|
Costco has some Greenworks stuff on sale. I picked up a string trimmer and a leaf blower for $199 each. The string trimmer comes with a shoulder strap and like 15 pre-cut string refills, which is super nice. Replaced my Dewalt that chewed through line like crazy. The leaf blower is 800 CFM / 200 mph and also replaced a Dewalt that was like 400 CFM / 90 mph. I can’t believe how loving loud this one is. If you go full throttle, you definitely need ear pro. And it even has a turbo button. It comes with a battery, charger, couple different tips and also a shoulder strap.
|
![]() |
|
![]()
|
# ? May 30, 2024 22:20 |
|
Anyone have a recommendation for a decent bolt/nut size/thread checker? I see ones that look like slightly fancier version of what you see in the fasteners aisle at Ace, but some are in the range of $40-60. Seems a tad overpriced, no? This is "only" $35: https://www.amazon.com/Comfylichi-Thread-Checker-Nut-Bolt/dp/B0CS6BYSCN I then see the other end of the spectrum with ads on IG and such for $10 ones from places like Temu and Aliexpress, but can I trust their sizes are accurate?* Then there's this one I saw that's not too pricey, and seems to have the advantage that the pieces aren't attached to anything, so I can easily take the size-checker to the bolt/nut in question to check what size it is. https://www.amazon.com/Giwaelro-Nut-Bolt-Thread-Checker/dp/B0CH3KVS9X/ Seems a little handy? Like, let's say there's something missing a bolt (I don't know what, let's say a mounting bolt for something on my lawnmower) but the other bolt is still in place. I could, in theory, use these to easily get the size and not have to guess/remove the "good" one to find out. I know there's also similar ones where all the size-checkers are attached on wires, but this seems little easier not being attached, though certainly easier to lose a single piece of the set. I guess I could also just go to the hardware store and buy 1x of the most common metric and US sizes for nuts and bolts, and I suppose if the average price of each piece is under $0.50, it would be cheaper, but is it worth my time? This set also clearly looks nicer than whatever weird box I'd throw them all in. *Yeah, I know they almost certainly come from the same factory. And I'm actually not finding the super-cheap one that was advertised to me the other say, even Temu ones are like $30 now. Probably was some sort of "fake" price or the product was just one of those cheapo plastic size checkers that's just holes, but with the picture of the fancier one. DrBouvenstein fucked around with this message at 17:35 on Apr 1, 2024 |
![]() |
|
As a best of both worlds I have one of these: https://www.amazon.com/gp/product/B003FJW0GK Keeps everything together, portable so I can use it on studs, but haven't found a situation where everything being tied together is a real problem for access. Slightly awkward, sure.
|
![]() |
|
Saw this on r/woodworking so I had to check against Wen's own upload of the manual and sure enough:![]()
|
![]() |
|
DrBouvenstein posted:
If anyone was thinking about this one, it is also on ali for less than amazon. The colors are still backwards though. ![]() https://a.aliexpress.com/_mNkqS30
|
![]() |
|
I bought this one last week and I haven't used them yet but they seem fine? Just tiny threaded aluminum guys https://www.amazon.com/dp/B0CGLKJSM4 It's not visible from the pictures, but they all have holes drilled in them, so you could thread them on a string if you desired that instead at some point. They're probably all the same like you said, so just get whichever set has the sizes you want.
|
![]() |
|
Does anyone have a recommendation on ball end allen wrench sets? I was looking at Wera and Wiha but both have a whole bunch of sets, and I haven't had time to see how they differ
|
![]() |
|
Slanderer posted:I bought this one last week and I haven't used them yet but they seem fine? Just tiny threaded aluminum guys Why do it yourself? I've been really happy with this one, and they have versions with 32 or 42 gauges. Haven't run across one that wasn't on here though. CKE Nut & Bolt Thread Checker (Inch & Metric) - 26 Male/Female Gauges,Stainless Steel - 14 Inch & 12 Metric https://a.co/d/5e9NBYM
|
![]() |
|
Slanderer posted:Does anyone have a recommendation on ball end allen wrench sets? I was looking at Wera and Wiha but both have a whole bunch of sets, and I haven't had time to see how they differ Bondhus. IMHO they're the gold standard. Very reasonably priced, too. I have sets of the GoldGuard, the short arm, the T-handles, and several more.
|
![]() |
|
Bob Mundon posted:Why do it yourself? I've been really happy with this one, and they have versions with 32 or 42 gauges. Haven't run across one that wasn't on here though. Because I'm a sucker for little tool and equipment cases, thats why! sharkytm posted:Bondhus. IMHO they're the gold standard. Very reasonably priced, too. I have sets of the GoldGuard, the short arm, the T-handles, and several more. Thanks, I'll take a look
|
![]() |
|
Sounds like table saw safety features are going to be mandatory and SawStop will wave the 840 patent. https://www.youtube.com/watch?v=nxKkuDduYLk
|
![]() |
|
I thought he's alarmist about the "It will make cheap saws disappear!" part, because I fully expect any legislation to be watered down by some clause that exempts/grandfathers in a whole swath of products. And the argument that people should use proper technique and existing safety precautions... well yeah, but we have decades of proof that doesn't really work because people are idiots. So... good. Get that poo poo on the books asap. Related, I suppose: https://i.imgur.com/07ykNNE.mp4
|
![]() |
|
When the #1 joke about your occupation is the number of amputations, then yeah some additional regulations are probably in order.
|
![]() |
|
Calidus posted:Sounds like table saw safety features are going to be mandatory and SawStop will wave the 840 patent. Why on earth would I want to listen to someone monologue at me for 15 minutes when I could read even a poorly edited article in like... 1 minute. Truly I will never understand YouTube and its appeal to anybody for anything.
|
![]() |
|
For those who prefer articles: https://www.nytimes.com/2024/03/30/upshot/table-saws-safety-cost.html
|
![]() |
|
Calidus posted:Sounds like table saw safety features are going to be mandatory and SawStop will wave the 840 patent. If they actually waive the patent then fine but we are talking about some extremely litigatious fucks and we've been down this road more than once. A vague assurance and some insulting quips from someone who has done everything possible to prevent competitors from making a competing product does not assure me. Saw stop has patents until 2033.
|
![]() |
|
Didn't their most important patents already expire though?
|
![]() |
|
HappyHippo posted:For those who prefer articles: https://www.nytimes.com/2024/03/30/upshot/table-saws-safety-cost.html Thank you. Paywall-free link:https://archive.is/mNNFG
|
![]() |
|
HappyHippo posted:Didn't their most important patents already expire though? Yeah 840 (the one they are promising to give away) is already expired, so not sure what the hubbub is. They have a slew of other patents that last through 2033 though which is likely why bosch never came back. The cartridge, for example, expires 2024. Edit: The game is likely this patent: https://patents.google.com/patent/US11098849B2/en which expires in 2037. And is very clearly not the one the CEO promised to give away. Feldman: “I am hearing no licensing commitments, or otherwise with respect to anything beyond the ‘840 patents. You provided quite a lengthy list of other patents that are related to your technology and -“ SawStop: “…I am excited about having those conversations. But these conversations … are complex, and they can’t be captured in a sound bite that’s convenient for this venue.” Edit: also SawStop refused to license the tech to Grizzly. deimos fucked around with this message at 14:30 on Apr 4, 2024 |
![]() |
|
It's not like Bosch is in the business of selling table saws *cheaper* than what Sawstop's offering and I don't think they'd be otherwise better saws so I'm unclear on why anyone not employed by Bosch would be asked to give a poo poo about that. I guess if sawstop goes mad with power and starts charging a million dollars per saw once their totally unassailable monopoly on the market is secured forever that'd be... bad? But it's many degrees removed from anything that's happened.FISHMANPET posted:Why on earth would I want to listen to someone monologue at me for 15 minutes when I could read even a poorly edited article in like... 1 minute. A Wizard of Goatse fucked around with this message at 15:33 on Apr 4, 2024 |
![]() |
|
FISHMANPET posted:Why on earth would I want to listen to someone monologue at me for 15 minutes when I could read even a poorly edited article in like... 1 minute. I listened to this on my 2nd monitor while I was playing Balatro, but I generally agree with the Christ, article a video sentiment. Danhenge fucked around with this message at 15:25 on Apr 4, 2024 |
![]() |
|
FISHMANPET posted:Why on earth would I want to listen to someone monologue at me for 15 minutes when I could read even a poorly edited article in like... 1 minute. I'd listen to it on a podcast if it was there, but instead I play YouTube and turn the screen off. I used to like his videos but it's turned ever more into a shillfest and it's hard not to notice the middling channels like that one veer ever harder towards chase-the-views stuff. Couple that with the outbursts of crotchety-old-fartism and, nah.
|
![]() |
|
FISHMANPET posted:Why on earth would I want to listen to someone monologue at me for 15 minutes when I could read even a poorly edited article in like... 1 minute. Truly. But also, people really ought to consider if they need a table saw in the first place. From watching Youtube you'd think you need one just to get out of bed in the morning, let alone do any woodworking, but you really don't. There's many ways to do it that don't require a
|
![]() |
|
Table saws are definitely overused but they're also really handy and can do the work of many other tools to high precision. They haven't achieved the legendary status of radial arm saws yet but I wouldn't be surprised if we see a push away from them over time. Especially if new ones suddenly start costing $300 more for entry level. My only real problem with the breaks as a standard feature is that the sawstop guys have blatantly showed that they aren't acting in good faith in the past. It wouldn't even really impact me personally because I'll just keep using my ancient oliver.
|
![]() |
|
tracecomplete posted:I'd listen to it on a podcast if it was there, but instead I play YouTube and turn the screen off. My sense from listening to Steve Ramsay talk about it is that build videos don't really work with the algorithm anymore, so you gotta do hot takes and sponsorships if you want to make any money.
|
![]() |
|
If you want to succeed as a YouTube woodworker, choose one of the following tasks: 1. 17 HOT NEW TOOLS I GOT FROM TEMU ARE THEY WORTH IT? <mr beast face, red arrow> 2. SIX OF MY PREVIOUS VIDEOS, SMASHED TOGETHER INTO ONE THREE HOUR VIDEO, BECAUSE THE ALGORITHM IS ALL ABOUT LONG-FORM CONTENT RIGHT NOW 3. gently caress it man, just sling sponsorships
|
![]() |
|
Sockser posted:If you want to succeed as a YouTube woodworker, choose one of the following tasks: 4. I BOUGHT 30 CRATES OF RETURNED TOOLS, LET ME OPEN THEM AGONIZINGLY SLOWLY ON CAMERA AND NOT EVEN TEST IF THEY WORK OR ANYTHING THEN CLAIM I GOT 2x THE VALUE OF WHAT I PAID FOR THE CRATES
|
![]() |
|
Man wouldn't it be sweet if there was some bygone era where woodworking youtube and the hobby magazines before them were about all the ways to use a pile of dead sanding belts and/or how to run a real business and not, like, a festool circus and someone's cool trick where they take 700 hours to make a kind of coffee table it's normally impractical to manufacture There's always been a huge disconnect between production woodworking , where a table saw means the capacity to bang through a thousand-plus extra bucks of work a week and a one-time $300 expense is nothing unless your existing plan is to just fire anyone who gets injured, and hobbyist woodworking, where office guys who make more adjusting spreadsheets than anyone who doesn't own a large factory will ever make in professional woodworking blow all their discretionary money on toys to produce the type and quantity of stuff they could honestly get done just fine with a hand saw and chisel, except they don't want to. From what I can tell the latter by and large are starting to reevaluate whether they really need a table saw and determining that no, what they really need is a 4x8 CNC router A Wizard of Goatse fucked around with this message at 20:07 on Apr 4, 2024 |
![]() |
|
A Wizard of Goatse posted:There's always been a huge disconnect between production woodworking , where a table saw means the capacity to bang through a thousand-plus extra bucks of work a week and a one-time $300 expense is nothing unless your existing plan is to just fire anyone who gets injured, and hobbyist woodworking, where office guys who make more adjusting spreadsheets than anyone who doesn't own a large factory will ever make in professional woodworking blow all their discretionary money on toys to produce the type and quantity of stuff they could honestly get done just fine with a hand saw and chisel, except they don't want to. That seems more like ![]() than a disconnect though. I mean, I'm a spreadsheettoucher by weekday and a woodtoucher ( ![]() (I have access to two SawStop cabinet saws through the local makerspace, which has ruined all other tools for me)
|
![]() |
|
totally, there's just nobody in this equation who legitimately needs to cut a couple hundred in safety equipment out of the budget, and everyone either needs or wants a table saw little old coot youtube where they stick to like a $30/40 hour project budget and are whittling a chair with a pocket knife would be chill as hell but it never existed and apparently about six other people would watch it A Wizard of Goatse fucked around with this message at 20:29 on Apr 4, 2024 |
![]() |
|
Danhenge posted:My sense from listening to Steve Ramsay talk about it is that build videos don't really work with the algorithm anymore, so you gotta do hot takes and sponsorships if you want to make any money. Sure, but one can also simply not be youtube (Steve can stay though. We like Steve in this house. Will forgive him his bag-security.)
|
![]() |
|
A Wizard of Goatse posted:little old coot youtube where they stick to like a $30/40 hour project budget and are whittling a chair with a pocket knife would be chill as hell but it never existed and apparently about six other people would watch it https://www.youtube.com/watch?v=QBeOgGt_oWU If they're good enough people would be fascinated by what they end up whittling and the cutting noise would have an ASMR quality to it.
|
![]() |
|
This guy is really enjoyable though, and seems to do pretty OK for himself as a side-youtubist https://www.youtube.com/watch?v=XoHXEprhgM4
|
![]() |
|
Speed painting and speed carving videos seemed to be popular for a while but the algorithm giveth and taketh and is especially capricious. The only thing that seems consistent is that it constantly gets worse. Like when you train a gpt on other gpt outputs or xerox a xerox to many times.
|
![]() |
|
Just Winging It posted:Truly. But also, people really ought to consider if they need a table saw in the first place. From watching Youtube you'd think you need one just to get out of bed in the morning, let alone do any woodworking, but you really don't. There's many ways to do it that don't require a That's kinda where I landed when I was table saw shopping. The small jobsite ones would have annoyed me and not been much more useful than the alternatives that I already had and I couldn't justify the space or cost for a proper big saw if I'm just doing house projects. This talk of patents and such reminds me of the Home Depot lawsuit with the radial arm saw safety device. They lowballed the inventor with a figure that didn't even cover his costs, and then paid to have another vendor copy the patented design off of measurements and photographs. https://en.wikipedia.org/wiki/Powell_v._Home_Depot_USA,_Inc. Home Depot was spending over $1M/yr just to cover injury claims from those saws and was considering removing them. The saw guard that stopped it from eating fingers made the saws profitable again.
|
![]() |
|
A Wizard of Goatse posted:Man wouldn't it be sweet if there was some bygone era where woodworking youtube and the hobby magazines before them were about all the ways to use a pile of dead sanding belts and/or how to run a real business and not, like, a festool circus and someone's cool trick where they take 700 hours to make a kind of coffee table it's normally impractical to manufacture Sensible thinking. Flattening big stock is just impossible without a 4x8 CNC router. Or any stock really. Who needs a jointer and thicknesser when you can use a CNC?
|
![]() |
|
I like my Delta tablesaw but I gotta admit that I'm thinking about ditching it to get the space back for a longer/larger workspace on which our lord and savior the tracksaw can do more embiggened cuts. Getting a router that also rides on a tracksaw rail has been a huge thing, too, to replace dadoes. I do not want a 4x8 CNC though. I'll be very happy with a 2x2 that I can fold up and get out of the way later, because who wants to gently caress with MDF by hand
|
![]() |
tracecomplete posted:I like my Delta tablesaw but I gotta admit that I'm thinking about ditching it to get the space back for a longer/larger workspace on which our lord and savior the tracksaw can do more embiggened cuts. Getting a router that also rides on a tracksaw rail has been a huge thing, too, to replace dadoes. I might be moving homes and need to decide if i should do another table saw based shop or not. What kind of router/track/saw did you get and any major pros/ cons you like for it? Mostly having a harder time thinking about reliable rip cuts on sheet goods and cutting dadoes without a table saw
|
|
![]() |
|
I have a Makita cordless tracksaw. It cuts stuff. I would get the Makita corded tracksaw if I could have a do-over, because my tracksaw never leaves its vacuum buddy. I generally cut the cords off my corded power tools and attach twist-locks instead, so my vac hose has a permanent extension cable on it to plug into whatever tool I'm using (and I have an adapter I made for my Domino). Tracks are tracks, in my experience. I have a 55" Makita track because it was the only more-than-4-usable-feet track I could find but I also have a couple Wen tracks that join together for a longer run. I also have one short Festool track that came with my MFT. Aside from length, I genuinely do not perceive a difference. aside: I really think the MFT top helps a lot with a tracksaw-first workflow. It makes a lot of cuts a lot easier. But really just the top, because the table itself kind of sucks unless you pay even more for cross-braces and even then it's really meant more for portable use. The rails on the side of the table can be handy but I am less sold on the flip-down track for crosscutting; it isn't bad but I think rail squares have gotten so much cheaper that they're a better option. But when I build my next bench, I'm absolutely going to buy or have CNC'd a couple of MFT tops that I'm going to use as the top of torsion boxes because they're really really useful. I have a few routers for different things. The Skil is mostly for regretting, because its base layout kinda sucks for a router table and the DW618 I got later (and designed/3D printed a router track adapter for) is more comfortable to use for long runs. The metric standard Bosch everybody buys also seems totally fine. tracecomplete fucked around with this message at 01:48 on Apr 5, 2024 |
![]() |
|
![]()
|
# ? May 30, 2024 22:20 |
|
lmao the coward disabled comments: https://i.imgur.com/YMx79wP.mp4 quote:timothyclarkfurniture
|
![]() |