|
Re that floor, I have much the same stuff. I put a thin underlay under it, it's supposed to also give a bit more spring which is kinder to your feet, but I don't think it's strictly necessary. I did it as a floating floor and despite being engineered, the instructions still said 10mm expansion gap all round.
|
# ? Mar 8, 2024 00:53 |
|
|
# ? Jun 5, 2024 04:29 |
|
NotJustANumber99 posted:I've said before that the optimal house would have no visible storage but an ocado warehouse robot in the loft that would fetch whatever item and drop it through the ceiling to which ever grid square of the house needs it. Legit there's that dude in California I think? The one physics dude that made a run of klien bottles that dude to run requirements decided to sell the surplus. He turned his crawlspace into the storage area and has thousands of the things stored under his house, and collects them via a remote controlled car that picks up the boxes and brings them back. Everything labeled and in sections. Absolutely insane and awesome
|
# ? Mar 8, 2024 08:35 |
|
We've got very similar flooring (great choice imo, looks fantastic and is very practical). It does expand/contract a bit, it isn't really like plywood. We did one room ourselves floating, the pros did the big room and glued it down, both worked fine. I'd recommend an underlay for the floor feel but I think some types of glue are also meant to achieve a similar effect. If you mess up the joints a bit you can get this wood filler paste to put in small gaps and it's practically invisible.
|
# ? Mar 8, 2024 10:45 |
|
We got engineered oak throughout our open-plan downstairs, glued down. It's great, however our kitchen did flood which has caused a couple of bumpy expansion spots. Theyve pretty much gone down over the last few months by themselves though so hopefully it's all good with time. So uhh try not to flood your house?
|
# ? Mar 8, 2024 10:52 |
|
Lol, we did the same, figuring it was cheaper to do the same floor in the kitchen (making it just one job) than put tiles in, and we'll just replace that part with tiles if we ever need to. Haven't flooded it yet!
|
# ? Mar 8, 2024 10:55 |
|
Oh, and if you do tile on top of your UFH screed, make sure to use a decoupling mesh or whatever it’s called. Prevents the expansion and contraction of the screed from messing with your tiles.
|
# ? Mar 8, 2024 11:57 |
|
Really pleased you've got the heating to work. Well done. Coupla things: You need to use a special inhibitor in UFH systems with a biocide in it or something. Because it runs at lower temps than normal CH systems, there's a greater risk of mould growth blocking your pipes. I had bamboo floor in the flat on an underlay. Because the pirate that did it couldn't use levelling screed to get a level surface, it had a poo poo load of bouncy points. We went for glued down in the new house. There's less cushioning, but also no patches that feel like a loving diving board. We splashed out for the posh manufacturer's recommended adhesives too, rather than a screwfix special. Definitely worth the money. If your UFH screed is a calcium sulphate screed, some tile adhesives don't like it.
|
# ? Mar 8, 2024 14:48 |
|
NotJustANumber99 posted:Yeah. Not like to chuck out excuses or anything cos there really arent any big enough but yeah The initial foundation setback and covid basically shifted the entire build from quick and easy into long and laborious. The more time I had to stew, the more internet holes I could fall down and the more obnoxious I could make the whole build. There have been some other work/life/death issues that have also impacted things I guess. Also like I was just totally naïve about how long poo poo would take. Like I have spent the last almost full week just sellotaping. There was no week of sellotaping on the original Gannt chart and yet in reality this has been like the probably fourth full week of just sellotaping. In life, as in software development, you take the engineering estimates and quadruple them. And then you're maybe getting decently close to how long it actually takes. NotJustANumber99 posted:This si for the bedroom wing. the great room wing will be the tiles or stone or whatever. What I havent figured out is if I should use an underlay or what? Like forums seem to suggest the underlay is about sound transmission which isnt really an issue on the ground floor. But I kind of think a slightly squishy underlay might be a useful thing to have to average out the imperfections in the screeded slab rather than trying to lay directly on it? Having recently done some flooring, I would highly recommend at least some underlay. Having no flex at all when walking around on wood is actually quite hard on your feet/legs over a long time. I would also never glue plank floor down. I don't care what the manufacturer says. If you ever need to replace pieces or even just decide to change the floor you'll have a grand time scraping that up. Also we'll probably find out in 20 years that whatever adhesive you use gives you 5 kinds of cancer.
|
# ? Mar 8, 2024 15:00 |
|
NotJustANumber99 posted:yeah its engineered oak I have the same but with a thicker top layer. Mine is nailed to the wooden floor beneath with 50mm flooring nails, so maybe you'll need to drive 5m piles through each length of yours. Best call the engineer.
|
# ? Mar 8, 2024 21:26 |
|
I’m gonna go on a big Husqvana rant in about an hour
|
# ? Mar 9, 2024 17:50 |
|
the robot!
|
# ? Mar 9, 2024 18:30 |
|
Jaded Burnout posted:I’m gonna go on a big Husqvana rant in about an hour
|
# ? Mar 9, 2024 18:35 |
|
I meant to post that in my thread sorry, it is not relevant to proceedings here
|
# ? Mar 9, 2024 19:27 |
|
Unless something's gone seriously wrong with the geo fencing
|
# ? Mar 9, 2024 19:42 |
|
Hey who took my car, and why's there grass cuttings in the driveway
|
# ? Mar 9, 2024 19:44 |
|
Jaded Burnout posted:I meant to post that in my thread sorry, it is not relevant to proceedings here I'd like to read said rant, link plz..
|
# ? Mar 9, 2024 19:49 |
|
Trainee PornStar posted:I'd like to read said rant, link plz.. https://forums.somethingawful.com/showthread.php?threadid=3824923&pagenumber=103#post538260334
|
# ? Mar 9, 2024 19:57 |
|
Jaded Burnout posted:https://forums.somethingawful.com/showthread.php?threadid=3824923&pagenumber=103#post538260334 nice one
|
# ? Mar 9, 2024 20:05 |
|
I think i'm weird but i hate the hollow clacky sound of floating boards on concrete. i got the our floor glued down purely because of that. the special adhesive they want you to use is crazy expensive though.
|
# ? Mar 10, 2024 04:43 |
|
Granite Octopus posted:I think i'm weird but i hate the hollow clacky sound of floating boards on concrete. i got the our floor glued down purely because of that. the special adhesive they want you to use is crazy expensive though. We have a floating wood floor on concrete with a 1/4 inch underlay and it's silent.
|
# ? Mar 10, 2024 16:03 |
|
Granite Octopus posted:I think i'm weird but i hate the hollow clacky sound of floating boards on concrete. i got the our floor glued down purely because of that. the special adhesive they want you to use is crazy expensive though. This is why underlay exists.
|
# ? Mar 10, 2024 18:57 |
|
I've got floorboards like that, installed by (not literally by, she hired someone) the previous owner. They're glued down and the floor feels great but there is a major downside. I've got a floorboard badly dinged up by furniture and replacing it would be a messy, time consuming pain in the rear end. If they weren't glued down I assume it would be a lot easier.
|
# ? Mar 10, 2024 23:49 |
|
Splode posted:I've got floorboards like that, installed by (not literally by, she hired someone) the previous owner. They're glued down and the floor feels great but there is a major downside. I've got a floorboard badly dinged up by furniture and replacing it would be a messy, time consuming pain in the rear end. If they weren't glued down I assume it would be a lot easier. Still a huge PITA depending on where the board is in the room.
|
# ? Mar 11, 2024 02:45 |
|
VelociBacon posted:Still a huge PITA depending on where the board is in the room. It's in the middle. I'm just going to leave it there forever.
|
# ? Mar 11, 2024 08:39 |
|
[Speedy Gonzales voice] Underlay! Underlay!
|
# ? Mar 11, 2024 09:15 |
|
Such a fuckin dad joke
|
# ? Mar 11, 2024 11:53 |
sebzilla posted:[Speedy Gonzales voice] Underlay! Underlay! Cancelled
|
|
# ? Mar 11, 2024 23:48 |
|
Y'all just jealous
|
# ? Mar 12, 2024 07:09 |
|
sebzilla posted:[Speedy Gonzales voice] Underlay! Underlay! I understood that reference!
|
# ? Mar 12, 2024 08:19 |
|
Jaded Burnout posted:Such a fuckin dad joke 9 years of this poo poo finally paying off
|
# ? Mar 12, 2024 15:36 |
|
sebzilla posted:9 years of this poo poo finally paying off I didnt initially get the context here and was about to aggressively defend myself against this taking 9 years but the time it took me to make sure counting on my fingers allowed me to realise what was actually being said. So I've had to leave the cocoon like warmth and safety of the pant room to deal with the rest of this loving disaster. bathrooms. but before that an easy win. Install a google smoke alarm and a few more downlights where painting has been done Havent pulled the battery tab on it as theres still no internet and I dunno what it would do without? BT have again extended the deadline without hitting it. It was 15th march, this friday. They've now pushed it to 22nd. So another week. Who knows? Can't remember if I already shared this? think I did? But having the heat on is defo causing some drying out. Got the MVHR running full blast, which you can defo hear. Weirdly it is still reading the internal humidity really high even though it feels a lot better. So like every doorway the wooden doorframe has split away from the plasterwork. It won't matter as it will be covered by the architrave but a definite sign that the heating has made a difference Anyway yeah about that and bathrooms. All the cheap oak worktops I chopped up previously have warped to poo poo and actually snapped apart at the glue joints in pretty much every piece. The second worktop that had been left wrapped and untouched doesnt seem to have suffered the same fate so I've opened that and chopped it up with a slightly less ambitious plan to make the bathroom vanities. I'll hide the joint at the top with an overlap which is less cool but maybe more achievable. Also bought a couple of big clamps. Using an old piece of packing oak from the oak beam lot as the back piece as its substantially skinnier than the worktops. Means I can attach it with hidden screws but is demountable to get back to gently caress with the plumbing. Turn upside down to cut out slot for waste pipe test in situ with made up front leg hmm didnt really photo it but bought some oak dowel from b&q that was extortionate to cap the screw joints. you can't really see it too much which I guess means it was successful. Whacked in some stopper pieces of wood either side to hold the unit in place for proper bolting in. It already feels pretty good. I've got an absolute hotch potch of bolts and rods and whatever and start smashing them all in wherever I cannot find the right socket so lol gotta do all the slightly bigger ones by hand with a loving spanner. Takes ages And is a massive ballache on the inside of the unit. Lol I've made things really complicated with the 15 goes at the woodwork But... kick the temporary leg away and smashed it Cantilevered the gently caress out of this I am a god of carpentry, bow before me naysayers Yes it's a bit random Lol and heres the taps. Lol I've got the hot and cold on the wrong sides. they will need to figure out crossing over but thats doable be something like that waste sink! pretty sure I could stand on it But I wont. I'm basically a success story edit. also forgot to say page 99 posting! NotJustANumber99 fucked around with this message at 01:39 on Mar 13, 2024 |
# ? Mar 13, 2024 00:30 |
|
Did you leave that much extra on every cable? If so you probably bought 2x more cable then you need
|
# ? Mar 13, 2024 01:18 |
|
That's kind of a lot of turds on the floor.
|
# ? Mar 13, 2024 02:03 |
|
you google it. theres no normal number
|
# ? Mar 13, 2024 02:06 |
|
I will admit that I didn't do any research.
|
# ? Mar 13, 2024 02:10 |
|
As someone who lives in a new build I can tell you the standard is sweet gently caress all
|
# ? Mar 13, 2024 09:42 |
|
Towards L shape architecture:NotJustANumber99 posted:Lol I've made things really complicated
|
# ? Mar 13, 2024 10:33 |
|
L O LOL
|
# ? Mar 13, 2024 10:47 |
|
NotJustANumber99 posted:pretty sure I could stand on it you should i don't know gently caress all about building or bathrooms or wood, but will you need to seal it protect that thing somehow? it's gonna get a lot of water on it, which i think is bad for wood??
|
# ? Mar 13, 2024 11:08 |
|
|
# ? Jun 5, 2024 04:29 |
|
NotJustANumber99 posted:So I've had to leave the cocoon like warmth and safety of the pant room to deal with the rest of this loving disaster. You get used to it. The best part of my day is leaving the pant room.
|
# ? Mar 13, 2024 11:27 |