|
Neddy Seagoon posted:
the silver ex marker looks like literal chrome its so sick
|
# ? May 11, 2023 13:02 |
|
|
# ? May 28, 2024 15:37 |
|
JoeGlassJAw posted:the silver ex marker looks like literal chrome its so sick I was thinking the same thing, it really does look like chrome once it dries.
|
# ? May 11, 2023 14:12 |
|
Do you think silver ex would be a good substitute for those silver stickers a lot of RG kits come with? Some of mine are peeling off.
|
# ? May 11, 2023 17:34 |
|
It is, I've used mine in a few kits now.
|
# ? May 11, 2023 17:35 |
|
wdarkk posted:Do you think silver ex would be a good substitute for those silver stickers a lot of RG kits come with? Some of mine are peeling off. Actually yes! It's the exact same kind of shininess by my eye at least.
|
# ? May 11, 2023 17:36 |
|
big sigh I would have preferred fixed position hands but the kit doesn't come with them. Any good 1/100 aftermarket hands out there?
|
# ? May 11, 2023 22:31 |
|
Spitfires posted:
If you've got some Tamiya extra thin cement and take some care you could make fixed hands out of those pretty easy. Guess you'd have to choose and stick with weapons if you go that route though.
|
# ? May 12, 2023 04:51 |
|
Got a minor nitpick with the MODEROID Big O while I'm reading through the manual; Looks like the light-piping from the LED unit only lights up the eyes. Would've been cool if it did the whole transparent head section so it looks like it's gearing up to fire the Chromebuster.
|
# ? May 12, 2023 06:34 |
|
SnakesRevenge posted:If you've got some Tamiya extra thin cement and take some care you could make fixed hands out of those pretty easy. Guess you'd have to choose and stick with weapons if you go that route though. That might even just snap back into place, I had a set of similar hands have a digit come loose and it snapped back in just fine. In other news, the God Gundam arms I was having trouble with are both done. A small amount of glue was involved, but they're done.
|
# ? May 12, 2023 06:45 |
|
mllaneza posted:That might even just snap back into place, I had a set of similar hands have a digit come loose and it snapped back in just fine. I thought that too but the socket is widened too much. Maybe theres a way to coat the ball slightly to make it secure again, I've seen people mention super glue to that's worth a try. I hadn't actually thought of freezing it in a position, that could work well since I think I just need it to hold one gun.
|
# ? May 12, 2023 07:02 |
|
Spitfires posted:I thought that too but the socket is widened too much. Maybe theres a way to coat the ball slightly to make it secure again, I've seen people mention super glue to that's worth a try. Ive used a lick of nail polish to thicken up ball joints and that worked pretty well. My Reincar kept falling apart because the torso and hips are joined by a single ball joint that was way too loose. The polish fixed it entirely.
|
# ? May 12, 2023 07:42 |
|
Someone talk me down from pre-ordering the Moderoid Thunderjaw. I haven't dealt with Moderoid before - do these kinds of kits generally stick around for a while and/or get reprints? Or do I stand a decent chance of missing out entirely if I don't act fast?
|
# ? May 12, 2023 19:51 |
|
It depends, since all their kits are from licenses they don't directly own. There are some older ones that took a while to get reprints or haven't at all, but their newer stuff does tend to get them frequently enough (the Dynazenon one is on I believe its third run?). Since it's from a series that doesn't really show signs of going away any time soon I'd imagine that would be true for the Thunderjaw, but I couldn't tell you for sure. If your concern is in putting down the money right away, HLJ won't bill you until the kit comes out if you preorder through them. Justin_Brett fucked around with this message at 21:08 on May 12, 2023 |
# ? May 12, 2023 21:05 |
|
I had a goddamn emotional roller coaster today. I stopped at a Half Price Books, to buy some books, but they had a bunch of Gundam models! Really cheap too! HG Silver Bullet for 10 dollars, MG Jegan for 20! But when I looked closer, I noticed that the boxes had stickers on them that said "as-is". I opened the boxes, they were all built. But then, I noticed behind the counter they had a bunch more MGs, I asked, and those were unbuilt! And one of them was a FAZZ! I asked how much for the FAZZ, they said 150. Too rich for my blood, so I thanked them and walked away. But then, and it's important to understand that HPB is not a store where you haggle, it's a nationwide chain, the price is the price, but the guy said "how much you would be willing to pay for it?" Apparently they had had these MGs for awhile and sold not a one and they take up a huge amount of shelf space for merchandise that doesn't move. So that's how I got a MG FAZZ for 100 bucks. If any of you live near the NASA Parkway HPB, they have a bunch more MGs left. a Full Armor Gundam, a Crossbone of some kind, a ZZ, a Wing, like four or five others I can't remember, and you can talk them down to basically MSRP.
|
# ? May 13, 2023 02:35 |
|
I'm also eyeballing that kit. It looks like its way more detailed than you usually get from a kit so I'm guessing this is delivered without any color and you'll have to paint it yourself? If it came as detailed as the promo makes it seem I'd expect a heavier price tag than that.
|
# ? May 13, 2023 10:30 |
|
Mindblast posted:I'm also eyeballing that kit. It looks like its way more detailed than you usually get from a kit so I'm guessing this is delivered without any color and you'll have to paint it yourself? If it came as detailed as the promo makes it seem I'd expect a heavier price tag than that. It varies from kit-to-kit with the Moderoid line, but generally speaking they will try to achieve colour separation in parts most of the time. It's typically the fiddly detail bits they give up on, so I'd say keep some metallic blue paint and some orange paint onstandby. The grey inset pieces MIGHT be part-separated, or just aolid white/grey and left for paint to fix.
|
# ? May 13, 2023 10:48 |
|
it's taken awhile due to life responsibilities but I'm in the home stretch on my zaku build. did the panel lining last night and folks are right, it's incredible what a difference it makes. just gotta get the microscopic decals on and apply the topcoat and I'll be donezo, just in time for the RG sazabi that's on it's way
|
# ? May 13, 2023 15:46 |
|
Big O; In PROGRESS! So glad I painted the pistons and gold parts, they look gorgeous. I also did the red pieces on the sides of the head and the base of the pistons with a red metallic marker too for a little extra detail. It's a real simple build, but the range of movement is excellent and is about the same as in-show if that makes sense. You can even do the Chromebuster pose with both fists pressing against eachother in front of the chest. On a side-note, the silver striping on the ribs was pre-done on the kit. I suspect/hope there might be an accessory kit or something for this one down the line, because where the Moby Dick harpoons should be are individual tabs rather than just flat-moulded into the line of the hip. The Big O also lives up to the name and is indeed BIG. He'll be about Master Grade height like the other Moderoids by my eye, but I'd say as wide as two MG Gundams due to the arms and big stompy feet. Make sure you got some display room for this hefty lad if you get one.
|
# ? May 13, 2023 17:08 |
|
RG God Gundam progress ! Basic build complete!
|
# ? May 13, 2023 22:28 |
|
|
# ? May 13, 2023 23:18 |
|
|
# ? May 13, 2023 23:26 |
|
|
# ? May 13, 2023 23:28 |
|
cackling fuckin
|
# ? May 13, 2023 23:45 |
|
Me when I got into gunpla: Why do people have backlogs? I mean you just buy a kit and then build it easy peasy haha Me now: Hmm maybe I should buy a new shelf it's getting crowded with all these boxes in here
|
# ? May 14, 2023 00:32 |
|
Neddy Seagoon posted:
looking great so far. did you order from hlj? I did a pre-order from Gundam Planet and haven't heard anything yet
|
# ? May 14, 2023 03:08 |
|
Spitfires posted:looking great so far. did you order from hlj? I did a pre-order from Gundam Planet and haven't heard anything yet Yeah, I get all mine through HLJ.
|
# ? May 14, 2023 03:16 |
|
Finally got around to finishing this kit after leaving it for a few months. Really neat for my first RG. Noticeably more complex than the HGs I have though it didn't seem much more complex than the Digimon kits I usually build. Next step would be to stop being lazy and actually consistently sand away nibs instead of trying to polish scuff marks. I will say though that I could feel my eyeballs inverting while I was placing all the decals.
|
# ? May 14, 2023 05:05 |
|
Balache404 posted:I will say though that I could feel my eyeballs inverting while I was placing all the decals. Yeah, that's a thing with RGs. I've got the stickers to do on my RG God Gundam. I think I'm going to pick up another half-finished project and just bask in being finished building the thing. because that's a lot of loving stickers.
|
# ? May 14, 2023 05:21 |
|
mllaneza posted:Yeah, that's a thing with RGs. I've got the stickers to do on my RG God Gundam. I think I'm going to pick up another half-finished project and just bask in being finished building the thing. because that's a lot of loving stickers. I put on most of the decals, but the tiny circles or rectangles that are just gonna get lost were too much of a pain and you can't really tell anyway.
|
# ? May 14, 2023 05:26 |
|
https://twitter.com/MON0EYE/status/1657565074725249024?t=VIatXXMCXAp6NEt2eTWpkA&s=19 You know if the Michael's craft store in Canada got in on this it would make more sense.
|
# ? May 14, 2023 07:02 |
|
Balache404 posted:I put on most of the decals, but the tiny circles or rectangles that are just gonna get lost were too much of a pain and you can't really tell anyway. Get a molotow liquid chrome or Gundam marker EX silver for stickers like those.
|
# ? May 14, 2023 07:11 |
|
Arc Hammer posted:https://twitter.com/MON0EYE/status/1657565074725249024?t=VIatXXMCXAp6NEt2eTWpkA&s=19 I mean, we saw character role mattering when the show launched, with Aerials flying off the shelf, while Guel's suit was (initially) a shelfwarmer. Of course, that lead into a period when any Witch kit sold out almost instantly, but it's leveled off enough now that you see character impact again, with Aerial, basic Lfrith, and Pharact selling as fast as they can go onto the shelves (well, the original Aerial's slowed down a bit since so many people have it already, but it's still moving nicely), while I've seen Demi Trainers on a small discount to keep them from taking up too much space on display. Kit looks cool in the show, (or is associated with a character people think is cool) people are more likely to buy it. I was about to say that I doubted Shaddiq was unpopular enough for that display to mean anything but that they got a new shipment in, but looking at Japanese Amazon, his kit is one of the only HG gunpla selling for less than retail. Meanwhile, all of Guel's suits are selling at a small markup. (Of course, the new Zowort is selling for more than any other HG in the line right now just because it's cool and the supply is still limited, so it's not like the role in the show is the only thing.)
|
# ? May 14, 2023 09:02 |
|
This doesn't bode well for grunt kits...
|
# ? May 14, 2023 12:26 |
|
Michaelis isn't a grunt suit.
|
# ? May 14, 2023 13:14 |
|
The core problem kit-sales-wise is G-Witch is a show very much centered on the Aerial and its duels when it comes to combat. It's hard to work in some positive screentime for any other mecha that isn't a Gundam, because they just have a tendency to die in two seconds getting sliced to pieces. The closest is maybe the earthside combat scene from a few episodes ago, when a quartet of Heavy Zoworts got to show off, or the Daribalde facing off against Aerial.
|
# ? May 14, 2023 15:49 |
|
Double-posting because; BIG O; IT'S SHOWTIME! This thing is even taller than I thought it'd be, it's big indeed. I grabbed my HG Clear Barbatos as I figured it'd be the most "average"-size HG within reach for comparison. The Big O's about twice the size. Accessories are alright, you get the Cannon and Missile Party alternate chest parts, along with fixed "flat-palm" hands. There's also a teeny model of Roger Smith's car just as a simple black plastic piece on the runner, I gave the windows and front a go with the EX marker just for detailing and honestly think it turned out alright. My favourite little detail is the kit even includes the garage in the foot . The mechanism to open the door's nice and discreet too. A little fiddly, but quite simple to jiggle the ramp out. (It's actually in both feet, as they're identical parts). Unfortunately I don't have any LR41 batteries to-hand to show off the LED module lighting up the eyes, but I'll get another photo when I do. I will make mention that the top of the torso is basically just sitting in a groove and easy to remove (won't fall off on its own, but comes away easy when you deliberately want to lift it off), so it's easy enough to toggle the light switch on it by the feel of it. I feel they should've gone for a transparent yellow rather than just clear plastic for the eyes, because they don't pop much without the LED lighting them. Also one more note for anyone else getting this; Use a dab of modelling glue for the bolts on top of the head. They are fidgety little fuckers that like to pop off if you so much as breath near them.
|
# ? May 14, 2023 16:59 |
|
looks awesome nj it's decal night for the zaku and I'm hoping the weather clears up so I can go outside and spray so I can finish up
|
# ? May 14, 2023 19:02 |
|
Balache404 posted:I put on most of the decals, but the tiny circles or rectangles that are just gonna get lost were too much of a pain and you can't really tell anyway. This is the way. So is using a silver marker. Never do with stickers anything you could do with markers.
|
# ? May 14, 2023 19:07 |
|
Arc Hammer posted:https://twitter.com/MON0EYE/status/1657565074725249024?t=VIatXXMCXAp6NEt2eTWpkA&s=19 Michaelis is the most boring of the Begir-Beu derivatives. Even the one that's for elite (mooks Begir-Pente) is cooler.
|
# ? May 14, 2023 19:55 |
|
|
# ? May 28, 2024 15:37 |
|
https://twitter.com/nAEAXAXwxFDxlMU/status/1657601130464161793?s=20
|
# ? May 14, 2023 20:29 |