|
My step mom owned a painting company forever and just got back to me saying the same, if there aren't already issues, there really isn't a reason for a full caulk job, especially since our eaves keep the house pretty dry as is. Just do the windows/doors and trim if desired. That's what I was thinking and I'm relieved because it would be a ridiculous amount of work. It's lasted this long with no moisture issues in one of the wettest parts of the country but a lot of the painting videos I've watched recommended caulking seams and it felt incredibly excessive which is why I asked.
|
# ? Jul 23, 2022 08:10 |
|
|
# ? May 29, 2024 17:52 |
|
VelociBacon posted:Is there building envelope under that paneling? If so it should be caulked/taped already if your codes are like Canada, and if not I dunno... surely they wouldn't have caulked that originally right? Probably not. And if there was it's just tar paper and it's not taped. But there should be. Which would involve pulling all of that siding. Then again, lots of building of that age are still around and just fine with whatever it is they did or didn't do: they're just not as efficient or comfortable. Do not caulk the siding. They didn't, you shouldn't. That's not where the vapor barrier goes, and it wouldn't actually work as an effective vapor barrier anyway. In fact it would be very likely to rot all the siding out in no time because it's going to make it take longer to get rid of moisture that may get (is getting) behind it. I really don't know how I'd approach that job. Pulling the siding (to keep for re-use) would be a completely miserable job, but might be worth it if the place needed insulation and exterior paint anyway.
|
# ? Jul 23, 2022 14:51 |
|
Has anyone used federal/state incentives to get solar? I'm in Oregon and they're pushing it hard but there's a billion different sites looking for clients and I'm kinda overwhelmed.
|
# ? Jul 23, 2022 16:30 |
|
WILDTURKEY101 posted:I bought this house and they were adamant that the fireplace is as-is and that it's not functional. I'm trying to get it functional and get a chimney person out here to get mine inspected and cleaned. I'm expecting them to try to sell me on a liner, but is that super necessary? Those stainless steel liners are pretty new inventions and people have had fireplaces for a thousand years. Seems to me that if you have a clean flue that you should be good to go. Can any of you speak to this? As a matter of fact, you might want to check with them before you start doing anything.
|
# ? Jul 23, 2022 16:31 |
|
Inzombiac posted:Has anyone used federal/state incentives to get solar? Check out the BFC thread from earlier in the month
|
# ? Jul 23, 2022 18:20 |
|
$17k to dig up and replace a small section of pipe and line the rest of the sewer... man this is expensive!
|
# ? Jul 23, 2022 18:24 |
|
Been couch shopping. Currently have a free couch that was originally sold at World Market. We've tried Pottery Barn, Lovesac, the local discount furniture warehouse, the local high end furniture store (the Keeping Room) and looked all over online. Everything is poo poo (except Hancock and Moore, but the sofa we liked would be $7k+ in the leather we liked. Trying one more midrange store today. Who knew sitting on stuff would be so exhausting.
|
# ? Jul 24, 2022 12:33 |
|
If you have pets/kids/move a lot, home reserve is pretty great. They sell modular furniture and you can buy replacement covers/cushions for when your kids piss on them or your dogs and cats shred them. They ship the furniture in boxes and you assemble it yourself. The quality is better than what you might think. We bought a sectional from them almost ten years ago that we're still using.
|
# ? Jul 24, 2022 14:27 |
|
My beloved Kenmore super duty stackable washer dryer isn't rotating the wash drum during the cycle. Is it hubris to think I could swap the motor if I can source one, or should I just look to replace? I've never done anything like it before but am generally competent. What brands/styles should I avoid/look for? It's electric, not gas hookup. Looking online there's some GEs for 650 but the reviews are bad.
|
# ? Jul 24, 2022 14:37 |
|
majour333 posted:My beloved Kenmore super duty stackable washer dryer isn't rotating the wash drum during the cycle. it might be a belt too and not the motor
|
# ? Jul 24, 2022 18:05 |
|
Eason the Fifth posted:If you have pets/kids/move a lot, home reserve is pretty great. They sell modular furniture and you can buy replacement covers/cushions for when your kids piss on them or your dogs and cats shred them. They ship the furniture in boxes and you assemble it yourself. The quality is better than what you might think. We bought a sectional from them almost ten years ago that we're still using. No kids, one well behaved dog. Just got home from Hamilton's Sofa Gallery. It was fine. Probably just going to order the Article.
|
# ? Jul 24, 2022 18:14 |
|
NomNomNom posted:No kids, one well behaved dog. Please don’t. Article stuff is just overpriced made in china crap with a fancy website. There’s a middle ground between cheap couches and Hancock and Moore/ Bradington & Young level couches. My furniture advice is to find a locally owned store. No chains. No stockholder’s. They’ll probably have lots of sources for furniture. Tell them what your looking for and what’s important and see what they have. Some middle ground couch manufacturers are Palliser, Southern Motion, Flexsteel (some lines are better than others), Omnia and others. I have a large Palliser sectional and I’m very happy with the cost:quality ratio. It ran me about 6K delivered 4 years ago.
|
# ? Jul 24, 2022 18:49 |
|
NomNomNom posted:Been couch shopping. Currently have a free couch that was originally sold at World Market. Room & Board stuff seems to be okay. My sister has this I think and it's comfortable and big enough to sleep on. They do have some leather options too. My brother has had a room & board sofa for probably 8? years and it's held up pretty well.
|
# ? Jul 25, 2022 01:54 |
|
majour333 posted:My beloved Kenmore super duty stackable washer dryer isn't rotating the wash drum during the cycle. Which model is it? We have an electrolux full size front loader set and really like it. Had it now for over 5 years and been flawless. One thing I wish it had and was more common is a reversing dryer drum. We had a Kenmore years ago that did that but none of them since have and I really miss it. Makes doing big things like sheets, much simpler and not get tangled and balled up as easy.
|
# ? Jul 26, 2022 01:09 |
|
I'm having my kitchen cabinets "remodeled" this week. They are traditional (ew) maple framed cabinets, which I hate. Instead of replacing all the cabinets, I'm doing the same thing as my bathroom, where the face frame is painted, and new larger doors and drawers are being installed that make it look frameless. The doors and drawers also have no handles - the doors have those hinges where you push in and the door pops out, and the drawers are using the new blum movento system, with the same kind of motion - you push the drawer closed and it's "grabbed" to pull it in the rest of the way. The cost of this is less than half of what putting in brand new cabinets would be, and since the cabinets are in good shape and do not need to be moved, it seems like the right choice for me. The doors and drawers will be this color. this is my second to last major project - I will be having my one piece shower/tub surround replaced with a tiled walk-in shower next month. M - taping (first pic) T (today) - priming (other two pics) W - tomorrow - painting Th - new door and drawer install (might go into Friday) So right now I cannot use my sink (using my bathtub to wash dishes), and all of my appliances are sitting in my living room. I'm just sitting in my entry. That ducting is blowing the fumes out through my patio door. actionjackson fucked around with this message at 19:08 on Jul 26, 2022 |
# ? Jul 26, 2022 18:48 |
|
actionjackson posted:the doors have those hinges where you push in and the door pops out, and the drawers are using the new blum movento system, with the same kind of motion - you push the drawer closed and it's "grabbed" to pull it in the rest of the way. I hope you cleared this with whomever does the cooking in your house because I would loving hate this. I just got back from an air b&b where the microwave had a drawer-movement like that and it was like i was fighting a sentient drawer every time i used it.
|
# ? Jul 26, 2022 19:34 |
|
Corla Plankun posted:I hope you cleared this with whomever does the cooking in your house because I would loving hate this. I'm the only one that lives here, and I've already done it in my bathroom. I have no idea what system those drawers have so I can't comment, but the movento stuff works very well
|
# ? Jul 26, 2022 19:47 |
|
Soft close drawers are amazing. Only thing better is a soft close toilet seat.
|
# ? Jul 26, 2022 21:24 |
|
H110Hawk posted:Soft close drawers are amazing. Only thing better is a soft close toilet seat. oh yeah i have that too, alpha gx wave bidet seat it is true that if you have a lot of smaller items like utensils, using a tray and maybe some antislip materials is helpful so they don't move around much when you close it
|
# ? Jul 26, 2022 21:28 |
|
Just be careful with soft close toilet lids, you'll start accidentally slamming toilet lids when you visit someone with normal toilet seats.
|
# ? Jul 26, 2022 21:29 |
|
actionjackson posted:oh yeah i have that too, alpha gx wave bidet seat Soft close stopped working on our $300 bidet seat and it's annoying enough that I'm considering moving it to the guest bathroom and getting another that works for the main bathroom. FISHMANPET posted:Just be careful with soft close toilet lids, you'll start accidentally slamming toilet lids when you visit someone with normal toilet seats. EVERY. drat. TIME.
|
# ? Jul 26, 2022 21:30 |
|
My parents' kitchen has soft close cabinets and drawers except for one set of cabinets, and boy can you tell when someone uses those.
|
# ? Jul 26, 2022 21:32 |
|
or just have the seat down at all times and have very good aim
|
# ? Jul 26, 2022 21:46 |
|
FISHMANPET posted:Just be careful with soft close toilet lids, you'll start accidentally slamming toilet lids when you visit someone with normal toilet seats. You mean people with strange antiquated toilet seats. Like a lot of hotels. Sorry sleeping family, both my own and I presume for several rooms over.
|
# ? Jul 26, 2022 21:48 |
|
Our new kitchen has soft close doors and drawers and holy poo poo yeah it's amazing.
|
# ? Jul 27, 2022 00:01 |
|
actionjackson posted:or just have the seat down at all times and have very good aim When I'm at home I sit down to pee every time. Standing to pee is overrated.
|
# ? Jul 27, 2022 00:10 |
|
My cabinets are not soft closing and in fact require an extra hard shove to close and jerk to open because I purposefully installed extra high tension brass latches. This was in response to a 7.1 earthquake a month after we moved in sending half our kitchenware crashing to the ground. I wonder how well push-to-open and soft close mechanisms resist being flung open during something like that.
|
# ? Jul 27, 2022 00:28 |
|
dunno we don't have many earthquakes in minnesota
|
# ? Jul 27, 2022 00:30 |
|
Went to Lowes and managed to only drive there once for two trips.
|
# ? Jul 27, 2022 21:12 |
|
I have purchased the giant skeleton from Home Depot. Gonna pair it with the coffin-shaped wedding arch my dad made me. Goth Lyfe.
|
# ? Jul 27, 2022 22:15 |
|
they did the painting today - used sher-wood hi-bild pre-cat lacquer
actionjackson fucked around with this message at 23:14 on Jul 27, 2022 |
# ? Jul 27, 2022 23:12 |
|
oops forgot attachment
|
# ? Jul 27, 2022 23:14 |
|
Inzombiac posted:I have purchased the giant skeleton from Home Depot. Just a little jealous, ngl.
|
# ? Jul 27, 2022 23:15 |
|
actionjackson posted:oops forgot attachment Ooh I spy a Festool dust extractor, they were surface preppin like a champ. Those things own, I have access to sales demo units and I look for any excuse to bring one home and sand poo poo. Looking good over there.
|
# ? Jul 27, 2022 23:36 |
|
Final Blog Entry posted:Ooh I spy a Festool dust extractor, they were surface preppin like a champ. Those things own, I have access to sales demo units and I look for any excuse to bring one home and sand poo poo. Looking good over there. yeah i saw that and recognized it from a vid about popcorn removal - talked to the guy about possibly taking down the texture on my ceiling and doing a level 5 flat next year. ceiling is in really good shape and the popcorn is pretty light, and is painted, but I kept his number. I didn't realize it could be done in a few segments, which is good because I then I could just stay in another area of my place while he does each section.
|
# ? Jul 27, 2022 23:48 |
|
actionjackson posted:they did the painting today - used sher-wood hi-bild pre-cat lacquer How bad does your house stink?
|
# ? Jul 27, 2022 23:52 |
|
actionjackson posted:yeah i saw that and recognized it from a vid about popcorn removal - talked to the guy about possibly taking down the texture on my ceiling and doing a level 5 flat next year. ceiling is in really good shape and the popcorn is pretty light, and is painted, but I kept his number. I didn't realize it could be done in a few segments, which is good because I then I could just stay in another area of my place while he does each section. The CT36AC dust extractor and Planex sander is what you want for popcorn removal. If he's just got a CT Midi and Rotex sander or similar setup for cabinets and the like then he's not going to be able to tackle popcorn removal without another large equipment investment.
|
# ? Jul 28, 2022 00:07 |
|
Kaiser Schnitzel posted:How bad does your house stink? not at all, they vented it out through my front patio door (see picture of ducting earlier), they had the kitchen well sealed off and just had a hole for the ducting, then it went to the patio door, and there was a seal on that as well with just another hole for the ducting. it looks like he used the titan capspray Final Blog Entry posted:The CT36AC dust extractor and Planex sander is what you want for popcorn removal. If he's just got a CT Midi and Rotex sander or similar setup for cabinets and the like then he's not going to be able to tackle popcorn removal without another large equipment investment. ah ok, i just remember festool sounding familiar. he actually subcontracts with this place, he has his own painting business, but it's more larger projects like cabinets, he does do ceilings as well. not so much regular walls. actionjackson fucked around with this message at 01:54 on Jul 28, 2022 |
# ? Jul 28, 2022 01:48 |
|
I have some places in my (paved)driveway that aren’t quite potholes, they’re just like… dents. Place where I guess the ground wasn’t fully compacted and the asphalt subsided a bit - as in, at least an inch if not two, in a couple places. Even worse, one or two of those are right on the edge of the pavement. In some ways a pothole or crack might be easier since it would be contained and “grip”. How do I fix this, like, do I put in some of the chunky pothole patch and sealcoat everything up, or what?
|
# ? Jul 28, 2022 02:31 |
|
|
# ? May 29, 2024 17:52 |
|
actionjackson posted:I'm having my kitchen cabinets "remodeled" this week. They are traditional (ew) maple framed cabinets, which I hate. Instead of replacing all the cabinets, I'm doing the same thing as my bathroom, where the face frame is painted, and new larger doors and drawers are being installed that make it look frameless. The doors and drawers also have no handles - the doors have those hinges where you push in and the door pops out, and the drawers are using the new blum movento system, with the same kind of motion - you push the drawer closed and it's "grabbed" to pull it in the rest of the way. The cost of this is less than half of what putting in brand new cabinets would be, and since the cabinets are in good shape and do not need to be moved, it seems like the right choice for me. The doors and drawers will be this color. Did this myself a few years ago. Total cost was 10% of what a full remodel would cost, not counting my own labor. Figuring out the proper door sizes and spacing and hinge offsets was a pain, luckily I have access to 3d CAD so I only messed up one set of hinges out of approximately 30 doors! e: soft close does indeed own
|
# ? Jul 28, 2022 03:52 |