|
tater_salad posted:How are the 18v 5.5" how quickly will it chew through battery. Basically I've been ripping throgh the 2x4s they used as loving.decking.. between the stringers and then using the sawzall to cut out the stringers. I've got like 2 4ah, 2 3ah and I think 4 1.5ah batteries. If they're not going to overheat while ripping old rear end wet 2x4s, I'll try and grab a worm drive. I've got a corded saw and two battery (one ryobi and one DeWalt 20v). The key to battery saws is 4ah batteries. You'll cut several 4x8 sheets no problem. If you have batteries to cycle out you should be fine. If it's an all day thing, you need more power, and you've got an outlet nearby, a corded saw might be nice.
|
# ? Apr 11, 2022 17:39 |
|
|
# ? May 30, 2024 09:54 |
|
This will be a 2 hour deal. I have lots of battetirs and chargers. But I may go corded for this project the 5.5" blade is going to mean the full (1/2) of the blade is buried. It's.not cutting sheet goods.. it's demo that's made easier with a circ than a recip because I can just run between the nail lines.
|
# ? Apr 11, 2022 17:54 |
|
tater_salad posted:Sadly my areas used tool market in my area is 80% of new. Or found in grandpa's basement doesn't work $15 for parts only. What brand? I have a Ryobi tiny saw like that I used to make some quick cuts on 2x4s a bit back and I was surprised by how good it felt, even with the lovely stock blade. I'm not sure how fast it eats battery though, i didn't make that many cuts.
|
# ? Apr 11, 2022 18:11 |
|
I need to sharpen some Forstner bits after drat near starting a fire trying to hog out the bulk of a vase I'm turning. Any suggestions for a diamond file/set for this purpose, or are they pretty much all the same these days?
|
# ? Apr 11, 2022 18:27 |
|
Well 5.5" blade means 2 3/4 inch is full depth. A 2x4 is 1 3/4 inch so I guess that's closer to 1" of free blade ( so a bit less bogging than my brain thought ). We're not talking quick cuts.. were talking running the saw through a line of 10 2x4s, then doing the same on the other side. Picking up the liberated wood then doing it 4 times across. Then doing the next 10 until I go those about 40 2x4s (yes the PO decked with 2x4s it's so awesome). I'd do this with a recip saw but the horizontal joists get in the way so I end up bouncing off of them, a circular saw means I can just set the depth to 2" and rip right down the deck come back later and remove the joists.
|
# ? Apr 11, 2022 18:30 |
|
tater_salad posted:Well 5.5" blade means 2 3/4 inch is full depth. A 2x4 is 1 3/4 inch so I guess that's closer to 1" of free blade ( so a bit less bogging than my brain thought ). We're not talking quick cuts.. were talking running the saw through a line of 10 2x4s, then doing the same on the other side. Picking up the liberated wood then doing it 4 times across. Then doing the next 10 until I go those about 40 2x4s (yes the PO decked with 2x4s it's so awesome). Yeah, I can see that. I was just offering the bit that I did know, which is that my Ryobi's power felt pretty good. However, I'm not sure how well it'll work under the circumstances you described. I think if you made sure all your batteries were charged before you started, you'd be unlikely to run out of juice. I have my own insane deck demolition project to work on this summer so at some point I might be able to share my experiences: The very bottom layer of the deck appears to be attached to sunk posts, so at some point this project might not have been a disaster. But the half nearest the house is slanting toward the house and is resting on stacked beams: That part of the rail wobbles pretty alarmingly if you try and wiggle it.
|
# ? Apr 11, 2022 18:39 |
|
Got a good craigslist score. I just moved to a house with a little baby grass lawn from a house with no lawn. Guy on Craigslist replaced his mower with a 20" brushless Ryobi cordless mower about 3 months ago, and then moved from a house with a lawn to a house with no lawn. $145 and it looks extremely clean and barely used. I did have to drive ~20 minutes to get it, which today means a not negligible cost for fuel.
|
# ? Apr 11, 2022 18:50 |
|
tater_salad posted:This will be a 2 hour deal. I have lots of battetirs and chargers. But I may go corded for this project the 5.5" blade is going to mean the full (1/2) of the blade is buried. It's.not cutting sheet goods.. it's demo that's made easier with a circ than a recip because I can just run between the nail lines. get a full size corded!! It'll last you a lifetime and 7 1/4 blades are less expensive than 6 1/2 ... cordless circ saws are really liberating and will have you using your circ saw in all new ways but this project has corded written all over it convince this old codger to ship this beauty to you https://www.facebook.com/marketplace/item/371053891563340/ canyoneer posted:Got a good craigslist score. this uses the 40v batteries?
|
# ? Apr 11, 2022 19:02 |
|
OMG that saw is beautiful 😍
|
# ? Apr 11, 2022 19:25 |
|
BIG-DICK-BUTT-gently caress posted:get a full size corded!! It'll last you a lifetime and 7 1/4 blades are less expensive than 6 1/2 ... cordless circ saws are really liberating and will have you using your circ saw in all new ways but this project has corded written all over it yes, 40v batteries. Pretty pleased with it. The circular saw I want is this dinosaur old Porter Cable with "TOM SILVA" written on the housing in blue sharpie. I hope this artifact will let me absorb some of his power. https://www.youtube.com/watch?v=kMlm3SciI-s
|
# ? Apr 11, 2022 19:38 |
|
If someone took the time to write/etch their name into a tool, they are likely the kind of person you want to buy tools from. Funny because its a thing my dad did all the time. My first few power tools were garage sale finds from old guys who did the same. Sure as poo poo, go in my garage and all my powertools have my name on them.
|
# ? Apr 11, 2022 21:02 |
|
canyoneer posted:yes, 40v batteries. Pretty pleased with it. I think that's a Saw Boss https://www.ebay.com/itm/353999684134?hash=item526c068226:g:mBoAAOSwvRpiUOMJ He uses a Porter Cable 314 trim saw too, it's a blade-right worm drive w a 4 1/2" blade. Super cool saw but they're pricey and idk what I'd use it for
|
# ? Apr 11, 2022 21:16 |
|
Trabant posted:I need to sharpen some Forstner bits after drat near starting a fire trying to hog out the bulk of a vase I'm turning. Any suggestions for a diamond file/set for this purpose, or are they pretty much all the same these days? I've had good luck with some basic needle files, regular type not diamond. My bits were also super dull but I wasn't drilling into anything particularly hard so it was good enough. Mostly just takes patience.
|
# ? Apr 11, 2022 21:17 |
|
wesleywillis posted:Typical guy bragging about his giant deck.. Don't make me post pics.
|
# ? Apr 11, 2022 22:26 |
|
Re: Worm drive Skil saw, I've got a DeWalt cordless coming in from the Home Depot hack this weekend so will be selling the worm drive. It's stupidly powerful but I find excuses not to use it it's so heavy. Now that I have my bandsaw don't need the horsepower to do big rip cuts either which is what I got it for. How much should I be looking to get for it? Also, anyone in central Texas who needs one give me a shout.
|
# ? Apr 12, 2022 01:01 |
|
Bob Mundon posted:Re: Worm drive Skil saw, I've got a DeWalt cordless coming in from the Home Depot hack this weekend so will be selling the worm drive. It's stupidly powerful but I find excuses not to use it it's so heavy. Now that I have my bandsaw don't need the horsepower to do big rip cuts either which is what I got it for. In my area a saw like that would get listed for a bill and sold for probably $75 depending on age if it's in ready to use today condition. More if it's closer to new less if it's older. This is extremely dependent on what the used market around you is like. Look around craigslist and Facebook marketplace for comps and try and settle around what you see every one else charging. Unless your me, then you list it for $5 just to get it the gently caress out of your shop OH MY GOD THERE'S SO MUCH poo poo PLEASE HELP ME I'M DROWNING.
|
# ? Apr 12, 2022 01:17 |
|
Bob Mundon posted:Re: Worm drive Skil saw, I've got a DeWalt cordless coming in from the Home Depot hack this weekend so will be selling the worm drive. It's stupidly powerful but I find excuses not to use it it's so heavy. Now that I have my bandsaw don't need the horsepower to do big rip cuts either which is what I got it for. I'd hold out for at least ~$100 for a grey handle skilsaw and maybe $130 for a mag77? I recently sold this one for $125 but i'm in chicago
|
# ? Apr 12, 2022 10:42 |
|
I got lucky and bought the display brushless 7 1/4 circular saw from team neon green when I stopped in home depot for something last summer and have not plugged in my Makita since. I'd say its 95% as good as a corded and I haven't needed that 5% yet. My only complaint is that you've got to be a little more careful with long rip cuts because it doesn't have the power to power though a quick pinch from a floppy board like a corded can.
|
# ? Apr 12, 2022 11:17 |
|
stealie72 posted:I got lucky and bought the display brushless 7 1/4 circular saw from team neon green when I stopped in home depot for something last summer and have not plugged in my Makita since. I'd say its 95% as good as a corded and I haven't needed that 5% yet. Theres your 5%
|
# ? Apr 12, 2022 11:28 |
|
canyoneer posted:yes, 40v batteries. Pretty pleased with it. cast not in the name of Tom Silva, ye unworthy
|
# ? Apr 12, 2022 11:34 |
|
quote:Tom Silva voice: "The homeowner asked us to turn the attic of this 1830's home into a finished space, and we've got to do a lot here with the insulation for these New England winters. We're going to insulate it to R-55 and add some structural beams in case the home owners decide later to store a collection of gold bars, vintage bank vaults, or two to three African elephants upstairs"
|
# ? Apr 12, 2022 12:07 |
|
BeatMasterJ was like the anti-Tom Silva
|
# ? Apr 12, 2022 12:31 |
|
stealie72 posted:I got lucky and bought the display brushless 7 1/4 circular saw from team neon green when I stopped in home depot for something last summer and have not plugged in my Makita since. I'd say its 95% as good as a corded and I haven't needed that 5% yet. Yeah exactly why I got the worm drive, even my cheapo corded wasn't even enough for that. Bandsaw now though so now just need one for quick crosscuts I don't want to be hassled with lugging out the Skil saw and cord. Unless I were to be cutting up 4x4 posts can't really see a need at this point.
|
# ? Apr 12, 2022 12:57 |
|
wesleywillis posted:Theres your 5%
|
# ? Apr 12, 2022 14:44 |
|
oXDemosthenesXo posted:I've had good luck with some basic needle files, regular type not diamond. Thanks!
|
# ? Apr 12, 2022 14:50 |
|
Like 6 months ago i promised a trip report on my 40v 18" Ryobi chainsaw when I did some actual work with it This weekend I took down and bucked up a full sized (dead) scotch pine. It did the job well but I'm glad that I had two batteries.
|
# ? Apr 12, 2022 16:00 |
|
Mower update: I decided to buy once and cry once, went with the Ego Select Cut XP with the 10ah battery. I probably would have been fine with a cheaper model but I wanted to make sure I wouldn’t need to replace the battery in 3 years to be able to my whole yard. 10ah batteries has a 5 year warranty while the smaller ones have a 3 year warranty. I cut and bagged my 1/3rd of acre lot with a hill and still had over 20% charge remaining. Vertical storage is the real reason everyone should by electric mowers.
|
# ? Apr 12, 2022 16:25 |
|
CommonShore posted:Like 6 months ago i promised a trip report on my 40v 18" Ryobi chainsaw when I did some actual work with it This has been my experience with the 18". Works great, hard to stall with good technique and a sharp chain, battery hungry as hell.
|
# ? Apr 12, 2022 16:36 |
|
Mr. Mambold posted:Don't make me post pics. Whoa actual pictures of your work not just outdated dad jokes? No way
|
# ? Apr 12, 2022 17:15 |
|
Calidus posted:Mower update: I decided to buy once and cry once, went with the Ego Select Cut XP with the 10ah battery. I probably would have been fine with a cheaper model but I wanted to make sure I wouldn’t need to replace the battery in 3 years to be able to my whole yard. 10ah batteries has a 5 year warranty while the smaller ones have a 3 year warranty. I cut and bagged my 1/3rd of acre lot with a hill and still had over 20% charge remaining. Vertical storage is the real reason everyone should by electric mowers. Seriously, tucks right up against the wall. But I would argue the real reason is the spring tuneup involved sharpening the blade and popping the battery in. No more oil changes and spark plug/filter replacements. Also don't know about the 10ah, but the 7.5 takes about as long to charge as the 2.5 takes to run out so it's pretty easy just to swap off the charger and perpetually have a fully charged battery.
|
# ? Apr 12, 2022 17:43 |
|
Harry Potter on Ice posted:Whoa actual pictures of your work not just outdated dad jokes? No way This is the Tools thread. I'll post one in woodworking.
|
# ? Apr 12, 2022 19:03 |
|
I'm about to experience an impending weather disaster which Environment Canada has said "prepare for long power outages" and I just bought an item that lets me charge my phone (3000 mAh battery, according to the spec sheet) from my cordless 18v power tool batteries, 4.0 Ah/72 Wh) How many times will I be able to recharge that phone battery from my drill battery under ideal circumstances? 1.25x, as suggested from my basic understanding of the numbers seems... wrong, given how much chonkier that drill battery is than the phone. CommonShore fucked around with this message at 20:27 on Apr 12, 2022 |
# ? Apr 12, 2022 20:25 |
|
You need the voltage of your phone as well. USB is 5V, but I don't know if that's what the actual phone is at. So I think then you'd multiple your (4/3) by (18/5) to get... 4.8? Yeah that doesn't sound right either. E: I think you'd be able to charge 4.8 phones at once from your battery, but no idea about "capacity." FISHMANPET fucked around with this message at 20:55 on Apr 12, 2022 |
# ? Apr 12, 2022 20:53 |
|
If this thing works well it could be a dream come true. https://www.acmetools.com/dewalt-20...edium=affiliate
|
# ? Apr 12, 2022 21:19 |
|
CommonShore posted:I'm about to experience an impending weather disaster which Environment Canada has said "prepare for long power outages" and I just bought an item that lets me charge my phone (3000 mAh battery, according to the spec sheet) from my cordless 18v power tool batteries, 4.0 Ah/72 Wh) Smartphone batteries work at 3.8 volts, which means your phone battery is ~ 3 x 3.8 = 11.4 Wh, so maybe about six times? It's DC to DC so it should be reasonably efficient but you'll probably still see some losses.
|
# ? Apr 12, 2022 21:27 |
|
Danhenge posted:Smartphone batteries work at 3.8 volts, which means your phone battery is ~ 3 x 3.8 = 11.4 Wh, so maybe about six times? It's DC to DC so it should be reasonably efficient but you'll probably still see some losses. about 6x seems like a good enough estimate for my purposes. Thanks a ton. Wish me luck that I don't need to use the information!
|
# ? Apr 12, 2022 22:10 |
|
Bob Mundon posted:No more oil changes and spark plug/filter replacements. Wait, what? You're supposed to do that?
|
# ? Apr 12, 2022 23:21 |
|
CommonShore posted:about 6x seems like a good enough estimate for my purposes. Thanks a ton. Wish me luck that I don't need to use the information! Also sounds like you need more batteries
|
# ? Apr 12, 2022 23:43 |
|
sharkytm posted:Wait, what? You're supposed to do that? You mean they aren't supposed to choke out after a couple years and billow smoke out the exhaust? So happy I no longer have to deal with that.
|
# ? Apr 12, 2022 23:43 |
|
|
# ? May 30, 2024 09:54 |
|
Bob Mundon posted:You mean they aren't supposed to choke out after a couple years and billow smoke out the exhaust? What's the point of mowing a lawn if you're not drowning the neighborhood in blue smoke?
|
# ? Apr 12, 2022 23:48 |