|
Now I just make mediocre wood things for the work crews. This is to support a piece of machinery with 100lb rated drawers on sliders. The top is recessed so the machine can’t be pushed off by accident. The old counter to the left there was what we were using Sockington fucked around with this message at 21:36 on Oct 19, 2022 |
# ? Oct 19, 2022 19:43 |
|
|
# ? Jun 5, 2024 09:19 |
|
Eww Ooh Ahh Made some shop furniture with some nasty pine my neighbor left when he moved out of the shop space. Turning gross wood back into nice lumber is fun.
|
# ? Oct 20, 2022 00:23 |
|
Meow Meow Meow posted:That is a very nice router table, you're off to a good start. The shading on those flowers is excellent.
|
# ? Oct 20, 2022 00:24 |
|
TooMuchAbstraction posted:Made a box, to hold some building blocks I made for a friend's kid. The finish on that cherry looks fantastic. I like the kind of natural edges at the top, that’s a neat look. Dovetails are hard! They are totally a ‘practice makes perfect’ thing, and even then prepare to still screw up on occasion. I’ve cut, idk, a gazillion dovetails both by hand and with a jig and the other day I still managed to cut some backwards. Easy enough to fix, but one drawer has smaller pins than the rest on the back. ColdPie posted:The shading on those flowers is excellent.
|
# ? Oct 20, 2022 04:02 |
|
Kaiser Schnitzel posted:The finish on that cherry looks fantastic. I like the kind of natural edges at the top, that’s a neat look. Dovetails are hard! They are totally a ‘practice makes perfect’ thing, and even then prepare to still screw up on occasion. I’ve cut, idk, a gazillion dovetails both by hand and with a jig and the other day I still managed to cut some backwards. Easy enough to fix, but one drawer has smaller pins than the rest on the back. Thanks for the kind words! I've done plenty of practice dovetails, but this is the first project I've tried to use them seriously on. I cut the tails on my bandsaw and the pins by hand. Definitely something where I can't imagine getting a super clean fit without using jigs and machine tools for everything.
|
# ? Oct 20, 2022 14:55 |
|
Very cool old desk showed up in my shop this morning: The desk surface slides out too, and the leather part raises up at an angle. I think it was probably a cabinetmaker's own desk judging from the inlays and high quality of materials, possibly as a showpiece in his workshop. A local antiques guy thinks it is English, and he's probably right. Drawer sides and bottoms are all quartered oak which is very English, but the pigeonhole drawer fronts look like curly maple which is a little more American. The flush fit, campaign style hardware on the interior bottom drawers is very English however, I don't think I've ever seen anything like that on an American piece. At first I thought this inlay was some curly southern yellow pine which would have been very cool and unusual, but looking closer at the grain I don't think it is SYP: I have no idea what it actually is. Kind of looks like some curly ash maybe? I'm VERY curious about how the cylinder top was made and how it works. It looks it is veneered on the inside too, but it's hard to tell. I'm just waxing and cleaning up the piece so I don't think I'll be able to take it apart and find out, but it works basically perfectly after 200 years. TooMuchAbstraction posted:Thanks for the kind words! I've done plenty of practice dovetails, but this is the first project I've tried to use them seriously on. I cut the tails on my bandsaw and the pins by hand. Definitely something where I can't imagine getting a super clean fit without using jigs and machine tools for everything.
|
# ? Oct 20, 2022 18:45 |
|
Kaiser Schnitzel posted:Very cool old desk showed up in my shop this morning: Carpentry notes on the left of the desk, Freemason notes on the right
|
# ? Oct 20, 2022 19:37 |
Wallet posted:I know people will have some other recommendations that are more suitable if you're willing to invest some time in learning something more fully featured, but if you want something extremely simple that just lets you figure out if things are going to fit together I really love TinkerCad. It's actually intended for 3d printing and laser cutting, I think, but it has the approximate complexity of MS Paint, it runs in a browser for free, and you can learn how to lay a simple project out in ten whole minutes. Yo I finally got around to checking out the modeling recommendations and this is the one I liked best to just sanity check my simple project, thanks bigly
|
|
# ? Oct 20, 2022 20:02 |
|
Kaiser Schnitzel posted:Very cool old desk showed up in my shop this morning: There's a few maple species growing in Europe too. Field, Norway, and Sycamore maples (Acer campestre, A. platanoides, A. pseudoplatanus iirc), and those have curly grain sometimes too. Or maybe it was imported from North America. Certainly made by someone who had a good eye, that's for sure.
|
# ? Oct 20, 2022 20:29 |
|
Could be chestnut. There was tons of chestnut used in fine woodwork for centuries but we hardly ever see it available any more, because of the blight and mass death of the species.
|
# ? Oct 20, 2022 20:45 |
|
Kaiser Schnitzel posted:Very cool old desk showed up in my shop this morning: My goodness. What an amazing antique. The pores of that piece in the last shot look like walnut, but I've never seen Why is it in your shop? Do you do antique repair?
|
# ? Oct 21, 2022 04:24 |
|
Mr. Mambold posted:My goodness. What an amazing antique. The pores of that piece in the last shot look like walnut, but I've never seen
|
# ? Oct 21, 2022 15:52 |
|
PokeJoe posted:Yo I finally got around to checking out the modeling recommendations and this is the one I liked best to just sanity check my simple project, thanks bigly I’ve never really had a chance to do much 3d or CAD work but feel like I’d love it. Thanks for this for me to look into. Picked up a $60 table saw to get some stuff done I’ve been fighting with. It’s a no frills direct-motor drive, but I can’t argue the price or usability. Fence, extending tables, etc. I sold my similar drive but ancient Delta for $40 a couple years ago with nothing attached, so I’ll call this a solid upgrade.
|
# ? Oct 22, 2022 15:53 |
|
I have the 8 1/4" dewalt table saw and i love it for my needs as a remodeler .. works great for ripping moulding, trim, sheet goods, dimensional lumber, etc AND i can one-hand it up and down stairs no problem. The biggest thing i thought i was missing was the ability to rip 2x4s the long way, ie: 3 1/2" cut depth .... well i found out that the 10" table saws only have 3 1/8" cutting depth What am i really missing out on w the smaller table saw? So far it seems like: -reduced capacity for ripping -reduced cut depth -limited blade selection (honestly my biggest gripe) -no dado stack ability is that it? I realize the reduced rip capacity can be a big issue for woodworkers but the 3 1/8" cut depth changes my tune from "man i need a bigger saw" to "man im glad i have a light saw"
|
# ? Oct 23, 2022 16:32 |
|
I almost rarely use above 2" depth of cut on my tablesaw, I find the bandsaw better suited for thick rips. Also in terms of rip capacity my fence rails are cut down and I only have 16" which is fine for 95% of my sold wood uses. If I was using a lot of plywood 16" might get old, but I don't use that much and my tracksaw handles plywood just fine. I do love using my dado stack though so that would be a downside. In terms of blade selection, I always have a 40 tooth combo blade on it, I don't find myself using specialty blades or anything.
|
# ? Oct 23, 2022 17:03 |
|
If you're doing remodel work then a light table saw that can be where you want it to be without hurting yourself is ideal. There's a reason they make them in roughly 3 sizes and that Dewalt of yours is basically designed from the ground up for people who remodel houses.
|
# ? Oct 23, 2022 17:08 |
|
If your saw isn't choking on the work you give it and you're not having problems keeping it stable when you run stock through yeah you're missing nothing
|
# ? Oct 23, 2022 17:53 |
|
TBH I'd rather do a lot of horrible things than rip construction lumber with a blade 3 1/2" out of the table.
|
# ? Oct 23, 2022 17:58 |
|
Thanks for the affirmations, folks. Yeah I love that little thing but all the YouTube woodworkers have 10" saws so of course FOMO ensues.Hypnolobster posted:TBH I'd rather do a lot of horrible things than rip construction lumber with a blade 3 1/2" out of the table. a couple times a year we do garages and when they don't form the slab with curb edges, my boss rips the mud sill on a bias to compensate for the pitch, to ensure that everything is plumb. I thought he just did it in one shot but he must do half one way and flip it around for the other side, I'll have to ask.
|
# ? Oct 23, 2022 18:12 |
|
I wish my high school had shop class twenty years ago so I wasn’t learning basic wood working in my late 30s. Friend cut me a deal on a pair of Stanley planes and sent me to Matt Estlea’s YouTube to sharpen and set them up. Also picked up a cheap 3.25” wide electric for cleaning up rough cut pieces. I can definitely see why the 12” models are popular after making a few passes at wider boards with my small electric.
|
# ? Oct 24, 2022 21:58 |
|
Me, an idiot, avoided using jigsaws for anything for years because I couldn’t control my old Porter Cable plug-in unit. Every time I tried making any sort of precise cut, it’d just wander off like a dog with ADHD at a tennis tournament. Tried better blades, tried using fences, just couldn’t get a cut that looked even remotely okay. I figured I just sucked at hand guided woodworking and that I was a pure square-cuts-only idiot. Thanks to a lovely gift card from work, I recently bought a Makita XVJ01 as a last resort for a project and holy poo poo, jigsaws are awesome. I know tool brand snobbery is stupid but I could’ve avoided literal years of frustration had I spent proper money on a real tool the first time out.
|
# ? Oct 26, 2022 15:12 |
|
My Ryobi plug in is kind of frustrating too, I should maybe see about getting a nicer one.
|
# ? Oct 26, 2022 15:22 |
|
funeral home DJ posted:Me, an idiot, avoided using jigsaws for anything for years because I couldn’t control my old Porter Cable plug-in unit. Every time I tried making any sort of precise cut, it’d just wander off like a dog with ADHD at a tennis tournament. Tried better blades, tried using fences, just couldn’t get a cut that looked even remotely okay. I figured I just sucked at hand guided woodworking and that I was a pure square-cuts-only idiot. Was your porter-cable barrel handled or D-handled? Barrel handle jigsaw makes all the difference for me, something about pushing the saw rather than pulling it along makes for a much better cut.
|
# ? Oct 26, 2022 15:33 |
|
BIG-DICK-BUTT-gently caress posted:Was your porter-cable barrel handled or D-handled? Barrel handle jigsaw makes all the difference for me, something about pushing the saw rather than pulling it along makes for a much better cut. The Porter Cable is D-handled. It’s such a huge change in control that it’s like a completely different type of tool, like using a track saw instead of a circular. I had no idea why they’d make different control setups for tools but now I see exactly why, the barrel handles just “click” with me I guess.
|
# ? Oct 26, 2022 15:57 |
|
Better jigsaws have waaaaaay better blade guides and that makes all the difference ime.
|
# ? Oct 26, 2022 17:32 |
|
this is insanely niche but has anybody in here every built a turkey coop, specifically? i want to but i have no idea where to start and also i've never done any woodworking in my life. i could very easily get my hands on a ton of recycled wood but i don't know where to begin when it comes to planning it all out
|
# ? Oct 26, 2022 23:25 |
w4ddl3d33 posted:this is insanely niche but has anybody in here every built a turkey coop, specifically? i want to but i have no idea where to start and also i've never done any woodworking in my life. i could very easily get my hands on a ton of recycled wood but i don't know where to begin when it comes to planning it all out You can try the Poultry thread for specific advice. https://forums.somethingawful.com/showthread.php?threadid=3417601&pagenumber=414#lastpost I did a duck coop, but most of my focus is keeping critters & weather out.
|
|
# ? Oct 26, 2022 23:38 |
|
w4ddl3d33 posted:this is insanely niche but has anybody in here every built a turkey coop, specifically? i want to but i have no idea where to start and also i've never done any woodworking in my life. i could very easily get my hands on a ton of recycled wood but i don't know where to begin when it comes to planning it all out Under Dunn recently did a giant chicken coop. His videos are not as funny as he thinks they are, but it's pretty thorough.
|
# ? Oct 26, 2022 23:48 |
|
You take that back sir, try watching his other channel, Aging Wheels. It's the most fun you can have watching someone change a cv joint. Got four of the next round of storage cubbies assembled. Gotta prep and finish these and get them delivered before the last four.
|
# ? Oct 27, 2022 01:08 |
|
revtoiletduck posted:Under Dunn recently did a giant chicken coop. I don't really get the sense that I'm expected to laugh at every joke so much as he's having fun doing it.
|
# ? Oct 27, 2022 03:42 |
|
NomNomNom posted:You take that back sir, try watching his other channel, Aging Wheels. It's the most fun you can have watching someone change a cv joint. How many millions of Dollars/Euros in plywood is that?
|
# ? Oct 27, 2022 19:04 |
|
The thing with pocket hole jigs is you might think "I'm not doing a ton of stuff that needs pocket holes, I'll get one of the simpler Kreg jigs" but then the problem is it's not that every project will need 1 or 2 pocket holes, it's that any project that uses pocket hole screws needs like 20 of them.
|
# ? Oct 27, 2022 19:06 |
|
okay so. i am a filthy city slicker and i'm trying to figure out things by feel here. if i'm building a coop, to create a roof i just have to build a wooden structure, top it with some insulation, and then attach some roofing sheets, right? what kind of wood is best to go underneath the insulation?
|
# ? Oct 27, 2022 22:08 |
|
w4ddl3d33 posted:okay so. i am a filthy city slicker and i'm trying to figure out things by feel here. if i'm building a coop, to create a roof i just have to build a wooden structure, top it with some insulation, and then attach some roofing sheets, right? what kind of wood is best to go underneath the insulation? Builders in my area use spruce, it's usually whatever softwood is strong and plentiful where you live. That's more of a carpentry question than woodworking though.
|
# ? Oct 27, 2022 23:33 |
|
w4ddl3d33 posted:okay so. i am a filthy city slicker and i'm trying to figure out things by feel here. if i'm building a coop, to create a roof i just have to build a wooden structure, top it with some insulation, and then attach some roofing sheets, right? what kind of wood is best to go underneath the insulation? I would suggest making the roof out of plywood and putting some shingles or something like that on it. I’m not sure where your insulation comes in to play. If it’s a bird coop you want plenty of airflow if possible. They get stinky and if you’re in a cold climate the moisture from poop and breathing will increase the risk of frostbite. Some eave vents are a good idea. If cold is the reason for insulation, think about making the interior space smaller. A drop ceiling can help or some people fill up their coops with hay bales. Turkeys are pretty cold hardy id imagine though.
|
# ? Oct 28, 2022 00:30 |
|
funeral home DJ posted:How many millions of Dollars/Euros in plywood is that? Well it isn't baltic birch. It's "paint grade" Vietnamese birch, was $79 per 4x8 sheet. I sized the units to use one sheet of 3/4“ each, and one third sheet of 1/4“. The quality has been all over the place, some sheets have been flawless, some have had huge voids or delaminations. If they want any more furniture after this order I'm insisting that we use a higher grade.
|
# ? Oct 28, 2022 11:45 |
|
revtoiletduck posted:Under Dunn recently did a giant chicken coop. Thanks for the link, I actually did think he was pretty funny. Danhenge posted:I don't really get the sense that I'm expected to laugh at every joke so much as he's having fun doing it.
|
# ? Oct 28, 2022 16:04 |
|
A simple picture frame for a print I bought: Made from some purpleheart I had lying around. One of the miter joints popped open after I started finishing the wood, so I reinforced the corners with some dowels: Drilling 45-degree holes through the corners of an 18x24" picture frame is kind of a pain, lemme tell you But I'm happy with how it came out!
|
# ? Oct 29, 2022 18:08 |
|
Is there some wiggle room on bandsaw blade length? My bandsaw manual says it takes 80" blades, will a 80.5" blade work?
|
# ? Oct 30, 2022 16:24 |
|
|
# ? Jun 5, 2024 09:19 |
|
Yeah, that should work. Your bandsaw should have a blade tensioner, which moves one of the wheels up/down to maintain the right tension.
|
# ? Oct 30, 2022 16:36 |