|
Mine runs straight up and was nearly completely clogged with lint when we moved in. The next dryer will be a ventless heat pump dryer.
|
# ? Sep 20, 2021 20:02 |
|
|
# ? May 30, 2024 09:04 |
|
IOwnCalculus posted:Mine runs straight up and was nearly completely clogged with lint when we moved in. I have one of these. It does warm up the laundry room a lot. And humidify. ... oh poo poo, I have a condenser dryer! drat it! I thought we'd bought a heat pump, and never stopped to consider WHERE THE HEAT WAS COMING FROM! Well, drat. On the bright side, I guess, it helps heat the kitchen during the winter. drat it!
|
# ? Sep 20, 2021 22:55 |
|
cruft posted:I have one of these. It does warm up the laundry room a lot. And humidify. We stayed in an AirBNB with one of these, it made the room it was in super hot and took probably 4 hours to dry one load of clothes. It made me appreciate my gas dryer.
|
# ? Sep 21, 2021 00:38 |
|
H110Hawk posted:This is what we did. The key is being pretty level in the measurements. Also, after the first order we paid the $75 for measuring as well. Some person stopped by and measured out every window in the house in about the time it took us to fret over 1. Huh, I checked on blinds.com for installation and got some weird robocalls from a place several states a way that I didn't remotely feel comfortable scheduling with.
|
# ? Sep 21, 2021 00:45 |
|
Fallom posted:Huh, I checked on blinds.com for installation and got some weird robocalls from a place several states a way that I didn't remotely feel comfortable scheduling with. So did we as I recall. The dude who showed up for us was chill. Didn't murder us, didn't steal anything we noticed, cleaned up the trash as he was supposed to, and left promptly.
|
# ? Sep 21, 2021 00:52 |
|
devicenull posted:We stayed in an AirBNB with one of these, it made the room it was in super hot and took probably 4 hours to dry one load of clothes. It made me appreciate my gas dryer. I think if you lock it up in a tiny sealed room, a condenser dryer takes forever. It needs to have someplace for the water to dissipate. "The surrounding closet" isn't enough space. It's also possible you had a crappy dryer. Our Bosch is nice and speedy, despite apparently being an energy hog.
|
# ? Sep 21, 2021 01:01 |
|
I converted one of my spare bedrooms into a gym and a laundry, and the ventless dryer does make it pretty toasty but nothing crazy. I did have to put a pan under it because it wanted to pee the floor while drying bedsheets, but for regular clothes it's absolutely fine.
|
# ? Sep 21, 2021 02:00 |
|
I tried to google around to determine what a reasonable humidity range for a home is, and I got a million different answers. My hygrometer reads 55%, should I buy a dehumidifer?
|
# ? Sep 21, 2021 02:25 |
|
These ventless dryers sound a lot worse than vented dryers
|
# ? Sep 21, 2021 02:34 |
|
Vim Fuego posted:These ventless dryers sound a lot worse than vented dryers The only place I could put the dryer where it could be next to the washing machine and not require a huge new water run was against an interior wall. I deal with it.
|
# ? Sep 21, 2021 02:39 |
|
Yeah, they sound fine as a solution for situations where the vent is a problem. But I'm not gonna hurry to replace my already vented dryer with something where I have to worry about hauling a tray of water out or running a new drain line.
|
# ? Sep 21, 2021 02:41 |
|
Vim Fuego posted:Yeah, they sound fine as a solution for situations where the vent is a problem. But I'm not gonna hurry to replace my already vented dryer with something where I have to worry about hauling a tray of water out or running a new drain line. We used the drain line the washing machine was hooked into and plugged the vent outlet. But drat am I mad that we replaced our dryer with something that uses *more* energy. We have been trying for a decade to *reduce* our energy use. I am getting increasing angry about this.
|
# ? Sep 21, 2021 02:47 |
|
cruft posted:We used the drain line the washing machine was hooked into and plugged the vent outlet. Was your old one electric?
|
# ? Sep 21, 2021 03:05 |
|
H110Hawk posted:Was your old one electric? Yeah, electric vented dryer. I replaced it thinking condenser meant heat pump, i guess.
|
# ? Sep 21, 2021 03:13 |
|
QuarkJets posted:I tried to google around to determine what a reasonable humidity range for a home is, and I got a million different answers. My hygrometer reads 55%, should I buy a dehumidifer? 55-60% is perfect and ideal. Our AC has a dehumidifier setting and while you can adjust the goal, 60% is the default.
|
# ? Sep 21, 2021 03:15 |
|
QuarkJets posted:I tried to google around to determine what a reasonable humidity range for a home is, and I got a million different answers. My hygrometer reads 55%, should I buy a dehumidifer? If you feel comfortable then that level is totally fine. Personally I prefer 45-50% and need a dehumidifier in my basement to keep it around that amount.
|
# ? Sep 21, 2021 12:34 |
QuarkJets posted:I tried to google around to determine what a reasonable humidity range for a home is, and I got a million different answers. My hygrometer reads 55%, should I buy a dehumidifer? Do you feel comfortable at that humidity? Do any of your cold water pipes sweat / build up condensation? If you feel good there and don't have condensation issues it's probably fine. My basement water pipes from the well will develop some condensation and drip water if the humidity gets above 60% and I notice that it's pretty comfortable in the house even above 75F if the humidity is 55% so at our place we keep a dehumidifier going that's set at 55% and we keep the house as close to that as we can. In the winter we end up using a humidifier sometimes. I live in coastal new england so the humidity can go from 90% in the summer to 20-30% in the winter. I find 50-55% to be very comfortable and presents no excess moisture issues inside the house.
|
|
# ? Sep 21, 2021 12:39 |
|
I tried to understand the dew point once but failed. But isn't all of that relates to calculating the (indoor) few point?
|
# ? Sep 21, 2021 13:10 |
|
PainterofCrap posted:I insulated my house with the blown-in kit from Home Depot. The exterior is (from outside in): 6-coats paint (bottom 4 are lead-based); asbestos siding; 3/4" dutch lap, 3/4" tongue & groove sheathing. Used a diamond hole saw to cut the siding, then a 1/4" smaller diameter hole saw to cut through the sheathing. For just drilling into AC shingles, shaving cream is reasonably ok. I’d still wear a respirator, but if you work quickly (and it’s not a super hot day) the foam traps the dust and you can just scape it into a bag. Good if you’re working by yourself and don’t want to try to hold a hose and drill at the same time. If you’re using a hole saw it wouldn’t really work. There are also hepa-filtered tool shrouds you can rent, although I doubt the rental house would appreciate you sucking asbestos fibers through it.
|
# ? Sep 21, 2021 13:18 |
|
falz posted:I tried to understand the dew point once but failed. Dew point and % humidity are directly related, yeah. Air can hold more water the warmer it is, so a room at 60F and 50% humidity would have more water in the air than a room at 80F and 50% humidity. That means if the temperature stayed the same and you ran a dehumidifier until all the water was removed, the dehumidifier in the 80F room would have more water in the dehumidifier basin. For fun lets say the 60F room had 1 gallon of water in the air, the 80F room had 2 gallons. If you took that same 80F room and decreased the temperature without changing how much water was in the air, the %humidity would increase (because there are still 2 gallons of water vapor in the air). At a certain point of cooling down, the 2 gallons of water would be too much water vapor for the air (100% humidity), and it would start to form as water droplets as the room continued to cool. The temperature where it hits 100% humidity and starts to form as water droplets is the dew point. For the purposes of interpreting dew point in weather forecasts, it pretty much just means the closer the dew point is to the actual temperature, the more saturated the air is with water, and the more humid it feels. Blowjob Overtime fucked around with this message at 14:29 on Sep 21, 2021 |
# ? Sep 21, 2021 14:24 |
|
falz posted:I tried to understand the dew point once but failed. Air can hold more moisture when it's warmer. As the air cools, for a given amount of moisture in the air, eventually water will have to condense out because the air can't hold as much moisture anymore. The temperature where that happens is the dew point. Edit: ^^^^^ Yeah that
|
# ? Sep 21, 2021 14:25 |
|
Ultimately, dew point/RH% is important for things like basements because they tend to be cooler than the rest of the house. As humid air (say 60% RH) moves down to the basement, it gets cooled and the RH% goes up (>60% RH). This can make it hit the dewpoint on cool surfaces like the walls/floor and lead to condensation. This (now liquid) water is what mold/mildew craves, and will rapidly multiply on most common household surfaces. This is especially bad if the temp remains somewhat warm (>60F) in the basement at those high humidity levels, because the mold grows faster at warmer temps.
|
# ? Sep 21, 2021 15:09 |
|
cruft posted:We used the drain line the washing machine was hooked into and plugged the vent outlet. I'm following up on my own post with more details, in case it helps someone else. The heat pump dryer we'd replace this with needs the ambient temperature to be between 15 and 30° (59-86F). This wasn't stated in the spec sheet, I had to search the owner's manual to find it. Because our laundry room is detached from the house, and because we live in a mountain town, this is totally unworkable for us. We would have to run an electric resistance heater to raise the temperature of the laundry room, which would negate any energy savings from the more efficient heat pump dryer. So we're sticking with what we have.
|
# ? Sep 21, 2021 15:10 |
|
Vim Fuego posted:These ventless dryers sound a lot worse than vented dryers This house doesn't have a vent and it would be a pain in the rear end to put one in, but the combo washer/dryer (which came with the place brand new) works pretty well for me and is fairly energy efficient . With a huge family I would want something that dries faster, but I just toss poo poo in the hole, put in some laundry detergent, and come back to clean laundry a few hours later.
|
# ? Sep 21, 2021 23:50 |
|
Johnny Truant posted:Lol well this was already gonna happen cause POs royally hosed up basically all the trim, like dig this: The sequel:
|
# ? Sep 22, 2021 01:15 |
|
Wallet posted:This house doesn't have a vent and it would be a pain in the rear end to put one in, but the combo washer/dryer (which came with the place brand new) works pretty well for me and is fairly energy efficient . With a huge family I would want something that dries faster, but I just toss poo poo in the hole, put in some laundry detergent, and come back to clean laundry a few hours later. That sounds amazing. No joke, I'm a little jealous.
|
# ? Sep 22, 2021 01:15 |
|
Johnny Truant posted:The sequel: Wait what was holding it on? Thoughts and prayers??
|
# ? Sep 22, 2021 01:32 |
|
NomNomNom posted:Wait what was holding it on? Thoughts and prayers?? Lol, we did pop the nails outta all the trim before tossing it. But there were two 6ft sections held on with two nails only, then multiple <2ft sections with 4-6 nails and glue Pulled up the entire first floor today before noon though, because the only actual fasteners were 3 screws underneath the transitions. So the POs absolute idiocy and fuckbrainery actually helped us out this time! We were gifted with their masterful cuts: And they even left us some drywall patch mesh stuff as a gift! They just hid it! ...under the floor?
|
# ? Sep 22, 2021 01:44 |
|
Wtf. I cant tell what type of floor that is but in case anyone wants to install vinyl plank more easily.. instead of cutting the floor like a psychopath, use an oscillating saw to cut out under and around the trim area. Oh And of course take all of the trim off first, so this is mainly useful around door frames.
|
# ? Sep 22, 2021 02:01 |
|
That’s carpet seam tape. Still doesn’t make sense for it to be there though
|
# ? Sep 22, 2021 02:43 |
|
Some of my LVP cuts are similarly janky and I'm not sorry because it's all hidden under trims and baseboards.
|
# ? Sep 22, 2021 02:58 |
|
skipdogg posted:That’s carpet seam tape. Still doesn’t make sense for it to be there though That's from the previously installed carpet. They just didn't remove it! Lucky they at least removed the carpet before laying the planks down
|
# ? Sep 22, 2021 03:10 |
|
skipdogg posted:That’s carpet seam tape. Still doesn’t make sense for it to be there though Vim Fuego posted:That's from the previously installed carpet. They just didn't remove it! They also never actually adhered it properly. Like, I just picked that up. It wasn't stuck to anything. They just... set it there. Then put other poo poo on top of it.
|
# ? Sep 22, 2021 03:45 |
|
An unassisted gravity installation may be allowed by the flooring manufacturer. You can check the product manual
|
# ? Sep 22, 2021 04:09 |
|
Vim Fuego posted:That's from the previously installed carpet. They just didn't remove it! I have been in a home where they laid snaplock laminate right over the carpet. Whole time I was there I felt like I was drunk.
|
# ? Sep 22, 2021 04:43 |
|
PainterofCrap posted:I have been in a home where they laid snaplock laminate right over the carpet. Whole time I was there I felt like I was drunk. The absolute worst flooring decision I've ever seen was a fixer upper my buddy bought. Hammered original hardwood floors (which have been sanded and refinished and are gorgeous now) with 1/2 drywall over them and tile on top. When he bought the place it was well into having failed and the normal traffic paths were all........crunchy. Who the hell comes up with these ideas? We don't even have a serious meth problem around here.
|
# ? Sep 22, 2021 04:47 |
|
cruft posted:We used the drain line the washing machine was hooked into and plugged the vent outlet. The russians just used a clothesline
|
# ? Sep 22, 2021 09:06 |
|
Vim Fuego posted:An unassisted gravity installation may be allowed by the flooring manufacturer. You can check the product manual this is sarcasm, right? I love the distribution of holes here:
|
# ? Sep 22, 2021 16:18 |
Johnny Truant posted:this is sarcasm, right? I think it's inevitable at some point you're going to just be finding bloodstains and obvious fingernail marks behind all this lovely drywall, wallpaper and linoleum at this point.
|
|
# ? Sep 22, 2021 17:18 |
|
|
# ? May 30, 2024 09:04 |
Johnny Truant posted:The sequel: punished
|
|
# ? Sep 22, 2021 17:44 |