'm at the point in my life where I'll spend a bit more for quality instead of throwing out lovely tools every couple of years, but don't want to overspend either. Basically I'm thinking something along the lines of (though I don't need the saw the combo is less expensive with it) https://www.homedepot.com/p/Ryobi-1..._-302859913-_-N or stepping up to this https://www.homedepot.com/p/RIDGID-..._-205762719-_-N Part of me thinks I don't need the 2 separate tools and should just splurge on this instead https://www.homedepot.com/p/Milwauk...-22CT/204322452 edit: PS is there Grill chat anywhere? Need a new grill wondering if I should just get a Weber and be done with it. skipdogg fucked around with this message at 18:21 on Apr 26, 2018 |
# ? Apr 26, 2018 18:05 |
|
I've got Ryobi stuff and while I understand it's not the most powerful, I've found it super convenient. I have the drill, circular sander, weed whacker and blower. The blower is really weak and the only one I'm not pleased with but the others are great. Disclaimer I don't do a lot of DIY stuff. Interested to hear what others think too because I was planning on getting a reciprocating saw this weekend.
|
# ? Apr 26, 2018 18:19 |
|
I have a Bosch 18v drill and driver and part of me wishes I bought into a bigger ecosystem like Ryobi.
|
# ? Apr 26, 2018 18:25 |
|
I just wanted to chime in with a trip report on a Makita XCU30PT1 electric chainsaw. This is my first chainsaw, and note that I've got hearing difficulties (relatively amazing hearing, but with constant extremely high pitched tinnitus) so the volume level of these devices was a very important feature for me. As you'd expect, the battery life is limited. I was able to delimb and section a ~40' pine in one charge of 2 batteries (saw uses 2 at a time), and I was able to just about delimb and section a larger tree (60-70', about 1.5' thick at the base) on a charge of both sets of batteries that came with the saw kit. So, if you need to be out there for hours, you'd spend a ton on batteries and dealing with charging them and it would not be worth it. On the other hand, if you only need to run a saw for 30-60 minutes at a go, then this seems totally fine. I don't have much experience with chainsaws so I can't speak to the power level comparison, but I have been a bit surprised at how torquey and powerful this saw is; getting through 1.5' sections of stump was no big deal at all. So far I've mostly been hacking up pine and other softwoods, I can post an update when I get to some of the harder stuff. Anyway, as someone who worries about their ears with powertools, this one doesn't scare me, and I think a normal person might just use this with no ear protection and not really notice the noise at all. As someone who has ~10 acres that they are trying to do as much self-maintenance on as possible, I think this is going to cover about 75% of my chainsaw needs. I expect to get a gas saw of some kind to augment it later in the season, but that's a low priority. Cross-compatibility with the rest of Makita's tools was of use to me because I am a long time Makita user and expect to get a recip saw and a few other things on the same platform this year. One ding against it, as others have noted: the power button will turn itself off after 4 seconds, as a safety feature since you can't hear the saw running. I don't find this that big a deal because my thumbs are not very thick so I don't have trouble operating the button with gloves on, but I understand why some people find it tempting to just keep fluttering one of the triggers to keep the saw on while idle, and that definitely seems like A Dangerous Idea. Final note, this thing will absolutely take your leg off with ease, and all normal chainsaw caution should be applied, lightweight and electric or not. Cabbages and VHS fucked around with this message at 18:41 on Apr 26, 2018 |
# ? Apr 26, 2018 18:34 |
|
skipdogg posted:I've read the last few pages of the thread, didn't see anything major, but anything terribly wrong with the Ryobi stuff at HD? I'm Joe Homeowner that needs a drill a couple times a year, and a 1/4" driver maybe monthly. If it's crap I'll step up to the Rigid tools with their LSA. My stepfather contractor swears by Milwaukee and I love his M12 and M18 powered tools, but probably overkill for the guy that needs a drill 3 times a year for 10 minutes at a time. Not terribly interested in the Ryobi ecosystem at this point, so it's not a selling point either way. Some of the Ryobi stuff is less expensive than Harbor Freight's tools right now. I'm at the point in my life where I'll spend a bit more for quality instead of throwing out lovely tools every couple of years, but don't want to overspend either. Read page 190. Ryobi stuff is great for the average home owner. For the price, its hard to beat their performance. Home depot also runs a lot of deals and special buys where you can get a tool with a battery for less than the regular price of just the tool by itself. With Dewalt/Milwaukee/Makita/Bosch etc you will likely spend nearly twice the price per tool and they rarely come with batteries. I don't have any personal experience with Rigid but most non-contractor grade tools have very similar features and build quality. My only complaint about Ryobi is that I wish they would make a heavier duty impact wrench (400-500 ft/lbs) but the newer 3 speed 300 ft/lb is an improvement over the last one and it suits my needs for everything but seriously stuck auto fasteners. My drill, driver, saw, etc have all been fantastic for the past few years and I've never had a problem.
|
# ? Apr 26, 2018 18:50 |
|
TheDK posted:I've got Ryobi stuff and while I understand it's not the most powerful, I've found it super convenient. I have the drill, circular sander, weed whacker and blower. The blower is really weak and the only one I'm not pleased with but the others are great. Ryobi is totally chill and fine if you’re doing occasional stuff, and assuming they honor their commitment to never changing their battery standard you should just be able to incrementally buy and upgrade things like forever TheManWithNoName posted:I have a Bosch 18v drill and driver and part of me wishes I bought into a bigger ecosystem like Ryobi. I have a Bosch 18v drill that goes with all my Ryobi tools and god it’s so much loving nicer and it’s the tool I use the most so it’s nice to have a nicer piece of equipment but yeah bro g in a big ecosystem and being able to just swap out my batteries all over the place is great But gently caress me if I’ll ever touch my Ryobi drills if the Bosch has any charge left in it Though I do use a Ryobi impact
|
# ? Apr 26, 2018 18:52 |
|
skipdogg posted:edit: PS is there Grill chat anywhere? Need a new grill wondering if I should just get a Weber and be done with it. Just bought a Weber spirit 2 310 after reading this.
|
# ? Apr 26, 2018 19:18 |
|
skipdogg posted:edit: PS is there Grill chat anywhere? Need a new grill wondering if I should just get a Weber and be done with it. Not perfect, but maybe the smoker thread would be helpful. https://forums.somethingawful.com/showthread.php?threadid=3460953
|
# ? Apr 26, 2018 19:48 |
|
Just as a reminder for those looking to buy some cordless tools: Father's day is only about a month and a half away, and those drill/driver combos are usually on decent sale around that time.
|
# ? Apr 27, 2018 01:01 |
|
Good idea, I’m in no rush so I’ll hold off. Good call
|
# ? Apr 27, 2018 02:04 |
|
I believe I want to sell my Makita 18v gear, I want to switch to Milwaukee so I can use just one charger for 18 and 12 volt. The kit I have is a hammer drill, 1/4" impact driver, sawzall, flashlight, two 3ah batteries, a charger and a bag. Would anyone in here be interested, or what would be a reasonable asking price in SA Mart? I tried going to a couple pawn shops, first one offered $55, second offered $100. I coukd futz around with getting shanked on Craigslist, or I can even try a local place called edrop which claims they will list it on eBay, Craigslist and other sites to try to get the best price. Really, I would like day prefer to see the tools go to
|
# ? Apr 27, 2018 03:16 |
|
skipdogg posted:
I’ve got a Weber Baby Q in some flavour. It is the tits. I’m usually cooking for 2-4 people and it’s more than adequate for that, if you think you need more room there are larger Q series. A 4.5kg has bottle lasts me at least 6 months of 1-2 time’s a week usage. I really can’t recommend it enough.
|
# ? Apr 27, 2018 03:49 |
|
Tim Raines IRL posted:I just wanted to chime in with a trip report on a Makita XCU30PT1 electric chainsaw. Thanks for the writeup! Thats pretty much exactly what I thought the battery life would be, I'm glad its working out for you. Sounds like a great little saw as long as you aren't doing anything serious. You're making me want one as a backup for small poo poo Crotch Fruit posted:I believe I want to sell my Makita 18v gear, I want to switch to Milwaukee so I can use just one charger for 18 and 12 volt. The kit I have is a hammer drill, 1/4" impact driver, sawzall, flashlight, two 3ah batteries, a charger and a bag. Would anyone in here be interested, or what would be a reasonable asking price in SA Mart? I tried going to a couple pawn shops, first one offered $55, second offered $100. I coukd futz around with getting shanked on Craigslist, or I can even try a local place called edrop which claims they will list it on eBay, Craigslist and other sites to try to get the best price. Really, I would like day prefer to see the tools go to Would you be willing to sell some of it or are you trying to sell it as a package
|
# ? Apr 27, 2018 04:32 |
|
I might sell the sawzall and flashlight separate as bare tools because I feel like trying to sell the drill and impact as bare tools would be difficult. . . Really it would just depend on what piece your interested and if I can get rid of the leftovers, I never asked either of the pawn shops if they would buy just the tool but I would guess that would significantly reduce their offer.
|
# ? Apr 27, 2018 10:11 |
|
Crotch Fruit posted:I might sell the sawzall and flashlight separate as bare tools because I feel like trying to sell the drill and impact as bare tools would be difficult. . . Really it would just depend on what piece your interested and if I can get rid of the leftovers, I never asked either of the pawn shops if they would buy just the tool but I would guess that would significantly reduce their offer. How old? The batteries are worth the most if they're newer, but much less if they're 3+ years old. Brushless tools? LED flashlight? Teal or black charger? If it's the same vintage as my original Makita stuff (7 years old), I'd say $150 is about the best you'll do as a package. Split it up, you might get $200. eBay examples: https://www.ebay.com/itm/Makita-18V-Lithium-Ion-Cordless-Combo-Kit-XPHO1-XDT04-XRJ04/292400475503 https://www.ebay.com/itm/Makita-18-V-Li-ion-Cordless-4-Tool-Combo-Kit-w-Battery-Hammerdrill-Sawzall/382439844244 https://www.ebay.com/itm/Makita-Drill-Driver-Reciprocating-Saw-Circular-Saw-Combo-Kit-/232735414601
|
# ? Apr 27, 2018 12:26 |
|
I honestly don't know the age, what I can tell you is my Dad originally purchased the gear, he is NOT a DIYer by any means, they sat in a storage unit for ??? years, most likely at least a year. He was cleaning out the storage unit, I said "can I have your Makita poo poo?" thinking he would say no and he said "sure". So although the batteries are probably older, I'm certain they have not had many cycles on them. The
|
# ? Apr 27, 2018 13:33 |
|
imo if you've got good, working tools just keep using them till the batteries are done. the desire to only use one charger for your batteries shouldnt drive you to sell off perfectly good tools and buy new ones
|
# ? Apr 27, 2018 14:58 |
|
Tim Raines IRL posted:I just wanted to chime in with a trip report on a Makita XCU30PT1 electric chainsaw. So I have the Milwaukee 18v Circular Saw and the thing I have noticed is that it will run the batteries down fairly quickly; HOWEVER, the Li batteries charge pretty quickly as well, meaning that even under heavy use I have effectively constant operation if I just swap them in to/out of the charger when one runs down. I expect the Makita charger is similarly quick. This isn't going to help you if you're out somewhere clearing stuff, but it's worth keeping in mind if you're around a power source.
|
# ? Apr 27, 2018 17:26 |
|
BraveUlysses posted:imo if you've got good, working tools just keep using them till the batteries are done.
|
# ? Apr 27, 2018 17:58 |
|
Crotch Fruit posted:if I want to buy more 18v tools, like a circular saw, I would really prefer to buy Milwaukee instead of Makita. out of curiosity, why?
|
# ? Apr 27, 2018 19:57 |
|
Tim Raines IRL posted:out of curiosity, why?
|
# ? Apr 27, 2018 21:54 |
|
As lame as it might sound, color was also one of the reasons I went with Milwaukee. I've always hated teal colors
|
# ? Apr 27, 2018 22:01 |
|
I'm pretty much 100% makita but when I was 8 and my dad was building a shed he had one nice power tool and it was a makita corded drill and my grandpa mentioned something about how solid makita was and I think that was my power tool version of my first playboy type thing. My preferences will forever be based on November of 93's centerfold's breasts.
|
# ? Apr 28, 2018 00:08 |
|
Crotch Fruit posted:I like the idea of the Bluetooth link to set clutch and RPM looks pretty cool, I'm not sure Mkaita has this. Bluetooth controlled drill is a thing? WTF? Why would you want that?
|
# ? Apr 28, 2018 01:06 |
|
|
# ? May 30, 2024 11:53 |
So it can tweet that you just switched to a 13/64" HSS on speed 3, on your behalf. Otherwise you gotta do that yourself and that's basically all my shop time these days right there.
|
|
# ? Apr 28, 2018 01:08 |