|
Problem description: Have a bit of a mysterious issue. My desktop PC (Windows 10) will randomly lose its network (wired) connection, but only when I'm not using it to stream to my TV with Steam Link. The computer is plugged into my router, as is the Steam Link. When it's using the Steam Link, I never have any issues at all, ever. But when I'm just on the computer itself, it will go to 'no connection' seemingly randomly, start working again after a bit, stop, start, etc. Some days it's worse than others. No other devices on my local network have this issue. I'd guess there was an issue with the hardware except that it literally has never happened while streaming, which I do for most of the day so I'm very confident in saying it never happens then. Not using wifi at all for either device. Not sure what other info might be helpful in figuring this out but happy to provide. Attempted fixes: I don't have any ideas - everything appears to be working correctly, no driver issues, troubleshooting hasn't turned up anything. Recent changes: No, this has been happening for quite some time, I can't remember when it first started. -- Operating system: WIndows 10 System specs: 16GB RAM, i7-4790k, ASUS Maximus VII Hero Z97 ATX motherboard, EVGA 750W 220-G2-0750-XR PSU, 2x Nvidia 970 (SLI). Router is Netgear N900 Location: US I have Googled and read the FAQ: Yes
|
# ? Jul 25, 2019 13:07 |
|
|
# ? Apr 29, 2024 20:25 |
|
-Make sure you're using the latest firmware for the Netgear N900. -Try connecting the computer to a different port on the router. -Also, use a different cable if possible.
|
# ? Jul 27, 2019 23:34 |
|
I got a USB Ethernet stick and using that I didn't have any issues (only for a day, but still significant.) I guess it must be a hardware or driver issue with my motherboard's ethernet? Like if it's constantly in use like while streaming it can stay up, but if it runs out of things to do for some reason it just shuts down? Hopefully this keeps working in any case, knock on wood. If this stops working I'll try the router firmware upgrade, I'm sure it's out of date. Edit: Upgraded the firmware anyways, seemed like a good idea. Mozi fucked around with this message at 13:53 on Jul 29, 2019 |
# ? Jul 29, 2019 13:48 |
|
Mozi posted:I guess it must be a hardware or driver issue with my motherboard's ethernet? It is possible. You could try the latest Ethernet drivers if you haven't already: https://downloadcenter.intel.com/download/25016/Intel-Network-Adapter-Driver-for-Windows-10
|
# ? Jul 29, 2019 21:40 |
|
I installed those drivers, switched to a new cable, and used a new port on my router. Problem still comes back pretty much immediately when I use my old ethernet port, still goes away again when I switch to my USB adapter port. The Intel connection diagnostics say just: Connection Test Results [7/30/2019 1:45:12 PM] : Connection Status : Failed This adapter does not have link. Make sure the cable is connected and the speed and duplex settings are configured correctly on the adapter and link partner. Cable Link Status : Failed This adapter does not have link. Make sure the cable is connected and the speed and duplex settings are configured correctly on the adapter and link partner. when I run them when it's disconnected. When I run the tests while it's up, everything passes (cable, connection, and hardware.)
|
# ? Jul 30, 2019 18:54 |
|
|
# ? Apr 29, 2024 20:25 |
|
Malware/viruses could cause behavior like this. You could run these programs if you want: https://www.bleepingcomputer.com/download/rkill/ https://www.bleepingcomputer.com/download/adwcleaner/ https://www.bleepingcomputer.com/download/junkware-removal-tool/ Also, make sure you're on the latest motherboard BIOS: https://www.asus.com/us/Motherboards/MAXIMUS_VII_HERO/HelpDesk_Download/ If none of that helps then a good way to isolate this issue to being a software/hardware problem would be to use a Live CD with a Linux distribution on it. If your Ethernet still has issues on Linux then it's 100% some kind of hardware issue. If it works on Linux then W10 has some issue. Another quicker option would be trying safemode with networking enabled.
|
# ? Jul 30, 2019 21:50 |